Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your Yamaha TTR125 part only works if it physically bolts onto your exact model year. The TTR125 has been built in E, L, and LE trim (three versions of the same bike) across more than two decades. A filter, intake boot, or piston kit that fits a 2003 can miss a 2005 completely. This guide sorts nine real TTR125 parts by what they actually fix, so you can match the part to your bike instead of guessing from a listing title.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
If your TTR is due for a refresh, confirm your model year and OEM number (the manufacturer’s original part number) first, then buy. These are the selections worth your time when you shop for yamaha ttr125 parts.
Top Picks



How To Choose The Best Yamaha TTR125 Parts
The part that ruins a repair is almost never a bad design — it is the wrong fit. A TTR125 from 2001 and one from 2011 can take different intake boots, different filters, and different pistons. Confirm your year and trim before you spend a cent, and every other decision gets easier.
Start with your model year and trim
Yamaha sold the TTR125 in E, L, and LE versions, and the years have gaps. One listing here covers the TTR125 from 2000 to 2003, the TTR125E from 2003 to 2009, the TTR125L from 2000 to 2008, and the TTR125LE from 2003 to 2023. That is why you see so many different year ranges stamped on parts that look interchangeable. Read the exact range on the listing and hold it against your bike’s year and trim.
Use the OEM number as your cross-check
The OEM number is Yamaha’s own part code for the piece, printed like 5HP-14450-00-00. A good listing prints the OEM number it replaces, sometimes more than one. When the seller’s OEM code matches the code on your old part or in your service manual, you have your strongest fit signal. When a listing has no OEM number at all, treat that as a warning.
Match the part to the job you are doing
A clogged filter and a slipping clutch are different repairs with different parts. Bolt-on jobs like a filter, intake boot, or fuel valve take minutes. A carburetor swap or a clutch kit means opening things up. A top end rebuild with a piston and cylinder is real engine work. Decide how deep you want to go before you buy, because the part follows the job.
Weigh warranty and included hardware
Some parts here carry a 365-day warranty and others cover you for 90 days, so the protection is not uniform. Kits that ship with gaskets, clamps, and screws save you a second order mid-repair. A bolt kit with 120 pieces also means you stop hunting for a missing fastener on a Sunday afternoon.
Side-by-Side Comparison
Every row below is a real TTR125 part. The three spec columns stay the same across the table so you can scan fit range, weight, and warranty side by side.
| Model | Best For | Fit Range | Weight | Warranty | Amazon |
|---|---|---|---|---|---|
| MOTO1988 Air Filter & Spark Plug★ Best Overall | Routine tune-up | TTR125 2000-2003, TTR125E 2003-2009, TTR125L 2000-2008, TTR125LE 2003-2023 | — | 365 Days | Amazon |
| BRGMAX Intake Boot JointBest Little Fix | Cracked intake boot | TTR-125, TTR125, TTR125LE, TT-R125L 2005-2020 | — | — | Amazon |
| MOTO1988 Fuel Valve Petcock 8mm KitMost Complete Kit | Leaking fuel valve | TTR125 2000-2009, TTR125LE 2011-2023 | — | 90 days | Amazon |
| LIYYOO Carburetor & Petcock Kit | Carb replacement | TTR125 2000-2003, TTR125E 2003-2007, TTR125L 2000-2007, TTR125LE 2003-2007 | — | — | Amazon |
| Outlaw Racing ORC230 Clutch Kit | Clutch overhaul | TT-R125/L 2000-2015 | 14.4 ounces | — | Amazon |
| FTRT Pivot Brake Clutch Levers | Lever upgrade | TTR125 L LE LW 00-18 | 7.68 ounces | 1 year | Amazon |
| M MATI Front Disc Brake Caliper | Brake repair | TTR125 2000-2023 | 1.39 pounds | — | Amazon |
| Specbolt 120pc Fastener Kit | Shop restock | TTR50 through TTR600, 1995-current | — | — | Amazon |
| FLYPIG 54mm Top End Rebuild Kit | Engine top end | TTR125 2000-2003, TTR125E 2003-2004 | 3.72 pounds | — | Amazon |
Detailed Reviews
1. MOTO1988 Air Filter Element Assembly & Spark Plug
Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.
