Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your windshield is a mess, you pull the stalk, and nothing comes out — or worse, a weak dribble that smears the grit instead of clearing it. The fix is usually a cheap electric pump tucked into the washer fluid reservoir, not a trip to the dealer. This guide ranks the replacement pumps that actually fit, seal, and spray, so you can pick the right one for your vehicle in a few minutes.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Fitment is the whole ballgame here: a pump with the wrong connector or nozzle count is useless, no matter how well it’s built. Below you’ll find real numbers on weight, speed, and application lists, plus what actually goes wrong on these parts after the install.
Every pick below was checked against its application list, its OEM interchange numbers, and the plumbing it ships with, so you can choose a windshield washer water pump that sprays on the first try.
Top Picks



How To Choose The Best Windshield Washer Water Pump
The washer pump is a small 12-volt electric motor that pushes fluid from the reservoir through a hose to the nozzles. It burns out, seizes, or starts leaking, and the whole system stops. You are not buying an upgrade here — you are buying the part that makes the spray come back exactly like it was.
Match the interchange number, not the marketing name
Every listing will shout the vehicle models it fits, and those lists are often incomplete or sloppy. The reliable anchor is the OEM interchange number — the factory part code this pump is built to replace. Cross-check your old pump’s number against the pump’s OEM number list before you buy anything.
Count your hose connections and nozzle setup
Some pumps feed one hose; some feed two. Vehicles with a rear wiper often use a dual-nozzle arrangement. If you buy a single-connection pump for a two-hose car, you’ll be capping off a line or sending fluid to a nozzle that never arrives. Look at the pump you’re removing and count what’s plugged into it.
Check whether the grommet comes in the box
The grommet is the rubber ring that seals the pump body into the plastic reservoir. It’s a two-dollar part that decides whether you have a dry driveway or a puddle under the hood. Some pumps ship with a fresh grommet and some don’t — verify before you order, because reusing a hardened old seal is how leaks start.
Expect a quick job, not a shop visit
These are plug-and-play parts. Most sit behind a front fender liner or under the reservoir with a retaining clip, and the electrical connector pushes straight on. A wrench, a few minutes, and a little patience with the reservoir fluid level is all a straight swap usually asks.
Side-by-Side Comparison
| Model | Best For | Fitment Coverage | Item Weight | Included Sealing | Amazon |
|---|---|---|---|---|---|
| Motorcraft WG311★ Best Overall | Factory-correct Ford replacement | Vehicle specific (OEM 7R3Z17664A) | 1.5 lb package | Washer pump only | Amazon |
| 104307 Peterbilt / Kenworth PumpBest for Big Rigs | Heavy-duty truck models | Kenworth T680, T880; Peterbilt 320–579 | 0.07 kg | Pump only | Amazon |
| A ABIGAIL A75008WPWidest Ford Coverage | Broad Ford / Mazda / Mercury coverage | Escape, Focus, F150, F350, Ranger, B-series | 3.2 oz | Includes grommet | Amazon |
| Tostmolt TTWP-WRAN07 | Multi-brand European and domestic coverage | Chevy, BMW, Audi, VW, Jeep, Ram and more | 4.2 oz | Includes grommet | Amazon |
| TRICO 11-513 | Classic GM trucks and cars | Buick, Chevy, GMC, Cadillac listings | 1.28 oz | Pump only | Amazon |
| ACI 174347 | OE-grade metal-bodied replacement | Replaces 48247, 8695, 11528, 67-23 | 4.32 oz | Pump only | Amazon |
| ACDelco 84518407 | GM original equipment match | OEM part 84518407 | 3.04 oz | No grommet included | Amazon |
| Genuine Hyundai 98510-2V100 | Hyundai factory motor and pump assembly | Hyundai OEM fit | 0.159 kg package | Assembly part | Amazon |
Detailed Reviews
1. Motorcraft WG311 Washer Pump
Our pick — 4.5+★ from 300+ verified ratings; the strongest balance of quality and price.
The factory part for Ford owners who want the spray back exactly as it left the line.
If your vehicle carries a Ford-family factory washer setup, the shortest path back to a clean windshield is the part the factory already used. This is Motorcraft’s WG311, a genuine OE washer pump with the OEM equivalent part number 7R3Z17664A stamped into its interchange listing. That means it drops into the reservoir as a direct replacement rather than a “close enough” fit. The crowd backs it up, holding 4.5+ stars across 300+ owners.
What wins people over is the compatibility — the pump slots in where the dead one came out and the connector lines up without a fight. Durability is the other story buyers keep telling: buyers report the same pump still running after 8 years, well past the typical life of a generic aftermarket unit. Installation is described as a few-minutes job, not an afternoon under the hood.
