Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
The short answer: buy a wheel that states a 6×139.7 bolt pattern and a 78.1 mm center bore, then check the offset before you fall for the finish. Get those three numbers wrong and the rim rubs, wobbles, or will not seat at all.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Below are chrome replicas built to stock specs, a matte-black off-road offset, and a full four-wheel set. The swaps, the weight differences, and the hidden extra costs are all spelled out inside this list of the yukon denali wheels worth your money.
Top Picks



How To Choose The Best Yukon Denali Wheels
A Denali hub runs six lug studs on a 6×139.7 bolt pattern (often written 6×5.5), and the center opening measures 78.1 mm. Those two figures are the gate. A wheel that misses either figure will not bolt on, no matter how good the photo looked.
Bolt pattern first, cosmetically last
The bolt pattern is the stud spacing on your hub. On your Denali that is six holes on a 6×139.7 circle, so a 5-lug or 8-lug rim is simply the wrong part. The center bore is the round hole the hub slides into — 78.1 mm keeps the wheel centered on the hub instead of resting on the studs. Several of the wheels here ship with a hubcentric ring (a thin adapter ring that fills the gap between rim and hub), which does that centering job for you.
Offset and backspacing: the rubbing decision
Offset tells you how far the wheel’s mounting face sits from its centerline, measured in millimeters. Backspacing is the same idea, but measured in inches from the inner lip. A lower positive offset pushes the wheel outward toward the fender. The RockTrix at +12 offset sits further out than the OE replicas at +31, so you get a wider stance and real fender clearance. If you plan a bigger tire, the offset decides if you need a leveling kit or a lift.
What is in the box — and what is not
Nearly every wheel here is sold as a bare rim. Lug nuts, stems, and the TPMS sensors (the small pressure transmitters inside each wheel) are separate purchases on almost every listing. Budget that in before you compare finishes, because four sensors and a set of lugs can quietly add more than a wheel. Some listings say compatible with factory or aftermarket TPMS sensors — that means your existing sensors can usually be swapped over by a tire shop.
Match the tire size to the rim width
Rim diameter and width set the tire you can run. A 20×8.5 takes a different tire than a 22×9, and the OE-spec listings name their reference size for a reason. Going wider than stock without checking backspace is how a tire ends up rubbing the fender liner. If you already have a tire, size the wheel to it rather than the other way around.
Side-by-Side Comparison
| Model | Best For | Size | Offset | Weight | Amazon |
|---|---|---|---|---|---|
| OE Wheels CV85 Chrome★ Best Overall | Stock-spec factory look | 20×8.5 | 31 mm | 38.4 lb | Amazon |
| OE Wheels CV94 ChromeTop Performer | Highest-rated single chrome rim | 20×8.5 | 31 mm | 39.4 lb | Amazon |
| RockTrix RT111 Matte BlackMost Aggressive Fit | Aggressive stance and clearance | 20×9 | +12 mm | 37 lb | Amazon |
| OE Wheels CV92 22″ Honeycomb | 22-inch honeycomb look | 22×9 | 31 mm | 44 lb | Amazon |
| OE Wheels CV74B 22″ Black Machine | Dark 22-inch OE style | 22×9 | 24 mm | — | Amazon |
| Velospinner 20″ (2007–2014) | Exact OEM replacement fit | 20×8.5 | 31 mm | 31 lb | Amazon |
| Velospinner 22″ (2014–2020) | Later-body 22-inch upgrade | 22×9 | — | 41 lb | Amazon |
| OE Wheels CV98B 22″ Chrome | Widest vehicle coverage | 22×9 | — | 51.7 lb | Amazon |
| OE Wheels CV32 Set of 4 | Whole-truck setup in one order | 20×9 | 28 mm | — | Amazon |
Detailed Reviews
1. OE Wheels CV85 20×8.5 Chrome 5304 6×139.7 Rim
Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.
The chrome replica that nails the factory look — and the highest-rated wheel in this whole group at 4.5+ stars across 100+ ratings.
A 20×8.5 chrome rim on the stock 6×139.7 bolt pattern with a 31 mm offset and a 78.1 mm center bore is the closest thing to a direct swap on a stock Denali here. That offset matches the stock figure, so the wheel sits where the factory one did — the tire does not suddenly poke past the fender or tuck inward. Of the nine picks here, this one carries the least fitment risk on a stock Denali.
