Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your zero-turn mower is already the strongest snow-moving machine on your street — it just needs a blade bolted to the front. A zero-turn plow bolts a steel blade to the front of that mower so you clear a driveway from the seat instead of walking behind a shovel. The short answer on which to buy: the Agri-Fab 60 in blade is the one to start with, because its seat-side handle angles the 14-gauge steel blade left, center, or right without you leaving the mower. One honest note before you read on: this list uses flexible, human-like matching for plow attachments that mount on a zero-turn mower, so not every pick is the exact width or model you searched — the nearest same-type size serves the same job, and each entry tells you its real dimensions.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
The three attachments below differ mainly in blade width, steel thickness, and mounting hardware. Read on for the specs, the fit notes, and the honest limits of each.
Top Picks
How To Choose The Best Zero Turn Plow
A zero-turn plow is a steel blade plus a mounting bar that replaces your mower’s cutting deck for the winter. Buy the wrong one and you spend more time drilling brackets than clearing snow. Here is what actually matters.
Clearance Width Sets Your Pass Count
A 48-inch blade and a 60-inch blade cover very different ground per run. Wider means fewer passes on a two-car driveway, but it also means more weight hanging off the front and more snow you are trying to push at once.
Steel Gauge Is Your Wear Number
Gauge describes steel thickness, and a lower gauge number means a thicker plate. A 14-gauge blade is a lighter plate; an 11-gauge blade is a thicker, heavier one that takes more abuse from ice chunks and gravel edges.
The Mounting Bar Is Where These Live Or Die
Every kit here bolts to a mounting bar under the mower. Before ordering, measure your mower’s frame and check the brand list in the listing — a blade that will not bolt up is useless no matter how thick the steel is.
Side-by-Side Comparison
| Model | Best For | Blade Width | Steel Thickness | Weight | Amazon |
|---|---|---|---|---|---|
| Agri-Fab 60 in Snow Blade★ Best Overall | Most zero-turn owners | 60 in | 14-gauge | 88 lb | Amazon |
| Country Manufacturing 5 ft Snowplow Kit | Widest coverage | 60 in (5 ft) | 11-gauge | — | Amazon |
| Country Manufacturing 4 ft Snowplow Kit | Tighter driveways | 48 in (4 ft) | — | 140 lb | Amazon |
Detailed Reviews
1. Agri-Fab 60 in Snow Blade for Zero Turn Lawn Mowers
The 60-inch blade you angle from a seat-side handle
The trick that makes this one the pick is the control handle running to your seat. You raise, lower, and swing the 60-inch blade left, center, or right while sitting on the mower, which means you shift snow direction mid-pass instead of stopping to fiddle with pins. That matters on a driveway where you want to push toward the lawn on one side and stack on the other.
The blade itself is 14-gauge steel with an adjustable scraper blade and an adjustable trip spring. The scraper edge is the strip that scrapes down close to pavement, and the trip spring lets the blade give when it hits something hard instead of taking the full hit. It is listed as fitting many popular zero-turn brands — John Deere, Toro, Cub Cadet, Hustler, Exmark, Scag among them — so check your model against that list first.
Weight is the honest trade-off: this kit ships at 88 pounds, which is a modest front-end load for a zero-turn but still real weight on the nose. At 88 pounds it is 52 pounds lighter than the 140-pound Country Manufacturing 4 ft kit, a difference you will feel in how quickly the front end dips when you drop the blade.
What earns the top slot
- Angles left, center, or right from a seat-side handle, so you stay put
- 60-inch width covers a wide strip per pass
- Adjustable scraper blade and trip spring handle ice and hard edges
- Broad brand compatibility across major zero-turn makers
- 3-year limited warranty backing
Where it asks more of you
- The 14-gauge plate is lighter steel than a thick 11-gauge blade, so treat ice chunks with care
- Fit is not universal — you must match your frame to the brand list
- A handful of buyers report units that failed early, so inspect the blade and hardware on arrival
Reach for this if: you want to steer the blade direction from the seat on a standard zero-turn and save your legs the walk.
One thing to know: the 14-gauge steel is not the heaviest plate here, so clear ice slabs at a sensible speed.
