Match the part to the data plate: full model suffix, complete serial number, and truck configuration, then confirm with an authorized Yale dealer.
A hose that threads on perfectly can still be the wrong hose. Fit says nothing about pressure rating, voltage, or revision, and the part that looks identical to the one you just removed may be built for a different serial range.
Three fields on the data plate decide how to identify the correct Yale forklift part number: the full model string, the complete serial number, and the truck’s configuration. Order from a model family name alone and you are guessing with money.
What follows is the order that survives a trip to the parts counter — and the spots where lookups usually fall apart.
Yale Forklift Part Numbers: What The Data Plate Settles
A Yale part number is fixed by the truck’s identity, not the component’s appearance. The model designation narrows the catalog; the serial number and configuration narrow it to the one number that fits your machine.
Start at the data plate, the tag riveted to the frame — often under the hood or beside the operator’s seat. Photograph it before you loosen anything, then copy these fields as written:
- Model designation, suffix included. Dropping a BF, EF, or DF turns a real model into a guess, because those suffixes mark separate trucks rather than trim levels.
- Full serial number. Copy every letter and the trailing suffix; Yale’s own listings show strings such as D875V05226P and C910V04050P tied to specific trucks.
- Rated capacity in pounds. One designation can span a wide band — the GP190-280DF runs from 19,000 to 28,000 lb — and high-capacity trucks do not share every component with standard ones.
- Configuration: mast type and lift height, carriage and fork dimensions, tire type, fuel or battery system, transmission, and any attachment.
| Data Plate Field | What To Copy | Why The Part Changes |
|---|---|---|
| Model designation | Full string, suffix included | Sets the series, not one part |
| Serial number | Every letter, digit, and trailing suffix | Pins the production range |
| Rated capacity | Exact figure in pounds | Separates standard from high-capacity parts |
| Mast and lift height | Type and rated height | Drives hydraulic and structural parts |
| Fuel or battery system | LP, diesel, or battery voltage | Governs electrical and fuel parts |
| Carriage, forks, tires | Dimensions and tire type | Determines wheel and fork-mounted parts |
| Attachments | Make and model of the unit | Changes seals, hoses, and brackets |
Yale’s own listings make the naming problem plain: the order-picker model lineup shows FS030BF, OS030BF, OS030EF, and SS030BF grouped on one page as four separate trucks, not one family with options.
The number on the old part is a cross-check, never the answer. Illegible, superseded, aftermarket, and reused labels are all common, so confirm what is stamped on the component against Yale records before ordering.
Why Does A Part That Fits Still Turn Out Wrong?
Bolt pattern and shape are the least specific things about a component. Left and right versions, standard and high-capacity versions, and parts built for an earlier serial range can match a photo exactly and still be rated differently.
Four mismatches account for most bad orders:
- Left and right versions that mirror but never swap.
- A serial-number break mid-production, where the same truck name carries a revised component.
- Aftermarket numbers copied without a genuine Yale cross-reference.
- Third-party attachments that change seals, hoses, and brackets.
A used-truck listing is a sales description, not a parts specification. Price and photos on a resale page say nothing about what fits your serial range.
Confirming The Number Before You Install
Confirm the number through Yale’s parts channel or an authorized Yale dealer before money changes hands. Hand over the model, serial number, configuration, old part number, and a photo of the data plate, then ask for the current number and anything it supersedes.
Two questions do the most work. Does the quoted number cover this truck’s serial range and configuration? And does the swap need a kit, hardware, seals, or software programming along with it?
Matching the physical details comes last and matters most on anything that steers, brakes, lifts, or holds a load — connector style, voltage, pressure rating, mounting pattern, material, and revision all have to line up. A different rating is not a fit.
Parts that affect steering, braking, or control electronics belong to qualified technicians working from the applicable Yale service documentation. Never install a component with a different voltage, pressure rating, or connector because it happens to slip into place.
If you are weighing replacement options before you call, our tested Yale forklift parts roundup covers what other owners run on common models, so your questions get sharper.
Run the sequence in order — plate photographed, full model and serial written down, configuration noted, old number treated as a cross-check, final number confirmed against your serial range. Skip a step and you are ordering a guess.
Common Questions
Can I Order By The Number Stamped On The Old Part?
Treat it as a cross-check, not an order code. Stamped numbers fade, get replaced by later revisions, and aftermarket parts often carry something similar that crosses to nothing. Read it, photograph it, and give it to the dealer alongside your model and serial number so the current Yale number can be confirmed in their system.
Is The Serial Number Really Necessary For A Small Part?
Yes, even for a filter or a belt. Consumables change across production runs, and the serial number is what pins your truck to the right revision. Without it, the dealer is matching on model name alone, which is how buyers end up with a filter that does not seal or a belt sized for a different pulley set.
What If Yale Superseded My Part Number?
Expect it. Manufacturers revise numbers as suppliers and designs change, so the replacement may arrive under a number that does not match your old part. Ask the dealer to state the current number and the number it replaces, and confirm the new one covers your serial range before it ships.
Sources
- Yale Materials Handling. “FS030BF, OS030BF, OS030EF, SS030BF Order Pickers” Shows closely related models listed as separate trucks, supporting the exact-suffix rule.
- Yale Materials Handling. “GP190-280DF Forklift” Source for the 19,000 to 28,000 lb capacity range and the sample serial number formats.