Chrome done right is what wins people over here. What draws the most attention is appearance, and the recurring theme is that these look like factory Denali wheels rather than aftermarket parts — which is the entire job of a replica. Fit comes right behind it in the same breath: buyers talk about them bolting up and matching perfectly. It weighs 38.4 pounds, so it is a two-hand lift, not a one-hand toss — relevant when you are holding a rim at shoulder height on a jack.
Here is the honest bit. It comes as one bare wheel, with no lug nuts, wheel locks, or TPMS sensors included — those are separate purchases on almost any single rim. That is fine if you are replacing one damaged wheel and can reuse your hardware. It is less fine if you are piecing together a full set on a deadline. The rim is guaranteed to be compatible with factory and aftermarket TPMS sensors, so your existing sensors can be swapped in.
What earns its keep
- 20×8.5 with 31 mm offset and 78.1 mm center bore — matches stock so the tire stays inside the wheel arch
- Chrome finish that reads as factory, not flashy aftermarket
- Aluminum build at 38.4 pounds — a manageable swap on a floor jack
- Compatible with factory and aftermarket TPMS sensors, so your sensors carry over
Where it asks you to plan
- One wheel only — lug nuts, locks, and TPMS sensors are not included
- Chrome shows brake dust and road salt sooner than a painted finish
- Sold as a single unit, so a full set means four separate orders of the same part
Reach for this if: you want a factory-matched chrome wheel that drops on a stock Denali with no offset guesswork.
Plan around this: there is no hardware in the box — sort your lug nuts and sensors before the wheel arrives.
2. OE Wheels CV94 20×8.5 Chrome 5420 6×139.7 Rim
Chrome that fits like it left the factory — and the top-rated pick in this group when you want a proven 20-inch swap.
The CV94 runs the same 20×8.5 size, 31 mm offset, and 6×139.7 pattern as the outgoing CV85 — but it carries the strongest owner score of any single rim here. Buyers’ verdict lands on one word: fit. These are wheels people bolt on and forget, and the same buyers call the finish good quality, which is the pairing that matters on a chrome rim that has to hold up through winters and gravel.
Against the CV85 above, the trade is 39.4 pounds versus 38.4 — a pound heavier on the scale, which is nothing you feel once it is bolted on, but a real difference if you swap wheels seasonally. The offset holds the wheel at 31 mm, so tire and fender relationship stays stock-spec.
Cash the chrome in as a commitment, not an upgrade. Salt and brake dust will dull it faster than a painted finish unless you wash it. And like nearly every single rim on this page, it ships bare — lug nuts, locks, and TPMS sensors are on you. Coverages reaches back to Yukon 1500 1992–2020 and forward to Sierra 1500 1999–2018, so check your model year before ordering.
The build: Aluminum at 39.4 pounds, a 31 mm offset, and a 78.1 mm hub bore — all stock-compatible, which is why buyers report it seated without fuss.
The upkeep: chrome rewards a wash schedule and punishes neglect, so if you live on a salted road, budget the care routine.
Who it beats: anyone comparing a chrome swap wants the best-proven replica in this group, and this is it.
Who should wait: if a bare rim plus separate hardware stretches your plan, price out lugs and sensors before committing.
3. RockTrix RT111 20 inch Wheel, 20×9, +12 Offset, Matte Black
The stance-up wheel for a Denali that lives on gravel — a 20×9 with a +12 offset that pushes out past the fender on purpose.
This is the one wheel here that openly is designed to poke out. The +12 offset is aggressive — the wheel extends past the fenders — and RockTrix says it gives up to 2 inches more inner clearance depending on your stock wheels. That clearance is the whole off-road pitch: more room on the inside means less chance of a tire rubbing the liner on full lock. It ships with a 78mm hubcentric ring, which centers the rim on the hub properly, and one center cap.
Set it against the CV92 honeycomb, the only other 9-inch-wide wheel here. The RockTrix has a 5.5-inch backspace against the CV92’s 6.3 — a backspace that pulls the wheel outward rather than inward, matching that wider stance. That difference is exactly what you feel when you turn the wheel over a curb. Buyers here go hardest on appearance, and quality is right behind it. Matte black hides brake dust better than chrome, which is a quiet daily-use win.
