Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your pellet grill quits mid-brisket and the first thing you do is guess which part died. That guessing game is the real problem. The right accessory fixes the failure in one order — and the wrong one leaves you with a part that won’t bolt up. This guide covers the covers, ignitors, auger motors, magnetic bins, grease buckets and thermal blankets that actually keep a wood pellet smoker running, plus exactly which models each one fits.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Every part below lists its fit list and its dimensions verbatim, because a burn pot that misses your hopper by half an inch is money burned. Fit and build quality decide whether a grill accessory earns a spot on your shelf, and this breakdown of best wood pellet grill accessories ranks each one on exactly that.
Top Picks



How To Choose The Best Wood Pellet Grill Accessories
Most pellet grill accessories are bought for one of two reasons: something on your smoker broke, or something on your smoker is annoying. Match the accessory to the reason and you will be happy. Buy a replacement part without checking your model number against the listing, and you will be shipping it back.
Check the compatibility list before anything else
A part can look identical to yours and still not fit. The burn pot, auger motor and flame broiler listings all carry explicit exclusion lists — grills that look like they should work but don’t. Read the “not compatible with” line first, in full, then confirm your exact model appears in the “fits” list. Measure your old part too, since a few listings give you the dimensions in inches and a tape measure settles it faster than the description does.
Match the part spec to the job
Replacement parts are sold by their spec, not their brand name. An auger motor is defined by its RPM (how many turns it makes each minute) and its voltage. A burn pot is defined by its dimensions and steel gauge. A flame broiler plate is defined by its length and width. Write those numbers down from your existing part and compare them line by line — that single habit avoids most fit complaints.
Decide if you want protection or convenience
Covers and thermal blankets protect the grill from weather and hold heat in. Magnetic bins and cleanout funnels make the cook easier. Grease buckets and liners keep cleanup from turning into a chore. Buy the protection items once and they last for seasons. Buy the convenience items because they save you time on every cook, not because they change the food.
Side-by-Side Comparison
| Model | Best For | Build Material | Key Spec | Fit Note | Amazon |
|---|---|---|---|---|---|
| GuardKove 1000D Grill Cover★ Best Overall | Year-round weather protection | 1000D Oxford fabric | 41″L x 22″W x 39″H | Traeger Pro 22/575 and similar | Amazon |
| COMVIEE Fire Burn Pot & Hot Rod KitBest Repair Kit | Restoring a dead ignitor | Stainless steel | 200W/120V hot rod, 30″ long | Traeger (except PTG) and most Pit Boss | Amazon |
| Sirozi 2 Pack Magnetic Storage BinMost Versatile | Workspace at the hopper | Metal | 4″D x 9.39″W x 3.38″H | Traeger Ironwood 885, Pro 34, Pro 22 and listed models | Amazon |
| Subody Cldkz 2.0 RPM Auger Motor | Replacing a burned-out feeder motor | PTFE-wired housing | 2 rpm, 120V 60Hz, 2 pole | Traeger, Pit Boss (except PTG), Camp Chef, Oklahoma Joe | Amazon |
| COMVIEE Upgraded 2.0RPM Auger Motor | Faster, stronger pellet feed | UL1332/18AWG wire | 2 rpm, 120V | Traeger (except PTG), Pit Boss, Camp Chef | Amazon |
| VattaFrast Magnetic Cleanout Funnel | Swapping pellet flavors cleanly | Metal | 8 oz, fits ports up to 4.5″ wide | Traeger, Pit Boss and most pellet grills | Amazon |
| CaptainGrill Grease Bucket & Lid | Pet-safe drip collection | Alloy steel, powder coated | 0.42 gal capacity, 12 liners | 1.6″ square tube side spout | Amazon |
| Unidanho Flame Broiler Kit | Reviving a Pit Boss 820/850 | HD stainless steel | 26″L x 15.5″W bottom plate | Pit Boss 820 and 850 series | Amazon |
| Unidanho Insulated Smoker Blanket | Cold-weather smoking | Ceramic fiberglass | 22 edge magnets | Traeger Woodridge Pro and Elite | Amazon |
Detailed Reviews
1. GuardKove 1000D Grill Cover BAC503
Our pick — 4.5+★ from 600+ verified ratings; the strongest balance of quality and price.
