Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
If you only buy one thing for boring clean holes in wood, buy a set with real cutting spurs and a shank that will not spin in your chuck. Everything else is detail. The nine sets below cover the whole job — flat spade bits for fast rough holes, auger bits for deep nail-riddled lumber, and Forstner bits for flat-bottomed hinge pockets.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Wood boring bits are consumables, so the right set depends on what you drill and how often. Every pick here has been checked against the maker’s own specs and owner feedback, giving you a straight read on the best wood boring drill bits for your bench.
Top Picks



How To Choose The Best Wood Boring Drill Bits
The first split you make is by job, not by brand. A spade bit rips a fast, ugly hole through a stud. An auger bit bores a deep, straight channel through stacked lumber. A Forstner bit carves a flat-bottomed pocket for a hinge. Buying the wrong type for the job wastes more money than buying the wrong brand.
Match the bit type to the hole you need
Spade bits — flat paddles with a pointed tip — are the fastest way to open a rough hole for pipe or cable. Auger bits carry deep flutes that pull chips out of a deep bore, so they do not clog halfway through a thick beam. Forstner bits cut a rim first and then shave the floor flat, which is the only way to sink a hinge without tear-out.
Shank type decides whether the bit spins
A hex shank (six flat sides that lock into a chuck or quick-change holder) grips harder and resists slipping. A grooved hex shank adds a notch that stops the bit walking out of an extension. Round shanks work fine in a three-jaw drill chuck but are the wrong fit for an impact driver.
Spurs, tips, and breakout
Double-side cutting spurs score the outside of the hole before the paddle lifts the waste, which is what keeps the wood from splintering on exit. A threaded self-feed tip pulls the bit into the wood without you leaning on the drill. Both matter more than the brand name on the pouch.
Side-by-Side Comparison
| Model | Best For | Piece Count | Cutting Diameter | Shank Type | Amazon |
|---|---|---|---|---|---|
| DEWALT Extreme Flat Wood Bit 9 Piece Set★ Best Overall | Impact-driver work with nails in the wood | 9 | 12 mm | 1/4″ round | Amazon |
| KENDO Spade Drill Bit SetBest Starter Set | First spade set on a tight budget | 13 | 0.75 inches | Hex | Amazon |
| Milwaukee 49-22-0175 Quik-Lok SetBest Reach | Reaching deep spots with an extension | 1 | 1.13 inches | Quik-Lok | Amazon |
| BOSCH DSB5013P Daredevil Set | Fast, clean holes across a wide size range | 13 | 0.25 inches min. | Hex | Amazon |
| DEWALT DW1687 Ship Auger | Deep bores through nail-embedded lumber | 1 | 1 inch | 7/16″ ball groove | Amazon |
| ASNOMY 6PCS Forstner Bit Set | Large flat-bottom pockets for hinges | 6 | 1.38 inches min. | Round | Amazon |
| Diablo Auger Bit 3-Piece Set | Framing and decking through nail-laden wood | 3 | 1 inch | 7/16″ hex | Amazon |
| IRWIN Speedbor Blue Groove Pro Set | Clean-cut spade work in a tough case | 8 | 0.25 inches min. | Grooved hex | Amazon |
| Wood Owl 6 Piece OverDrive Set | Ultra-smooth auger cuts with minimal blowout | 6 | 1.25 inches | Round | Amazon |
Detailed Reviews
1. DEWALT Extreme Flat Wood Drill Bit 9 Piece Set
Our pick — 4.5+★ from 750+ verified ratings; the strongest balance of quality and price.
Nine flat bits from 12mm to 32mm that survive an impact driver and nail-riddled lumber
This is the set that earns the top spot because it covers the widest practical range in one case. The nine flat bits run 12, 14, 16, 18, 20, 22, 25, 28 and 32mm, so you go from a small cable hole straight up to a fat pipe bore without switching sets. That spread is why it is the crowd favorite — 4.5+ stars across 700+ owners.
The detail that matters for daily use is the build. The extra-thick steel shank is made to take impact-rated abuse, and the 1/4″ shank is shaped for easy, slip-proof clamping in your drill. High carbon steel keeps the edge working through hardwood, softwood, lumber, and wood with nails in it. If you drill door locks, mortises, electrical runs, or plumbing holes, this is the setup that covers all four.
Storage is where a lot of sets fall apart. This one clicks into the TSTAK system, so the bits stack with your other DEWALT accessory cases instead of rattling loose in a drawer. The item highlight backs that up: modular storage and fast bit access built in. That is the feature that keeps a busy bench organized when you are switching between sizes all morning.
