Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your Elite controller is not broken — usually it is one worn thumbstick, one mushy bumper, or a paddle that snapped off. That is where most buyers get burned: Elite Series 1 (Model 1698) and Elite Series 2 (Model 1797) parts do not swap, and a kit listed for one will not seat in the other.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Below you will find kits for drifting joysticks, dead bumpers, and worn paddles — each matched to the model it actually fits. Every pick here is a real component set for the Xbox Elite pad, sorted by what it repairs and which model it seats into, so you can buy the Xbox Elite Controller Parts that match your controller instead of guessing.
Top Picks



How To Choose The Best Xbox Elite Controller Parts
The first decision is not brand or budget — it is the model number stamped on your controller. Get that wrong and nothing else matters, because the parts simply will not seat.
Match the model number before anything else
Xbox One Elite Controller Series 1 carries Model 1698. Xbox Elite Series 2 and the Series 2 Core carry Model 1797. A thumbstick kit built for 1698 will not lock into a 1797 body, and the reverse is true too. Check the label under the battery cover or on the box before you order.
Decide whether you are fixing or upgrading
A repair kit solves one fault: a drifting stick, a dead RB or LB bumper, a snapped paddle. An upgrade pack replaces the whole wearable set at once. If two or three parts are already worn, the full pack usually makes more sense than buying them one at a time.
Know which fixes need a soldering iron
Thumbstick caps, paddles, and D-pads are push-on or magnetic — no tools, no disassembly. Bumper switches and joystick modules are soldered to the board. If you have never soldered, budget for a professional fitting or choose a tool-free part instead.
Side-by-Side Comparison
| Model | Best For | Fits Which Model | Parts Included | Install Type | Amazon |
|---|---|---|---|---|---|
| BSUZUN Complete Component Pack★ Best Overall | One-box overhaul with charging dock | Elite Series 2 / Core (1797) | Case, dock, cable, 4 sticks, 4 paddles, D-pad, tool | Tool-free swap | Amazon |
| SOSS GAMING 15-in-1 Thumbstick KitBudget Spares Box | Budget all-rounder spares box | Elite Series 2 | 8 sticks, 4 paddles, 2 D-pads, 2 screwdrivers, pry tool, key, case | Tool-free swap plus screwdrivers | Amazon |
| TOMSIN 6-in-1 Thumbsticks (Series 1)Series 1 Specialist | Elite Series 1 owners only | Elite Series 1 only (1698) | 6 thumbsticks in 3 heights and shapes | Tool-free magnetic swap | Amazon |
| GuliKit TMR Joystick Replacement | Permanent cure for stick drift | Series X|S and Elite Series 2 | 2 TMR stick modules, 2 KK ring caps | Soldering required | Amazon |
| SOSS GAMING Tactile Switch Kit | Dead or mushy RB / LB bumpers | Xbox One base, S, X, Elite Series 1 and 2 | 10 tactile switches, T8 and T6 Torx, pry tool | Soldering required | Amazon |
| eXtremeRate Swift Paddles | Paddle replacement in stainless steel | Elite Series 1 (1698) and Series 2 (1797) | 6 metal paddles in 3 designs | Tool-free slot-in | Amazon |
| VANPARK Metal Replacement Kit | Metal stick and D-pad set with colour change | Elite Series 2 (1797) | 6 metal sticks, 4 paddles, 2 D-pads, tool | Tool-free magnetic swap | Amazon |
| TOMSIN 13-in-1 Pack | Full chrome-stainless refresh | Elite Series 2 / Core (1797) | 6 metal sticks, 4 paddles, 2 D-pads, 1 adjuster | Tool-free magnetic swap | Amazon |
| eXtremeRate 13-in-1 Component Pack | Custom colour finish | Elite Series 2 / Core (1797); D-pad and paddles also fit Series 1 | 6 sticks, 4 paddles, 2 D-pads, 1 adjustment tool | Tool-free magnetic swap | Amazon |
Detailed Reviews
1. BSUZUN Component Pack Xbox Elite Series 2
Our pick — 4.5+★ from 600+ verified ratings; the strongest balance of quality and price.
One box that replaces the whole wearable set — and charges the pad while it sits inside.
Most kits give you spare sticks and nothing to hold them. This one builds the storage into the product: a carrying case with cut grooves for the controller and the loose thumbsticks, plus a magnetic charging dock that anchors to the bottom of the case so the pad charges while it is packed away. The case has a passthrough, so the controller charges while it stays packed.
