How to Choose a TV Mount for a 43 Inch TV? | Match The VESA

A 43-inch TV needs a mount matched to its VESA hole pattern and stand-free weight, not its screen size — most sets fall in the 200 × 100 mm to 300 × 300 mm range.

One wrong order and you’re holding a mount whose holes don’t line up with your TV. Four numbers decide fit: the VESA pattern, the weight without the stand, the screw depth, and the wall behind it. Here’s each one, then which mount style fits which room.

What VESA Pattern Does Your 43 Inch TV Use?

Measure the horizontal and vertical distance between the four threaded holes on the back of the TV, in millimeters — that pair of numbers is your VESA pattern. Common 43-inch patterns include 200 × 100 mm and 300 × 300 mm, though some sets use 200 × 200 mm.

Measure hole to hole, edge to edge. A 200 × 100 mm pattern looks rectangular; a 300 × 300 mm pattern is an even square. Get these wrong by even 100 mm and the mount’s arms won’t reach.

But VESA notes individual models can deviate from guideline dimensions, so the TV’s own manual is the final word.

Why Mount Weight Rating Matters More Than Screen Size

Use the TV’s weight without its stand and pick a mount whose maximum rating exceeds it. Screen size only matters for physical space — the wall bracket carries the load, and 43-inch weights vary widely across models.

Find stand-free weight in the TV manual or manufacturer’s product page. Never use shipping weight or weight with the stand — those run heavier than what hangs on the wall, and over-specifying wastes money just as under-specifying risks the TV.

It fits many 43-inch sets but not one with a 300 × 300 mm pattern. To see which models clear both bars, our tested 43-inch TV mount roundup breaks down the options side by side.

Which Mount Type Fits Your Room And Viewing Angle?

A fixed mount sits closest to the wall and costs least; a tilting mount helps when the TV hangs above eye level; a full-motion mount adds reach and swivel for corners or shifting seating.

  • Fixed mount: lowest profile, best when seating faces the TV directly and you can reach the connections before hanging.
  • Tilting mount: tilts down 5°–15° to cut glare and improve the viewing angle from a low sofa.
  • Full-motion mount: extends and swivels up to 90° each way, but the extended arm puts more leverage on the wall — solid stud anchoring is non-negotiable.

Check the mount’s extension clearance, the TV’s connector location, and any soundbar below the screen before committing. A full-motion arm that pulls into a doorframe is a problem no spec sheet warns about.

Installation And The Mistakes That Cost You The TV

Work in order and the install stays boring: confirm the TV’s weight, VESA pattern, screw diameter, screw length, and hole depth, then confirm the mount supports that exact pattern and exceeds the stand-free weight.

Screws deserve their own warning. Too long a screw damages internal components; too short and the display never tightens. Wall-mount screws are often sold separately, so read both manuals before grabbing hardware.

Locate studs or another structurally adequate surface — use drywall anchors only where the mount maker explicitly permits them. Mark the bracket with the template and a level, bolt the wall plate on, attach the vertical rails with the correct screws and spacers, and hang the set with two people. Secure every locking mechanism, verify stability, then test tilt and swivel slowly while watching that no cable is pulled or sharply bent.

Avoid these mistakes: don’t pick a mount just because it says “for 43-inch TVs,” don’t confuse 200 × 100 mm with 200 × 200 mm, don’t reuse stand screws, and don’t hang a full-motion arm without accounting for the extra leverage. Two people or a professional, a level, and an independently certified mount — UL, CSA, or ETL — round out the safe install.

Common Questions

Can I wall mount a 43-inch TV without studs?

Only if the mount manufacturer explicitly permits drywall anchors, which most full-motion mounts do not. Fixed and tilting mounts rated for light TVs can sometimes use heavy-duty toggle anchors, but the safer path is at least one stud or a plywood backer board. Consult the mount’s instructions before drilling.

Where do I find the VESA pattern for my TV?

The pattern is printed in the TV’s manual and usually stamped on a sticker near the mounting holes on the back panel. If the sticker is missing, measure hole to hole in millimeters — horizontal first, then vertical — and cross-check against the manual before buying.

Does a 43-inch TV always use 300 × 300 mm?

No. Many 43-inch sets use 200 × 100 mm, and some use 200 × 200 mm. The pattern tracks the chassis design, not the screen diagonal, so two 43-inch TVs from different brands can take completely different mounts. Always confirm the pattern on your specific model.

Sources

  • VESA. “Mounting Standards” Defines the Flat Display Mounting Interface sizes and weight classes.
  • Ergotron. “VESA Standard” Confirms hole pattern and display weight as the primary compatibility criteria.
  • SANUS. “TV Mounts” Lists VSF716 and VSF817 specifications, pricing, and VESA compatibility.

Scroll to Top