What earns the top slot
- Nine flat bits covering 12mm to 32mm in one case
- Impact-rated, extra-thick steel shank for nails and hard lumber
- TSTAK-compatible case stacks with your other accessory sets
- High carbon steel holds up across hardwood and softwood
Where it asks for care
- Metric sizing only — no imperial markings on the bits
- The 1/4″ round shank is not the quick-change fit some impact drivers prefer
Go for this: you want one case that handles lock installation, electrical rough-in, and plumbing holes with impact-rated steel.
Think twice: you only drill imperial-sized holes and want inch markings printed on every bit.
2. KENDO Spade Drill Bit Set, 13-Piece Alloy Steel Woodworking
Thirteen heat-treated spade bits from 1/4″ to 1-1/2″ for around the price of a single name-brand bit
If you are filling a starter shop on a budget, this is the set that gives you the most sizes for the least outlay. Thirteen spade bits run from 1/4″ up to 1-1/2″ — that covers just about every rough hole a home woodworker needs. Where the BOSCH set below gives you thirteen bits starting at a 0.25-inch bore, this KENDO set stretches the same piece count out to the full 1-1/2″ top end.
The bits are alloy steel, fully heat-treated to a hardness above plain carbon steel. The polished head resists wear for a longer service life. Double-side cutting spurs grab the wood and carve it away, which is what keeps breakout down and gives you a cleaner hole. The bits are rated for wood, fiberglass, plastic, and PVC.
What wins people over here is the overall quality of the set — the fit and finish feel above the price tier. Sharpness and functionality show up in the feedback too, and the nylon pouch keeps everything sorted. As a first spade set, it does the job without asking you to spend like a pro.
What buyers notice: the bits come decently sharp and hold an edge, with the laminated particle board work getting called out specifically as a good result.
The honest read: this is a starter set, not a lifetime tool. The heat treatment is solid for the tier, but if you drill daily through hard lumber, expect to graduate to a forged set down the road.
Suits you if: you want the full spade size range in a pouch without a big spend on your first kit.
Pass if: you need impact-rated bits for an 18V driver on every job.
3. Milwaukee 49-22-0175 8-Piece Quik-Lok Spade Bit Set
The set that gives you extra bit length when the hole sits deep inside a cabinet or joist bay
The reason to pick this Milwaukee set over a plain pouch of spades is the Quik-Lok system. It lets you change accessories fast and hands you extra bit length for hard-to-reach areas — the difference between reaching a hole deep inside a stud bay and giving up on it. The extension is the part owners lean on most, and it earns its keep on tight jobs.
On the cutting side, double wing spurs keep vibration down and stop breakout, so the hole forms cleanly. The patented cutting edge clears chips fast, pulling heat away from the bit. That is the design that makes it bore easier and faster than a plain paddle. Cobalt steel gives it a tougher edge than basic carbon.
The weight tells you it is a serious tool: 16 ounces against the 4.16 ounces of the BOSCH Daredevil set — noticeably heavier in the hand and in the case. That heft comes from the sturdier build, and it is exactly what makes this the pick for the hard-to-reach bore rather than the light-travel pouch.
Where it shines: the performance and durability of the bits are what owners talk about most, with the carrying case and the extension both drawing steady praise.
Watch the release: the bit removal mechanism is a mixed story — the quick-release can detach itself and bits go missing. It is worth checking the lock is seated before you drill.
Best match for: anyone drilling through stacked lumber or deep inside framing where reach is the whole problem.
Look elsewhere if: you want a large spread of sizes — this is a focused set built around the Quik-Lok extension.
4. BOSCH DSB5013P 13-Piece Daredevil Spade Drill Bit Set
Thirteen Daredevil spades from 1/4″ to 1-1/2″ that cut like butter and fit an impact driver
For most home and job-site drilling, this is the set that does the boring. Thirteen spade bits run from 1/4″ to 1-1/2″, and the hex shank locks into an impact driver so you can run it on your cordless gun. The full-cone threaded tip bites and pulls itself through, which is why these spades drill fast enough to leave you watching the hole open rather than leaning on the drill.
Hole quality is where the design pays off. Spur and reamer tips score the wood first and reduce breakout, so you get a cleaner rim on both sides. The contoured paddle pulls chips out fast, and the bits are oxide coated. At 4.16 ounces for the whole 13-piece set, it packs into a bag without weighing you down — that is part of why it is the favorite travel set.
The mixed note is durability, and it is worth sizing honestly. These are consumable spade bits; run them hard through nails or hard lumber and some buyers report breakage on first use. Used on clean wood with a steady hand, the sharpness and speed keep most buyers happy.
What wins people over: quality and cutting performance dominate the feedback — the bits cut through wood like butter and work well with impact drivers.
Set your expectation: at this price tier you are buying speed and clean holes, not indestructible steel. Keep them away from nails and they last.
