Factory Silverado side steps bolt to body mounting points that already exist on the truck, using supplied brackets and no drill.
For the full breakdown, see our best Silverado Side Steps guide.
A mismatched part number turns an easy afternoon bolt-on into a return shipment, which is why knowing how to install side steps on a Chevy Silverado starts at the fitment chart and not at the socket set. Get the part right and the rest is a matched pair of boards, a handful of fasteners, and an hour on your back in the driveway.
Does Every Silverado Use The Same Side Steps?
No. Chevrolet lists separate part numbers for Crew Cab, Double Cab, Regular Cab, and Cab & Chassis builds, and a 1500 truck does not share fitment with a 2500 HD or 3500 HD. Matching by width or appearance gets you a box that will not bolt up.
Check five things against the official fitment table before you buy: model year, 1500 versus 2500 HD versus 3500 HD, cab style, bed length, and body configuration. These are current Chevrolet Accessories listings, and they show how narrow each fitment really is.
| GM Part Number | Fits | List Price |
|---|---|---|
| 86574696 | Silverado 1500 Crew Cab, 2019–2027 | $850.00 |
| 84742431 | Silverado 1500 Extended Cab, 2019–2026; 2500 HD and 3500 HD Extended Cab, 2020–2026 | $1,095.00 |
| 86574792 | Silverado 1500 Crew Cab, 2019–2026 | $950.00 |
| 86574743 | 2500 HD and 3500 HD Crew Cab, 2020–2026 | $850.00 |
| 85522564 | 2500 HD and 3500 HD Crew Cab and Cab & Chassis, 2021–2026 | $785.00 |
| 86574760 | 2500 HD and 3500 HD Extended Cab, 2020–2026 | $850.00 |
| 84106506 | Silverado 1500 Extended Cab, 2016–2018 | $650.00 |
| 22805433 | Silverado 1500 Standard Cab, 2016–2018 | $500.00 |
Those prices leave out installation, taxes, and other fees, and dealers set their own. If you want to weigh factory boards against aftermarket bars before committing, our tested roundup of Silverado side steps lays the differences out side by side.
Installing Side Steps On A Silverado: Hand-Tight First, Then Torque
Factory-style boards hang on pre-attached brackets at designated mounting points, and everything gets threaded by hand, aligned, then tightened — in that order, every time. Chevrolet’s listing for the 6-inch rectangular running boards confirms it: body-mounted boards, factory mounting points, hardware included, no special tools.
- Match the part number to your truck’s year, cab, bed, and body style before the hardware bag comes open.
- Lay out both steps, the brackets, the fasteners, and the instruction sheet. These ship as a matched driver-and-passenger pair.
- Find the factory mounting points under the rocker panel on the driver side. They are the reinforced or threaded spots the bracket contours were shaped for.
- Hang each bracket at its designated point and thread every supplied fastener by hand. Nothing gets fully tightened yet.
- Center the step against the doors and rocker panel, then torque the hardware to the figure on your product’s instruction sheet. Chevrolet publishes no universal torque spec, so the sheet in the box is the authority.
- Repeat on the passenger side, then load each step with your full weight. A correct install sits flush, carries weight evenly, and stays silent.
When The Mounting Points Refuse To Cooperate
Stop and hand the truck to a dealer when factory fasteners are damaged, the mounting points are blocked by aftermarket armor or lift components, or the rocker panels have been modified. Chevrolet recommends dealer installation for its running board line, and those are the conditions that make the recommendation worth taking.
Do not drill extra holes and do not substitute hardware, even if a bracket looks like it should fit. Some of these steps mount to the rocker panel rather than the frame, and a hole in the wrong place becomes a corrosion problem you will chase for years.
After the install, check bracket seating, fastener tightness, and the step’s traction surface on a regular schedule. A step that has worked loose is a fall hazard, and a misaligned bracket grinds against the rocker panel long before you notice it.
Common Questions
Do Chevy Silverado side steps need drilling?
No. The factory-style assist steps Chevrolet sells mount to existing body attachment points under the rocker panels, and the brackets are shaped to those spots. Drilling is not part of the procedure, and adding holes yourself can break the corrosion protection on the rocker panel. If the mounting points will not line up, the part number is wrong, not the truck.
Can You Install A Set In A Driveway Without A Lift?
Yes. The boards sit low enough to reach with the truck on level ground, and a socket set plus a torque wrench covers the whole job. Ramps or a lift make it easier on your back, not possible. Chock the wheels and work on flat, hard pavement, because a truck that shifts while you are under the rocker panel is the danger.
Why Do Some Silverado Assist Step Part Numbers Cost So Much More?
The expensive listings are usually GM Genuine Parts replacements rather than accessory pairs. Accessory pairs, which include both sides, usually land between $500 and $1,095.
Sources
- Chevrolet Accessories. “Silverado and Sierra Crew Cab 6-Inch Rectangular Running Boards in Black, Part 86574696” Confirms body-mounted design, factory mounting points, included hardware, and the $850 MSRP.
- Chevrolet Accessories. “Double Cab Sport Step Assist Steps in Black with Silverado Script, Part 84742431” Source for Double Cab fitment years and the $1,095 MSRP.
- Chevrolet Accessories. “Crew Cab 6-Inch Rectangular Assist Steps in Chrome, Part 86574743” Source for 2500 HD and 3500 HD Crew Cab fitment and the $850 MSRP.