The parts count is the reason it takes the top spot. You get 1 interchangeable D-pad (standard), 4 interchangeable thumbsticks (2 classic, 1 tall, 1 dome), 4 paddles (2 medium, 2 mini), 1 charging cable, and 1 adjustment tool — every wearable replaced in one order instead of four. Fit is the second thing owners notice; the pieces seat cleanly on the Elite Series 2 Core and the Elite Series 2, both Model 1797.
Here is the catch, and it is a hard one: this pack is not for the Xbox Elite Wireless Controller Model 1698. If your pad is the original Elite Series 1, none of it seats. Measure your model number before you buy, because nothing else in the listing will save you. For 1,500+ owners, value is the thing that wins people over — the point being that a full refresh plus a case and dock costs a fraction of a new premium pad.
What earns the top spot
- Case, charging dock, and cable bundled with the parts — a full travel setup in one purchase
- 4 thumbsticks across classic, tall, and dome profiles, so you can tune the feel per game
- Magnetic dock base locks to the case so the controller charges without being unpacked
- 2 medium and 2 mini paddles included, matching the factory spread
- 1-year warranty from the manufacturer
Where it stops
- Only fits Model 1797 — the Series 1 Elite (1698) is not supported
- Colour feedback is mixed, so do not expect a perfect shade match to your pad
Buy this if: you own an Elite Series 2 or Series 2 Core and want storage, charging, and every spare in one order.
Keep looking if: your controller is a Series 1 (1698) — this pack will not seat at all.
2. SOSS GAMING 15-in-1 Thumbstick Kit Elite Series 2
The kit that assumes you will wear out more than one stick — and packs tools to open the shell too.
Count the sticks against the competition and the pitch becomes obvious: 8 removable thumbsticks, arranged as 4 pairs, versus 4 in the BSUZUN pack — a 2.0x gap in stick count alone.
What else is in the box is unusually complete for the entry tier: 1 T8 Torx screwdriver, 1 precision Phillips screwdriver, 1 plastic prying tool, 4 paddles, 2 metal D-pads, 1 joystick tension adjustment key, and a case to keep it all together. The Torx drivers let you open the controller shell yourself, and the tension key lets you dial in how stiff the stick push feels. Installation is a straight swap — pull the old part, press the new one on.
Owners describe it as the fix for a worn or broken thumbstick without buying another pad, which is the whole reason kits like this exist. It is built for all Xbox One Elite Series 2 controllers, and for any pad whose joysticks have already been converted to Elite Series 2 sticks. Stop short of assuming it covers bumper repairs: the switches in this kit are paddles and D-pads, not the RB/LB tactile units.
The value read: at entry-tier money you get the widest stick selection in this list plus two screwdrivers and a pry tool. That is a spare-parts drawer in one box, not a single emergency replacement.
The honest limit: the warranty runs 90 days, the shortest cover here. Treat the drivers as light-duty and use a proper kit if you plan to open the shell often.
Right call for: Series 2 players who want a stockpile of stick profiles and the tools to fit them.
Not the one for: anyone chasing a dead bumper — this kit has no tactile switches.
3. TOMSIN Replacement Thumbsticks Xbox Elite 1
Six steel-and-rubber sticks built for the original Elite — the 1698 body nobody else in this list targets.
Almost every kit here points at Model 1797. This one points the other way, and it says so plainly: for the original Xbox One Elite Wireless Controller Series 1, Model 1698, and not for Elite Series 2 or the Series 2 Core. If you are still running the first Elite, this is the pick that actually seats, and the build is steel with a rubberised top and sides rather than bare plastic.
The stick count is 6, spread across 3 heights and shapes, so you can set a taller domed stick for aiming and a shorter one for movement in the same session. They are magnetised to drop into position on the controller, and the maker says they hold unless you deliberately pull with pressure. Swapping needs no tools at all. The one part that is not included is the magnet thumbstick base — you reuse the one already in your controller.
Quality is clearly the strong suit here; buyers rate the feel and build of these sticks highly. The friction point is fit and magnetism: some find the sticks looser than the factory set, and the magnets are not strong enough to satisfy everyone — a stick can come free under a hard flick. It is not a defect across the board, but it is a real fit-note worth knowing before you commit.
