Measure both bare feet while standing late in the day, then size your sandals to the larger foot’s length and width against that model’s own chart.
Sandal sizing goes wrong at the very first step: most people reach for a remembered shoe size instead of a fresh measurement. Feet change with age, weight, pregnancy, and surgery, and brands assign different foot lengths to the same nominal size. Twenty minutes on a hard floor with paper and a marker gets you a number you can trust — and a sandal that fits on arrival.
What You Need Before You Start Measuring
Two sheets of blank paper, a marker, a ruler or measuring tape, and a hard floor with a wall you can stand against. Nothing else, and no help required.
Skip thick-bordered paper — the border can throw off where your heel line lands. A flat, hard surface matters more than a fancy tool: soft carpet lets your weight sink in and distorts the outline. Run this in the evening or after a normal day of standing and walking, because feet swell and are generally at their largest by day’s end.
If you plan to wear socks with the sandals, or use orthotics, measure with them in place. A bunion, hammertoe, or general swelling changes the picture too, so account for it now rather than after the sandals arrive.
How Do You Measure Foot Length and Width at Home?
Tape the paper to the floor with one edge against the wall, stand with your heel touching that wall and your weight spread evenly, then mark the longest toe and measure heel to mark. Repeat for width across the broadest part of the foot.
The step order matters more than the tools:
- Place the paper on the hard floor so one edge sits flush against the wall.
- Stand on it with the heel touching the wall. Keep your weight even — don’t lean onto the other foot.
- Mark the tip of your longest toe. Not the big toe by default; whichever toe actually reaches furthest.
- Measure from the heel edge to that mark. This is your length.
- Mark and measure across the widest part of the forefoot. This is your width.
Do the whole sequence again for the other foot. Feet are rarely identical, and every at-home instruction set says the same thing: fit the larger foot, not the smaller one. Record both numbers in whatever units the brand’s chart uses — inches, centimeters, or millimeters — and leave them in that unit instead of converting to a US size on your own.
The REI footwear fit guidance makes the standing requirement explicit and puts width alongside length for a reason: length alone won’t tell you if a sandal will squeeze across the forefoot. You should see two clean outlines with no heel gap and an even weight line when you finish.
Reading a Sandal Size Chart the Right Way
Match your measured length to the chart for that exact sandal model, not to a generic US conversion table. Different brands — and often different models within one brand — assign different foot lengths to the same nominal size.
Chart conventions differ, and the difference can cost you a return. Arc’teryx’s sizing guidance for the Aerios FL tells shoppers to measure heel to longest toe and pick the closest listed measurement equal to or greater than the foot length — the chart runs slightly generous. QUOC’s Escape Road Cycling Shoes listing takes the opposite approach: measure both feet, take the longest, add 5 mm (about 0.2 inches), and compare that total to the chart. Both are model-specific. Neither generalizes to sandals as a category, which is exactly why the exact product page beats a remembered size every time.
Open-toe sandals add a wrinkle: if the manufacturer defines footbed length directly, don’t mentally bolt on running-shoe toe room. A closed-toe or athletic sandal usually wants roughly a thumb’s width between your longest toe and the front, with the midfoot and heel held snug. An open sandal should let the whole foot sit on the footbed with no toes or heel hanging over the edge. Check the brand’s return policy before you commit.
| Step | What to Do | Why It Matters |
|---|---|---|
| Time of day | Measure at day’s end | Feet swell and are largest late |
| Stance | Stand, heel to wall, weight even | Seated measuring undersells length |
| Feet counted | Both, use the larger | Left and right rarely match |
| Length endpoint | The longest toe | The big toe isn’t always longest |
| Width | Across the widest forefoot | Length alone misses squeeze |
| Chart source | The exact model’s chart | Same size, different real lengths |
| Chart rule | Follow that chart’s rounding or add-on | Brands differ on what “size” means |
Mistakes That Wreck the Measurement
Measuring while seated is the most common error. A standing measurement captures your foot under body weight, and seated numbers come out short — a sandal sized from them tends to pinch.
A few more that quietly ruin the result:
- Using only one foot, or hedging toward the smaller one.
- Measuring in the morning before normal swelling sets in.
- Stopping at the big toe when a neighboring toe is longer.
- Working on carpet or a tilted ruler, which skews the outline.
- Trusting a remembered size from another brand or an old pair.
- Ignoring the socks, orthotics, or foot conditions the sandal has to accommodate.
If a bunion, hammertoe, or persistent swelling is in play, tell a fitter — those change which sandal design works, not just the size number. Once you have a real length and width in hand, browsing by your true size pays off; our roundup of tested womens size 12 sandals is a useful next stop if you already know you sit at that end of the chart. For the standing-measurement method itself, REI’s footwear size finder walks through the paper-and-wall approach step by step.
Two numbers, measured standing, at the end of the day, matched to one model’s chart. That’s the whole method — and it’s the difference between a sandal you wear all summer and one that sits in the closet.
Common Questions
Should I measure my feet in the morning or at night?
Measure late in the day, after you’ve been standing and walking normally. Feet swell with activity and gravity, so your evening measurement is generally your largest — the number you want to size a sandal against. A morning measurement can leave you with a fit that pinches by afternoon.
What if my two feet measure differently?
Always size to the larger foot. Nearly everyone has some asymmetry between left and right, and sizing to the smaller foot risks a sandal that squeezes or crowds the longer one. Measure both, record both, and use the bigger set of numbers for length and width when you check the chart.
Do I need toe room in open-toe sandals?
Not the same way a running shoe does. If the manufacturer’s chart defines footbed length directly, compare your measured foot to that figure rather than adding a thumb’s width. The sandals should still hold your whole foot on the footbed with no toes or heel spilling over the edge, so check the product page and return policy.
Sources
- REI. “Footwear Size Finder.” Standing measurement method, larger-foot fitting, and width guidance.