The catch is size planning, not the wheel. It works with 32-inch tires, and some years and models can run 33-inch — but a bigger tire than stock can demand a leveling kit or lift to keep from rubbing. Valve stems are not included, and you may need TPMS valve stems for your sensors. If you want a bolt-on with zero suspension homework, this is not that wheel.
What it does for you
- +12 offset and 5.5-inch backspace push the wheel outward for an aggressive stance
- Up to 2 inches more inner clearance lets a bigger tire fit without rubbing
- 78mm hubcentric ring included, so it centers on the hub correctly
- Matte black holds up visually against brake dust
Read before you order
- Large tires may require a leveling or lift kit to avoid rubbing
- Valve stems and TPMS valve stems are not included
- Tire size must be chosen carefully — 32 inch is the safe figure
Grab it for: a wider, stance-forward Denali build where the wheel is meant to sit past the body line.
Leave it for another day: if you want a no-suspension-change bolt-on, this one is asking for tire homework.
4. Velospinner 20″ Alloy Wheel
A genuine OEM-pattern replacement for the exact years of Denali it names — built to stock specs, including the load rating.
The defining number here is the load index of 1600, printed right on the spec sheet. That is the wheel’s rated load capacity, and it matters when your Denali actually tows or hauls. It is the same spec family as the 22-inch Velospinner below but on a 20×8.5 rim, with 31 mm offset, 6×139.7 pattern, and a 78.1 mm center bore — the stock fitment set.
What owners keep coming back to is fit, with quality right behind it. The listing is explicit: it is new, not refurbished, welded, or repaired, and it is engineered to OEM specs for direct fit. It is also fully compatible with original equipment including TPMS sensors, lug nuts, valve stems, wheel covers, and winter tires — a rare listing that spells out what it accepts. The reference tire size given is LT275/55R20.
Weighing in at 31 pounds, it is the lightest 20-inch wheel in this group — against the CV92 22-inch at 44 pounds, that is a noticeable difference to lift and mount. The honest limit is year coverage: it names Sierra 1500 2007–2013, Sierra Denali, and Yukon / Yukon XL 1500 2007–2014, so it is a precise replacement, not a universal one. Tires, sensors, lugs, and covers are separate.
The spec that counts: a 1600 load index and full OEM compatibility give it real workhorse standing, not just cosmetic standing.
The small-print: it fits a defined set of model years only, so confirm your year before you order.
Best match for: a 2007–2014 Denali owner replacing a damaged rim with something that behaves exactly like the original.
Wrong pick if: your truck falls outside those model years — this rim names its range for a reason.
5. OE Wheels CV92 22 Inch Rim
Big, bold, and honeycomb-styled — the 22-inch that looks like it rolled off the lot with it.
There is a distinct jump in presence between a 20-inch rim and this — the CV85 above measures 20 inches, this one 22, and the honeycomb face sits wider at 9 inches. That 22×9 footprint with a 31 mm offset and 6.3-inch backspace is a lot of wheel to show off, and black with a machined face is the look that gets the second glance in a parking lot.
Two things buyers notice: they look right, and they are built well. Quality edges appearance here, but both draw steady praise — the design mimics a factory honeycomb wheel, which is the point. It is rated to a 1000 load index, giving it real load headroom.
It is a 44-pound rim, the heaviest of the single wheels here, so plan a helper for a mount. It also fits a long list of years across Yukon 1500 1992–2020 and Sierra 1500 1999–2018, but verify yours before ordering. Lug nuts, bolts, locks, and TPMS sensors are not included — the listing is clear on that one.
Pick this for: the truck that wants a big, structured 22-inch face and a stance that matches the honeycomb look.
Consider the weight: the heaviest single wheel in this group at 44 pounds — have a second set of hands ready on install day.
6. OE Wheels CV74B 22×9 Black Machined 6×139.7 Rim
A 22-inch black machine-finish wheel with a slightly wider offset than the honeycomb above — and a slightly different stance because of it.
The one number that separates this from the CV92 above is offset: the CV74B sits at 24 mm against the CV92’s 31 mm, so this one pushes the wheel a touch further outward. It shares the 22×9 size and 6×139.7 pattern, so it drops onto the same Denali hub set, but where the CV92’s tread tucks toward the body, this one gives it a bit more breathing room to the fender.