The case for it
- Steel core with rubberised grip surfaces, matching the original button set
- 6 sticks across 3 heights and shapes for per-game tuning
- No tools required — attach or remove by hand
- One of the few kits explicitly built for Series 1 Model 1698
The fit caveat
- Magnetic hold divides opinion — some sticks pull free under hard use
- Magnet base not included, so you reuse your existing one
- Will not fit Series 2 or Core pads at all
Made for: the Elite Series 1 owner who wants a taller and shorter stick set without touching a screwdriver.
Think again if: you need a stick that locks down hard under aggressive play — the magnet hold is the weak point.
4. GuliKit TMR Joystick Xbox Series X|S Elite 2
Fix the drift at the source instead of swapping caps and hoping it stops.
Every other kit here replaces what you touch. This one replaces the sensor underneath. The TMR module — Tunnel Magnetoresistance, a contact-free magnetic sensing design GuliKit evolved from its Hall Effect stick — reads stick position through a magnetic field, so there is no physical wiper to wear down and start drifting. That is a sensor-level repair, not a cap swap.
It fits Xbox Series X|S and Elite Series 2 controllers, and it does not fit Xbox 360, Xbox One, or Elite Series 1. The install is the honest gate: soldering is required, plus a desoldering pump or wick and a steady hand. GuliKit states plainly that professional fitting is the safer route if you have not soldered before. Once fitted, you recalibrate through the console or the Xbox Accessories app on PC and follow the on-screen steps.
There is a model-specific catch for Elite Series 2 owners: after fitting, only the thumbstick caps in this box work. The factory caps use a screw-on structure and will not seat on the new module, so you commit to the included GuliKit KK ring caps. The payoff is a stick feel people describe as buttery smooth, with calibration that walks you through cleanly. Durability draws mixed views — some expect it to hold for years, others put it on par with cheaper sticks.
Why it is the real fix: contact-free magnetic sensing removes the wear surface that causes drift in the first place, which no push-on cap can do. 2 modules come in the box, one per stick.
What it demands: a soldering iron, board-level confidence, and the acceptance that your original Elite 2 caps retire permanently.
Reach for this if: drift has already ruined a stick and you want it gone for good rather than masked.
Look elsewhere if: you have no soldering experience and no local repair shop — a tool-free kit is the smarter entry.
5. SOSS GAMING Tactile Switch Repair Kit 10 Pack
For the RB or LB that clicks nothing — ten switches and the Torx drivers to get inside.
This kit exists for one specific failure: a bumper that does not register, registers only sometimes, or needs a hard press to fire. The fix is the tactile switch under the button, and you get 10 of them. As buyers report, the kit includes everything needed for installation, and the 10 switches are enough to repair up to 5 controllers — useful if you maintain a household of pads.
The tool set matches the job: 1 T8 security Torx screwdriver, 1 T6 Torx screwdriver, and a prying tool for opening the shell. Compatibility is the broadest in this list — it works with Xbox Original Controllers including Base, S, X, Elite Series 1, and Elite Series 2. One kit covers whatever Xbox pad in the house has a dead bumper.
Understand the barrier before you order: this is a soldering job. The old switch comes off the board and the new one goes on, and basic soldering skill plus a soldering iron are on you — neither is in the box. The maker frames it as cheaper than a replacement controller, which holds true if you can do the work or know someone who can. For anyone unwilling to solder, this kit is the wrong tool entirely.
Where it delivers
- 10 switches — enough to fix up to 5 controllers, per the maker
- Works across Base, S, X, Elite Series 1, and Elite Series 2 pads
- T8 and T6 Torx drivers plus a pry tool included
- Solves intermittent and hard-press bumper faults directly
Where it asks more of you
- Soldering iron and soldering skill required — neither supplied
- No good if you will not open a controller shell
Best for: tinkerers with a soldering iron and a stack of pads with dying bumpers.
Not for: anyone who wants a fix without touching a circuit board.
6. eXtremeRate Swift Paddles Elite 1 Elite Series 2
The one part here that fits both Elite generations — and is machined from stainless steel.
Paddle compatibility is normally a headache, because the two Elite bodies differ. These Swift Paddles sidestep it: they are cut for Xbox One Elite Model 1698 and Xbox Elite Series 2 and Series 2 Core Model 1797, so either pad takes them. That cross-generation fit is rare in this category, and it makes this a safe buy if you are unsure which pad you have.
