Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A plain five-gallon bucket swallows everything you drop in it. Your pliers, your shells, your phone and your lunch all end up in one deep hole, and you spend half the trip digging. The right accessories turn that bucket into a rig with a pocket for each job; this guide covers the pieces that fit the YETI LoadOut and what each one adds.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You will see which add-on earns its place, which one blocks another, and which fits only the LoadOut. Here is the straight read on the yeti loadout bucket accessories worth bolting on before your next trip out.
Top Picks


How To Choose The Best Yeti Loadout Bucket Accessories
Start with the bucket you already own. The LoadOut is not a standard five-gallon pail, so an accessory built for a generic bucket can fit loosely or not at all. Every add-on here is made for the LoadOut shape or for a standard five-gallon bucket, and mixing the two is the first mistake to avoid.
Match the mount before you match the colour
The LoadOut has dedicated mounting holes along its rim. A gear belt wraps the outside and hangs pockets; a seat drops over the top; a rod holder bolts into those holes. Check how each piece attaches, because two items that both need the rim will not share it.
Decide what the bucket is for
A bucket that carries tackle wants pockets and a rod holder. A bucket you sit on at a dove hunt wants a padded lid. A bucket doubling as a boat trash can wants a mesh cover that keeps paper from lifting out in the wind. Decide the job first, then buy the accessory that does it.
Read the fit notes on rods and can holders
Rod holders state a rod opening in inches, and a base wider than that will not seat. Drink holders are built around a set can size and often will not grip a foam sleeve. Both limits are printed in the listing, and both are why these accessories get returned.
Side-by-Side Comparison
| Model | Best For | Type | Material | Weight | Amazon |
|---|---|---|---|---|---|
| YETI LoadOut Utility Gear Belt★ Best Overall | Rigging the outside of the bucket | Gear belt with 4 pockets | Mesh | 1.5 pounds | Amazon |
| GALVANOX 2-Pack Mesh LidsBest for Boats | Boat trash and bait cover | Mesh bucket lid, 2-pack | Nylon | — | Amazon |
| Tideline3D Drink and Phone Holder | Drink and phone within reach | Mount with 2 can slots | Plastic | 0.35 kg | Amazon |
| Ironraw 5 Gallon Bucket Seat | Low-cost seated work | Swivel seat lid | Foam/Polyester/Plastic | 0.78 kg | Amazon |
| Tideline3D Fishing Rod Holder | Rods and tools on the bucket | Rod holder mount | UV-resistant plastic | — | Amazon |
| YETI LoadOut Swivel Seat | Long sits at camp | Swivel seat lid | Plastic frame, foam fill | — | Amazon |
Detailed Reviews
1. YETI LoadOut Utility Gear Belt Accessory
Our pick — 4.5+★ from 600+ verified ratings; the strongest balance of quality and price.
Four pockets of mesh wrap the bucket, so nothing small ends up lost at the bottom.
The way a gear belt changes a LoadOut is simple: your tools ride on the outside where your hand already is. YETI builds this one with four pockets — two open and two with flaps — in a mesh material that drains and dries instead of holding water against your gear. It weighs 1.5 pounds, which is light enough that you will not notice it on a full bucket.
What earns this the top spot is the Hitch Point Grid. That is a woven webbing panel laid out in the same pattern as MOLLE gear (the rows of nylon straps military packs use to clip on pouches). So any MOLLE pouch or clip you already own hangs straight on, and your bucket becomes a mounting surface instead of a container.
What wins people over is how solid it feels — the build quality dominates the feedback on this belt, and it shows in the stitching and the way the pockets hold their shape. The honest catch sits in the pockets themselves. They are sized for pliers, shells, a tape measure and smaller tackle, and a bulky item simply will not drop in. Think of it as a tool belt rather than a storage bin.
One practical note: the bucket is sold separately, so this is an add-on for a LoadOut you already own. And because it wraps the rim, check that a seat lid you plan to use still closes cleanly over it.
Where it earns its keep
- Four mesh pockets put pliers, shells and small tackle within reach.
- Hitch Point Grid webbing takes any MOLLE accessory you already carry.
- 1.5 pounds adds almost nothing to a loaded bucket.
- Ten colour options, from Charcoal to King Crab Orange.
The honest limits
- Pockets are sized for small gear; bulky items will not fit.
- Bucket is not included.
- Needs checking against a seat lid you plan to add later.
Reach for this if: you want tools on the outside and you already own MOLLE pouches to hang on it.
Look elsewhere if: your plan is to carry large, chunky items — a deeper pocket system or the bucket itself suits that better.
2. GALVANOX 2-Pack Mesh Lids for 5 Gallon Bucket
A mesh top that holds trash in when the boat is moving and folds flat when it is not.
Two lids arrive in one pack here, against the single-count drink holder further down the list — twice the covers for one bucket-and-spare setup. The mesh is heavy-duty marine-grade nylon (a woven fabric rated by the maker for saltwater and wind), which is the right material for a cover that lives outdoors.
