An XL kennel fits a dog that can stand, sit, turn, and stretch out inside it — measure floor-to-head and nose-to-tail, then add 3–4 inches to each.
A kennel labeled XL can still be the wrong box. Sizing labels drift between brands, and the number printed on the carton is usually the outside of the crate, not the space your dog actually gets. The American Kennel Club’s own crate guidance points the same way: measure the standing dog from the top of the head to the floor and from the nose to the tip of the tail, then add 3–4 inches to both figures. That measurement, not the label, decides what you buy.
The steps below take about five minutes. They also cover the mistakes that push people into a second purchase — measuring to the shoulders, trusting a weight chart, or buying a crate the dog can soil at one end and sleep at the other.
How Do You Measure A Dog For A Crate?
Stand the dog on a level floor in a natural stance, measure floor to the top of the head and nose tip to tail tip, then add 3–4 inches to both numbers. Erect ears get measured to the ear tips, since a standing ear can graze a roof that a folded one clears.
Work in this order:
- Height first: floor to the top of the head, or to the ear tips if the ears stand up.
- Length second: from the tip of the nose to the tip of the tail. The AKC’s home-crate method uses the tail tip, not the tail base.
- Add 3–4 inches to each result. That total is your minimum interior height and interior length.
Now compare those figures against the manufacturer’s interior dimensions, not the exterior ones. Usable space inside can run 1–2 inches smaller than the advertised outside. Then drop the mat or bed in and check headroom again — a thick mat quietly eats an inch of clearance. A dog that can stand on bare floor but not on its bedding doesn’t fit.
What Size Is An XL Dog Kennel?
Most US manufacturers treat roughly 42–48 inches of length as extra large, but no single nationwide XL specification exists, so the interior tape measure beats the label every time.
The commonly sold tiers look like this:
| Nominal Size | Example Dimensions (L × W × H) | Typical Weight Guide |
|---|---|---|
| Large | 36 × 24 × 27 in | 41–70 lb |
| Extra large | 42 × 28 × 30–31 in | 71–90 lb |
| XXL | 46 × 30 × 33 in | 90 lb and up |
| 48-inch class | 48 × 30 × 32 in | Very large breeds — verify by measurement |
Treat the weight column as a rough cross-check, never the deciding number. Two Labrador-sized dogs of the same weight can differ by three inches of body length and a wider chest, and a deep-chested dog needs width the chart never mentions. Breed labels fail the same way.
For context on how loose these labels get, Petmate’s own kennel-mat listing sells an XL mat at 36.5 × 23.5 inches for dogs listed at 70–90 lb — mat dimensions, not kennel dimensions, and a useful reminder to read the specs of the exact product in front of you. Once your numbers are on paper, a tested roundup of extra large dog kennels worth buying saves you from comparing a dozen spec sheets yourself.
The AKC’s guide to choosing a dog crate is the reference behind the measuring method above, and it’s worth reading in full before you buy.
Why A Crate Can Be Too Big
An oversized crate invites a housebroken dog to relieve itself at one end and sleep at the other, which is exactly the habit crate training is meant to prevent. The AKC flags this directly.
So aim for the smallest kennel that still passes all four checks: standing without the head touching the roof, sitting without contact, turning around, and lying down fully stretched. A dog that clears all four with an inch or two to spare is correctly sized. Extra room beyond that is a downside, not a bonus.
Puppies are the one exception. Buy the adult-size crate now and use an adjustable divider to shrink the usable space, widening it as the dog grows. That way one purchase covers the whole growth curve instead of three.
What Do People Get Wrong Most Often?
The most common error is measuring the wrong landmarks: length from the neck or shoulders instead of the nose, height to the shoulders instead of the head, or length to the tail base when the method calls for the tail tip. Each one undersizes the crate by several inches.
The other frequent misses:
- Buying off the exterior dimensions and never checking interior space.
- Letting a weight range or breed chart override the tape measure.
- Forgetting the mat’s thickness when checking headroom.
- Assuming XL on one brand’s box means the same inches as XL on another’s.
If your dog lands between two sizes, or the ears, chest, or bedding eat the margin, size up. Travel and airline containers follow a stricter four-measurement formula, so don’t reuse a home-crate number for a flight crate.
Common Questions
Should I measure my dog sitting or standing?
Measure standing, in a natural stance on a level floor. Standing height and full nose-to-tail length are the figures the AKC method uses, and a sitting dog compresses both. Have a second person steady the dog and keep the head level so the tape reads true.
Will a 48-inch crate fit a Great Dane?
Sometimes, and only by measurement. A 48-inch class crate often runs about 48 × 30 × 32 inches, and a tall Dane may need more interior height than that. Measure floor to head and nose to tail, add 3–4 inches, and compare against the interior specs rather than the class name.
Does the kennel mat count against the height?
Yes. Bedding raises the floor, so a dog that stands cleanly on bare plastic can lose headroom once a mat goes in. Add the mat’s thickness to your required interior height before you commit to a size.
Sources
- American Kennel Club. “How to Choose the Best Crate for Your Dog.” Source for the measuring method, the 3–4 inch allowance, and the oversized-crate warning.
- Petmate. “Petmate Kennel Mat.” Lists the XL mat dimensions and 70–90 lb weight range.