Material is the other reason to look. The paddles are stainless steel, and the maker calls it military grade for comfort and durability, with a stated resistance to wearing out. That matters because the stock paddles are the part that snaps or rounds off first. Three paddle designs are in the box for mixing and matching, and the colour runs to a darker black. They stay compatible with the official Elite Series 2 charging dock, so you do not lose charging by swapping.
Swapping is genuinely quick — no controller teardown, just slot them in. The build quality is the part people talk about most, and the size draws praise from players with larger hands. Value is mixed: a few buyers feel the money is steep for paddles alone, and fit draws mixed feedback, so check that your model variant is covered before ordering. For a broken or missing paddle, it is a straightforward replacement that holds up.
Standout spec: 6 stainless-steel paddles in 3 designs, weighing 10 g, fitting both the 1698 and 1797 bodies. Steel over plastic is the durability upgrade here.
Worth knowing: paddle-only kit — there are no sticks or D-pads inside, so this is a targeted fix rather than a full refresh.
Pick it for: a snapped or worn paddle, especially if you are not certain which Elite model you own.
Pass on it if: you need thumbsticks or bumpers too — this box holds paddles only.
7. VANPARK Metal Thumbsticks and Paddles Replacement Kit (Red)
Gold paddles, metal sticks, and a fresh look — a full cosmetic and feel reset for Series 2.
The material list separates this from the plastic-heavy kits. The 6 Mod Swap thumbsticks are premium silicone over metal, while the 4 paddles and 2 D-pads are metal — a build the maker says will not wear out easily. That combination targets the two parts that fail first: the stick cap grip and the paddle arms.
You get 6 black metal sticks, 4 gold paddles split as 2 medium and 2 mini, 2 gold D-pads, and 1 silver thumbstick adjustment tool. Everything is removable and customisable, and the textured grips give your thumbs something to hold during long sessions. It fits Xbox One Elite Series 2, and it is built to change the look as much as the feel — gold against black is a noticeable shift from stock.
Owners mention it holding up after months of use, with function and fit landing well. The honest caveat sits with durability and build over time: a few buyers have seen the rubber peel away and described the finish as cheaply made. That is not the majority experience, but it is a fair thing to weigh if you play hard every day. A 6-month warranty covers you in the interim.
What it brings
- Metal paddles and D-pads, silicone-over-metal sticks
- 6 sticks plus a silver adjustment tool in the box
- Textured grips for extended play
- 6-month warranty from the manufacturer
What to weigh
- Rubber peeling is a recurring report over months of use
- Some find the build cheaper than the metal billing suggests
Suits the player who: wants metal parts and a bolder colour on the Elite Series 2 without tearing the controller apart.
One caution: if you want a factory-matching finish and expect years of hard play, the rubber wear is the thing to watch.
8. TOMSIN 13 in 1 Elite Series 2 Pack Green
Chrome-plated steel and a green splash — the cosmetic reset with a full-year warranty behind it.
Chrome plating is the differentiator. The paddles and D-pads are chrome-plated stainless steel, and the joysticks carry a rubber coating, so the metal parts get a polished finish on top of the strength. You get 6 metal sticks, 4 paddles, 2 D-pads, and 1 adjuster — a full wearable refresh in one pack. The green colour is the visible hook, and it lands well against the controller.
Compatibility is strict: for Xbox Elite Wireless Controller Series 2 (Model 1797) and the Series 2 Core in White. It will not fit the Series 1 Model 1698, and that includes the sticks. Swapping is the easy part — the parts seat like magnets, the maker says they hold unless you pull with pressure, and no controller teardown or tools are needed. The buttons work the same as the factory set.
The mixed note here is value, and it is the most-discussed point on the listing — some buyers feel it earns its money, others do not. That is a matter of taste, not a defect. Durability and stability draw a split verdict too. Set against that is a full 1-year manufacturer warranty, the longest cover in this list, which takes much of the risk out of a mixed-value purchase.
The finish angle: chrome-plated stainless paddles and D-pads plus a green colourway — the pad looks rebuilt, not patched. Rubber-coated sticks keep the grip usable.
The fair warning: the value question is genuinely divided, so buy it for the look and the warranty, not on the promise of a bargain.
