Matching a semi truck tire starts with the axle load, then the load index, speed symbol, and D, T, or Z position code.
A 295/75R22.5 that carried a loaded trailer last month can be the wrong tire for the same tractor this month. The size never changed, but the axle load did. Working out how to choose semi truck tires — load range, speed rating, and drive vs trailer positions — runs backward from the load, never forward from the price tag.
Michelin’s commercial guides keep the order consistent: approved fitment, then load, then speed, then axle position. Nail those four and tread design turns into a preference instead of a gamble.
What Do Load Range And Speed Rating Control?
Load index and speed symbol together form the service description, and both must meet or beat the vehicle manufacturer’s requirement for that axle. A tire that looks big enough on paper still fails if the inflation pressure needed to carry the load exceeds the wheel’s own rating.
Michelin’s example, a 315/70 R 22.5 154/150 L, shows how much rides on that string. The paired load indexes 154/150 split single- from dual-tire capacity, and L is a speed symbol. Load range is a class label; the load index is the number that has to cover the axle. Size alone establishes no capacity at all.
Four things line up before a tire qualifies:
- The load on that axle, single or dual mounted
- The tire maker’s current load-and-inflation table for that exact size
- The wheel’s maximum load and inflation limits
- The speed symbol against the truck’s operating speed and route
A higher load rating never raises the truck’s approved gross vehicle weight, axle rating, or legal load limit — only the vehicle manufacturer moves those. The speed symbol is a ceiling under stated load, not permission to run past posted limits, fleet rules, or weather. Michelin’s commercial truck tire selection and position guide spells out both points.
Each sidewall mark answers a different question:
| Sidewall Mark | What It Governs | Where To Confirm It |
|---|---|---|
| Load index (154/150) | Capacity for single vs dual mounting | Tire maker’s load-and-inflation table |
| Load range | Capacity class within a size | Manufacturer data for that size |
| Speed symbol (L) | Top rated speed at its stated load | Vehicle manufacturer’s requirement |
| Position code Z | Steer and all-position duty | That individual tire’s approval |
| Position code D | Powered drive axles | That individual tire’s approval |
| Position code T | Trailer axles | That individual tire’s approval |
| Rim width and dual spacing | Fitment and clearance | Wheel manufacturer’s limits |
| Axle rating | Legal load ceiling | Vehicle placard and OEM spec |
Drive Versus Trailer Positions: Where Each Tire Belongs
Drive tires belong on powered axles and trailer tires on trailer axles; Michelin codes them D and T, with Z for steer and all-position duty. Position approval belongs to the individual tire, so an all-position model moves to a drive or trailer axle only when that specific tire’s approval, load rating, and speed rating allow it.
Drive tires transmit engine torque and braking force, so their tread and construction are built for traction and wear on the surfaces the truck runs. Trailer tires carry load and are built for stability, rolling efficiency, and resistance to irregular wear. Swapping because the size matches is the expensive error: a trailer tire on a powered axle, or a drive tire on a spread-axle trailer where scrub eats the shoulders.
Service type matters as much as position. Long-haul highway, regional delivery, urban high-scrub, mixed service, and construction duty each change what tread and casing survive. Adding a wider tire also means re-checking dual spacing — a tire can be the right size and still sit too close to its partner.
Comparing models rather than specs? Our tested semi truck tires roundup lists current options by position and size.
The Order To Work In Before Anything Gets Mounted
Most bad semi truck tire purchases trace back to the same handful of shortcuts: picking by size, mixing sizes or load capacities across one axle, fitting a tire outside its approved position, ignoring a directional arrow, or buying on advertised fuel economy while skipping traction, scrub, payload, and retread plans.
Work down this list once per axle:
- Pull the vehicle, axle, tire, and wheel specs, and stay with the approved size and fitment.
- Establish actual and legally permitted load on each axle, single or dual mounted.
- Check the load index and required cold inflation in the current manufacturer table.
- Confirm the speed symbol against the truck’s operating speed and route.
- Set the position: D for powered axles, T for trailer axles, approved Z otherwise.
- Verify rim compatibility, dual spacing, clearance, and rotation direction before mounting.
Inflation settles last, set from the load-and-inflation data and held inside the wheel’s limits. Reconfirm all of it whenever the truck’s original configuration changes.
Common Questions
Can a trailer tire go on a drive axle if the size fits?
No. A trailer tire’s construction and tread are built to carry load, not to transmit torque and braking force, and its approval covers trailer axles only. Michelin codes trailer tires T and drive tires D for that reason. Fitting one to a powered axle leaves the truck outside its approved configuration, and traction and wear can suffer immediately.
Does a bigger load range mean the truck can legally haul more?
No. A higher load range or load index raises what the tire can carry at a given inflation pressure, but it cannot raise the vehicle manufacturer’s approved gross vehicle weight, the axle rating, or the legal load limit. Those come from the truck’s design and its placard. A heavier tire never re-rates the axle above it.
Where do I find the load index and speed symbol?
Both sit on the sidewall inside the service description, printed after the size. On a 315/70 R 22.5 154/150 L, the 154/150 are load indexes for single and dual mounting, and L is the speed symbol. Confirm that pairing against the tire maker’s current load-and-inflation table before you rely on it.
Sources
- Michelin. “Commercial Truck Tire Basics and Markings” Source for position codes Z, D, and T, service description definitions, and the rule that a higher rating cannot raise vehicle ratings.
- Michelin. “Commercial Truck Tire Sizes and Fitment” Source for paired load indexes, dual vs single capacity, and the warning that size alone establishes no load capacity.
- Michelin. “How to Choose the Right Truck Tires for Your Fleet” Source for drive versus trailer construction priorities and matching tires to service type.