The right Whirlpool refrigerator part starts with the full model number on the label inside the food compartment — suffix included — matched to the illustrated parts list.
A door gasket that looks identical to the one you pulled off can still be the wrong revision. Whirlpool builds refrigerators in closely related versions, and the parts list for WRT518SZFW04 (white) is a separate document from the one for WRT518SZFB04 (black) and WRT518SZFM04 (stainless). The entire identification chain — label, model string, diagram, part number — has to line up before you order.
Below is where the label sits, how to read the suffix, and the specific mistakes that send parts back.
Where Is the Model and Serial Label on a Whirlpool Refrigerator?
Whirlpool lists several label locations on its refrigerators, and the wall inside the food compartment is the most reliable place to check. You may find the label on the top-left side of the food compartment, across the top-front area, or on the food liner at the upper-right side of the crisper pan.
Copy the model identifier character for character — letters, numbers, and the trailing two-digit suffix. Take a photo of the label with your phone before you close the door. Whirlpool asks for both model and serial numbers before Customer Care can help, and the serial tracks your individual appliance while the model selects compatible parts.
The label locations above come from Whirlpool’s model and serial number guide.
Whirlpool Refrigerator Part Lookup: Reading the Suffix Correctly
The final characters of the model number identify the revision, finish, or configuration, and skipping them is the most common reason a part arrives wrong. WRT518SZFW04 and WRT518SZFM04 share a base family but differ in finish, which means trim pieces, handles, and door panels may not swap between them.
Parts lists are revision-specific technical documents, and Whirlpool publishes them per model. A few examples of what that looks like:
- WRFF3436RZ00 — stainless finish, parts list W11747718 Rev. A, dated September 2024.
- WRMF3636RW00 — white finish, parts list W11752067 Rev. A, dated September 18, 2024.
- WRS311SDHM12 — stainless finish, parts list W11750390 Rev. A, dated September 5, 2024.
- MFI2570FEW10 — white finish, parts list W11711690 Rev. A, dated February 2024.
- ASI2175GRW10 — white finish, parts list W11742239 Rev. A, dated July 12, 2024.
Those documents also list nonserviceable items, assemblies that bundle several pieces, and separate left- and right-hand parts. One example: a door listed with its gasket included, while the rollers and hinges that mount it carry distinct left and right part numbers. Reading the assembly description matters as much as the number.
Six Mistakes That Send Whirlpool Parts Back
Most failed orders trace to a small set of errors, and each one is cheap to avoid during the lookup.
- Searching by series name. A marketing family name will not pull the right diagram; only the complete model string does.
- Dropping the suffix. The trailing digits can mark a different revision, finish, or production run.
- Mixing up model and serial. The serial identifies your unit; the model picks the parts.
- Matching by eye. A gasket or shelf that looks right may belong to a neighboring model.
- Ignoring finish. White, black, and stainless components carry different part numbers.
- Treating an assembly as its parts. The bundle number and the individual component number are not interchangeable.
When you are ready to skip the lookup and buy a tested replacement, this roundup of common Whirlpool refrigerator parts saves you a search on the popular pieces.
How Do You Confirm a Whirlpool Part Fits Before Buying?
Confirm fit by locating the component in the model-specific illustrated parts list and checking its callout number, description, finish, and included hardware against the listing. Whirlpool’s accessory pages tell buyers to verify model compatibility before purchase, and that check is the one step worth repeating twice.
If the diagram search returns nothing, call Whirlpool Customer Care with both the model and serial numbers in hand. The Whirlpool owner support page is the current entry point for that help and for the parts catalog itself.
Before you service anything, unplug the refrigerator. Sealed-system, refrigerant, electrical, and water-line work may need qualified personnel, and a part that looks identical is never a substitute for the part number the diagram calls out.
Common Questions
Can a dealer order parts from my model number alone?
Usually yes. Give the dealer the complete model string including the suffix, plus the part description and finish from the diagram. The serial number is also useful because it lets the dealer confirm the production revision. Without the full model, the dealer is guessing between closely related versions that use different parts.
Why does the same part have two part numbers?
Two numbers usually mean two finishes, two revisions, or separate left- and right-hand versions. A hinge assembly on one side does not mirror the other, so Whirlpool sells them individually. Check the diagram callout and the finish label before you choose; a stainless piece will not match a white door frame.
What if my model number returns no parts list?
Contact Whirlpool Customer Care directly with the model and serial numbers from the label. The model may be sold under a different revision or listed under a related document. Whirlpool states those numbers should be available before you reach out, and having them ready makes the call shorter.
Sources
- Whirlpool. “Find Your Model & Serial Number” Lists the refrigerator label locations and the model-and-serial requirement.
- Whirlpool. “Customer Care & Support” Entry point for Whirlpool owner support and parts lookup.
- Whirlpool. “Repair Parts List, ASI2175GRW10, W11742239 Rev. A” Example of a model- and revision-specific parts document.