The catch is small but real. This ships as the washer pump only, so if the rubber grommet sealing it to the reservoir is hardened or torn, you’ll want a fresh one on hand before you start. It’s also built specifically for its listed Ford applications — if your vehicle isn’t among them, this pump is the wrong shape entirely, no matter how good the reputation.
Where it earns its keep
- Genuine Motorcraft part with OEM equivalent 7R3Z17664A for a true direct replacement
- Owners mention one pump still running after 8 years
- Straightforward install that takes a few minutes in most cases
- Vehicle specific fit keeps the connector and reservoir seating honest
Before you turn the wrench
- Ships as the pump alone — no grommet in the box
- Only fits the Ford-family applications it’s listed for
- Carries a 30-day manufacturer warranty, so inspect the part on arrival
Reach for this if: you drive a listed Ford-family vehicle and want the factory-correct pump with the longest durability record here.
Think twice if: your old grommet is brittle — order a replacement seal alongside it so the job finishes in one pass.
2. 104307 Truck Windshield Wiper Washer Fluid Pump
A heavy-truck pump built to shrug off road salt, dust, and long-haul temperature swings.
Class 8 trucks live a rougher life than passenger cars, and their washer pumps sit in the same weather as the rest of the nose. This Earthtec unit (part 104307, also listed as HLK7046 and T4695001) is built from high-strength plastic with internal components rated for waterproof, dustproof, and weather-resistant duty. The application list is the point: Kenworth T680 and T880 from 2013 to 2019, plus a long roll of Peterbilt models spanning 320 through 579.
Reliability is what carries this one with truck owners, and the fit confirms the numbers on the listing match the trucks in the yard. The plug-and-play structure means the harness connector and fluid line seat without cutting or adapting anything, which keeps a roadside repair short. At 0.07 kg it’s a light part that ships and handles easily.
Here’s the honest side: this is a fit-specific part, and a handful of buyers have run into leakage at the seal after install. It’s the recurring trade-off on this pump, and it usually traces back to the reservoir grommet rather than the motor itself. If your truck is a Kenworth or Peterbilt on the list, it’s a sound choice — if it isn’t, look elsewhere.
What truckers value: the OE-equivalent fit and the weather-rated housing, which is exactly what a hood-mounted pump on a long-haul tractor needs.
The one watch-out: leakage at the reservoir seal has been the recurring report, so check the grommet and seat the pump fully before you call the job done. A 3-month warranty backs the part.
Built for: Kenworth and Peterbilt operators who want the OEM-equivalent pump and a housing that tolerates road conditions.
Not the one for: passenger cars — the fitment is truck-specific and won’t cross over.
3. Windshield Washer Pump w/Grommet
Eight OEM cross-references and a grommet in the box — the broadest Ford-family swap here.
This is the pump to grab if you drive a Ford Escape, Focus, F150, F250, F350, Mustang, Ranger, or Taurus, or a Mazda B2300 through B4000, or a Mercury Monterey or Mariner. The A ABIGAIL pump carries eight OEM interchange numbers — 7R33-17664-DA, 7L8Z-17664-A, F6SZ-17664-A, WG-315, and four more — so there’s a strong chance one of them matches the pump you’re pulling. According to buyers, it “works exactly like the original and is easy to install.”
Functionality is what sells it, and it isn’t close: customers note the spray comes back exactly as it was, with the whole swap finishing in under five minutes for many. The grommet ships in the box, which takes the seal problem off your plate. At 3.2 ounces and with a package measuring 3.46 x 2.24 x 1.77 inches, it’s compact enough to store as a spare and light enough to ship cheaply.
The honest trade-off is at the wiring end. Some buyers found the electrical connection didn’t align exactly the way the factory part does, and a few report durability falling short over time. Those are fit and build variations rather than universal problems, but if your harness is tight on space it’s note before you commit.
Value read: eight interchange numbers plus a grommet covers the widest Ford, Mazda, and Mercury range in this list, and the install is genuinely quick.
The fit note: if your connector sits in a cramped spot, test the electrical plug before you push the pump fully home — alignment is the one recurring gripe.
The smart pick for: any Ford-family owner who wants a grommet included and the broadest interchange coverage available.
skip it if: your wiring harness is unusually tight — check the connector seating before you commit.
4. Front/Rear Windshield Washer Fluid Pump Motor
The one that covers Chevy, BMW, Audi, VW, Ram, and Jeep in a single part number.
