How to Connect a Soundbar to Your TV (HDMI ARC, Optical, Bluetooth) | Which Cable Wins

HDMI ARC or eARC is the best way to connect a soundbar to a TV when both have the port, because one cable carries the audio and lets the TV remote run the soundbar’s power and volume.

A soundbar sitting silent under a new TV usually comes down to one of two things: the cable is in the wrong jack, or the TV is still sending sound to its own speakers. HDMI ARC fixes both in a single cable — the TV pushes audio back down the same connection it receives, and HDMI-CEC lets one remote control both devices.

Not every TV has ARC, and not every soundbar plays nice with it. Here is the full picture for all three connection types, in the order you should try them.

Why HDMI ARC Or eARC Should Be Your First Try

ARC stands for Audio Return Channel: the TV sends audio back to the soundbar over the HDMI cable instead of requiring a separate cable. Plug one end into the TV’s HDMI ARC or HDMI eARC port and the other into the soundbar’s HDMI ARC/eARC port — these ports are labeled, so read the fine print next to the jack before you commit.

Then turn on HDMI-CEC, which the manufacturer may call Bravia Sync, Anynet+, or SimpLink. On a TCL Google TV, Google documents the path as Settings > Channels & Inputs > Inputs > eARC Mode, then enabling HDMI Control, then Settings > Display & Sound > Audio > Audio Output > ARC. The audio output option now reads ARC, and the soundbar’s display should confirm the handshake.

If the picture is fine but the soundbar is mute, set Digital Audio Out to Auto, PCM, or Pass Through. The right one depends on what your soundbar can decode — PCM is the safest compatibility fallback.

One known snag: a soundbar sitting in the HDMI chain between a streaming stick and the TV can add processing delay or block CEC commands. Google’s own guidance is to test the source device plugged directly into the TV and route the audio through ARC instead.

When Optical Is The Smarter Call

Optical, also called TOSLINK, is the reliable fallback when your TV has no ARC port or the two devices refuse to talk. The TV needs a Digital Audio Out port and the soundbar needs an Optical In port, and the cable clicks in firmly at both ends.

Pull the tiny protective caps off first, then select Optical, D.IN, or TV on the soundbar and point the TV’s audio output at the optical connection. A red glow at the end of the cable confirms the port is live — that light is your success signal.

If you get silence, set the TV’s digital output to PCM or stereo uncompressed; a soundbar that can’t decode the TV’s multichannel format will stay quiet otherwise. Treat the cable gently — optical glass doesn’t tolerate sharp bends, and a partially seated plug is a common cause of dropouts.

The trade-off is control: optical carries no CEC, so your TV remote won’t power the soundbar or adjust its volume the way HDMI ARC does. Check a source like a streaming app rather than a broadcast channel when testing, since optical formats vary by source.

Bluetooth: The Wireless Last Resort

Bluetooth works when neither cable route is available, but it brings lip-sync delay that you’ll notice on live TV and fast-moving video. Put the soundbar into pairing mode, then on Google TV open Settings > Remote & Accessories > Pair remote or accessory, pick the soundbar, and approve Pair. The soundbar disappears from the list once it connects — that’s how you know it worked.

Google TV supports only one Bluetooth audio device at a time, so a paired headset will block the soundbar until you disconnect it. To reconnect a device you’ve paired before, return to Settings > Remote & Accessories, select it under Accessories, and tap Connect. If pairing keeps failing, power-cycle the soundbar, clear unused paired devices, and restart the TV before trying again.

Bluetooth also won’t carry the surround formats eARC handles, and range plus nearby radio interference matter more than you’d expect — keep both devices close and clear of routers.

Which Connection Fits Your Setup?

Connection Best For What You Give Up
HDMI eARC TVs and soundbars that both list eARC Needs CEC enabled; occasional handshake quirks
HDMI ARC Older ARC-equipped TVs and soundbars Higher-bandwidth formats unsupported
Optical/TOSLINK TVs with no ARC port; stubborn setups No CEC remote control; PCM may be required
Bluetooth Wireless rooms with no cable route Lip-sync delay; limited surround support

Whichever route you pick, avoid the mistakes that account for most silent soundbars: HDMI in a plain TV input instead of the ARC-labeled one, the cable in the soundbar’s HDMI input rather than its ARC port, and a TV still pointed at its built-in speakers. After any connection change, recheck the soundbar’s input selection first — it’s the cheapest fix there is.

If your build budget is tight, a roundup of affordable TV soundbars that still deliver helps you match the connection to the unit you plan to buy. Google’s setup documentation for Google TV audio and input settings walks through the exact menu paths if yours differs slightly from the steps above.

Common Questions

Do I need a special HDMI cable for eARC?

A standard HDMI cable is normally sufficient for ARC. eARC depends on whether the TV, soundbar, and cable all support it, so confirm on the spec sheet rather than assuming a new cable will solve it. A cable rated for high bandwidth raises your odds, but it can’t add eARC to hardware that doesn’t have it.

Why is my soundbar silent after connecting it?

Three usual suspects: the cable is in a non-ARC HDMI port, the soundbar is set to the wrong input, or the TV’s audio output hasn’t been switched to ARC or optical. Cycle through the soundbar’s inputs once, confirm ARC is enabled in the TV audio menu, and set digital output to PCM if a multichannel format is the blocker.

Can I use the TV remote to control the soundbar?

Yes, with HDMI ARC or eARC and HDMI-CEC enabled on both devices. The TV remote can then handle power and volume for the soundbar. Optical and Bluetooth connections don’t pass those commands, so you’ll use the soundbar’s own remote for those routes.

Sources

Scroll to Top