Wall-mounting a tablet takes eight steps: confirm the exact model and mount fit, pick a wall spot with power, mark the holes, install anchors rated for the load, attach the backplate, seat the tablet, connect charging, and test stability and cable clearance.
For the full breakdown, see our best Wall Mountable Tablet guide.
A tablet that slips out of a cheap holder lands screen-first on tile. The difference between that and a rock-solid install is almost never the mount itself — it’s confirming your exact model, generation, and whether a case stays on, because compatibility is model-specific and screen size alone tells you nothing.
Here is the full sequence, the mount types worth knowing, and the failure points that catch first-timers.
Mount Types And What Each One Costs
Three formats cover nearly every job: an enclosure for theft resistance, a VESA bracket for standardized mounting, and an adhesive system only where the manufacturer permits it.
| Mount Type | What It Fits | Listed Price |
|---|---|---|
| Anti-theft full-motion mount | iPads 10.2–11 in; tilt, swivel, 2.2 lb max load | $99.99 |
| Universal wall mount (Core Reach) | Most USB-C tablets 8–13 in | $120.00 |
| iPad wall mount (Link) | iPad 7th–10th gen, 10.2–10.9 in | $150.00 |
| Original wallmount | Portrait or landscape; mount height 120 cm | $199.00 |
| Universal adjustable bracket | Most tablets 9.7–13 in; 75 × 75 mm VESA; 30 lb rated | About $21 |
The anti-theft mount supports VESA 75 × 75 and 100 × 100, +5°/−12° tilt, ±90° swivel, and 2.9–11.2 inches of extension. The Core Reach model wants a flat rear surface and a USB-C port centered on the short edge, and it ships with a 180-degree USB-C cable.
The Step Order That Works
- Identify the tablet precisely. Write down the model, generation, screen size, thickness, weight, port location, camera position, and whether a case stays installed.
- Choose the format. Enclosure for theft resistance, VESA bracket for standardized mounting, adhesive only if the tablet has the required flat rear surface and the mount maker allows it.
- Pick the wall location. Check viewing height, reachability, glare, cable path, nearby power, and whether the wall supports the load. Avoid drilling where wiring or plumbing may run.
- Mark the mounting points. Use the supplied template. Heckler’s H755BG installation guide walks through reviewing the backplate slot pattern, choosing the location, and marking the holes.
- Install rated fasteners. Use studs, a suitable junction box, or anchors rated for your wall material and the mount load. Never assume the included screws suit drywall, masonry, and studs alike.
- Attach the backplate. The H755 sequence removes the tablet enclosure first, mounts the backplate to the wall or a double-gang box, and fits a PoE adapter inside the box where applicable.
- Install the tablet. Loosen the tablet brackets, seat the iPad, connect USB-C, tighten the bracket screws, hang the enclosure, then tighten the set screws. The official Heckler guide details each of these moves.
- Connect and test. Confirm the cable is not bent sharply, pinched, or under tension. Charge the tablet while stationary, and on articulating mounts, across the full range of motion.
You’ll know the job is right when the tablet stays put with a firm press on the corner, the touchscreen and cameras still work, the vents are clear, and rotating portrait to landscape doesn’t tug the cable.
Where Installations Go Wrong
Most failures come from fit and wall material, not technique. Cases, folios, grips, and rear attachments can block enclosure fit or weaken an adhesive bond — decide early whether yours stays on. Tablets with Lightning, Micro-USB, or off-center ports may need a different mount or cable setup, since the products above target iPads and USB-C tablets such as Samsung Galaxy Tab devices. They don’t promise universal fit for every Android, Windows, or Amazon tablet. Take the time to check your H755BG installation guide against your hardware before drilling, because anchor choice and load rating are where a light tablet still pulls out of drywall.
One more note: the Original wallmount’s maker recommends a mounting height of 120 cm and does not include wall plugs, so plan a hardware-store run if your wall needs them.
Common Questions
Can I mount a tablet without drilling holes?
Sometimes. Adhesive mounts work only if the tablet has the required flat rear surface and the manufacturer permits that use. A case, grip, or textured back usually rules it out. For anything that stays up long-term or sits above a hard floor, anchored fasteners are the more reliable choice.
Do I need a VESA bracket for my tablet?
Only if your mount uses a VESA pattern. The anti-theft mount covers 75 × 75 mm and 100 × 100 mm, and the budget adjustable bracket uses 75 × 75 mm. Enclosure-style mounts like the iPad Link and Original wallmount don’t rely on VESA at all — they hold the tablet itself.
What if my tablet has a Lightning or Micro-USB port?
Plan for a different mount or cable configuration. The products in this guide target iPads and USB-C tablets, and off-center or older ports can foul the cable channel. Measure your port location before ordering, and pick a mount whose charging cutout lines up with it.
Sources
- Heckler. “H755BG Installation Guide” Details the backplate, enclosure, and set-screw installation sequence.
- Mount-It. “Anti-Theft Tablet Wall Mount with Swing Arm” Source for iPad compatibility list, VESA patterns, tilt, swivel, and load limit.
- Bouncepad. “Universal Tablet Wall Mount” Source for Core Reach, Link, and Original wallmount specs and pricing.