Right for you if: you want a light, wide-ranging set that runs fast in an impact driver on clean wood.
Not the pick if: you routinely drill nail-embedded lumber — reach for an auger bit instead.
5. DEWALT Drill Bit, Ship Auger, 1 Inch x 17 Inch (DW1687)
A single 17-inch auger that bores a straight 1-inch channel through stacked lumber and nails
Pick this when your hole is deep and the wood is not clean. The DW1687 is a 1-inch ship auger that runs 17 inches long, so it reaches through a thick beam in one pass. The self-feed spur pulls the bit into the wood, and hardened alloy steel carries it through for long bit life. Three flutes clear the chips so the bore does not stall out halfway.
The comparison that matters: this one measures 18.25 inches overall against the BOSCH Daredevil set at 0.35 inches — you are trading compact storage for real depth. The 7/16″ ball groove shank makes for quick bit changes, and the hardened alloy steel earns its keep in nail-embedded wood.
What it does well is drill. Owners reach for it for stumps and deep bores, and sharpness is a steady positive. Durability is the honest caveat — some report it breaking after fewer than 100 holes, so treat it as the right tool for occasional deep work rather than a hammering bit.
Why it earns a spot
- 17-inch length reaches through thick stacked lumber
- Self-feed spur pulls the bit into the wood
- Hardened alloy steel built for nail-embedded wood
- 7/16″ ball groove shank for quick changes
What to know first
- Single 1-inch bit — no size range in this purchase
- Durability is uneven on hard, continuous runs
Pick it when: a single deep 1-inch bore through a nail-riddled beam is the job in front of you.
Skip the buy if: you need a spread of hole sizes — this is one dedicated auger, not a set.
6. ASNOMY 6PCS Large Size Forstner Bit Set
Big Forstners that sink a flat-bottomed pocket for a hinge without chipping the rims
When you need a pocket, not a through-hole, this is the set that gives it to you. These are large Forstner bits — a 1.38-inch minimum bore diameter up to 2-3/4 inches — so they open the wide, flat-bottomed pockets a door hinge or a wide dowel needs. The BOSCH Daredevil set starts at a 0.25-inch bore, so this ASNOMY set is the tool for the big end of the size range.
The cutters are tungsten carbide tipped, and the body is solid hardened steel for rust resistance and a sturdy build. The design drills precise flat-bottom holes with no chipping in hard or soft wood, with a drilling depth up to 2-3/8 inches. They also handle plastic, plywood, MDF, and sandwich panels, which makes them useful for furniture and desk work.
The buyer tip from the maker matters here: these large Forstners want a fixed machine — a drill press or bench drill — for the best hole. In a hand drill, use a high-power gun and clamp the work with a vise. Run them loose and you will not get the clean opening these are built for.
What owners mention: they make excellent holes in oak and are called out as perfect for lathe work, so the clean-cut promise holds on real hardwood.
The real trade-off: large Forstners fight a hand drill. A drill press is close to required for clean results, so budget for a stable setup too.
Choose this if: you are cutting hinge pockets or lathe work and want carbide edges in the big sizes.
Not for you if: you work only with a handheld drill and no press or vise.
7. Diablo Auger Bit – 7/16″ Hex Shank – 3-Piece Set
Three auger bits that pull themselves through nail-laden wood and keep their edge
Here is the set for the job where nails are a given. Three auger bits come in 5/8″, 3/4″, and 1″ sizes, and the self-feeding Dura-Tip design draws the bit smoothly through wood, including nail-embedded pieces. Dual cutting edges are built to hold sharpness even in tough, nail-laden lumber, and deep flutes throw chips out fast so the bore stays clog-free.
The 7/16″ hex shank fits a range of impact drivers and drills, so it slides between your cordless tools without a special adapter. High speed steel gives it the edge endurance to take on framing, decking, and heavy-duty construction work without constant resharpening.
Where the DEWALT ship auger above is one long single bit built for a deep bore, this Diablo set gives you three sizes for a range of framing holes. The honest caveat is wear on heavy runs — some report the bits get chewed up quickly in hard use, so treat them as a working-rotation set rather than a lifetime buy.
The case for it
- Three sizes — 5/8″, 3/4″, and 1″ — for framing and decking
- Self-feeding Dura-Tip pulls the bit through nail-embedded wood
- 7/16″ hex shank fits a range of impact drivers
- Deep flutes keep the bore clog-free
What wears first
- Edge and durability numbers thin out on hard, continuous runs
- Value is debatable for years of daily use
The set for you if: nail-laden wood and framing work are your everyday grind.
Look past it if: you need a one-bit deep bore and want to save the case space.
