Measuring for a winter cover means taking the trampoline’s outside frame edge to outside frame edge through the center — not the jumping mat — then matching that number and the trampoline’s shape to the cover maker’s fit chart.
Where Exactly Do You Put The Tape Measure?
Measure the assembled frame from one outside edge straight across the center to the opposite outside edge, ignoring ladders, enclosure poles, and basketball hoops. Covers hook to the mat perimeter near the springs, so the frame rail and spring line are what the cover must span.
- Round trampolines: take two or three readings through the center at different angles and use the larger consistent figure. Frames settle and assemble slightly off-round.
- Oval, rectangular, and square trampolines: record maximum outside length and maximum outside width, frame included.
- In-ground vs. above-ground: confirm which type the cover is built for. In-ground models often use a different attachment perimeter, and an above-ground cover will not convert.
Write down the shape, brand, model name, and serial number. Proprietary covers frequently fit only named models or a specific model generation.
Trampoline Cover Sizing: Why The Box Size Misleads
A “12-ft trampoline” does not measure 12 feet at the frame. ACON’s official product page makes this plain by listing actual outer cover dimensions rather than restating the nominal size.
| Nominal Trampoline | Listed Outer Cover Size | Notes |
|---|---|---|
| 6 ft round | 4 ft diameter | Large gap between label and cover |
| 10 ft round | 7 ft 11.3 in | Roughly two feet under nominal |
| 12 ft round | 9 ft 8.1 in | Common mislabeled size |
| 14 ft round | 11 ft 8.2 in | Verify before ordering |
| 15 ft round | 12 ft 8.4 in | Largest round listing |
| 13 Sport HD rectangular | Model-specific | Sold by model, not diameter |
| 16 Sport HD rectangular | Model-specific | Sold by model, not diameter |
Use the manufacturer’s fit dimensions, not a guessed allowance.
How Do You Match Measurements To A Cover?
Take your frame numbers and the trampoline’s shape to the cover maker’s compatibility chart, and let the chart overrule your tape measure when the two disagree. ACON lists covers by model for its 6 ft, 10 ft, 12 ft, 14 ft, and 15 ft round trampolines plus the 13 Sport HD and 16 Sport HD rectangular models.
North Trampoline follows the same model-first logic on its US product page, naming an Explorer/Legend Round 14-ft trampoline and an Explorer/Legend Oval 16 ft × 11 ft trampoline as supported fits. If your frame measures close to a listed size but your model name doesn’t appear, ask the maker — a near-match on a proprietary system is a coin flip.
Once the size is settled, the decision is mostly materials and attachment hardware, and a tested roundup of winter trampoline covers shortens that step. Prices shift by seller and date.
How Do You Install The Cover So Wind Doesn’t Take It?
Spread the cover flat and hook every stainless-steel attachment to the outside of the mat near the spring line — skipping hooks is how covers end up in a neighbor’s yard. ACON’s guidance allows one person to install a cover, though a second set of hands helps on larger sizes.
Clear the trampoline first: no jumpers, toys, ladder, or loose accessories. A winter cover is a debris and weather barrier, not a safety surface. Knock heavy snow and water off with a soft-bristled brush or broom and re-check the hooks after a storm.
The costly mistakes: measuring the mat instead of the frame, measuring enclosure poles or leg span, forcing a round cover onto an oval or rectangular frame, trusting the nominal size, skipping the above-ground versus in-ground question, and mistaking a shade canopy for a waterproof winter cover.
Common Questions
Can I use the jumping mat size instead of the frame size?
No. The jumping mat sits inside the springs, so its diameter runs smaller than the frame the cover must clear. Measuring the mat produces an undersized cover. Always measure outside frame edge to outside frame edge through the center.
What if my trampoline measures between two listed cover sizes?
Contact the manufacturer with your shape, model, and serial number before ordering. Proprietary systems fit by model generation, not by nearest inch, so a size in between two listings is a signal to ask rather than round up.
Do I need a different cover for an in-ground trampoline?
Yes. In-ground trampolines typically need a cover built for that installation, since the attachment perimeter and method differ from an above-ground model. An above-ground cover will not adapt to an in-ground frame.
Sources
- ACON. “ACON Weather Cover” Source for listed outer cover dimensions by model size, stainless-steel hook installation guidance, and the $89 listing price.
- North Trampoline. “Weather Cover” Source for supported Explorer/Legend round and oval fits and the from-$205 listing price.