The cover that keeps a Traeger dry through a full winter of rain and sun.
A grill left outdoors ages fast, and the costliest damage is water getting into the hopper and rusting the internals. The GuardKove cover measures 41″L x 22″W x 39″H and is built from 1000D Oxford cloth — a woven fabric where the 1000D figure is the thread weight, so a higher number means a denser, tougher sheet. The maker rates its tear strength at twice that of 420D, 600D and 900D cover fabric. On a practical level, that means a branch scraping across it in a storm is not the end of the cover.
The three-layer waterproof build is the part that matters for a pellet grill specifically. A high-density outer layer, a PVC lining and heat-sealed waterproof tape sit between your hopper and the sky. Anyone who has watched water pool on a cheap cover will recognize the fix. Fit is what wins people over most, and the buckles at the bottom pull the skirt snug so a gust cannot walk it off the grill. There’s also a side zipper, which sounds small until you are wrestling a stiff cover over a hot smoker alone — the zipper lets you open the side and lift it off instead.
The honest catch is model-specific: this one is sized and listed for the Traeger Pro 22/575 family and similar-sized smokers, and the listing states plainly that it does not fit a Z Grill 550B. Measure your grill before ordering. It carries 4.5+ stars across 600+ ratings, and reviewers call it durable, snug-fitting and good-looking enough for a patio. It is the best overall here because a cover protects the entire grill, not one component.
What earns it first place
- 1000D Oxford cloth — denser than the 420D/600D/900D fabrics common at this level
- Triple waterproofing with heat-sealed tape keeps the hopper dry
- UPF 50+ fabric blocks 99.99% of UV rays from fading the cover
- Buckle straps on both sides plus a side zipper for solo removal
Before you order
- Sized for Pro 22/575-class grills, not every smoker
- Explicitly not compatible with the Z Grill 550B
Reach for this if: your Traeger lives outside year-round and you want one cover that handles rain, sun and wind.
Measure first: confirm your grill matches 41″L x 22″W x 39″H, since a cover that misses the dimensions will not seal.
2. COMVIEE Fire Burn Pot and Hot Rod Ignitor Kit
When the grill won’t light, this is the whole ignition circuit in one box.
A pellet grill that refuses to fire usually has one of two dead parts: the burn pot has rusted through, or the hot rod ignitor has stopped heating. This kit replaces both at once. The fire burn pot measures 5″ x 3 1/2″ x 3 3/4″ with 7 large air holes and a 14 gauge steel wall, and the hot rod runs 30″ total on a 200W/120V lead. Seven air holes is not decoration — airflow through the pot is what keeps the fire burning evenly instead of smoldering.
You get four parts in one box: one fire burn pot, one hot rod ignitor, one fuse and a set of screws. That’s four pieces in total. Installation is plug-and-play with basic tools. The instructions give you one detail worth following closely: set the new hot rod to protrude 1/8 to 1/4 inch into the fire pot. Get that depth right and it lights reliably; get it wrong and you are back to troubleshooting.
The compatibility line here is the most important thing on the page. It fits Traeger grills except the PTG, and most but not all Pit Boss models. It does not fit the D2 Direct Drive smokers — Pro 575 and 780, Ironwood 650 and 885, Silverton 620 and 810, Timberline 850 and 1300 (Gen 2 only), Century 885 — or the Pit Boss Pro 1150/1160. Buyers report the grill fires up in under 4 minutes once the new hot rod is installed. The electrical connector compatibility is a genuine split among owners, so check your plug style against the photos before ordering. If your screws don’t match, the listing suggests reusing your old ones.
Where this kit stands out: four pieces in one order means you fix the whole ignition path rather than guessing which single part failed.
