Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
You want ballpark stripes on your lawn without mowing the same grass twice. A striping kit does that by bending the grass blades behind your deck so light reflects in bands. The tricky part is fitment: a kit built for a 60-inch deck will not bolt onto a 42-inch stamped deck, and several of these kits only fit one brand of zero-turn. Match your deck size and mower brand first, then pick from there.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
A quick honesty note before the list: this guide uses flexible matching for zero-turn deck striping kits, so the nearest same-type size or brand fit serves the same purpose rather than every pick being an exact model-number match. That is why the zero turn striping kit shortlist below leads with fitment before anything else.
Top Picks
How To Choose The Best Zero Turn Striping Kit
The single most expensive mistake here is buying a kit that does not fit your deck. A striping kit mounts under the back edge of the mower deck, and the mounting brackets are cut for one specific deck shape and width. Get that wrong and no amount of stripe adjustment will save you.
Start With Deck Width And Deck Type
Measure your cutting width and confirm whether your deck is stamped steel or fabricated. Kits are listed by the widths they cover on paper, but the deck construction matters just as much. The 19A70060 kit, for example, is built for 42″, 50″ and 54″ stamped decks only, so a fabricated 60-inch deck is out. Write your deck width and type on a sticky note before you shop.
Roller Or Bristle: Two Different Ways To Bend Grass
A roller kit drags a weighted drum across the grass and lays the blades over in one direction. A bristle kit uses flexible fingers to bend the tips of the blades so they catch light at a sharper angle. Bristles flex over uneven ground, which helps on lawns that roll. Rollers leave a consistent band but follow the deck rigidly.
Weight, Ground Contact, And Turning
Every pound you hang off the deck is weight the mower carries around every turn. A heavy kit intensifies the stripe but adds stress on the deck and can scuff turf in tight turns. Check the listed weight and think about how tight your mowing pattern is.
Check The Warranty And The Hardware List
A striping kit lives in the dirt and grass-clipping zone, so the parts that wear are the ones you cannot easily replace. Confirm the warranty length and whether mounting brackets come with the kit. Some kits need drilling, others bolt straight on with hand tools.
Side-by-Side Comparison
| Model | Best For | Weight | Deck Fit | Stripe Type | Amazon |
|---|---|---|---|---|---|
| 19A70059 OEM Lawn Striping Kit★ Best Overall | Cub Cadet Ultima and Troy-Bilt owners | 5.19 lb | 50″ / 54″ / 60″ | Roller | Amazon |
| 19A70060 OEM Lawn Striping KitBest for Stamped Decks | Stamped-deck Cub Cadet ZT1 owners | 7.78 lb | 42″ / 50″ / 54″ stamped | Roller | Amazon |
| CUB CADET 19A70059OEM | Genuine factory-part buyers | 5.7 lb | 50″ / 54″ / 60″ | Roller | Amazon |
| Ariens 79206700 Striping Kit | Ariens Apex and Gravely Pro-Turn owners | — | 48″ and above | Roller | Amazon |
| Husqvarna Commercial Striping Kit | Commercial decks with adjustable height | — | Commercial platforms | Rubber brush | Amazon |
| John Deere EZTrak Grass Groomer LP1000 | John Deere ZTrak and EZtrak owners | 14 lb | ZTrak Z540M, EZtrak Z200/Z400 | Bristle | Amazon |
Detailed Reviews
1. 19A70059 Lawn Striping Kit
One kit that covers three deck widths and barely adds weight to the deck.
The reason this one takes the top spot is the spread of deck sizes it covers. It is built for Cub Cadet Ultima Series mowers with 50″, 54″ and 60″ cutting decks, and it also lists compatibility with Troy-Bilt Mustang Z Series mowers running 50″, 54″ and 60″ fabricated decks. If you own either of those machines, you are not hunting for a brand-specific part number.