Black machined means a dark face with machined accents, and it pairs with the honeycomb-look finish theme the rest of this family uses. The fitment list mirrors the other OE Wheels here, running from Yukon 1500 and Sierra 1500 back through the older full-size trucks. It is also compatible with TPMS sensors, and the listing notes the lug nuts, bolts, locks, and sensors are not in the box.
This one is a fair choice when you have looked at the CV92 and wanted the same big wheel with the stance pushed a little. There is no weight figure printed on the listing, so treat the scale as unknown until it arrives. If you already have your sensors and lugs on hand, you avoid the usual extra trip.
The offset difference: 24 mm versus the honeycomb 22-inch’s 31 mm gives it a slightly wider stance out by the fender.
What is not stated: the listing omits weight and detailed offset figures beyond what is printed — confirm anything you need before ordering.
Worth choosing if: you want a dark 22-inch machine finish with a little more outward stance than the honeycomb.
Look elsewhere if: you need to know exact weight and every dimensional figure up front — this one leaves that blank.
7. Velospinner 22″ Alloy Wheel
For the later-body trucks: a 22-inch seven-spoke upgrade that lines up with 2014–2020 model years.
The fitment list is where you should start. This wheel names Escalade 2015–2020, Sierra 1500 2014–2019, Silverado / Suburban 1500 2015–2019, and Yukon / Tahoe 2015–2020 — all as 22×9 seven-spoke with the option codes called out. It runs the 6×139.7 pattern, holds a 1600 load index, takes a 285/45R22 tire by the reference size, and finishes in hyper black with chrome inserts.
That 1600 load index is the number that earns it a place — the same figure the Velospinner 20-incher carries, which is a reassuring spec to see on a 22-inch upgrade. It is a seven-spoke face, so it reads cleaner and more open than the honeycomb. It comes as one wheel, and tires, sensors, lugs, and stems are separate.
At 41 pounds it is heavy enough to want two hands and a helper, but it is the lighter of the two 22-inch Velospinner-and-OE options here against the CV98B’s 51.7 pounds. The real consideration is the model-year lock: this is a fit for a defined window of later-body trucks, so a 2003 Denali is outside its reach.
Why the later-body buyer picks it
- Fitment mapped to 2014–2020 trucks with the option codes spelled out
- 1600 load index — real carrying capacity, not just a cosmetic 22
- 7-spoke hyper black with chrome inserts for a more open face
- 285/45R22 reference tire size removes guesswork
What to keep in mind
- Model-year specific — older Denalis fall outside the listed range
- One wheel only; hardware and sensors sold separately
- 41 pounds asks for a helper on install day
Made for: a 2014–2020 body Denali that wants a clean seven-spoke 22 without straying from stock tire spec.
Not for you: if your truck predates 2014, the fitment list stops short of your year.
8. OE Wheels CV98B 22×9 Chrome Replica Wheel
A 22-inch chrome replica that fits more model years than anything else here — and quality is the word that carries it.
Look at the coverage list before the finish. This 22×9 chrome wheel names Yukon 1500 through 1992–2023, Sierra 1500 1999–2023, Silverado 1500 through 2023, Escalade 1999–2023, and even QX80 through 2023 — a span that swallows almost any Denali year you could own. Center cap included, and the original cap interchanges, so you keep your factory badge if you want it. It seats with a 60° conical seat, which is the standard taper that mates with factory-style lug nuts.
Build quality is the reason it holds the description, and appearance follows. The finish is chrome, and the review pages sum it up as replica wheels that match the factory look — which is what you are paying for at this size. It is a chrome finish that will appreciate a wash routine if you drive through salt country.
The weight is the one honest trade: 51.7 pounds, the heaviest single wheel in this group, roughly ten pounds over the Velospinner 22. That is a two-person mount. And there is no bolt pattern number printed as 6 in the spec table besides the six-hole count, so if you have any doubt about whether it fits your truck, size check against the model-year list first.
The coverage win: up through 2023 on Yukon and Sierra 1500 makes it the broadest-fitting 22 here, and the center cap interchange keeps the factory look.
The weight toll: 51.7 pounds is the heavy end of this group — plan for a helper and a stable jack.