8. IRWIN Tools Speedbor Blue Groove Pro Spade Bit Set 8-Piece
Eight spade bits built to scribe a clean rim before the paddle clears the waste
If a splintered rim is the thing that ruins a job for you, this is the set to look at. The Blue-Groove point and cutting edge clear chips fast, and double-cutting spurs scribe the outside of the hole to keep breakout down. That is why owners say the outer edge gives a nice clean cut.
The build leans toward durability. A large shank on the flat bit design adds strength, and the grooved hex shank resists slipping in the chuck or a bit extension — the small detail that keeps the bit tracking straight in a deep bore. The eight bits cover a useful spread, and the molded ABS resin Pro Set case keeps them sorted and protected.
You get steady, clean holes here rather than raw speed. The edge holds up in softer material: it drills through sheet-rock (drywall) without dulling or burning. Eight pieces cover the core sizes without the bulk of a bigger kit.
Where the value sits: the case quality and the size selection earn steady praise, alongside how cleanly the bits cut.
The trade-off: an eight-piece set covers the common holes but leaves out the tiny and the top-end sizes some jobs want — check the size list before you buy.
Made for: the woodworker who wants scribed, breakout-free holes in a tough ABS case.
Better to pass if: you need the full 1/4″ to 1-1/2″ spread in one purchase.
9. Wood Owl 6 Piece Set OverDrive Auger Boring Bits
Six auger bits that leave a clean exit hole with almost no blowout on the back side
This is the set for the woodworker who cares about what the far side of the hole looks like. Six auger bits run 1/2″, 5/8″, 3/4″, 7/8″, 1″, and 1-1/4″, all 6-1/2 inches long. The brad point and chamfered lead-in edge give a smooth start and a fast cut, and the design produces minimal blowout on exit holes — the clean-exit promise that drives the price here.
What lands with people is how cleanly these cut. They carve crisp surfaces without tear-out, cut fast, and leave you with a hole that does not need sanding before a plug goes in. Induction-hardened steel and precision-ground cutting edges hold accuracy and edge life.
The maker also claims these bits can extend cordless drill battery life by as much as 35%. The honest flip side is the price tier. This is the premium set on this list, and it is built for the bench woodworker who values a clean exit over big-kit convenience.
What drives the price
- Brad point and chamfered lead-in for smooth starts
- Minimal blowout on exit holes
- Induction hardened steel with precision ground edges
- Six bits from 1/2″ to 1-1/4″, all 6-1/2″ long
Where you pay up
- Top of the premium tier — a splurge for pure rough-hole work
- That 35% battery-life figure is the maker’s claim, not a tested number
Pick this when: a clean exit hole matters and you want your cordless drill to work less.
Think first if: you only rough out stud holes and never see the back side.
Know the Specs
Shank type
The shank is the part that goes into the drill — the grip end. A hex shank has six flat sides that lock into a chuck or quick-change holder, which keeps the bit from spinning. A grooved hex shank adds a notch that stops the bit walking out of an extension. A round shank needs a three-jaw chuck and is the wrong fit for an impact driver.
Spurs and points
Cutting spurs are the little ears on a spade bit that scribe the outside of the hole first, reducing breakout. A threaded or self-feed tip pulls the bit into the wood so you do not have to lean on the drill. A brad point centers the bit on a flat spot for a smooth start. These tip designs matter more than brand for hole quality.
Bit type
Spade bits are flat paddles for fast rough holes. Auger bits use deep flutes to clear chips out of a deep bore and often handle nails. Forstner bits cut a rim first and then shave a flat floor, so they are the pick for hinge pockets. Match the type to the hole, and the brand matters less.
Cutting diameter and sizes
Cutting diameter is the width of the hole the bit produces. A set that runs from a small bore to a large one covers more jobs. Check the size list before you buy — a focused three-piece set is right for one job, while a wide thirteen-piece set covers the bench.
Common Questions
Will these bits fit an impact driver or only a standard drill?
What is the difference between a spade bit and a Forstner bit?
Can these bits drill through nail-embedded wood?
Do I need a drill press for large Forstner bits?
What does breakout mean and why do spurs reduce it?
How long do wood boring bits stay sharp?
Is a hex shank better than a round shank?
What sizes should a starter spade bit set include?
Why do auger bits cost more than spade bits?
Can I use these bits on plastic and PVC?
The Bottom Line
For most people, the wood boring drill bits winner is the DEWALT Extreme Flat Wood Bit 9 Piece Set because it spans nine sizes from 12mm to 32mm in an impact-rated, TSTAK-friendly case. If you drill nail-embedded lumber, grab the Diablo Auger Bit 3-Piece Set. And for a flat-bottomed hinge pocket, the ASNOMY Forstner Set is the one to reach for.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





