What Is a VESA 600 x 400 Mount and Which TVs Need It? | Hole Spacing Explained

A VESA 600 x 400 mount fits a TV whose four rear holes sit 600 mm apart horizontally and 400 mm apart vertically, measured center to center.

Those two numbers describe the rectangle of threaded holes on the back of the set—roughly 23.6 by 15.7 inches—and nothing about the bracket’s style. A fixed, tilting, full-motion, ceiling, or stand mount can all carry the pattern, but only if its published VESA range includes 600 x 400. The number is a physical interface, so it has zero connection to Roku, Google TV, webOS, Tizen, Fire TV, firmware, or which streaming plans you pay for.

The pattern turns up mostly on very large screens, generally 75 to 100 inches, and plenty of 85-inch models carry it. Screen size alone proves nothing, though. Two TVs with the same diagonal can use different hole patterns, and some big sets use 800 x 400 or 800 x 600 instead. The model’s spec sheet or manual is the only authority.

How Do You Read the 600 x 400 Numbers?

The first figure is always horizontal and the second is always vertical. A 600 x 400 pattern means 600 mm between the centers of the left and right holes, and 400 mm between the centers of the top and bottom holes.

Order matters more than people expect. A 400 x 600 pattern flips the orientation and will not line up with a bracket drilled for 600 x 400. Manufacturers publish these measurements in millimeters, and a mount sold as covering a range like 200 x 200 through 600 x 400 usually handles the intermediate sizes inside that span—still worth confirming against the maker’s compatibility chart rather than assuming.

Which TVs Actually Need This Pattern?

A TV needs a 600 x 400 mount only when its own rear holes measure 600 x 400. LG’s LSW640B EZ Slim Wall Mount lists that pattern and pairs with specified 2024 LG sets, including the 86-inch QNED90T, QNED85T, QNED80T, and UT80 series; LG rates it for a maximum of 165 lb.

Beyond single-model examples, the pattern is niche. Treat that as a database analysis, not an industry census—useful for a sense of scale, not a compatibility guarantee.

Once you have confirmed the pattern, the next step is choosing hardware rated for your set’s weight and wall. A tested roundup of mounts that fit the 600 x 400 pattern covers the weight limits and clearance specs side by side.

How Do You Confirm a Mount Fits Your TV?

Measure the TV’s own holes first, then check the mount’s numbers against them. Skipping either half is how people end up with a bracket that arrives and doesn’t fit.

  1. Find the four threaded holes on the rear panel.
  2. Measure horizontally, center of hole to center of hole.
  3. Measure vertically, center to center.
  4. Confirm the result reads 600 x 400 mm, or look up the exact model in the manufacturer’s manual.
  5. Check that the mount’s published VESA range explicitly includes 600 x 400.
  6. Confirm the mount’s weight rating exceeds the TV’s weight without its stand.
  7. Check supported screen sizes, wall type, installation method, and clearance needs.
  8. Use the screw diameter, length, spacers, and washers specified for your exact TV and mount.

Sony’s guidance on VESA hole patterns for TV wall mounts walks through the same measuring method, and Vogel’s maintains a 600 x 400 mount category if you want to see how makers list the spec. LG’s LSW640B product page shows a real example of the pattern stated in a manufacturer’s own specs.

What Do People Get Wrong About 600 x 400?

Most failures come from assumptions rather than measurement errors, and the pattern tells you nothing about screw size.

  • Assuming size equals pattern. Not every 75-inch or 85-inch TV uses 600 x 400.
  • Reversing the numbers. 400 x 600 is a different orientation, not a typo.
  • Measuring hole edges. Center to center is the only correct reading.
  • Ignoring the weight limit. A mount can hit the right VESA size and still be rated too light.
  • Using screws that are too long. Excess length can bottom out inside the TV before the bracket tightens.
  • Skipping spacers. Curved or recessed backs usually need the manufacturer’s spacers.
  • Forgetting cable clearance. Connectors, recessed holes, and removable rear panels all eat space.
  • Trusting the word “universal.” A broad claimed range is not proof it fits your model.

Mounting hardware belongs on a structurally suitable wall, using the anchors the manufacturer specifies or direct framing. The bracket must sit level, every fastener tightened per the instructions, and the TV locked against accidental release. Large screens often take two people. Where the TV manual and the mount instructions disagree, the TV manual wins.

Common Questions

Is 600 x 400 the same as 400 x 600?

No. The first number is horizontal and the second is vertical, so 400 x 600 describes a taller-than-wide hole rectangle. A bracket drilled for 600 x 400 will not align with it, even though the same four numbers appear.

Can a smaller TV have this hole pattern?

It is uncommon but possible. The pattern shows up mostly on sets between 75 and 100 inches, yet hole spacing is chosen by the chassis design, not the diagonal. Always measure the TV’s own holes or check its manual instead of inferring from screen size.

Does a VESA number tell me which screws to use?

No. Hole spacing says nothing about thread size or screw length. Those come from the TV’s manual and the mount’s instructions, and combining an overly long screw with a shallow hole can damage the set before the bracket is even tight.

Sources

Scroll to Top