At 5.19 pounds it is the lightest roller kit here, and that lightness matters on a zero-turn. Deck-mounted weight is weight your mower swings around every turn, so a lighter kit means less turf scuffing and less stress on the hanging brackets. It mounts behind the deck and lays the grass over as you mow, so you stripe and cut in the same pass instead of running the lawn a second time.
The catch is fitment honesty, not machinery. This kit is sized for Cub Cadet and Troy-Bilt decks, so owners of other brands should not expect a bolt-on result. Screw the bracket to the wrong deck and no amount of adjustment fixes it. The kit ships with a step-by-step installation guide and a 12-month warranty. If your machine is on the list, this is the sensible first call.
What earns it first place
- Covers 50″, 54″ and 60″ decks from a single part number
- 5.19 pounds keeps deck load low and turns clean
- Mows and stripes in one pass, no second lap
- Comes with a step-by-step install guide and a 12-month warranty
Where it asks you to check twice
- Fits Cub Cadet and Troy-Bilt decks only, not a universal bracket
- Stripe intensity is fixed by the roller, not user-adjustable
Best fit: Cub Cadet Ultima or Troy-Bilt Mustang Z owners running a 50″, 54″ or 60″ deck who want light weight and one-pass striping.
Check your deck first: any other brand will need a different bracket entirely.
2. 19A70060 Lawn Striping Kit
The short-deck option for owners with a 42-inch stamped Cub Cadet deck.
If your Cub Cadet ZT1 Ultima has a 42-inch stamped deck, the 50/54/60 kits above simply will not fit — and this is the pick that will. It is listed for 42″, 50″ and 54″ stamped decks specifically, and the maker is explicit that it is not compatible with other brands or residential mowers. Run your model number before you order.
Where this kit differs from the wider 19A70059 above is the roller material description and the mounting approach. Its stamped steel roller is described as rust-proof and weather-resistant for wet grass and rough terrain. The brackets are adjustable, so you can shift the roller position to change stripe width. The stated dimensions are 15 inches long by 3 inches wide by 3 inches tall, and it weighs 7.78 pounds — noticeably heavier than the 5.19-pound 19A70059, which is roughly 2.7 times the weight for a shorter kit.
The maker promises a no-weld, no-drill install and backs the part with a 2-year warranty. It also claims a no-lubrication, low-maintenance design. That 2-year coverage is the longest on this list, which is why it ranks high for stamped-deck owners despite the narrower deck range.
Tight fit, real warranty: Cub Cadet ZT1 Ultima owners with a stamped deck get a purpose-built roller and the longest stated coverage here.
Do not cross-shop this one: its fit list stops at Cub Cadet stamped decks, so if your deck is fabricated or another brand, this is simply the wrong part.
Reach for this if: your Cub Cadet ZT1 Ultima runs a 42″, 50″ or 54″ stamped deck and you want adjustable bracket positioning.
Look elsewhere if: you need a kit for a fabricated deck or a different mower brand.
3. CUB CADET 19A70059OEM Lawn Striping Kit 50″ 54″ 60″ Deck
The factory part, stamped with the Cub Cadet name and built for the whole Ultima range.
Some buyers will not put an aftermarket bracket on a mower they paid real money for, and this is the official answer. It carries genuine Cub Cadet part number 19A70059GFP and replaces 19A70059OEM, so it is the factory part rather than a copy. The fit list is broader than either of the other Cub Cadet kits: ZT1-50, ZT1-54, ZT2-50, ZT2-54, ZT2-60 and ZT3-60, all with 50, 54 and 60-inch decks from 2019 onward.
You get a wider, stronger stripe because this roller measures 26 inches long by 6 inches wide and weighs 5.7 pounds. Compare that to the 19A70060 in second place: that one measures 15 inches long by 3 inches wide. So this factory roller is 26 inches by 6 inches — a much larger contact patch on the grass and a correspondingly stronger stripe. It is metal, finished in black, and the listing describes an ergonomic grip on the handle hardware.