The job it does is narrow and it does it well. Stretch it over a five-gallon bucket and loose paper, wrappers and bait scraps stop lifting out at speed. The listing’s own claim is that it keeps contents from spilling or blowing away, and it folds flat for storage between trips. It fits standard five-gallon buckets, and it is listed as compatible with YETI LoadOut buckets.
Quality is the thing owners talk about most with this cover, and the fit on Yeti buckets gets called out as well. The trade-off is that it is a cover, not a seat — there is no padding and no structure, so do not plan to sit on it. It also breathes through mesh, which means fine debris can still find its way in; this is a wind and splash guard, not a sealed lid.
The two-pack is the argument: one lid on the boat bucket, one on the garage bucket, no hunting for a cover.
Why it makes the cut: marine-grade nylon mesh, a two-pack count, and a flat fold for storage — the practical answer for a bucket that doubles as a trash can on the water.
What to know going in: it is a breathable cover with no seat function, so pair it with a proper padded lid if you also want somewhere to sit.
The right call for: boat owners and campers who want trash and bait contained without a rigid lid to store.
Not the one for: anyone expecting a sealed, sit-on cover.
3. Tideline3D Drink and Phone Holder
Two cans, a phone and your keys, all clipped to the rim instead of rolling in the dirt.
You carry a bucket with one hand, so weight counts. This mount weighs 0.35 kg; the Ironraw swivel seat weighs 0.78 kg.
The layout is the appeal. Two slots take YETI Colster-style can holders, a middle slot holds a phone, keys or a small tool, and the plastic is UV resistant for long days in the sun. The hardware is stainless steel, which is the right call near water because it resists corrosion. Up to four items can hang on the bucket at once.
Here is the limit you need before you order: the can slots are shaped for Colster-style holders and will not grip a foam coozie. That is a fit mismatch, not a fault — if you drink from a soft sleeve, this is not your holder. The other one to know is that it does not work alongside the Gear Belt accessory, so you are choosing between the belt’s pockets and this drink-and-phone rig on the same bucket.
For a solo fishing trip or a tailgate where your phone needs to stay off the ground and your can needs to stay upright, this is the smallest accessory here that solves both at once.
Small footprint, real utility: 0.35 kg of UV-resistant plastic and stainless hardware that carries a drink, a phone and keys without eating bucket space.
The compatibility catch: built for Colster-style holders only, and it will not share the bucket with the Gear Belt.
Pick it when: your phone and drink need a home and you travel light.
Think twice if: you already run the Gear Belt, or you drink from a foam coozie.
4. Ironraw 5 Gallon Bucket Seat for Yeti Bucket Only
A padded, spinning lid for anyone who would rather not sit in the dirt all afternoon.
The cushion is EVA memory foam (a firm foam that springs back after you stand up) under a waterproof liner, and the seat measures 2.16 inches tall and 13.4 inches wide. The waterproof liner is the part that matters for hunting and fishing — a wet seat is a cold sit.
Underneath, it spins a full 360 degrees and, by the maker’s description, does it quietly. A handle on the edge lets you lift the seat off when the bucket is sealed tight, which is the small detail that stops you fighting your own lid. It weighs 0.78 kg, more than double the Tideline3D drink holder’s 0.35 kg, so it is the piece you feel on the carry.
Fit is what people like most about this seat, and the padding is what they mention next. The mixed feedback is on the lid side and long-term durability, which is fair for a foam cushion that lives outdoors. Treat the swivel and foam as wear items; the cushion softens over seasons of outdoor use.
The seat height of 2.16 inches keeps you low, which is exactly what you want for a bucket seat beside a blind or a garden bed. It fits Yeti buckets only, so do not plan to move it onto a plain hardware-store pail.
The appeal on paper
- EVA memory foam under a waterproof liner.
- Full 360-degree swivel with a quiet spin.
- Edge handle for lifting the lid off a tight bucket.
- Sits 2.16 inches high and 13.4 inches wide.
What to weigh up
- 0.78 kg is the heaviest add-on in this group.
- Lid sealing and durability draw mixed comments.
- Fits Yeti buckets only, not standard pails.
A sensible buy for: dove hunters and gardeners who want a padded seat without paying the brand-name price.
The caveat to accept: foam and swivel will wear over time, so treat this as a seat you replace eventually rather than one you pass down.
5. Tideline3D Fishing Rod Holder
Two rods, two knives and pliers, all bolted to the mounting holes you already have.
You get two rod holders, two knife holders, one plier holder, a multi-purpose hole and eight small holes for odds and ends. It is cut to land on the LoadOut’s own mounting holes, so it sits where the bucket was designed to take it.
The rod opening is 1.25 inches, and that number is the whole buying decision. Spinning and casting rod bases sit down into it; larger surf-fishing style rods will not, and the listing says so plainly. Measure the base of your heaviest rod before you order — this is the one spec that turns a return into a keeper.
