How to Use a Smoke Tube in a Traeger Pellet Grill? | Setup That Actually Works

A smoke tube adds extra wood smoke to a Traeger pellet grill: fill it with smoking pellets, light one end until a flame holds, blow it out, and set the tube on the grate away from food and grease.

Traeger’s own material calls the smoke tube an optional device you can set inside the grill to build more smoke flavor. That’s the whole idea — a perforated metal cylinder that smolders on its own while the pellet system handles heat. The step order matters more than the tube you buy, because a tube lit badly just smothers or flares.

What follows is the sequence that works on a running Traeger, the placement that keeps embers off your food, and the two things that turn a good cook into a grease fire.

How Does a Smoke Tube Fit Into a Traeger’s Normal Operation?

A smoke tube is a supplement, never a replacement. Traeger grills move all-natural wood cooking pellets from the hopper to the firepot, where they burn to make heat and smoke, while a fan pushes that smoke through the chamber and the controller holds the temperature. The tube sits on top of all that and adds a second, slower smoke source.

That means the grill runs first. Set your temperature, close the lid, and let the Traeger preheat for roughly 15 minutes per Traeger’s guidance. Light the tube once the grill is already at temperature, so the tube’s smoke starts moving through a hot chamber instead of a cold one.

What Is the Correct Step Order for Lighting and Placing a Smoke Tube?

Fill, light, let it catch, then snuff the flame. Getting the order right is what separates a steady trickle of smoke from a tube that goes out in ten minutes or dumps ash on your ribs.

  1. Set up outdoors. The grill needs a stable, noncombustible surface and open air. Traeger states plainly that pellet grills are outdoor-only, because burning wood pellets produces carbon monoxide.
  2. Fill the tube per its own instructions. Use food-grade smoking pellets and stop at the tube’s stated capacity. Overfilling packs the pellets so tight that air can’t move through them.
  3. Light one end. A long-reach lighter or a torch works. Keep your hands and sleeves clear of the flame.
  4. Let a visible flame hold for a few minutes. You want the pellets at that end genuinely burning, not just blackened. Traeger’s material doesn’t specify exact lighting times — those vary by tube design, so follow the tube maker’s numbers.
  5. Blow out the flame. Once the end is established, extinguish it and let the pellets smolder. That smolder is the smoke you came for.
  6. Lay the tube horizontally on the cooking grate, clear of the drip tray, grease, food, and the grill walls, and somewhere it can’t tip into the firepot.
  7. Close the lid and watch it. Check smoke, temperature, and any sign of overheating through the cook.

Expect the tube to run hot on the outside and to leave ash behind. It’s a small combustion device sitting in your cooking chamber, so treat it like one.

Where Should the Tube Go, and What Actually Goes Wrong?

Placement is the difference between added flavor and a ruined cook. Keep the tube off the drip tray and away from grease accumulation, because a second burning object sitting in pooled grease is how flare-ups start. Traeger recommends inspecting and clearing grease-related components and cleaning ash or grease once the grill has cooled.

Three failures cover most smoke-tube problems:

  • The tube keeps going out. Usually underlit pellets or an overfilled tube. Repack looser, relight, and give the flame more time before you snuff it.
  • Bitter, acrid flavor. Too much smoke. Run the tube for part of the cook rather than all of it, and don’t add a second tube hoping for more.
  • Temperature spikes or embers near food. Reposition the tube away from the food and the grease path, and never let it sit where it can drop hot pellets.

One hard rule: never put loose pellets, wood chips, or charcoal into the firepot or hopper to chase more smoke. Traeger warns that other fuels can void the warranty, jam the auger, and create a safety hazard. The tube stays a separate accessory — never inserted into the firepot, hopper, auger, grease drain, or exhaust path.

Does Every Traeger Model Behave the Same With a Tube?

No, and Traeger doesn’t claim otherwise. Traeger’s published material describes the smoke tube as an optional accessory for adding smoke flavor but doesn’t list an approved tube model, a burn-time spec, or a compatibility list for every grill. Your model’s owner’s manual and the tube maker’s instructions control.

Two practical notes. First, Traeger’s Super Smoke feature is a separate grill function — a smoke tube being useful doesn’t mean your model has Super Smoke, and having Super Smoke doesn’t make a tube pointless. Second, the Traeger still needs a GFCI-protected electrical supply to run, even though the tube itself has no power cord.

If you’re still deciding which cylinder to buy, this roundup of the best smoke tubes for Traeger grills covers the sizes and builds that fit common grate layouts.

How Do You Shut Down Safely After Using a Tube?

Run Traeger’s shutdown cycle — don’t just unplug the grill. The cycle burns off leftover pellets and supports safe operation next time. Let the tube and the grill cool completely before you move, cover, clean, or store anything, and dispose of the ash only once it’s cold.

Current Traeger guidance on smoke tubes is limited to describing them as an optional smoke-flavor accessory. Traeger’s Super Smoke guide is the closest official discussion of adding smoke beyond the standard burn.

Common Questions

Can I use wood chips in a smoke tube instead of pellets?

Only if the tube manufacturer approves it. Pellets are the standard fill because they pack and smolder predictably. Chips can burn too fast or clog the tube, and Traeger’s fuel warning about non-approved fuels applies to the grill’s hopper and firepot — so check your tube’s own instructions before substituting.

How long does a smoke tube actually burn?

It depends on the tube’s size, how full you pack it, and the pellet type. Traeger’s published material doesn’t specify a burn time, and tube makers vary widely. A roughly half-full tube typically gives you a shorter, milder smoke window than a full one, but treat any exact hour figure you see elsewhere with suspicion.

Will a smoke tube void my Traeger warranty?

Traeger doesn’t state that in its smoke-tube guidance, but it also doesn’t guarantee the tube is safe or effective in every model. The warranty risk Traeger does spell out is using non-approved fuel in the hopper or firepot. Read your model’s owner’s manual and any warranty limitations before adding accessories.

Sources

Scroll to Top