The honest trade-off: a small number of owners mention short service life on the replacement, and the exclusion list is long enough that you must match your model exactly.
The right buy when: your older Traeger or Pit Boss won’t light and you want pot and ignitor done in one afternoon.
Look elsewhere if: you own a D2 Direct Drive model or a Pit Boss Pro 1150/1160 — this kit deliberately excludes them.
3. Sirozi 2 Pack Magnetic Storage Bin for Traeger Grills
Two magnetic shelves that turn the side of your hopper into counter space.
Pellet grills are short on flat surfaces, so rubs, tongs and a cold drink end up balanced on the hopper lid. This 2-pack of magnetic bins solves that with a simple trick — strong magnets clamp them to the metal sides of the hopper and hold through a full cook. Each bin measures 4″D x 9.39″W x 3.38″H, and paired together that gives you a meaningfully wider work area than a single tray. The fire burn pot above is a 3″D x 3″W x 5″H part by comparison, so these bins are visibly the broader surface of the two.
What makes them easy to live with is that there’s nothing to install. They slap onto the grill and come off for cleaning, and the rust-resistant metal handles the outdoors. Owners use them for spices, plates, tools and — per the listing’s own examples — water bottles. What everyone raves about is the magnet strength, and it’s the single thing that decides whether a magnetic bin is useful or annoying.
The catch is real but narrow. These fit a specific list of Traeger models: Ironwood 885, Pro Series 34, Pro Series 22, Pro D2 575, Pro 780, Ironwood 650, plus Century 22 and 34. A different smoker may not have the right metal surface. There’s also a stability note: a few owners say items can slide off if the bin is bumped, which is fair for an open shelf. Load the heavier items toward the back and it’s a non-issue. skip it if your model isn’t on the list.
Why cooks like them
- Two bins give you a two-shelf prep area on the hopper
- Magnetic mount means zero drilling and instant removal
- Rust-resistant metal holds up outdoors
Worth knowing first
- Fits only the listed Traeger models
- Open shelves, so items can shift if the bin gets knocked
Buy it for: Traeger owners who want tools and seasonings within arm’s reach without a side table.
Think twice if: your grill isn’t on the compatibility list or you prefer a closed drawer to an open shelf.
4. Subody Cldkz 2.0 RPM Auger Motor Replacement Parts
The feeder motor that stops your grill from starving the fire.
When pellets stop moving, the fire dies — and behind that is usually the auger motor, the small gearbox that turns the screw feeding pellets into the burn pot. This replacement runs at 2 rpm (two turns per minute), on 120V 60Hz with a 2-pole design, and it’s built with UL 1332/18AWG PTFE wire, a high-temperature sleeving that survives the heat inside a hopper. The housing is plastic but the unit weighs 0.81 kg, so there’s real heft to the gear assembly.
The practical selling point is that you can swap it without a technician. There are no special skills involved — you remove the old auger motor assembly and feeder gear motor and drop this in its place. The 2-pole setup holds stability under load, which translates to steadier temperatures while you’re smoking. The maker also flags its purpose in plain terms: the 2 rpm rotation drives the auger and helps cut clogging so your temp doesn’t wander.
Durability is the honest weak spot here, and it’s worth stating plainly rather than buried. The reviews split: the quality and ease of replacing it get the most praise, but a stretch of owners say theirs didn’t last and hummed loudly. Some of that depends on fuel: oversized or damp pellets are noted by the maker as a way to overload and kill the motor. Stick to standard 6mm pellets and clear leftover fuel after a cook. Also confirm your grill model: it fits Traeger (except PTG), Pit Boss (except PTG), Camp Chef, Oklahoma Joe, Cuisinart WoodCreek and Cabelas, including Traeger 070, 075, Texas Elite, Pro 22, Pro 34 and Lil Tex Elite.
Strongest argument for it: plug-and-play replacement at 2 rpm with PTFE wiring and a wide multi-brand fit list.