Choose it for: a Series 2 or Core pad that needs a full cosmetic and feel reset with warranty backing.
skip it if: you own a Series 1 (1698) — none of it fits.
9. eXtremeRate 13 in 1 Component Pack Kit
Every part in a colour that no two sets share — the gradient is random per piece.
Look past the parts count and the real product here is the finish. Each piece is mixed in the spectrum and randomly formed, so the gradient runs naturally and continuously across the set — no two controllers end up identical. It is the boldest finish here, and the one buyers praise most.
The parts themselves are the familiar full set: 6 thumbsticks, 4 paddles (2 long, 2 short), 2 D-pads, and 1 adjustment tool. The sticks are premium silicone over metal, the D-pads and paddles are metal stainless steel, and they work the same as the factory buttons. Fitting is tool-free and needs no teardown — the sticks and D-pads seat like magnets. Do note the controller, joystick base, and other parts are not included; this is the wearable set only.
Compatibility is where you have to read carefully. The kit is built for the Elite Series 2 and Series 2 Core (Model 1797). The D-pad and paddles also fit the Xbox One Elite Version 1 controller, but that does not extend to the thumbsticks. Fit draws mixed feedback as a result, mostly from Series 1 owners who expected the full kit to work. If your pad is 1797, the fit lands well.
Why it stands out
- Random gradient finish — each set is one of a kind
- 6 sticks, 4 paddles, and 2 D-pads in a single pack
- Silicone-over-metal sticks, stainless D-pads and paddles
- No teardown and no tools needed for the swap
Where it can trip you
- Sticks fit Model 1797 only; Series 1 owners get paddles and D-pads alone
- Controller and joystick base not included
The right buy for: Series 2 players who want their pad to look different from every other one on the shelf.
Know before you order: the rainbow finish is the point — if you need a matching factory colour, this is the wrong set.
Know the Specs
Model Number: 1698 vs 1797
The four digits stamped on your controller decide what fits. Model 1698 is the Xbox One Elite Series 1; Model 1797 is the Elite Series 2 and Series 2 Core. A thumbstick built for one will not seat in the other, and most compatibility failures trace back to this single mismatch. Check the label before you spend a penny.
Hall Effect vs TMR Sensing
Both read stick position through a magnetic field rather than a physical wiper contact, which is why they address drift at the source. TMR — Tunnel Magnetoresistance — is the newer of the two designs, and GuliKit evolved it from its Hall Effect stick. The practical difference for you: no wear surface inside the stick to grind down over time.
Soldered vs Tool-Free Parts
Sticks, paddles, and D-pads are push-on or magnetic — no tools, no teardown. Tactile bumper switches and joystick sensor modules are soldered to the board. Knowing which category your repair falls into tells you whether this is a five-minute job or a bench job with an iron.
What a Component Pack Actually Holds
A full pack covers the wearable set — typically 6 thumbsticks, 4 paddles split into long and short, 2 D-pads, and an adjustment tool. Some add a case, charging dock, and cable. A repair kit by contrast targets one fault: switches for a bumper, or a stick module for drift.
Common Questions
How do I know if my controller is Model 1698 or Model 1797?
Will Elite Series 2 thumbsticks fit an Elite Series 1 controller?
Do I need to solder to replace a drifting thumbstick?
Can I fix a dead RB or LB bumper without buying a new controller?
Are metal paddles better than the plastic originals?
What is the difference between a repair kit and a component pack?
Do replacement thumbstick caps work with the official charging dock?
How long should replacement parts last before I need new ones?
Can I mix parts from different kits on the same controller?
Why does my new thumbstick fall off during play?
The Bottom Line
For most Series 2 owners, the xbox elite controller parts winner is the BSUZUN Complete Component Pack, because it replaces every wearable part — 4 thumbsticks, 4 paddles, and a D-pad — and adds a carrying case and charging dock in the same box. If drift is your actual problem, the GuliKit TMR Joystick Replacement fixes it at the sensor level instead of the cap. And for a dead bumper on any Xbox pad in the house, the SOSS GAMING Tactile Switch Kit is the one to reach for — just have a soldering iron ready.
One thing note before you check out: the top pick carries the highest rating plus a large body of owner feedback behind it, and that combination is why it earns the top slot over the pack with the most reviews. Match your model number first, pick the part that fixes the fault you actually have, and you will be back on the pad instead of shopping for a new one.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