One box gets your TTR breathing clean again — filter element and spark plug together.
This is the part most TTR125 owners reach for first because it solves the two most common tune-up jobs at once. You get one air filter element and one spark plug, and the filter carries Yamaha’s OEM number 5HP-14450-00-00. The fit range is the widest in this group: TTR125 2000-2003, TTR125E 2003-2009, TTR125L 2000-2008, and TTR125LE 2003-2023. The included housing means the whole assembly drops into your airbox instead of you fitting a bare element onto the old frame.
What wins people over is the fit. The dirt-bike crowd treats a filter as a consumable, so a clean drop-in that seals right is the whole game, and owners consistently report exactly that on their TTR125s, with the 2011 model called out by name. The second payoff is the breathing. Owners describe better idling and easier revving after the swap, which is what you want when the old filter was choked with dust.
The trade-off is the one you would expect from a consumable: it is a stock-style replacement, not a performance intake, so do not expect it to change the bike’s character. Remember that 2004-and-up TTR125 buyers should double-check their own trim against the year list, since the plain TTR125 range stops at 2003. For a part you will replace again down the road, the 365-day warranty is the longest of the fuel-and-air pieces here — versus the petcock kit’s 90 days.
What earns it the top spot
- Two tune-up parts — filter element and spark plug — in a single order
- Widest year coverage in this group, spanning TTR125, E, L, and LE
- 365-day warranty outlasts the 90-day coverage on the fuel valve kit
- Comes with the housing, so it seats into the airbox cleanly
Where it asks you to double-check
- Stock-style filter, not a performance upgrade
- Plain TTR125 year range tops out at 2003, so later bikes must verify trim
The smart first buy: a TTR125 owner due for a filter and plug who wants both in one shot.
Verify first: if your bike is a 2004-or-later plain TTR125, confirm the trim against the year list before ordering.
2. BRGMAX Air Box to Carburetor Intake Boot Joint
The small rubber joint that quietly ruins your idle when it cracks.
A cracked intake boot is one of the sneakiest problems on a TTR125. It lets unmetered air into the engine and you chase the rough running as if it were a carb issue. This BRGMAX joint sits between the air box and the carburetor, and it is a straight rubber replacement for OEM 5HP-14453-00-00. It covers TTR-125, TTR125, TTR125LE, and TT-R125L from 2005 to 2020, so it is the one part here aimed at the later bikes.
The rubber material is the whole point — flexible enough to seal against both the air box and the carb throat without cracking under engine vibration. Owner feedback centers on exactly the two things that matter: it functions properly and the quality holds up. Nobody is buying an intake boot for style, so a joint that seals and stays sealed is the entire job.
The catch is coverage. If your TTR125 is older than 2005, this boot is not your part, and the fit list is narrower than the filter assembly above. It also ships as a single joint with no clamps in the box, so plan on reusing your existing hardware. Think of it as one precise piece for one precise year range rather than a universal fix. Know your year and this is a tidy, low-cost repair that solves a frustrating idle.
One-job specialist: a rubber joint matched to OEM 5HP-14453-00-00 that fixes the leak between air box and carb on 2005-2020 bikes.
Fit gate: only for 2005-2020 models, and you supply your own clamps.
Reach for this if: your 2005-2020 TTR is running rough from a split intake boot.
Look elsewhere if: your bike predates 2005 or you need the filter element itself — grab the filter assembly instead.
3. MOTO1988 Fuel Valve Petcock 8mm Kit
Stop the drip and get every gasket you need in the same bag.
A weeping fuel valve turns into a garage smell fast, and this MOTO1988 petcock kit is built to end it in one sitting. The inlet measures 8mm, and the kit ships with the petcock, fuel tubing, a petrol filter, two clamps, two gaskets, and two screws. That means you are not running back out for a missing gasket halfway through. It replaces OEM 3FY-24500-01-00 and cross-references 23F-24500-20-00 and 1C6-24500-10-00.
The fit list is broad for a fuel part: TTR125 2000-2009 and TTR125LE 2011-2023, plus it also lists the PW80, TTR230, TW200, and XT350. The body is plastic with a chrome exterior finish, and the threaded connector makes for a straightforward swap. For a weekend wrench session, having the filter and clamps in the box is the difference between a one-hour job and a two-trip job.