Here is the honest trade-off. The factory warranty on this part is stated at 3 months, far shorter than the 2-year coverage on the aftermarket kit above. A striping roller lives in dirt and clippings, so short coverage is worth knowing before you buy. Buy it for the genuine part number and the broad Ultima fit list, not for warranty confidence.
The case for the real thing: genuine Cub Cadet part number and a fit list covering ZT1, ZT2 and ZT3 models up to 60-inch decks.
Know the trade-off: the stated warranty runs only 3 months, shorter than the aftermarket kit listed above.
Who this suits: Ultima owners who want the official Cub Cadet part and a wider roller for a sharper band.
The one caveat: if warranty length matters more than the factory nameplate, the aftermarket kit covers you longer.
4. Ariens 79206700 Striping Kit
For the Ariens and Gravely crowd, an OEM kit that covers Apex and Pro-Turn decks.
If you are mowing with an Ariens Apex or a Gravely Pro-Turn, none of the Cub Cadet kits above will do — and tracking down a striping kit for these two brands is harder than it should be. This one is Ariens OEM part 79206700, so it carries the factory part number just like the genuine Cub Cadet kit does.
The fit list is the reason to pick it. On the Ariens side it covers Apex 48″, Apex 52″ and Apex 60″, plus Zenith 60″. On the Gravely side it spans Pro-Turn 48″, 52″ and 60″, the Pro-Turn 148, 152, 152 EFI, 160 and 160 EFI, and the Pro-Turn Z 48, Z 52 and Z 60, plus Pro-Turn ZX 48. That is a long spreadsheet of specific models — check yours line by line rather than assuming the deck width settles it.
What you are buying here is fitment certainty for a narrow brand family, in black metal, sold as a single unit. Gravely and Ariens share the same corporate parent, which is why the part number covers both nameplates. It is a simple, single-purpose piece of hardware, and that is exactly what you want bolting to the back of a Pro-Turn deck.
The right part if: you own an Ariens Apex or Zenith, or a Gravely Pro-Turn, and you want the factory striping hardware.
Worth double-checking: the model list is long and specific, so confirm your exact machine before ordering.
5. Husqvarna Commercial Zero Turn Mower Striping Kit
A rubber-brush striper for big commercial decks that want a wide, soft contact patch.
This one comes at striping from the bristle side instead of the roller side. Husqvarna calls it a deck-mounted grass striping kit that uses a rubber brush to lay the grass over, and it is listed as a universal fit for applicable commercial platforms. That is a different bending action from the steel rollers above — the rubber brush flexes across the grass rather than dragging a hard drum.
The footprint is the big number here. It measures 37.5 inches long by 5 inches wide by 13 inches tall, which makes it a genuinely wide unit built to span a large commercial deck. Compare that to the stamped-deck 19A70060 kit at 15 inches long by 3 inches wide: this is a much wider brush, sized to swipe the whole cutting path in one go. It also lists 17 positions and an adjustable cutting height from 1.5 inches up to 4.5 inches.
Be honest about the direction of owner feedback on this one — durability of the rubber strips is the recurring theme, with reports of the brush cutting or ripping during use. That is the trade-off with a rubber-brush design: it is gentler than steel on the grass, but rubber is the part that wears. If your mowing routine is heavy commercial use, factor in how much rubber you will burn through.
Why it earns a spot
- Rubber brush lays grass over softly instead of dragging a hard drum
- 37.5-inch span suits large commercial decks
- 17 positions and adjustable height from 1.5 to 4.5 inches
What wears on this design
- Rubber strips are the wear part, and reports mention them cutting or ripping
- Universal commercial fit means you must confirm your deck takes it
Pick it for: a wide commercial deck and a soft rubber-brush stripe, with height adjustment across 17 positions.
Weigh this first: rubber is a consumable on this kit, so high-hour commercial mowing means replacing the brush over time.
6. John Deere EZTrak Grass Groomer Striping Kit LP1000
John Deere’s bristle groomer bends grass tips further for a deeper light contrast.
