A wireless split keyboard pairs as one Bluetooth device: hold the Easy-Switch key three seconds, then select it in your computer’s Bluetooth list.
Most pairing failures are the same small mistake: a tap where a three-second hold was needed. The board never enters discoverable mode, the computer never lists it, and it looks like dead hardware. The order of operations matters more than the operating system—the same five moves work on macOS, Windows, and Linux; only the settings window changes.
Why Does A Split Keyboard Show Up As One Device?
The halves talk to each other, not to your computer, so the OS sees one Bluetooth entry, one battery reading, one keyboard. ZMK-firmware boards work the same at the system level, but profile controls live in the keymap instead of a physical key: Either design needs one thing first: a channel or profile the board will actually advertise on.
| Operating System | Bluetooth | USB Receiver |
|---|---|---|
| Windows 10 and 11 | Supported | Supported |
| macOS | 10.15 or later | 10.14 or later |
| Linux | Supported | Supported |
| ChromeOS | Supported | Supported |
| iPadOS 14 and later | Supported | Not listed |
| iOS 13.4 and later | Supported | Not listed |
| Android 8 and later | Supported | Not listed |
Pairing Over Bluetooth: The Step Order That Works
- Turn the keyboard on.
- Press the Easy-Switch key for the channel you want. Channels 1, 2, and 3 each hold one computer.
- Hold that key three seconds if the LED is not already flashing rapidly. That hold is what makes the board discoverable—and what people skip.
- Open Bluetooth settings. On macOS, System Preferences > Bluetooth (Ventura and later: System Settings > Bluetooth). On Windows, Start > Settings > Devices > Add Bluetooth device; on Windows 11, Settings > Bluetooth & devices > Add device.
- Select ERGO K860, or your board’s name.
Logitech’s ERGO K860 getting-started guide runs the same sequence, including the three-second hold. Repeat on channels 2 and 3 for a second and third computer, then switch with a short press—no settings needed. A channel holds one machine at a time, so handing the keyboard to someone else means pairing their computer on that channel and replacing the old entry.
Still choosing between models? Our tested wireless split keyboards roundup covers which boards pair without drama on macOS and Windows.
USB Receiver Setup And Mistakes That Break Pairing
A receiver skips Bluetooth: switch the keyboard on, plug the matching receiver into a USB port, and the board connects with no pairing screen. Matching is the whole game—business versions of the ERGO K860 use Logi Bolt, and a Logi Bolt receiver is not interchangeable with a Unifying receiver. On Unifying models, open the configuration software, choose Add devices > Setup Unifying device, and follow the prompts. Locked-down work laptops that block Bluetooth pairing are where the receiver earns its keep.
Three failures account for most of the rest:
- Wrong channel. Pairing on channel 1 then tapping channel 3 makes the keyboard look disconnected. Short-press back to the paired channel.
- Wrong receiver. A Unifying receiver will not talk to a Logi Bolt board, and the reverse is true too.
- Wrong system assumption. Bluetooth and receiver modes list different OS requirements, so check the row for your machine before promising a coworker it will work.
Common Questions
Why Doesn’t The Computer List The Keyboard At All?
The board is almost certainly on a channel that never entered discoverable mode. Press the Easy-Switch key once to see which channel is lit, then hold that same key three seconds and watch for a rapid flash. If the LED pulses slowly or stays solid, the computer keeps ignoring it.
Can You Pair One Board To A Work Laptop And A Home PC?
Locked-down work laptops sometimes block Bluetooth pairing entirely—that is where a Logi Bolt receiver earns its place.
Does A Split Keyboard Need Both Halves Plugged In?
No. On a wireless split board the halves link to each other, and only one carries the Bluetooth or receiver connection to your computer. The second half still needs its own charged battery, so budget for two cells and charge both before a long session.
Sources
- Logitech. “Getting Started – ERGO K860” Supplies the three-second Easy-Switch pairing sequence and the five-second LED confirmation.
- SplitKB. “Using Wireless – Halcyon Series” Documents Bluetooth profile behavior on ZMK-based split keyboards.
- SplitKB. “Batteries – Aurora Series Build Guide” Covers battery polarity and the fire risk of miswired or imbalanced charging.