How to Identify Your Rain Bird Sprinkler Model and Find Compatible Parts | Read The Cap Code

Rain Bird sprinkler models are stamped on the cap or body; record the series number and every suffix, then match that code to the parts listing.

A head that sprays the wrong arc wastes water on every cycle, and the gap between the part you need and the one that looks identical is often four letters.

Everything you need sits in the molded code on the cap. Once you know how to identify your Rain Bird sprinkler model and find compatible parts, a replacement turns into a two-minute look-up instead of a second trip to the store.

Identifying Your Rain Bird Sprinkler Model: Read Every Suffix

The series and model number are molded or printed on the cap, body, nozzle, rotor, or valve, so read that stamping before you reach for a wrench. Suffixes carry as much weight as the number: PRS means pressure regulated, SAM marks a check valve that stops low heads from draining the zone, PC and FC mean part-circle and full-circle, and NP flags a non-potable unit.

Work through these in order:

  1. Shut off water to the zone and cut power at the controller before removing a head, nozzle, solenoid, or valve part.
  2. Wipe soil and mineral crust off the cap with a damp rag, then photograph every marking. Codes that read fine in daylight vanish under a thumb.
  3. Write down each character: series name, numerical model, suffixes such as PRS, SAM, PC, FC, and NP, plus any nozzle code.
  4. Measure pop-up height, body diameter, and inlet thread size with a tape. Spray radius tells you nothing about the body you are replacing.
  5. Name the device type — spray head, rotary nozzle, rotor, impact sprinkler, bubbler, drip component, valve, or controller.

On 1800 Series spray heads the number tracks the pop-up: 1802 is a 2-inch body, 1803 a 3-inch, 1812 a 12-inch.

Match The Code To Rain Bird’s Current Listings

Rain Bird’s own store and dated price lists are the authority, not the shelf tag, and each listing states whether a code buys a complete sprinkler, a bare body, a nozzle, a cartridge, a diaphragm, a bearing assembly, or a repair kit. Prices carry an effective date on the cover because they move: Rain Bird states that its prices are FOB shipping point and subject to change without notice.

Compare your code against the matching series in Rain Bird’s 2025 landscape irrigation price list, then check the live store page for today’s retail figure.

Rain Bird Model What The Code Covers Published Price
1802PRS 2-inch pop-up spray head, pressure regulated $7.49
1803APPRS 3-inch pop-up spray head, pressure regulated $8.49
1812APPRS 12-inch pop-up spray head, pressure regulated $20.49
US400 4-inch UNI-Spray body only, no nozzle $2.53
US410 4-inch body with 10-foot VAN nozzle $5.47
5004+FCSR 4-inch rotor, full-circle, PRS, check valve $29.49
8005 5-inch part/full-circle rotor $130.00
1100444 4-inch ACME rotor with No. 44 nozzle $235.13

The spread is wide — a bare UNI-Spray body at $2.53, an 11000 Series rotor at $235.13 — so buy the assembly the listing names, not the assembly the photo suggests.

What Decides Whether A Replacement Actually Fits?

Seven things have to line up: series, connection size, pop-up height, arc, nozzle family, inlet type, and pressure regulation. A part matching only the height will either fail to thread on or spray a different pattern at a different flow.

The misses that cost people a return:

  • Body versus complete unit. US400 ships as a body with no nozzle; US410 includes a 10-foot VAN nozzle.
  • Nozzle family. Nozzles are not interchangeable across the 1800, UNI-Spray, rotary-nozzle, 32SA, 3500, and 5000 families.
  • Potable versus non-potable. Rain Bird sells separate non-potable versions such as RD04SP30FN and 8000-series models, and those codes are not substitutes on a drinking-water line.
  • Ignoring stated fitment. A Rain Bird bearing assembly fits 70CH, 70CHM, and 70C brass impacts; a diaphragm kit fits all DV, DVF, and ASVF valves.

If comparing assembled options beats hunting part numbers, our tested Rain Bird sprinkler parts roundup lines up heads and repair kits side by side.

Three checks before checkout: the code matches character for character, the listing says body or complete, and the price is today’s price from Rain Bird’s store rather than a figure from an older PDF.

Common Questions

Where Do I Find The Model Number On A Buried Head?

Raise the riser by hand, or run the zone for a few seconds and read the cap while it is extended. Codes usually face sideways, so a close-range phone photo beats leaning in. Dry the markings and cycle the zone off before you unscrew anything, since water pressure on a loosened head is how threads get stripped.

Can I Replace Just The Nozzle And Keep The Body?

Yes, when the body is undamaged and the filter screen is clean. Rain Bird sells nozzles separately, and some bodies ship without one — the US400 is a 4-inch body only. Match the nozzle family and radius to the original code, because a nozzle from another family will not thread on or spray the same pattern.

Why Do Heads With The Same Pop-Up Height Cost Different Amounts?

Pressure regulation and check valves drive most of the gap. A 5004+FCSR rotor at $29.49 also carries a check valve that a plain rotor does without.

Sources

Scroll to Top