How to Set Up a Bow Sling for Hunting? | Wrist Vs. Carry

A wrist sling loops around the riser and your hand to catch the bow after release; a shoulder sling carries the bow hands-free and comes off before you draw.

Set one up like the other and you get a bruised forearm or a dropped bow. A wrist sling stops the bow hitting the ground when your hand opens; a shoulder sling hauls it up a ridge.

How Do You Set Up A Wrist Sling On A Bow?

A wrist sling attaches around the riser between the grip and the stabilizer, then loops over the back of your hand so the bow hangs free after the shot. Most mount at the stabilizer bushing or a dedicated stud, so check your riser before buying hardware.

  1. Find the attachment point. Mount between grip and stabilizer, or use the stabilizer bushing if the design calls for it.
  2. Slide your hand into the loop and grip normally. Fingers should open fully without being forced apart.
  3. Test at full draw and through release. Shoot several arrows; the bow should drop only to the sling, never pull down hard or spin.
  4. Check clearance with hunting gear on. Shoot in gloves and jacket with your release. The sling must not press into the thumb web, snag the release, or touch cams, cables, or arrow.

When it’s right, the bow tips forward into the sling and settles at the same angle every shot.

Getting Fit And Tension Right

Over-tightening is the most common mistake and costs accuracy: a loop that forces your hand closed adds grip torque and throws off form. Too loose and the bow falls farther than expected, slamming into gear or the ground. Adjust in small increments and shoot between changes. The goal is a sling that catches the bow the instant your fingers relax, with no pull in your bow arm.

Sling Type What It Does Setup Priority
Wrist sling Catches the bow after release Loop length and attachment tension
Shoulder/back sling Carries the bow hands-free Bow angle and component clearance
Paracord wrist models Adjustable, field-repairable Knot tension test at full draw
Neoprene or webbing Padded, low-stretch No slip, no wrist pressure points
Riser-cover carry slings Protects cams, string, accessories Axle-to-axle fit check
Improvised slings Emergency only Test thoroughly before field use
Quick-fit models Adjusts to bow length Verify fit on your specific bow

How Do You Set Up A Shoulder Or Carry Sling?

A shoulder sling clips to the bow per the manufacturer’s instructions, passes over your shoulder, and rests the bow across your back at a controlled angle. It’s for transport, not shooting — remove or reposition it before you draw. Fit matters more than the strap: on a compound, confirm cams, cables, pulleys, quiver, and fletchings clear your body and don’t rub against pack or jacket as you walk. Snag hazards are real in dense brush, so keep the sling tight to the bow and know where it sits when you transition to a shot. Comparing options? The best sling for bow roundup from tested field use covers fit ranges and price points side by side.

What Are The Common Mistakes To Avoid?

  • Wrong sling for the job. A wrist sling won’t carry your bow up a mountain, and a shoulder sling wrecks your shot if it stays on during the draw.
  • Protecting only the riser. Cams, cables, string, quiver, and fletchings need clearance too, especially on compounds.
  • Improvised slings. A towel or strap can shift, slip, or tangle the string. Test hard before it sees the field.
  • Ignoring safety. Safe backstop, muzzle discipline, and full compliance with state and local hunting rules.

Common Questions

Should a wrist sling be tight or loose?

Snug enough that the bow drops only to the sling when your hand opens, loose enough that your fingers relax fully without being forced apart. Over-tight slings add grip torque and hurt accuracy; over-loose slings let the bow fall farther than expected and can strike gear or the ground. Adjust in small steps and shoot between each change.

Can you leave a shoulder sling on while shooting?

No. It’s a transport accessory only. Remove or move it clear before you draw, because the strap can catch on clothing or brush and interfere with your draw cycle. Keep it tight to the bow and know where it sits when you transition to a shot.

Will any bow sling fit a compound bow?

Not automatically. “Universal” labels are unreliable, so measure your bow’s axle-to-axle length and check the listed fit range before buying.

Sources

Scroll to Top