Most pumps on this list serve one brand family. The tostmolt TTWP-WRAN07 serves an entire cross-section, with 24 OEM cross-references spanning 11-613 and 13250357 through 95562817200. If you drive a Chevy, Buick, Jeep, Chrysler, Dodge, Ram, Mitsubishi, Mazda, Mercury, Ford, Smart, Mini, BMW, Mercedes-Benz, Porsche, Audi, or Volkswagen model that matches, this one is likely your pump. The listing specifically calls out vehicles with a rear wiper, so if you have one, read the special note before you buy.
The motor is built from OE-grade material and comes with a rubber grommet in the box, so you get a fresh seal without ordering separately. At 4.2 ounces versus the 1.28-ounce TRICO 11-513, it points to a more substantial motor housing. The package measures 4.57 x 3.03 x 2.17 inches, versus 3.46 x 2.24 x 1.77 inches for the A ABIGAIL’s box.
Functionality and fit are the strengths: the spray returns, the grommet seats, and the install is quick. But compatibility is a genuine split here — some buyers find the pump isn’t identical to their OEM part, and several note it only has one hose connection where their vehicle expected two. If you have a rear wiper with a second line, verify the connection count before you order.
The real draw: 24 OEM references and a fresh grommet in the box, all under a limited lifetime warranty against manufacturer defects.
Where to double-check: the single hose connection. Cars expecting dual lines will need a different pump.
Best fit: multi-brand garages and owners of BMW, Audi, VW, or domestic models who want one pump that could cover several vehicles in the driveway.
Hold off if: your setup uses two fluid lines to the nozzles — this pump runs one.
5. TRICO Spray Windshield Washer Pump 11-513
The lightest pump on the list, aimed squarely at decades of GM trucks and sedans.
TRICO’s 11-513 is a specialist’s tool. Its application list reads like a GM history book: 1999-2006 Chevy Silverado 1500, 2001-2006 Silverado 2500 HD, 1988-2004 Chevy S10, 1988-2021 Camaro, 1995-2006 Tahoe, 1996-2020 Express 2500 and 3500, 1999-2006 GMC Sierra 1500, plus Buick, Cadillac, and GMC entries. If your garage is a GM truck or a long-running Camaro, this is the pump that was built for you.
At 1.28 ounces it’s the lightest pump here — versus 4.2 ounces for the tostmolt unit — with a molded plastic body instead of a metal alloy housing. TRICO states no cam to align, no holes to drill, and no fitting adjustments; the pump fits snugly without the work. It survived a freezing event according to buyer reports, which matters if you live where the reservoir gets cold.
Fit is the honest caveat. Most reviewers point out perfect seating, but some specific applications — a 2008 Cadillac Escalade Base was called out — don’t line up, and the pump’s hose length is a reported issue on certain vehicles. If the GM listing matches your exact year and model, the fit is right; if it doesn’t, this pump won’t be the right one.
Why it works for GM owners
- Application list covers Silverado, S10, Camaro, Tahoe, Express, and Sierra across decades
- Lightest pump here at 1.28 ounces with a resilient plastic build
- No alignment, drilling, or fitting adjustments per TRICO
- Shoppers say it kept working even after a freezing event
Where it doesn’t fit the bill
- Fit is mixed on specific trim levels — verify year and model coverage before ordering
- Hose length has been an issue on certain vehicles
- Plug compatibility varies by GM year, so match the listing carefully
Buy this one if: your vehicle appears on the Silverado, S10, Camaro, Tahoe, or Sierra applications for the year that matches yours.
Check carefully if: you drive a trim — like the 2008 Escalade Base — that sits outside the fitment list.
6. ACI 174347 Windshield Washer Pump
An alloy-steel replacement pump for the buyer who wants OE-grade guts under the hood.
ACI designed the 174347 to match original equipment washer pumps, and the material specs back that claim: an alloy-steel body with a black oxide or zinc exterior finish, graded as original equipment or standard. That metal housing makes it the heaviest of the conventional picks at 4.32 ounces — but it’s the build durability people buy this pump for. It replaces OE part numbers 48247, 8695, 11528, and 67-23, so check yours against that list first.
The installation write-up is short and sweet. The pump drops in as a direct replacement, many owners finishing in under two minutes, with fit reported clean across the applications. Functionality carries the reputation here, and it’s the strength people return for — the motor fires and the spray comes back without a fight. Value for money also surfaces repeatedly, which is fair given what an OE-grade metal body usually costs.
Two things to sort before you buy. Leakage at the seal is a recurring report here, and pump power comes up as a mixed note — some buyers find the spray force isn’t quite what their original delivered. If your reservoir seal is old, buy a fresh grommet and seat the pump carefully, and the leakage issue is far less likely to show up.
The metal-body case: alloy steel, OE grade, and a direct-fit design that goes in from the reservoir in two minutes for most owners.
Two honest notes: seal leakage shows up as a recurring issue and spray force is described as mixed — both manageable with a fresh grommet and a careful seat.
