6 Best XL ATX Motherboard | Four DIMM Slots, Zero Compromises

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

Buying an XL ATX motherboard is really a question of what you refuse to give up. These boards give you the bigger footprint that fits four memory sticks, a stack of M.2 drives and a graphics card that occupies three slots without forcing you to choose between them. The catch is that the footprint only pays off if your case actually accepts an E-ATX board, so check that first. After that, the real decision is your processor socket: Intel LGA 1700 takes 12th Gen chips, LGA 1851 takes Core Ultra, and AMD AM5 takes Ryzen 7000, 8000 and 9000.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Some boards here are built for raw slot count, others for creator workloads or extreme overclocking, so the right choice depends on which one matches your build. Read on for the breakdown that makes picking an xl atx motherboard a simple call.

Top Picks

MSI MEG Z690 ACE Gaming Motherboard
Best OverallMSI MEG Z690 ACE Gaming Motherboard4.5+★100+ ratingsFive drive slots and two Thunderbolt ports on a board people keep running for years.Check price on Amazon
ASUS PROART X870E-CREATOR WiFi AMD EATX Motherboard
Creator PickASUS PROART X870E-CREATOR WiFi AMD EATX Motherboard4.0+★200+ ratingsA workstation board built around networking and drive speed rather than gaming bragging rights. The network hardware is what separates this board from the pack.Check price on Amazon

How To Choose The Best XL ATX Motherboard

An E-ATX board — extended ATX, the wider footprint that stretches past a standard ATX board — is a commitment. You get more room for memory sticks and expansion slots, but you also need a case that lists E-ATX support. Measure your case’s motherboard tray clearance before anything else.

Start With The Socket, Not The Spec Sheet

The socket is the physical bed your processor drops into, and it decides which chips the board will ever accept. Intel’s LGA 1700 takes 12th Gen Core processors. Intel’s LGA 1851 takes Core Ultra Series 2. AMD’s AM5 takes Ryzen 7000, 8000 and 9000. Buy the board that matches the chip you own or plan to buy, because no amount of extra slots makes up for a socket mismatch.

Memory Slots And Speed Ratings

Four DDR5 slots — DDR5 being the current generation of memory — let you run a full kit and still leave headroom. The board’s rated speed ceiling, listed in MHz or MT/s, tells you how fast a kit it can handle. A higher ceiling means your memory upgrade path stays open for longer.

M.2 Slots And PCIe Generations

M.2 slots are the small horizontal connectors that hold modern solid-state drives. More slots means more drives mounted directly on the board, with no cables. PCIe generation — 4.0 or 5.0 — sets the bandwidth ceiling for your graphics card and those drives, so a board with PCIe 5.0 slots is ready for the fastest current components.

Side-by-Side Comparison

Model Best For Processor Socket Memory Slots M.2 Connectors Amazon
MSI MEG Z690 ACE★ Best Overall Long-term reliability builds LGA 1700 DDR5 5x M.2 Amazon
ASUS PROART X870E-CREATOR WiFiCreator Pick Creator and AI workstations AM5 DDR5 4 M.2 Amazon
GIGABYTE TRX50 AERO D Threadripper PRO workstations sTR5 4 — Amazon
MSI MEG Z890 GODLIKE Overclocking show builds LGA 1851 4 8 M.2 Amazon
GIGABYTE X870E AORUS Xtreme AI TOP AM5 builds with heavy power needs AM5 4 4x M.2 Amazon

Detailed Reviews

★ Best Overall

1. MSI MEG Z690 ACE Gaming Motherboard

Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.

Dual Thunderbolt 4Quintuple M.2

Five drive slots and two Thunderbolt ports on a board people keep running for years.

The Z690 ACE’s standout number is five: it carries five M.2 connectors (the small horizontal slots that hold modern SSDs) with a quad Lightning Gen 4 solution. That means you can mount four or five fast drives straight onto the board instead of stringing cables through the case. For anyone who shoots or edits video, that is the difference between juggling external drives and keeping everything internal.