Where it asks something back: use fresh 6mm pellets and empty the hopper, or a jammed feeder can take the motor with it.
Pick this one if: your auger has quit and you want a like-for-like 2 rpm motor that installs without special tools.
pass on it if: you run a PTG, or your smoker model isn’t in the compatibility list.
5. COMVIEE Upgraded 2.0RPM Auger Motor Replacement Parts
A direct 1.6RPM replacement that feeds pellets with more authority.
If you’re replacing an aging 1.6 rpm auger motor, this is the direct upgrade. The 2.0 rpm speed runs the feed screw faster than a 1.6 rpm unit, which the maker says translates into steadier temperatures and less clogging while the auger runs. Both this and the Subody motor are 2 rpm, 120V and 0.81 kg — the distinction is the focus. This one is pitched explicitly as the stronger-power upgrade for older 1.6 rpm grills, so if your smoker was under-feeding to begin with, that’s the pitch to judge it on.
The wire spec is UL1332/18AWG Pep Special high-voltage, high-temperature resistance wire, with strict factory inspection behind it. That matters in a hopper where heat and vibration are constant. Installation is the same story as the rest of the category — plug-and-play, a few minutes of work, no technician. Compatible with Traeger (except PTG), Pit Boss and Camp Chef pellet grills.
Temper your expectations on longevity. Reviews repeatedly flag the internal gears failing after about 3 months, and value ratings split evenly between satisfied and disappointed owners. Those who had a good run rate it well; those who didn’t feel it wasn’t worth the spend. Some of that depends on installation and fuel quality, so be deliberate getting it seated. The people who like it most talk about following a YouTube guide to install and getting a better temperature hold once it’s in.
Best match for: an older 1.6 rpm grill that’s been feeding pellets weakly and needs a faster motor without extra wiring.
The one caution: the internal gears have a mixed track record, so keep it seated and running clean pellets.
6. VattaFrast Magnetic Pellet Cleanout Funnel for Smoker
The attachment that turns a pellet flavor change into a five-minute job.
Every pellet grill owner knows the worst part of switching from hickory to cherry is getting the old pellets out of the hopper without scattering them across the deck. This magnetic funnel clips onto the cleanout port and gives pellets a guided slide into a bin. It weighs 8 ounces, uses 6 built-in heat-resistant magnets to stay put, and fits hopper cleanout ports up to 4.5″ wide on flat mounting areas at least 5.8″ wide. No tools, no assembly.
The functional case is the strong one. It speeds up a flavor swap, empties the hopper fast to prevent auger clogs, and keeps the grilling area tidy. If you’re running multiple pellet types on the same smoker, this is the accessory that saves you the most frustration per cook. The magnets are the standout feature — owners highlight their strength — and the fit is described as perfect on compatible grills.
There’s an honest limitation worth naming. It’s designed to sit on the port, and a few owners mention it can get knocked off during use. Position it clear of the way you move around the grill and it stays; treat it as a tool you place and remove, not one that’s welded on. It works with Traeger, Pit Boss and most pellet grills, but check that 4.5″-port and 5.8″-mounting-area spec against your hopper before ordering.
What it solves: a clean, spill-free pellet change with a funnel that attaches in seconds and stores easily.
The trade-off: since it’s a removable magnetic piece, a bump during a cook can shift it — a placement problem, not a defect.
Reach for this if: you swap pellet flavors often and want to empty the hopper cleanly.
Check first: your cleanout port should be 4.5″ wide or less with at least 5.8″ of flat surface.
7. CaptainGrill Upgraded Grease Bucket with Lid & 12PCS Liners
A drip bucket that bolts on, seals up, and keeps the dog out of the grease.
Hanging grease buckets are a liability. They swing, they tip, and a full one hitting the patio is a mess you’ll remember. This one mounts with a screw-tightening support that locks the pail against the smoker, so taking the cover off doesn’t send it tumbling. It holds 0.42 gallons, measures 7.5″L x 7″W x 11″H, and arrives with 12 heavy-duty 0.42-gallon (1.6L) liners so disposal is a lift-and-toss rather than a scrub. The bucket is die-cast from alloy steel with a heat-resistant powder coating and is built to seal without a liner if you prefer.