The plastic is UV and heat resistant for long days in the sun, and the hardware is stainless steel to keep corrosion off near saltwater. Build quality is the strength here. Value is the dividing line: some anglers feel it is a lot for a plastic mount, and that mixed read is worth knowing before you commit.
For a bucket that carries your tackle and holds your rods while you rig up, this mounts both jobs in one place. It fits the YETI LoadOut only, so it is not going on a generic pail.
Where the value sits: two rod holders plus knife and plier holders from one mount, in UV-resistant plastic with stainless hardware.
The one limit that decides it: a 1.25-inch opening means larger surf-style rod bases will not seat.
Worth it for: LoadOut owners who run spinning or casting rods and want tackle and tools on the same bucket.
skip it if: your rods have wide surf-style bases, or you are not sold on the cost for a plastic mount.
6. YETI 5 Gallon LoadOut Bucket 360-Degree Swivel Seat
YETI’s own seat, built to seal the bucket and spin on nylon gliders.
The headline here is the seal. YETI fits this lid with a weather-resistant seal that keeps whatever is stashed inside safe from the elements — the one thing a plain cushion cannot do. Set it on the LoadOut and the bucket becomes a dry box with a chair on top.
The cushion is waterproof, heavy-duty foam, and the spin runs on wear-resistant nylon gliders (smooth plastic bearing pads) rather than metal, which is why YETI calls it a quiet swivel. There is a hook on the side, so the seat hangs off the bucket when you need both hands to get at your gear. It is built for adults and sits roughly 10 to 12 inches deep across the top.
Construction and durability are what carry this seat in the field — it is the piece that survives season after season at a hunting camp and still does duty at a ball game. The one honest note is the swivel: a share of users find it takes real effort to rotate, especially with weight on it. It turns, but it is not a lazy-Susan spin.
Set against the Ironraw seat, this is the one that also seals the bucket, which is the reason it costs more. If the bucket needs to keep gear dry as well as give you a place to sit, the seal is the deciding feature.
Why YETI’s own seat leads
- Weather-resistant seal keeps stashed gear dry.
- Waterproof heavy-duty foam holds up outdoors.
- Wear-resistant nylon gliders for a quieter spin.
- Side hook lets the seat hang off the bucket.
Where it asks patience
- The swivel can take effort to rotate with weight on it.
- Priced as a premium add-on.
- Value draws a split reaction among owners.
The premium answer: hunters and campers who want a seat that also seals the bucket against rain.
Only hesitation: if you expect a free-spinning seat, this one asks you to lean into the turn.
Know the Specs
Rod opening size
The rod holder lists a 1.25-inch opening. That is the inside width the rod base drops into, so a base wider than that will not seat. Spinning and casting rods tend to fit; larger surf-style rods often do not, which is why the listing flags them. Measure your heaviest rod base before ordering.
Weight in kg and pounds
Add-ons list weight in either kilograms or pounds, and both matter when you carry a loaded bucket by the handle. The drink holder sits at 0.35 kg, the Ironraw seat at 0.78 kg, and the YETI gear belt at 1.5 pounds. Every ounce you add is weight in the one hand carrying the bucket.
Mounting holes and MOLLE webbing
The LoadOut has dedicated mounting holes along its rim, and accessories either bolt into them or wrap the outside. MOLLE webbing is a grid of nylon straps that takes clip-on pouches. A gear belt with that grid turns the bucket into a mounting surface; a bolt-on holder uses the holes directly.
Seat swivel and seal
A swivel seat turns 360 degrees so you can face a blind, a rod or a workbench without standing up. Nylon gliders are the smooth plastic pads the spin runs on. A weather-resistant seal on the lid keeps rain and splash out of the bucket. Not every seat has both a swivel and a seal, so check which one you need.
Common Questions
Will these accessories fit a standard five-gallon bucket or only the YETI LoadOut?
Can I use the Gear Belt and the drink and phone holder on the same bucket?
Will the rod holder take a surf fishing rod?
Does the drink holder fit foam can coozies?
What is the difference between the Ironraw seat and the YETI swivel seat?
Will a mesh lid keep rain out of the bucket?
How much weight does each accessory add to the bucket?
Do the rod holder and the seats work together on one bucket?
Are these accessories worth adding if I already have a plain bucket?
How do I keep metal parts from rusting near saltwater?
The Bottom Line
For most people rigging a LoadOut, the winner is the YETI LoadOut Utility Gear Belt. It puts four pockets and a MOLLE grid on the outside, so your tools sit where your hand is instead of at the bottom of the bucket. Want a seat that also seals the bucket against rain? Grab the YETI LoadOut Swivel Seat. And for a boat bucket that doubles as a trash can, reach for the GALVANOX Mesh Lids — light, marine-grade nylon, two to a pack, so one lives on the boat and one in the garage.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.