You can drop in a 12th Gen Intel Core processor without changing the socket, because the board uses the LGA 1700 socket (Intel’s mounting standard for those chips). It runs DDR5 memory rated up to 6666 MHz, so fast RAM is supported from the start. The two back ports are Thunderbolt 4 USB-C running at true 40 Gb/s (a very fast cable standard), and they support 8K display output plus daisy-chaining — so one cable can feed a monitor and pass data to a chain of accessories at the same time. A genuine 24K-gold foil heatsink sits over a dark black finish, a cosmetic detail that only matters if your case has a glass panel.

Reliability is the theme reviewers return to most, and it is what wins people over by a distance. The double-sided Shield Frozr design keeps the M.2 drives covered and stops them throttling, which is exactly the kind of long-term durability those buyers are describing. The honest counterpoint is the quality conversation: opinion splits there, so read it as a signal to buy from a seller with a clean return path rather than a reason to walk past a board this well-liked overall. Its 4.5+ star rating and five M.2 connectors plus dual Thunderbolt 4 ports are what earn it the top spot here.

Where it earns the crown

  • Five M.2 connectors with Shield Frozr covers keep a whole drive library internal and cool
  • Dual Thunderbolt 4 at 40 Gb/s handles 8K output and daisy-chained accessories from one port
  • DDR5 rated to 6666 MHz leaves room for a fast memory kit
  • Reliability is the single thing owners bring up most about this board

What to weigh first

  • The LGA 1700 socket is tied to 12th Gen Intel Core chips, so plan your processor around it
  • Build-quality opinions split, so buy from a seller with a straightforward return policy

Go this way if: you want an Intel build with as many internal drives as possible and Thunderbolt on the rear panel.

Think twice if: you are building on AMD AM5 or a newer Intel socket — this board will not take those chips.

Creator Pick

2. ASUS PROART X870E-CREATOR WiFi AMD EATX Motherboard

WiFi 7Dual USB4

A workstation board built around networking and drive speed rather than gaming bragging rights.

The network hardware is what separates this board from the pack. It carries both a 10 Gb and a 2.5 Gb LAN port (wired network connections) alongside WiFi 7 (the newest wireless standard). The 10 Gb port keeps large project files moving between a server or NAS (network storage) and your desk without a bottleneck. If you regularly move multi-gigabyte renders or footage between a NAS and your desk, the 10 Gb port saves real working time.

Under that sits an AMD AM5 socket ready for Ryzen 9000, 8000 and 7000 Series processors, with 16 + 2 power stages feeding the chip. ASUS bundles AI overclocking, AI Cooling II, AI Networking II and AEMP to take the guesswork out of setup, which helps if you would rather build once and get back to work than tune voltages for a weekend. Four M.2 slots and dual USB4 round out the connection set.

The cooling is worth a mention on its own: integrated heatsinks tied to the I/O cover by an L heat pipe and joined to the feed ladder with high-conductive thermal pads. In plain terms, the parts that get hot are connected to a shared metal path so heat spreads instead of stacking up in one corner. Pick this one when your workload is creation rather than competition — the drive and network layout is the reason to buy it.

Why it belongs here: 10 Gb plus 2.5 Gb LAN and WiFi 7 make this the connectivity leader of the group, and four M.2 slots keep your project library on-board.

Size it up honestly: the AM5 socket rules out Intel chips entirely, and at 1.6 kg it is a heavy board to seat, so fit it before you cable anything up.

Built for: editors, 3D artists and AI workloads that live and die by file transfer speed.

Not your board if: you already own an Intel processor — the AM5 socket leaves no room to negotiate.

Threadripper Pick

3. GIGABYTE TRX50 AERO D E-ATX Motherboard

sTR5 SocketDual USB4 Type-C

The workstation-class outlier here, and its socket is the whole story.