The honest note is warranty. This kit carries 90 days, while the filter assembly covers a full 365 — a wide gap on paper. Treat it as a wear part and check the connections after the first few rides. The vinyl fuel tubing in the kit is a nice touch, but you will want to route it carefully. For a low-cost part that ends a fuel drip and hands you the small hardware with it, this is a sensible call.
Everything in the bag: petcock, tubing, filter, clamps, gaskets, and screws so the whole job completes in one pass.
Plan for it: the 90-day warranty is the shortest fuel-and-air coverage here.
Good match for: anyone chasing a fuel leak who wants all the small parts included.
Think twice if: you want long warranty cover or your bike falls outside the listed year ranges.
4. LIYYOO TTR125 Carburetor and Fuel Petcock Kit
A whole new carb and shut-off valve for the owner who wants to stop rebuilding.
When your old carburetor is gummed past saving, a fresh unit beats another rebuild. This LIYYOO kit pairs a carburetor with a fuel petcock for TTR125 2000-2003, TTR125E 2003-2007, TTR125L 2000-2007, and TTR125LE 2003-2007. The intake diameter is 25mm, the outer intake diameter is 36mm, and the outer diameter to the air filter is 40mm — the three numbers you check against your existing setup. It arrives preadjusted and bolts straight on with no setting changes.
The fit is what buyers notice most. It drops in cleanly and runs without the tuning dance that drives carb swaps crazy. That said, the idle side draws mixed reports, with some owners chasing a high idle that needs dialing back. Treat that as a setup step rather than a defect — a carb often needs a small adjustment to settle into a new bike. Durability and float behavior also split opinion, so keep an eye on the float level in the first weeks.
The real value is bundled convenience. Buying the carb and petcock as one kit means you address the fuel path in one order, and the price lands in the mid-range bracket. If your original carb is beyond a simple clean, this combo solves two problems at once. Expect to spend a little time fine-tuning the idle once it is on the bike.
Why it earns a bench spot
- Carb and petcock shipped together to fix the whole fuel path
- Comes preadjusted, so it bolts on with no jetting session
- Clear 25mm intake, 36mm outer intake, and 40mm air filter diameters
- Fits TTR125, E, L, and LE across the early-to-mid 2000s
The honest fine print
- Idle can run high from the start and need adjustment
- Some buyers report float and long-term durability concerns
Best for: a rider whose stock carb is past cleaning and who wants the petcock sorted too.
Heads-up: expect to tweak the idle and keep an eye on the float, and confirm your bike is in the 2000-2007 window.
5. Outlaw Racing ORC230 Complete Clutch Kit
A full clutch stack in one box, springs included, for a slipping TTR.
While the filter and carb fixes live under the seat, this one lives inside the case — but it is still a complete, drop-in kit. The Outlaw Racing ORC230 bundles a full set of friction separator plates and springs, with steel plates that resist warping better than worn stock plates. The springs are rated up to 20% stronger than most OEM springs, giving a firmer lever feel and less slip under load. It fits TTR125 and TTR125L from 2000 to 2015, and the whole kit weighs 14.4 ounces on the scale.
The weight tells you what you are getting. This clutch kit is substantial compared to the 7.68-ounce lever set later in this guide, which makes sense given the steel plates and springs in the box. Owners praise that it simply works: the friction plates deliver the smooth power delivery Outlaw markets, and the kit beats the stock unit for a number of riders.
The honest catch is durability and value, both of which split opinion. Some owners mention a friction disc failing early, and a few question whether the outlay matches the lifespan. Size your expectations around a wear item that you will replace again eventually. For a rider facing a slipping clutch who wants springs included, this is a tidy, complete kit that covers the whole job in one order.
The full stack: steel and fiber plates plus springs in one box, with springs rated up to 20% stronger than most OEM units.
Weigh the durability: friction-disc life draws mixed reports, so treat it as a wear part.
Reach for it when: your clutch slips and you want a complete plate-and-spring kit for a 2000-2015 TTR.
Look elsewhere if: you want the longest possible plate life and would rather shop a different brand of friction disc.
6. FTRT Pivot Dirt Bike Brake Clutch Levers
The first touch you upgrade — machined levers that feel far dearer than they are.