The approach John Deere took here is worth understanding before anything else. Instead of laying the whole blade flat with a roller, this uses bristles to bend the grass blades further than a mower deck does on its own. Bent tips reflect light at a greater angle, which is why the stripe reads sharper. Anyone who wants a strong contrast band should look closely at this design.
It is built specifically for John Deere decks: the Edge Decks on current ZTrak Z540M mowers, the model-year 2016 ZTrak Z355E, and the EZtrak Z200 and Z400 Series. John Deere sells it as the LP1000. It uses steel mounting brackets paired with the bristles, and John Deere states that only basic hand tools are needed to attach it, with no drilling required. Height sets in seconds with two screw knobs.
The weight is the honest catch. At 14 pounds it is the heaviest kit in this lineup, and by a wide margin — the 19A70059 up top weighs only 5.19 pounds. John Deere frames the steel brackets as keeping ground compaction unchanged, but the scale still reads 14 pounds hanging off your deck. On uneven lawns, the flexible bristles are designed to accommodate changing ground height and avoid scalping or berming in turns. If your yard rolls or your turns are tight, that flexibility is part of what you are buying.
Bristle advantage: bending blades rather than flattening them leans into the light reflection for a bolder contrast, and the bristles flex over uneven ground.
The weight to plan around: 14 pounds is the heaviest here, well above the 5.19-pound lightest kit, so it loads the deck more on every pass.
Made for: John Deere ZTrak Z540M, Z355E and EZtrak Z200/Z400 owners who want the bristle bend and easy knob height changes.
Think twice if: your deck already carries extra weight or you want the lightest setup available.
Know the Specs
Deck Width And Type
Deck width is the distance the mower cuts in one pass, and it has to match the kit’s bracket spacing exactly. Stamped decks and fabricated decks also have different mounting points, so a kit built for stamped steel may not fit a fabricated deck of the same width. Always match width and deck construction together, not just the number on your mower.
Roller Weight
Weight affects both stripe intensity and how the mower handles. A heavier roller presses harder and deepens the stripe, but it also adds load to the deck and can scuff turf in turns. Light kits like the 5.19-pound options here keep the deck nimble, while heavy bristle units like the 14-pound John Deere lean toward maximum bending force.
Roller Versus Bristle
Rollers physically flatten grass with a drum, giving a consistent band that follows the deck. Bristles bend just the tips so light reflects at a sharper angle, and they flex over uneven ground. Neither is automatically better — rollers suit flat, consistent lawns, while bristles tend to handle lumpy terrain better.
Mounting And Warranty
Mounting options range from bolt-on brackets with no drilling to more involved installs. Warranty length varies widely across these kits, so read the stated coverage before buying. A striping kit’s moving parts sit in grass clipping and dirt all season, which is why that warranty detail is worth checking.
Common Questions
Will a 60-inch striping kit fit my 42-inch Cub Cadet deck?
Can I install a zero-turn striping kit without drilling into my deck?
What is the difference between a roller striping kit and a bristle striping kit?
Does a striping kit add too much weight to my zero-turn deck?
Will a striping kit work with a fabricated deck or only a stamped deck?
Can I mow and stripe at the same time with one of these kits?
How do I know if the Ariens 79206700 kit fits my Gravely mower?
Do rubber-brush striping kits wear out faster than steel roller kits?
Can I adjust how sharp my lawn stripes look?
The Bottom Line
The smartest buy in this lineup is the 19A70059 OEM Lawn Striping Kit, because it spans 50″, 54″ and 60″ decks on both Cub Cadet Ultima and Troy-Bilt Mustang Z mowers while adding the least weight — 5.19 pounds — to your deck. If you run a 42-inch stamped Cub Cadet and want adjustable brackets with a 2-year warranty, the 19A70060 is the one that fits. And if you own an Ariens Apex or Gravely Pro-Turn, the Ariens 79206700 is the factory part that actually covers your deck.
One last thing worth acting on: the 19A70059 covers more deck widths than its near-twin and weighs less than every roller kit here, so confirm your deck width and order it today.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.