The TRX50 AERO D runs the AMD sTR5 socket for Ryzen Threadripper PRO 7000 Series processors — a different processor family from every other board in this list, which all sit on AM5 or an Intel socket. If you are speccing a Threadripper PRO workstation, this is the group member that fits, and nothing else here will. Its memory is a 4-slot R-DIMM design with AMD Expo and Intel XMP support, where R-DIMMs are the registered memory modules workstation platforms use.

Weight is the practical number that separates it: at 1814 g it is lighter than the GIGABYTE X870E AORUS Xtreme AI TOP, which comes in at 3692 g. Power delivery is a 16+8+4 phase digital VRM (the voltage-regulator stages that feed a demanding processor) with VRM Thermal Armor and an M.2 Thermal Guard over the drives. You also get dual USB4 Type-C, PCIe 5.0, EZ-Latch quick-release connectors for the graphics card and M.2 slots, and 10GbE plus 2.5GbE dual LAN with WiFi 7.

Performance is what buyers report most, and clean Windows and Linux operation is the detail Threadripper PRO buyers care about. Compatibility is a more mixed conversation, which makes sense for a platform this specialised: confirm your processor, memory modules and any add-in card against the support list before you commit. The reward is a workstation foundation that nothing else in this list can substitute for.

The right call when: you are building around a Ryzen Threadripper PRO 7000 Series chip and need R-DIMM memory support.

Keep looking if: you are on a mainstream AM5 or Intel processor — the sTR5 socket will not accept it.

Overclocking Pick

4. MSI MEG Z890 GODLIKE E-ATX Motherboard

26 DRPS Power3.99″ LCD

Twenty-six power stages, eight M.2 positions and a screen bolted to the board itself.

The headline is memory speed: this board is rated for DDR5 at 9200 MHz, which stands well clear of the GIGABYTE X870E AORUS Xtreme AI TOP at 5200 MHz. If you plan to push a fast memory kit as hard as it will go, that ceiling is the number that matters. Feeding the socket is a 26 DRPS (110A, SPS) power stage array for Intel Core Ultra Series 2 processors on the LGA 1851 socket, backed by Core Boost.

Then there is the storage layout, and it is genuinely unusual: two M.2 Gen5 x4 and four M.2 Gen4 x4 slots sit on the board, and the included M.2 XPANDER-Z SLIDER GEN5 adds two more Gen5 positions. That is eight drive positions in a single system. Four DDR5 DIMM slots support up to 256 GB of memory. The 3.99″ LCD on the board handles hardware monitoring and personalization, so you can watch temperatures without opening another window.

Cooling gets the same attention: a wavy fin design, a direct-touch cross heat pipe, 9W/mK MOSFET thermal pads (thermal pads rated for heat transfer), extra choke pads, double-sided EZ M.2 Shield Frozr II and a combo-fan header carrying 3A for a pump and system fans. Setup is the part owners tend to enjoy — the EZ Link with EZ Bridge and EZ Control Hub, PCIe Release, EZ Magnetic M.2 Shield and EZ M.2 Clip II all cut down on screwdriver work. Weigh the quality conversation, though: it is the most-discussed topic around this board and reads mixed, so buy it with a solid return path and set it up carefully.

The case for it: eight M.2 positions, a 9200 MHz memory ceiling and a 26-stage power design put it at the front of this group for overclocking headroom.

The trade-off: that same complexity makes it a build to take slowly, and the quality discussion around it is mixed rather than settled.

Choose it for: an Intel Core Ultra Series 2 build where drive count and memory speed are the whole point.

Look past it if: you want a simple first build — this board rewards patience and punishes rushed assembly.

Powerhouse Pick

5. GIGABYTE X870E AORUS Xtreme AI TOP E-ATX Motherboard

18+2+2 Power Stages5-Year Warranty

An AM5 board that treats power delivery and warranty length as the headline features.

The power design is the reason to look here: 18+2+2 phases with 110A Smart Power Stage components. Those stages are the parts that convert and regulate power for the processor, and a large count like this keeps voltages steady when a high-core Ryzen chip pulls hard for a long render. It supports AMD Ryzen 9000, 8000 and 7000 Series processors on the AM5 socket, with four DDR5 DIMM slots using AMD EXPO profiles and a 5200 MHz memory rating.

