Tundra bumpers match by generation, not year or trim: 2000–2006, 2007–2013, 2014–2021, and 2022-and-newer are separate fitment groups.
A 2013 Tundra and a 2015 Tundra share a generation name and almost none of their front-end hardware, so the year on the title alone won’t tell you what bolts on. Toyota Tundra bumper sizing and fitment runs on four groups, and every part number, sensor bracket, and grille opening follows the group before it follows the year.
The table below is the short version. The rest of this page covers what stops a return shipment.
Toyota Tundra Bumper Sizing And Fitment: The Generation Map
Four groups cover every US-market Tundra: 2000–2006, 2007–2013, 2014–2021, and 2022-and-newer. A bumper crosses within its own group and stops at the edges.
The 2007–2013 second-generation trucks run on their own catalog:
The 2014 facelift kept the platform and replaced the bodywork. Front fascia, grille, headlamps, and mounting interfaces all changed, so a 2007–2013 front bumper is not a 2014–2021 part. The 2022 redesign moved the Tundra to a different platform and made it a separate category;
| Model Years | Fitment Group | Catalog Evidence |
|---|---|---|
| 2000–2006 | First generation | Listings stop at 2006; Base and SR5, V6 and V8 |
| 2007–2011 | Second generation, pre-refresh | Front bumper 52111-0C901; Base, Limited, SR5 |
| 2012–2013 | Second generation, pre-refresh | Same part number carried over; Platinum joins for 2013 |
| 2014–2021 | Second generation, facelift | Rear cover 52057-0C061; SR through TRD Pro and Trail |
| 2022–2026 | Third generation | Cover 53931-0C130; cameras and parking sensors vary by trim |
One wrinkle in the 2007–2021 span: some aftermarket rear bumpers advertise that whole range. That can be honest for a specific product, but the listing has to say so itself and name the cab and body style it covers. Cars.com’s Toyota Tundra research page tracks the year-by-year body and trim changes behind these groups.
What To Confirm Before You Order
A part number match is necessary and not sufficient. Bumper compatibility follows the body, fascia, mounting points, and equipment before it follows the engine.
- Model year and generation, not just the badge on the tailgate.
- Front or rear position, and whether brackets and trim come in the box.
- Cab style — Double Cab or CrewMax — plus bed length and wheelbase where brackets meet the body.
- Trim level: SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Nightshade, or Trail.
- Factory equipment: parking sensors, camera openings, fog lamps, tow hooks, license-plate lamps, wiring.
- Finish and design: OEM, chrome, painted, color-keyed, off-road, or heavy-duty.
Engine size settles almost nothing here. A 5.7-liter truck and a 4.6-liter truck built in the same month can wear the same bumper, while two trucks with identical engines and different cabs may not.
Weighing steel against an OEM cover? Our tested Tundra bumper roundup covers what each style does to sensor placement and clearance before you commit.
Will A Replacement Bumper Keep Your Sensors Working?
A replacement bumper keeps your sensors working only if it holds every radar unit, camera, and parking sensor at the factory position and angle. Plenty of 2022-and-newer Tundras carry front cameras and parking sensors that a flat steel face will block outright.
Bumpers sit inside the crash structure, so a swap can affect radar, cameras, parking sensors, pedestrian-protection components, airbag-related crash behavior, tow ratings, and lighting. Don’t drill, weld, relocate, or cover a sensor unless the manufacturer’s install instructions call for it.
After the install, verify sensor alignment, camera view, warning lights, adaptive cruise, parking assist, lighting, plate placement, and clearance from tires and suspension. A listing that says “fits Tundra” proves nothing by itself — it should name the years, generation, cab, position, trim limits, and included hardware. Check any catalog against your VIN and the full part number before the card comes out.
Common Questions
Do 2021 And 2022 Tundra Bumpers Interchange?
No. The 2022 model year started a new Tundra generation on a different platform, and its bumper mounting points and body structure differ from the 2007–2021 trucks. Dealer parts data lists separate bumper cover numbers for the two eras. A 2021 bumper will not bolt onto a 2022 truck without custom fabrication, and fabrication can interfere with front sensors and cameras.
Does A Bumper From A Different Trim Fit My Truck?
Sometimes. Within one generation and cab style, trim levels share the main mounting points, but bumper trim, sensor bezels, fog lamp openings, and tow hook cutouts vary. The listing must name the trims it covers. If your truck has parking sensors and the replacement bumper has no sensor cutouts, it is not a bolt-on part.
Can I Reuse My Factory Brackets With An Aftermarket Bumper?
Often, yes, when the replacement reuses the original mounting locations — most direct-fit OEM-style covers do. Off-road and heavy-duty bumpers usually ship with their own brackets and hardware, and those pieces are not interchangeable with factory parts. Confirm what the box includes before ordering, because missing brackets turn a weekend job into a second shipment.
Sources
- Cars.com. “Toyota Tundra Research, Pricing and Specs” Supports the model-year, generation, trim, and body-style groupings used throughout.