How to Find the Right Troy-Bilt Snow Blower Parts by Model Number? | Match Before You Buy

Your snow blower’s 11-character model number, read from the Product Identification Label behind the wheels or on the right frame side, is the only key that unlocks correct Troy-Bilt replacement parts.

A belt that looks identical on two machines can carry two different part numbers, and the machine sitting in your garage is the one detail the catalog can’t guess. Grab the model number before you open a single parts page — it turns a guessing game into an exact match.

Here’s where to read it, how the Part Finder works, and what to check before you pay.

Where Is the Model Number on a Troy-Bilt Snow Blower?

The label sits in two different places depending on machine type. On two- and three-stage snow blowers, look at the rear of the frame cover between the wheels. On single-stage models, check the right side of the frame.

  • Read every character, hyphens included. A dropped digit sends you to the wrong diagram.
  • Never substitute the serial number, engine model, or manufacturing code. Each identifies something different.
  • Wipe the label clean first. Snow-blower labels collect oil, grit, and grime that swallow thin characters.
  • Photograph it. One phone shot saves a second crawl behind the machine later.

Support may ask for photos or measurements to pin down older production series.

How Do You Look Up Parts With the Model Number?

Enter the full model number in Troy-Bilt’s online Part Finder on the snow-blower parts page, or open the matching model page directly. From there, select Parts, Manuals, or Diagrams.

The workflow that avoids returns:

  1. Type all 11 characters into the Part Finder.
  2. Open the exact model result — not a similar one.
  3. Choose the assembly you need: belts, auger components, cables, engine parts, hardware, tires, or wheels.
  4. Cross-check the item number against the model-specific parts list, the exploded diagram, and the owner’s manual.
  5. Compare part number, dimensions, side or orientation, and assembly description with the failed part before ordering.
  6. Save both the model number and the new part number for next time.

Every model page carries its own documentation. Model 31AH9P77563, a two-stage unit listed as “SNOWTHROWER:2STG 13.0HP45 POWE,” publishes manual form numbers 769-03253, 751T181127514, and 181-1170-14 alongside its parts diagrams. Model 31AE6S73063 (“SNOWTHROWER:2STG 8.5HP26 STD W”) lists 161 parts plus owner-manual form 769-00394B.

What Do Common Troy-Bilt Snow Blower Parts Cost?

Troy-Bilt lists prices as “From” MSRP, so your location can shift the figure and the numbers change over time. The figures below reflect current listings.

Part Part Number Listed From
Auger belt 954-04050A $26.39
Auger-engagement cable 946-04230B $23.68
Drive belt 954-04260 $24.99
Spark plug F6RTC 951-10292A $5.99
Recoil starter assembly 951-14151 $83.05
Carburetor 951-14026A $106.35
Electric starter motor 951-10645A $293.80

If you’d rather compare aftermarket belts, cables, and wear parts side by side before committing, this roundup of tested Troy-Bilt snow blower parts lays out the options.

Why Doesn’t a Similar-Looking Part Fit?

Two 26-inch two-stage machines can take different auger belts.

Troy-Bilt’s catalog adds another wrinkle: it stocks parts for Troy-Bilt alongside Yard Machines, Craftsman, Yard-Man, Remington, and Bolens. Brand and appearance alone identify nothing. An old part number is also unreliable on its own, because Troy-Bilt revises components between production runs — the model-specific diagram is what settles it.

One working example: the current 3X 26-inch three-stage model 31AH5DVA710 lists auger-engagement cable 946-04230B, auger belt 954-04195A, speed-selector cable 946-04396A, and drive belt 954-04201A.

Ready to work through the official catalog? Start with Troy-Bilt’s snow blower replacement parts page, and keep the identification guide open for the label locations.

Common Questions

Can I use the serial number instead of the model number?

No. The serial number tracks your individual machine’s production history, while the model number identifies the design and its parts list. Troy-Bilt’s parts lookup requires the 11-character model number.

Does the engine brand matter when ordering parts?

It matters for engine-specific components, not for the machine as a whole. Troy-Bilt’s model pages list separate engine-manual form numbers — model 31AE6S73063 carries engine manual 181-639-14 — so check both the machine diagram and the engine documentation when the failed part sits on the motor.

What if the Part Finder rejects my model number?

Recheck the 11 characters for a dropped digit or hyphen first. If the entry still fails, the machine may be an older production series the online catalog no longer surfaces. Call Troy-Bilt Technical Support at 1-800-828-5500 with the label in hand; representatives can identify legacy models and supply the correct diagrams.

Sources

Scroll to Top