Levers are the one part your hands touch every single ride, so swapping the stock set changes how the bike feels immediately. These FTRT levers are milled from 6061-T6 aluminum by CNC, which is a grade of aluminum known for strength at low weight, and the pair weighs just 7.68 ounces. The hand orientation is ambidextrous, and the set includes one brake lever and one clutch lever. They fit the TTR125 L, LE, and LW from 00-18, along with a long list of other Yamaha models.
The finish is where these stand out. Anodizing forms a protective film that resists oxidation, and the bolt is 304 stainless steel, so the levers are built not to rust. Buyers describe them as a 100% improvement over stock, with the look and function of far pricier shorty levers. The adjustability wins people over as well — you can get the throw dialed in exactly where your fingers want it. That adjustability is a real ergonomic benefit on a trail bike where you are working the clutch constantly.
The one area that draws mixed reports is the clutch side, and a little durability caution is fair on a machined alloy part. The kit is specific to the L, LE, and LW trims, so a plain TTR125 owner should verify fit before ordering. For the price of a single ride’s fuel, you get levers that change the cockpit feel and add one year of warranty coverage. If you want a tangible upgrade on a budget, this is it.
Feel you can notice: CNC-machined 6061-T6 aluminum with a stainless bolt, at just 7.68 ounces for the pair.
Fit to confirm: aimed at the L, LE, and LW trims, so plain TTR125 owners should check first.
Ideal for: a TTR125 L, LE, or LW rider who wants a sharper cockpit feel and a look that stands out.
Confirm before you commit: your trim is on the fit list, since this set is not aimed at the base TTR125.
7. M MATI Front Disc Brake Caliper with Pads
A seized caliper solved in one swap — assembly, pads, and bracket included.
When a front caliper seizes, rebuilding it is fiddly work. This M MATI unit arrives as a full assembly with the caliper, brake pads, banjos, and the exact mounting bracket, so you swap the whole part rather than fight a stuck piston. It carries manufacturer part numbers 5PA-2580T-00-00, 3UN-2580T-00-00, and 4ES-2580T-20-00, and cross-references four more. Fitment covers the TTR125 from 2000 to 2023, plus the YZ65, YZ80, and YZ85. The whole assembly weighs 1.39 pounds.
The engineering detail that earns trust is inside the piston. An alloy piston and anti-ageing seal kit are built to deliver more braking force and a longer service life than a tired original caliper. Because it comes with the pads and the mounting bracket, there is no adjustment needed on the bench — it installs directly. For a safety-critical part, that direct-install design means less chance of a mistake during the swap.
The one caveat is that it is a single-sided front caliper kit, so it handles one corner rather than a full brake overhaul. If you are simply replacing a worn caliper, this is the whole job in a box. Fit runs all the way to 2023, which is the widest span of any brake or engine part in this group.
Built for: a rider replacing a seized or leaking front caliper who wants pads and bracket included.
Note: this covers the front only, so inspect your rear brake separately.
8. Specbolt 120pc Fastener Kit
Every stripped bolt on your TTR, solved from one tough parts box.
You buy this kit once and stop scavenging for a missing fastener mid-repair. Specbolt packs 120 pieces into a six-compartment poly storage box: flange bolts, nuts, screws, special fasteners, and fender washers. The bolts are heat-treated to 8.8 and 10.9 grade, matching or exceeding the original hardware specs on the bike. Maximum shear strength is 384 N/mm² for the 8.8 bolts and 498 N/mm² for the 10.9, with a silver zinc finish.
What owners praise most is the quality. These are OE-type fasteners, not the soft hardware-store bolts that round off the first time you lean on them. The completeness is the other half of the story — the assortment covers periodic upkeep across the whole TTR line, from TTR50 through TTR600, from 1995 to current. That makes it the one purchase that serves whatever TTR you happen to own or wrench on.
The caveat is that it is a maintenance supply, not a single fix. You will not buy it to solve today’s problem unless today’s problem is a stripped bolt, but you will reach for it repeatedly over the life of the bike. For the home mechanic who wants to stop keeping a coffee can of mismatched bolts, this kit earns its place on the bench. It is the least glamorous part here and possibly the most used.
Buy once, reach often: 120 heat-treated pieces organized in six compartments, ready for the next repair.