Made for: a Denali owner who wants a clear factory-match chrome 22 and needs the widest year range on the page.
Weigh it first: the heaviest rim here means a two-person job on install day.
9. OE Wheels CV32 20×9 Set of 4 Gloss Black 6×139.7 Rims
Four matched gloss black 20-inch rims in one box — the matchy-matchy route without four separate orders.
Matching rims one at a time is how finishes end up slightly off. Here four 20×9 wheels arrive from the same run in the same gloss black, on the 6×139.7 pattern with a 28 mm offset. That 28 mm is the figure worth noting: it sits between the CV92’s 31 mm and the CV74B’s 24 mm, so it lands in a middle stance, near-stock but not identical to either.
Quality is what owners grip onto here, and appearance runs close behind. Factory coverage runs all the way to 2026 on Yukon 1500 and Sierra 1500, so this set carries the newest truck years in the group. Load index is 105, and the four-wheel total is 176 pounds — a delivery-day reality of several manageable boxes rather than one giant crate.
Gloss black is the low-maintenance finish of the group: no chrome to haze and minimal polish to chase. Lug nuts, locks, and TPMS sensors are not included for any of the four, so factor that into the plan. And because you get all four together, this is the single order for a full refresh rather than a spare-wheel replacement.
What a full set gets you
- Four matched 20×9 rims in one order, so the finish lines up across all corners
- Coverage through 2026 on Yukon and Sierra 1500 — the newest years here
- 28 mm offset sits in a near-stock middle stance
- Gloss black avoids chrome upkeep
What to have ready
- Lug nuts, locks, and TPMS sensors are not included for all four corners
- Full set means four mountings and four tire swaps
- 176 pounds arrives across multiple packages — plan delivery day
The right call if: you are doing a complete wheel refresh and want all four corners to match exactly.
Hold if: you only need one spare — a single rim from this group does that job without the four-wheel commitment.
Know the Specs
Bolt Pattern and Center Bore
The bolt pattern is the stud spacing on your hub, written as the number of holes times the circle diameter — 6×139.7 means six holes on a 6-inch-and-139.7-mm circle. The center bore is the hole that the hub slips into; 78.1 mm is the Denali figure, so a matching rim sits hub-centered rather than hanging on the studs. A hubcentric ring, which some wheels include, fills the gap if the bore is different from the hub.
Offset and Backspacing
Offset is measured in millimeters from the wheel’s centerline to the mounting face, and backspacing is the same distance in inches from the inner edge. A lower positive offset pushes the wheel outward toward the fender; a higher backspace pulls it inward. The RockTrix at +12 pushes outward past the fenders, while the OE replicas at +31 keep the tire near stock. This single number decides whether a wide tire clears or rubs.
Load Index
Load index is the wheel’s rated carrying capacity, printed on the spec sheet. A higher figure gives you headroom when the truck is loaded or towing — several picks here list 1600, others list 1000 or 105. Check it against how you actually use the truck, not just how it looks in the driveway.
TPMS and Hardware
TPMS sensors are the small pressure transmitters that live inside each wheel, and nearly every wheel here ships without them. Listings that say TPMS compatible mean your factory sensors can usually be swapped over by a tire shop. Lug nuts, wheel locks, and valve stems are typically sold separately too, so price them in before comparing finishes.
Common Questions
Will a 6×139.7 wheel fit my GMC Yukon Denali?
Do these wheels come with lug nuts and TPMS sensors?
Will a 22-inch wheel fit on a stock Denali without a lift?
What is the difference between offset and backspace?
Can I put my factory TPMS sensors into these wheels?
Do I need a hubcentric ring for these wheels?
What tire size works with a 20×9 or 22×9 rim?
Is chrome or black better for durability?
Should I buy a single rim or a set of four?
How do I know these fit the newest Denali years?
The Bottom Line
For most Denali owners, the yukon denali wheels winner is the OE Wheels CV85 Chrome. Its 20×8.5 size, 31 mm offset, and 78.1 mm bore match stock with the least guesswork, so you avoid fitment surprises. Buyers back it with a 4.5+ star score across 100+ ratings. If you want the strongest owner-proven finish in this group, the OE Wheels CV94 Chrome leads on that count. And when you want the aggressive off-road stance with more inner clearance, reach for the RockTrix RT111.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