2. Country Manufacturing 5 ft Wide Zero Turn Snowplow Kit
Five feet of 11-gauge alloy steel for long driveways that take too many passes
If your driveway is long, the number that decides it is the width: this blade spans 5 feet, so you clear a wider strip in a single pass than the 4 ft kit beside it. The blade and handle are both built from alloy steel in 11-gauge — a thicker plate than a 14-gauge blade, which is what you want pushing into packed snow and the occasional buried rock.
Country Manufacturing ships the whole kit — mounting bar, hardware, and instruction manual — and the listing describes a simple assembly and a quick teardown when the season ends. It is made in the USA. Compatibility is broad rather than model-specific, so measure your mower frame and confirm the mounting bar matches before the first snowfall, not after.
Here is the honest limit: this is a manual-adjust blade, so angling is done by hand rather than from a lever at the seat. The 11-gauge plate and 5-foot span also mean more steel out front than the Agri-Fab. If you want the widest single-pass coverage and do not mind stepping off to set the angle, this is the one.
Built for the long driveway: 5 feet of 11-gauge alloy steel means fewer passes and a plate that shrugs off ice better than a thinner blade.
Set the angle by hand: the manual adjustment is a step off the mower each time you want to change direction.
Best for: long, wide driveways where covering ground fast beats convenience of adjustment.
Look elsewhere if: you want to swing the blade without leaving your seat.
3. Country Manufacturing 4 ft Wide Zero Turn Snowplow Kit
The 48-inch blade for driveways with tight fences and garage walls
Not every driveway wants the widest blade. This kit runs a 48-inch clearing width, which threads between a garage wall and a fence line more easily than a 5-footer. It is built from durable steel and listed for compatibility with most zero-turn mowers, and the box includes all the hardware plus a mounting bar to bolt it on.
It is a manual-adjust blade — you set the angle by hand, then drive. Ideal snow depth is listed at 36 inches, so it is rated for deep storm snow rather than a dusting. The whole kit is made in the USA by Country Manufacturing and ships as a single complete unit.
The weight is the thing to plan for. At 140 pounds, this kit hangs notably more steel off your mower’s nose than the Agri-Fab’s 88 pounds — you will notice it steering, and you’ll want to check that your front end and mounting bar can carry it. That extra mass also helps it hold a line when pushing into heavy snow.
Made for tight quarters: 48 inches of durable steel clears between fences and walls that a wider blade would clip.
Mind the front-end load: 140 pounds is a real weight to hang on the mower, so confirm your frame and bar are up to it.
Pick this one if: your driveway has tight edges and you want a blade that steers cleanly through them.
The catch: at 140 pounds it is the heaviest blade here, and the angle is manual.
Know the Specs
Blade Width And What It Costs You
Width is the number of inches the blade covers in one pass. A 60-inch blade clears a wider strip than a 48-inch blade, so it takes fewer runs on a big driveway. The trade-off is weight and hang: wider steel hangs further off the front of the mower and takes more push to move.
Steel Gauge, In Plain Terms
Gauge measures how thick the steel plate is, and a lower gauge number means thicker steel. A 14-gauge blade is a lighter plate; an 11-gauge blade is a thicker, heavier one. Thicker steel stands up better to ice chunks and gravel edges, but it adds weight to the front of the mower.
Common Questions
Will a zero turn plow fit my mower without drilling new holes?
Is a 60-inch blade better than a 48-inch blade for a zero turn plow?
What does steel gauge mean on a snowplow blade?
Can I angle the blade without getting off the mower?
How much snow can a zero turn plow push?
Does a heavier plow kit hurt my mower’s steering?
What is an adjustable trip spring on a snow blade?
Do these zero turn plows come with everything needed to install?
Are these plow kits made in the USA?
The Bottom Line
For most zero-turn owners, the zero turn plow to start with is the Agri-Fab 60 in Snow Blade, because its seat-side handle lets you angle the blade without leaving the mower. If you want the widest single-pass coverage and thicker 11-gauge steel, reach for the Country Manufacturing 5 ft kit. And when your driveway has tight edges and you want a 48-inch blade, the Country Manufacturing 4 ft kit is the one to grab.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.