Connectivity covers PCIe 5.0, four M.2 slots, dual USB4, both front and rear USB-C, a Sensor Panel Link and 10GbE LAN with WiFi 7. The DIY aids are where this board quietly earns its keep — M.2 EZ-Latch, PCIe EZ-Latch, Wi-Fi EZ-Plug and an EZ-Debug Zone. Latch fittings mean you seat a drive or graphics card and clip it down instead of hunting for a tiny screw, and the debug zone shows you where a build has stalled. Backing all of it is a 5-year warranty, which is the longest coverage promise in this list.

Thermals are handled by VRM and M.2 Thermal Guard, so the power stages and the drives both get metal over them. For an AM5 build that will run hot and long, the phase count and that warranty are the two things worth paying attention to.

What makes it worth the bench space

  • 18+2+2 phases at 110A keep voltage steady under sustained heavy loads
  • 5-year warranty is the longest coverage promise in this group
  • EZ-Latch fittings on M.2 and PCIe plus an EZ-Debug Zone simplify assembly and troubleshooting
  • 10GbE LAN, WiFi 7 and dual USB4 cover workstation-grade connectivity

What you should know going in

  • At 3692 g it is a heavy board that needs support while you seat it
  • Memory is rated to 5200 MHz, well below the 9200 MHz ceiling of the MSI MEG Z890 GODLIKE

Right pick for: AM5 builders running high-core Ryzen chips who want stout power delivery and long coverage.

Weigh this instead: if maximum memory speed is your target, the Z890 GODLIKE’s 9200 MHz rating sits far above this board’s 5200 MHz.

Know the Specs

Processor Socket

The socket is the physical bed your processor sits in, and it is the single hardest limit on an XL ATX build. LGA 1700 takes 12th Gen Intel Core chips, LGA 1851 takes Intel Core Ultra Series 2, AM5 takes AMD Ryzen 7000, 8000 and 9000, and sTR5 takes Ryzen Threadripper PRO 7000. No BIOS update or adapter bridges these — pick the board that matches the chip you are buying.

Memory Slots And Speed

Four DDR5 slots let you run a full kit and still upgrade later. The rated speed — listed in MHz or MT/s — is the ceiling the board can handle, so a 9200 MHz rating gives your memory kit far more headroom than a 5200 MHz rating. You do not have to use that speed today, but the ceiling decides what you can move to next.

M.2 Connectors

M.2 slots hold modern solid-state drives flat against the board, with no data or power cables. PCIe generation sets the bandwidth: Gen5 x4 slots move data faster than Gen4 x4 slots. If you shoot large media files, count the slots before you count anything else — five, seven and eight slot boards live in this list.

Power Stages And VRM Cooling

Power stages convert and regulate the power your processor draws, and the phase count tells you how much sustained load the board is built for. Cooling armor over those stages keeps them from throttling during long workloads. Numbers like 18+2+2 phases at 110A or 26 DRPS (110A, SPS) describe that delivery capacity.