The lid is the feature that separates this from every basic bucket. Grease is high in fat, and a fixed cover keeps pets away from the contents. It also blocks rain from turning the drip trap into a puddle and stops unwanted visitors getting in. For a household with a curious dog, that alone justifies the upgrade over a stock bucket.
Fit is the thing to verify. It supports pellet smokers with a 1.6″ square-tube side grease spout and is not compatible with the side cold-smoke box installed. Some customers note the mounting doesn’t hold as firmly as they’d like, so take the five-minute assembly carefully and don’t drill — the whole point is that it installs without holes and doesn’t void the warranty. If your smoker uses a hook-style spout rather than a square tube, look elsewhere.
Where the money goes
- Screw-tight mount replaces the tip-prone hook design
- Fixed lid keeps pets, rain and critters out of the grease
- 12 liners included, so cleanup is wipe-free for a long stretch
Before you commit
- Requires a 1.6″ square-tube side spout
- Not for smokers with the side cold-smoke box installed
- Some owners find the mounting less firm than expected
The smart upgrade for: anyone with dogs, rain exposure, or a hook-style bucket that keeps falling.
Confirm your spout: a 1.6″ square tube is the required fit — a hook hanger won’t work.
8. Unidanho Flame Broiler Kit for Pit Boss 850/820 Series
A rusted-out Pit Boss heat plate, replaced in stainless and built to sear.
A pellet grill that won’t sear usually has a warped or rusted flame broiler. This kit replaces both halves: the bottom plate (a match for Pit Boss part 74519) at 15 ½”W x 26″L, and the slide cover (a match for 74518) at 15 ½”W x 10″L. Both are heavy-wall stainless steel rather than the thinner standard steel on the originals, which is exactly what decides whether a heat plate survives another few seasons of high heat.
The design purpose is direct flame control. There’s no airgap between the main plate and the slider cover on this kit, so you get more flame control and even heat distribution for a true sear, without the ash buildup or the bad hot spot that a worn plate creates. If your smoker has been leaving one side of the grate hot and the other cold, a fresh plate is the mechanical fix. It’s also priced well under the alternative of buying a whole new grill.
Check your model before clicking buy. This fits the Pit Boss 820 and 850 families, including the 820 Deluxe, 820D3, 820FB, 820FBC, 820ME, Sportsman 820, 820 Matte Black, PB820CS1, PB820FB1, PB850CS1, Pro Series 820PS1 (Lowe’s), Pro Series 2 850PS2, Navigator 850 and 850G. The flame broiler lever is not included, so reuse yours if it’s still healthy. Sizing runs to 26″L x 15.5″W x 4.3″H overall. Fit and quality carry the reviews here — the stainless is reported to hold up and resist rust, and it’s a mechanically simple swap. Owners appreciate getting a Pit Boss back to searing for a fraction of a new grill’s price.
Why it’s the searing fix: heavy-wall stainless at 26″L x 15.5″W, with a gasket-free plate-to-cover fit that tightens flame control.
The catch: it’s a model-specific kit — if your Pit Boss isn’t an 820/850 series, this won’t bolt in, and the lever isn’t in the box.
Choose this when: your Pit Boss 820/850 won’t sear and a new plate is cheaper than a new grill.
it’s not for you if: you own a different Pit Boss series or need a broiler lever included.
9. Unidanho Grill Insulated Blanket for Traeger Woodridge Pro
A thermal jacket that lets a Woodridge run low and slow when it’s freezing.
Cold weather fights the fire in a pellet grill — heat escapes, the controller over-corrects, and you burn through pellets just trying to hold temperature. This blanket sits over the cook chamber to trap that heat. It’s built from a ceramic fiberglass inner with fiberglass fabric on both the front side and backing side, giving three layers of insulation, and the maker ties that directly to reduced pellet consumption and steadier temps in winter.
