How to Connect a Gaming Headset to PS4 | Match the Jack

A PS4 headset connects three ways: a 3.5 mm plug into the DUALSHOCK 4 controller jack, a supplied USB wireless adapter, or an optical cable into a base station.

The plug you hold decides the whole setup — and one wrong setting leaves the game audio blasting from the TV while the headset sits silent. Most failed connections come down to a single toggle buried in the PS4 menu, not a broken accessory. Below are the exact paths for each connection type, the settings that matter, and the one mistake that trips up nearly everyone on the first try.

Wired 3.5 mm: Plug Into the Controller, Then Switch to All Audio

A wired headset uses the headset jack on the bottom of the DUALSHOCK 4 controller, and the console routes sound there through one menu toggle. Plug the 3.5 mm connector in until it seats fully — a half-inserted plug is the most common reason a wired headset stays quiet.

Next, hold the controller’s PS button to open the quick menu, then go to Sound/Devices > Output to Headphones and choose All Audio. You can also reach the same setting through Settings > Devices > Audio Devices > Output to Headphones. The default is Chat Audio, which sends only voice chat to the headset and leaves game sound on the TV — that default is why so many players hear teammates but not the game.

USB Wireless: The Adapter Pairs the Headset, Not Bluetooth

A wireless PS4 headset connects through its own USB adapter, not through standard Bluetooth pairing, and the indicator light turns solid once the link is live. PlayStation’s pairing guide lays out the order plainly: charge the headset with its original USB cable, plug the wireless adapter firmly into a PS4 USB port, switch the headset on, and wait for the indicator to stop blinking.

If the headset never appears, work through the three usual culprits before assuming a defect. Reconnect the adapter so it sits flush, top up the charge with the included cable, then power the headset off and back on. The Wireless Stereo Headset 2.0 (CECHYA-0083) needs version 1.60 or later, and the Platinum (CECHYA-0090) needs 4.00 or later.

Headset Type How It Connects Setting To Change
Wired 3.5 mm Controller headset jack Output to Headphones: All Audio
USB wireless Supplied USB adapter plus power Output to Headphones: All Audio
Optical / base station Base station to DIGITAL OUT (OPTICAL) Primary Output Port: DIGITAL OUT
Gold Wireless CUHYA-0080 USB adapter Needs system software 5.00+
Wireless Stereo 2.0 USB adapter Needs system software 1.60+
Platinum CECHYA-0090 USB adapter Needs system software 4.00+
Any wired headset 3.5 mm jack Check plug seated fully

Optical and Base Station Setup: Point the Console at the Optical Port

An optical headset or base station runs a cable into the PS4’s DIGITAL OUT (OPTICAL) port, and the console must be told to send audio there. Run the cable from the base station to that port, then open Settings > Sound and Screen > Audio Output Settings > Primary Output Port and pick DIGITAL OUT (OPTICAL). PlayStation’s audio output guide notes that optical users may also need to set the headset’s own supported audio format to match.

The console’s default Audio Format (Priority) is Linear PCM, a setting found under Settings > Sound and Screen > Audio Output Settings. This connection needs a PS4 model and a headset or base station with matching optical ports. Slimmer setups without an optical port should fall back to the controller’s 3.5 mm jack or a supported USB adapter.

Choosing a headset before you wrestle with cables is worth the ten minutes. Our roundup of the best video game headset for PS4 covers connection type and fit so the setup above is a one-time job.

Get the Audio Settings Right on the First Try

Two settings do almost all the work: Output to Headphones set to All Audio, and the correct primary output port for your connection type. Everything else is polish.

For Sony’s Gold Wireless Headset, All Audio sends both game and chat sound to the ears, while Chat Audio sends chat only — and the headset’s SOUND/CHAT buttons only behave properly on All Audio. Sony’s manuals also note that more than one headset can be used with a PS4 system, which helps if two players want their own audio.

  • Game sound stuck on the TV? Switch from Chat Audio to All Audio.
  • Headset not showing up? Reseat the USB adapter, charge it, and power-cycle the headset.
  • Wired set still silent? Push the 3.5 mm plug in until it clicks fully.
  • Optical set quiet? Confirm the primary output port is set to DIGITAL OUT.
  • Keep the console updated — Sony’s headset manuals recommend the latest system software.

PlayStation’s PS4 audio output settings guide walks through each routing menu, and the pairing procedure covers the wireless order step by step. After you switch to All Audio, the next sound you hear should land in the headset the instant the menu closes — that’s the confirmation the routing took.

Common Questions

Why does my headset only play chat audio?

The PS4 defaults to Chat Audio, which sends voice chat alone to the headset and leaves game sound on the TV. Open Settings > Devices > Audio Devices > Output to Headphones and switch it to All Audio to hear game sound and chat together.

Can I use ordinary Bluetooth headphones with a PS4?

Not through standard Bluetooth pairing. Sony’s PS4 procedure requires the headset’s own USB adapter, so wireless models built for the console connect that way. A regular Bluetooth pair of headphones generally won’t link up without a separate compatible adapter.

Do I need to update the PS4 before using a wireless headset?

It depends on the model. The Gold Wireless Headset (CUHYA-0080) needs system software version 5.00 or later, the Wireless Stereo Headset 2.0 needs 1.60 or later, and the Platinum needs 4.00 or later. Updating the console covers all three and is worth doing first.

Sources

Scroll to Top