The catch: it is a stock of fasteners, not a fix for one specific fault.
Matches the home mechanic: anyone doing their own maintenance who is tired of hunting for the right bolt.
Not for you if: you only ever hand the bike to a shop and never touch a fastener yourself.
9. FLYPIG 54mm Cylinder Piston Top End Rebuild Kit
The deep repair — cylinder, piston, and rings for a tired top end.
This kit is the one job in the group that opens the engine. FLYPIG sells it as a cylinder, piston, and rings top end set with the gaskets, sized at a 54mm bore for 125cc displacement. The cylinders fits TTR125 2000-2003 and TTR125E 2003-2004, and it explicitly does not fit the 2005 TTR125. That year disclaimer is the most important line on the page — check it before you buy. The kit weighs 3.72 pounds.
Customers note the parts run close to OEM spec, and that is the whole value in a top end kit. When the bore size and the rings match the factory, the engine seals up and runs right. The reviving story you hear is a bike coming back to life after the rebuild, which is the goal for a worn top end. The quality of the machining draws the most praise, followed by how well it functions and how precisely it fits into the engine.
The honest limit is support info. The kit ships with no installation instructions, so you need a service manual or real engine experience to fit it correctly. It also only covers the early years, so a later TTR125 owner is out of luck with this exact unit. For a rider ready to tackle a top end on an early TTR, this is a complete, well-regarded kit that beats the job of buying the pieces one at a time.
What a top end buyer is after
- Cylinder, piston, rings, and gaskets in one complete set
- 54mm bore matches the 125cc displacement for early TTR125 and TTR125E
- Machining quality and near-OEM specs draw the most praise
Before you open the engine
- No installation instructions — bring a service manual or experience
- Does not fit the 2005 TTR125, and only covers early years
Reserved for: an early TTR125 or TTR125E owner ready to do real engine work.
Wrong tool if: you have a 2005 or later bike, or you want a part that installs without a manual.
Know the Specs
These are the details that actually decide whether a TTR125 part fits and works. Each one answers a question you will face at the checkout.
OEM part numbers and fit ranges
An OEM number is Yamaha’s own code for a part, printed like 5HP-14450-00-00. When a listing names the OEM number it replaces, you can match it against your old part or service manual. The year range beside it is the second gate — a filter that fits a 2003 plain TTR125 may not fit a 2005. Always reconcile both before buying.
Bore size and displacement
A top end kit lists a bore size in millimeters and a displacement in cc. The FLYPIG kit runs a 54mm bore for 125cc. If the bore does not match your cylinder, the piston will not seat, so this is the number to verify against your engine, not the marketing title.
Fastener grades and shear strength
Bolts carry a grade number like 8.8 or 10.9, which signals how much load they can take. Higher grade means the head is less likely to round off or snap. Maximum shear strength in N/mm² tells you how much sideways force a bolt handles before it fails — useful when you are torquing engine and frame hardware.
Intake and inlet dimensions
Carburetor and fuel parts are measured in millimeters at the connections. A carburetor lists a 25mm intake, a 36mm outer intake, and a 40mm air filter side. A fuel petcock lists an 8mm inlet. If these sizes miss your existing boots and lines, the part will not seal, so measure before you order.
Common Questions
How do I know which TTR125 parts fit my exact model year?
Will a top end rebuild kit for a 2003 TTR125 fit a 2005 model?
Do I need to tune a new carburetor after installing it?
What does the OEM number on a part listing actually tell me?
Can I upgrade just the clutch levers on a TTR125?
Is a complete clutch kit better than replacing plates alone?
What is the difference between a fuel valve and a carburetor kit?
Do I need a bolt kit if I only do occasional maintenance?
Will a disc brake caliper for a TTR125 fit a YZ85 as well?
How long should TTR125 wear parts like filters and clutches last?
The Bottom Line
For most TTR125 owners, the winner is the MOTO1988 Air Filter & Spark Plug assembly, because it covers the widest year range and solves the most common tune-up in a single order. If you want to feel a real change in the cockpit, grab the FTRT Pivot levers for the sharpest upgrade on the list. And for a fuel drip you want sorted with all the hardware in the bag, the MOTO1988 fuel valve kit is the practical pick.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