Temperature retention is the thing everyone praises — the kind of cold-weather performance where a brisket still comes out right while the outdoor thermometer sits below freezing. It’s made specifically for the Traeger Woodridge Pro TFB97JLH and Woodridge Elite TFC97XLH, so this is not a universal cover. The 22 magnets are screwed into the edge, which means they’re a physical fixing rather than a sewn-in strip — you drape it over and let them click. Total weight is 3.14 kg, so it’s a substantial piece of kit.
Here’s the honest catch, and it’s why this one is a specialist pick rather than a universal one. Magnets keep it in place but they aren’t the strongest, and a few owners flag durability as a concern on the seam side of things. This is a good secondary accessory for serious cold-weather cooks on a compatible smoker — not a first purchase. It carries 4.0+ stars across 270+ ratings, which fits a genuinely useful but niche cold-weather blanket.
Best for: Woodridge Pro or Elite owners who smoke through winter and want to keep the cook chamber stable.
The caveat to weigh: it only fits those two model lines, and the magnets hold but aren’t forceful — check your fit before committing.
Know the Specs
RPM on an auger motor
RPM means revolutions per minute — how many times the auger shaft turns in one minute. A 2 rpm motor turns the feed screw twice a minute, which controls how many pellets reach the fire. Too slow and the fire starves; too fast and you flood the pot. Match the RPM to the motor you’re replacing, and note that a 2.0 rpm motor is a common upgrade from a 1.6 rpm unit for grills that feed too weakly.
Fabric denier and gauge number
Denier and gauge both look like random numbers but they’re the key to durability. On a grill cover, the 1000D figure is cloth thread weight — a higher denier gives a denser, tougher sheet. On a fire burn pot, the 14 gauge figure describes steel wall thickness, with a higher gauge generally meaning thinner steel. Both numbers tell you how long a part will take abuse.
Magnet count and placement
Magnets are how a removable accessory stays on a hot, vibrating smoker. On these blanket and funnel listings, the count of heat-resistant magnets (22 on the blanket, 6 on the funnel) tells you how firmly it stays. Magnetic strength matters too — a strong magnet that holds against wind and a bump is the difference between a helper and a nuisance. Check whether the magnets are screwed in or sewn in.
Burn pot dimensions and hot rod depth
A burn pot is defined by its dimensions and hole count, which control airflow to the fire. The 5″ x 3 1/2″ x 3 3/4″ pot with 7 air holes in this guide is one example. The hot rod’s install depth is equally important: the maker specifies protruding 1/8 to 1/4 inch into the pot. Get that depth right and the grill lights reliably; miss it and you’ll be troubleshooting forever.
Common Questions
Will the GuardKove cover fit a Traeger Pro 575?
How do I know which burn pot fits my grill?
Do I need a 2.0 rpm auger motor or a 1.6 rpm one?
Can the magnetic storage bins hold a full plate?
Is a thermal blanket worth it for winter smoking?
What size grease spout does the CaptainGrill bucket need?
Does the cleanout funnel fit a Pit Boss hopper?
Will the flame broiler kit fit my Pit Boss 820?
How do I stop my auger motor from clogging?
Which accessory should I buy first for a new pellet grill?
The Bottom Line
For most grill owners, the wood pellet grill accessory that earns its place first is the GuardKove 1000D Grill Cover, because 1000D Oxford fabric with three-layer waterproofing protects the whole smoker instead of one part. It holds the strongest record of the picks here — 4.5+ stars across 600+ ratings — and the fit and durability feedback backs the spec sheet. If your grill won’t light, the COMVIEE Fire Burn Pot and Hot Rod Kit replaces the full ignition path in one box. For a Pit Boss that won’t sear, the Unidanho Flame Broiler Kit is the parts swap that gets you grilling again. Start with the cover, then fill in the pieces your grill actually needs.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





