Big and Tall Tactical Shorts Sizing Guide: How to Get the Right Fit

Order shorts in your jeans size and you’ll likely send them back. Knowing that gap, plus your hip measurement, gets the right pair on the first order.

How Do You Measure For Tactical Shorts?

Measure your waist where the shorts will sit and your hips at their fullest point — 5.11’s official method uses both, and waist alone won’t tell you whether the seat and thighs will clear.

  • Waist: wrap the tape where you normally wear your waistband, over the underwear and belt you’ll use. Don’t cinch it tight.
  • Hip: feet together, tape parallel to the floor, around the fullest part of your seat.
  • Inseam: from the crotch down the inside of the leg to your ankle or desired length. The chart says measure this separately.

Chest, arm length, and neck on the same chart apply to tops and outerwear — not shorts.

What Sizes Does 5.11 Tactical Actually Offer?

Some 5.11 pages stop at numeric 48 / 3XL, and colors or lengths can be missing at the top of the run — check the exact US product page and color before committing.

Height picks length; waist and hip pick circumference. Mixing them up is how a 6-foot-2 shopper gets a waist that fits and a hem that doesn’t.

The table condenses key stops on the chart. If your waist or hip lands between rows, size up — the measurements are the garment’s target, not a tight ceiling.

Numeric Tag Pant Waist Hip
34 (L) 36 in 42½ in
38 (XL) 40 in 46½ in
42 (2XL) 44 in 50½ in
46 (3XL) 48 in 54½ in
50 (4XL) 52 in 58½ in
54 (5XL) 56 in 62½ in
58 (6XL) 60 in 66½ in
60 (6XL) 62 in 68½ in

Where Do Most Big and Tall Shoppers Get It Wrong?

Treating the printed tag as your body size is the costliest mistake and underlies the rest:

  • Measuring at the navel. That’s not where shorts ride. Use the waistband line.
  • Measuring over bulky clothes. A tape over cargo pockets and a thick belt reads several inches fat.
  • Skipping the hip number. A waist that closes but a seat that binds means the wrong row.
  • Assuming brands convert the same way. No universal standard governs tactical sizing; another maker’s 42 may not match 5.11’s.
  • Buying by height alone. Height sets length, not circumference.
  • Reading “10-inch” or “11-inch” as inseam. Those describe style and cut; the chart still says measure inseam yourself.

5.11 publishes these measurements for its own garments; they don’t prove a pair works with armor, a duty belt, or a specific holster. Fit for loaded pockets and attached gear depends on belt loops, rise, fabric stretch, and cut — details that vary by model and can’t be swapped between them.

Too tight restricts your stride; too loose shifts when pockets carry weight. Circumference accuracy is a mobility question as much as a comfort one. For tested options across the larger end of the range, this roundup of men’s big size tactical shorts covers models worth comparing.

How Do You Order The Right Pair The First Time?

Five steps, in order:

  1. Put on the underwear and belt you’ll wear with the shorts.
  2. Measure your waist at the wearing position, tape snug but not tight.
  3. Measure your hips at the fullest point.
  4. Match both numbers against the chart for the exact model you want.
  5. Pick the length category from your height, then confirm waist and hip ranges are both covered.

The chart behind these numbers is published on the official Stryke Shorts product page. Confirm current price, stock, and return terms there before ordering, since the chart and size availability can differ between colors and product versions.

Common Questions

Is the size on the tag my actual waist measurement?

No. The numeric tag runs two inches below the pant-waist figure it corresponds to — a tag reading 46 pairs with a 48-inch waist. Compare your measured waist to the chart’s pant-waist column, not the label.

Do all 5.11 shorts come in 4XL through 6XL?

Not reliably. Verify the exact model, color, and size on the US product page before ordering.

What if my waist fits but the hips feel tight?

Ignore the waist fit and check the hip column. If your measured hip sits above the chart’s hip figure for that size, move up a row — even if the waist would have closed. Hip clearance drives comfort through the seat and thighs and how freely you move.

Sources

Scroll to Top