How to Choose a Tractor Stump Grinder: PTO vs 3-Point Hitch Sizing?

Tractor stump grinder sizing runs on PTO horsepower, PTO speed, hitch category, lift capacity, and hydraulic supply — not engine horsepower.

One bad pairing turns a stump grinder into a smoking gearbox and a tractor that won’t steer with the load hanging off the back. Five numbers on the tractor’s spec sheet settle how to choose a tractor stump grinder: PTO vs 3-point hitch sizing — and none of them is the engine badge on the hood.

The PTO spins the cutting wheel. The three-point hitch carries the weight and aims the cut. Both halves have to match, and the implement maker’s rating settles the question.

The Tractor Specs That Decide The Fit

Five tractor figures decide whether a stump grinder mounts and runs properly: rated PTO horsepower, PTO speed, hitch category, lift capacity, and hydraulic supply.

Woods rates the TSG50 for 15–50 PTO hp, and that window is what you compare against — not engine output. A tractor whose horsepower lands inside the range still fails if its PTO only turns at 1,000 rpm.

  • PTO horsepower: use the grinder maker’s published window, never the engine rating.
  • PTO speed: both ends must match; Woods lists 540 rpm for the TSG50 driveline.
  • Hitch category: the TSG50 takes Category 1 and Category 2, which proves the pins fit — not that the tractor can lift it or hold its front wheels down.
  • Weight and ballast: 520 lb before the PTO shaft, guards, and options. Compare that with lift capacity at the pins.
  • Hydraulics: confirm whether the configuration needs rear remotes or side-shift, and skip the hydraulic-equipped version if your tractor can’t feed it.
  • Clearance: the hitch has to let the cutting wheel reach the stump while the PTO shaft keeps a workable angle.

Then measure the work envelope: a 20-inch wheel, 24 carbide teeth, and a listed cut of 16 inches above and below grade. Check those numbers against your tallest stump and target depth.

Woods TSG50 Spec Listed Rating
PTO horsepower range 15–50 PTO hp
PTO speed 540 rpm
Hitch category Category 1 or 2
Implement weight 520 lb
Cutting wheel 20 in, 1,037 rpm
Cutter-tip speed 5,428 rpm
Teeth 24 carbide-steel
Max cut above and below grade 16 in / 16 in
Hub torque 76–250 lb-ft
Gearbox warranty Six years, limited

Those figures come from the Woods TSG50 specification page, worth quoting to a dealer when you ask for a written configuration.

PTO vs 3-Point Hitch On A Tractor Stump Grinder: Which Fits Yours?

PTO and three-point hitch aren’t competing options: the PTO supplies power, the hitch mounts and positions the tool. The actual fork is a PTO-driven three-point unit versus a hydraulic or skid-steer machine.

A three-point grinder suits a tractor with the PTO output and rear hitch already in place, and it stays compact around beds and fences. The trade: driveline torque and 500-plus lb of implement ride on the tractor, so lift capacity, ballast, and stability come first.

Hydraulic and skid-steer-style grinders earn their keep when the tractor’s PTO is undersized or when you want the head out front where you can see it. They need compatible flow, pressure, couplers, and auxiliary circuits, and requirements vary by model — check the unit’s manual rather than assuming your flow is enough.

Price comes last. Woods’ pricing document notes listed pricing excludes the current surcharge and offers no dependable retail figure for the TSG50, so ask a dealer for configuration, freight, and surcharge in one written quote. Starting from machines other owners have run is faster: these tested tractor stump grinder picks give you a shortlist.

Where Buyers Get It Wrong

Four mistakes cause most bad matches: sizing on engine horsepower, trusting hitch category alone, skipping PTO shaft fit, and ignoring what’s buried in the stump.

Engine horsepower lives on the brochure; the implement cares about PTO horsepower. Category 1 and 2 pins fit tractors that still can’t lift 520 lb safely at the links, and a PTO shaft sized for another tractor may be the wrong length or shielding.

Clear the site before the wheel turns. Rocks, wire, buried utilities, and metal chip carbide teeth and bend driveline parts, and thrown debris injures. Woods warns that the machine must never run with a safety shield removed, and setup follows the operator’s manual rather than a photo.

Then work in this order before signing:

  1. Record PTO horsepower, PTO speed, hitch category, lift capacity, hydraulic flow, and tire width.
  2. Measure stump height, target below-grade depth, and access width, then match the grinder’s envelope and weight to those numbers.
  3. Get configuration, price, and surcharge in writing from one dealer.

Common Questions

Can A Compact Tractor Run A PTO Stump Grinder?

Often, yes. The grinder’s published PTO window is Woods rates the TSG50 for 15–50 PTO hp at 540 rpm on a Category 1 or 2 hitch, which covers many subcompact and compact tractors. Lift capacity and front-end ballast usually decide whether a specific model works, not engine size.

How Deep Should A Stump Grinder Cut Below Grade?

Deep enough that the root flare stops showing through the lawn — 6 to 8 inches is a common target for mowing, and the TSG50 lists a maximum of 16 inches below grade. Compare a grinder’s published depth with your actual stump, not with its maximum stump diameter.

Will A Skid-Steer Grinder Attach To A Tractor?

Rarely without modification. Skid-steer-style grinders run off a skid-steer’s auxiliary hydraulic circuit, so they need matching flow, pressure, and couplers, and tractor three-point hydraulics seldom deliver the same supply. When the tractor lacks a suitable PTO or hydraulic capacity, renting a dedicated grinder costs less than converting the machine.

Sources

Scroll to Top