Common Questions

Will an E-ATX motherboard fit my existing case?
Only if the case’s specification list names E-ATX support. An E-ATX board is wider than a standard ATX board, so check the manufacturer’s supported form factors and the tray clearance before buying. If the case only lists ATX, micro-ATX or mini-ITX, the board will not seat properly.
What is the difference between an XL ATX motherboard and a standard ATX board?
The XL or E-ATX board is physically larger than a standard ATX board, which gives room for more memory slots, more M.2 connectors and extra expansion slots. That extra footprint is why boards in this group carry four DDR5 DIMMs and up to eight M.2 positions, while a standard ATX board typically carries fewer of both.
Can I use an Intel processor in an AM5 motherboard?
No. AM5 is an AMD socket for Ryzen processors, and Intel chips need an LGA socket. The MSI MEG Z690 ACE uses LGA 1700 and the MSI MEG Z890 GODLIKE uses LGA 1851, while the ASUS PROART X870E-CREATOR, the GIGABYTE X870E AORUS Xtreme AI TOP and the MSI MEG X870E GODLIKE all use AM5.
How many M.2 drives can I install on one of these boards?
It depends entirely on the model. The ASUS PROART X870E-CREATOR lists four M.2 slots, the GIGABYTE X870E AORUS Xtreme AI TOP lists four, the MSI MEG Z690 ACE lists five M.2 connectors, the MSI MEG X870E GODLIKE lists seven, and the MSI MEG Z890 GODLIKE reaches eight when you count the included M.2 XPANDER-Z SLIDER GEN5.
Do I need a 5-year warranty on a motherboard?
It is a meaningful safety net on a premium component, since a board failure can take a whole build out of service. The GIGABYTE X870E AORUS Xtreme AI TOP is the pick here that carries a 5-year warranty, which is longer than the coverage listed for the other boards in this group.
What does the DDR5 speed rating in MHz actually mean?
It is the fastest memory speed the board is rated to handle. The MSI MEG Z890 GODLIKE reaches 9200 MHz, the MSI MEG X870E GODLIKE reaches 9200 MT/s overclocked, the MSI MEG Z690 ACE reaches 6666 MHz, and the GIGABYTE X870E AORUS Xtreme AI TOP reaches 5200 MHz. A higher rating means more room for a faster kit later.
Is Thunderbolt 4 or USB4 better for my build?
Both move data at 40 Gb/s, so the choice depends on what is on the board you want. The MSI MEG Z690 ACE carries dual Thunderbolt 4 USB-C with 8K display support and daisy-chaining. The GIGABYTE TRX50 AERO D, the GIGABYTE X870E AORUS Xtreme AI TOP and the MSI MEG X870E GODLIKE carry USB4 Type-C instead. Match the port type to the accessories you already own.
Will an E-ATX board fit a graphics card that takes three slots?
The wider E-ATX footprint gives you more room between expansion slots, but the case still determines the clearance for a thick card. Check the case’s maximum graphics card length and slot width alongside the board’s layout. Note also that EZ-Latch quick-release fittings appear on the GIGABYTE TRX50 AERO D and the GIGABYTE X870E AORUS Xtreme AI TOP, which makes removing a card easier.
How fast is 10GbE LAN compared to the standard network port on most boards?
A 10GbE port is a much faster wired connection than the 2.5GbE port that appears alongside it on several boards here. The ASUS PROART X870E-CREATOR carries both a 10 Gb and a 2.5 Gb LAN port, the GIGABYTE TRX50 AERO D carries 10GbE plus 2.5GbE, and the MSI MEG X870E GODLIKE carries 10Gbps plus 5Gbps. You need matching network hardware to use that speed.
Can I run a Threadripper PRO processor on an AM5 board?
No. Ryzen Threadripper PRO 7000 Series processors need the AMD sTR5 socket, which is what the GIGABYTE TRX50 AERO D uses. The AM5 boards in this group — the ASUS PROART X870E-CREATOR, the GIGABYTE X870E AORUS Xtreme AI TOP and the MSI MEG X870E GODLIKE — take Ryzen 9000, 8000 and 7000 Series desktop chips instead.

The Bottom Line

For most builders, the strongest all-round pick is the MSI MEG Z690 ACE: five M.2 connectors (slots for stick-shaped SSDs), dual Thunderbolt 4 at 40 Gb/s and a long-running reliability record cover what an E-ATX build is bought for. If your work is file-heavy rather than game-heavy, the ASUS PROART X870E-CREATOR leads on connectivity with its 10 Gb and 2.5 Gb LAN pair and four M.2 slots. And if you need Ryzen Threadripper PRO, the GIGABYTE TRX50 AERO D is the only socket here that will take that chip. The 4.5+ star Z690 ACE is the crowd favourite here, and its five M.2 connectors and dual Thunderbolt 4 ports are why.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top