The right fit for: owners who value an OE-grade metal housing over the lightest possible pump body.
Look elsewhere if: maximum spray pressure is your priority — the power rating is described as mixed.
7. ACDelco 84518407 Camera Washer Fluid Pump
A GM factory part where the fit is right and the grommet is the one missing piece.
ACDelco’s 84518407 is a GM original equipment part, built to match what rolls off the line. It carries the OEM part number 84518407, weighs 3.04 ounces, and comes in a painted exterior finish. For a GM vehicle in the listed applications, this is the pump that slots in as the exact replacement, and it looks the part — buyers report it reads like the original OEM part rather than a lookalike.
Functionality is the standout. The pump fires cleanly the first time, the installation runs smoothly, and buyers regularly describe it as an exact replacement. Quality is the second strength, and value comes up too — ACDelco pricing on a genuine GM part makes a repair center visit look like the expensive option. Fit is tight and clean on the applications the listing covers.
The one gap is packaging. The pump does not come with the grommet, and that’s the missing piece that matters at the reservoir seal — a fresh rubber grommet is a cheap addition but it’s on you to add. If you’re keeping the old pump’s grommet and it’s still pliable, you’re set; if it’s hardened, add a new one to the order.
What makes it GM correct: original equipment ACDelco build with the exact OEM part number 84518407 and a clean, tight fit.
What’s not in the box: the grommet. Order one so the seal at the reservoir survives the swap.
Best for: GM owners who want the exact factory part and are comfortable adding a grommet to the order.
Don’t count on it for: a complete kit — you’ll need to source the sealing grommet separately.
8. Genuine Hyundai 98510-2V100 Windshield Washer Motor and Pump Assembly
The factory assembly — motor and pump together — for Hyundai owners who want the direct fix.
For Hyundai drivers dealing with no spray and no whine from the pump, the 98510-2V100 is the part that goes back in as an assembly — the motor and the pump built as one unit. It runs at 208 rpm, spins a metal housing, and carries the Hyundai OEM name. The fit is direct on compatible Hyundai vehicles, and the assembly design removes any question of matching a motor to an old pump housing.
What owners talk about is the exact OEM character. The 2015 Santa Fe and 2016 Veloster Turbo come up by name, and the install reads as short — most owners mention around 30 minutes, some finishing in under 10 on a straightforward changeover. Leak-proof performance is highlighted too, which is the last thing you want to fight after a reservoir swap. For a factory part, it holds good value.
The honest caveat is the fitment. This is a Hyundai-specific assembly, so it only works for the applications the OEM part number covers. If your vehicle isn’t a Hyundai on the fitment list, the part is the wrong shape. For those it does cover, the direct-fit design and genuine factory build are exactly what the job calls for.
What Hyundai owners get
- Genuine OEM assembly — motor and pump as one unit, no matching to an old housing
- 208 rpm motor speed, spinning in a metal housing
- Installation reported around 30 minutes for many owners, some under 10
- Leak-proof performance and a direct fit on listed Hyundai models
Where it stops
- Hyundai-only fitment — other brands are simply out of scope
- Assembly format means you replace the whole unit, not just the pump
- Limited warranty coverage is on the factory terms, so read the paperwork
Built for: Hyundai owners who want an OE motor and pump assembly in one direct-fit unit.
Not your part if: you drive anything other than the listed Hyundai applications — the fitment is brand-locked.
Know the Specs
The OEM interchange number
This is the factory part code a replacement pump is built to replace — something like 7R3Z17664A or 84518407. It’s the single best way to check fitment, because it bypasses the marketing name on the listing. Match your old pump’s number to the new pump’s OEM list, and you’ve done most of the work.
Motor speed in rpm
Rpm stands for revolutions per minute, a measure of how fast the motor spins. A faster spin can mean a stronger fluid push, but the nozzle setup and hose length matter just as much. A pump built for a specific application is specced to work with that vehicle’s spray pattern — that’s why the OEM match matters more than chasing the highest rpm number you can find.
Item weight and housing material
The pump’s weight tells you something about its build. A lightweight plastic body like 1.28 ounces is common and works fine. A metal or alloy-steel housing that pushes the weight up tends to suggest more substantial construction — though you should always follow the OE specification for your vehicle rather than choosing by weight.
The grommet seal
The rubber grommet is what keeps fluid inside the reservoir instead of dripping under your car. When a fresh pump leaks right after install, that seal is almost always the reason. Buy a pump that includes the grommet, or add one to the order — hardened, reused rubber is the most common cause of a leak in a new pump.
Common Questions
How do I know if a washer pump will fit my vehicle?
Why is my brand-new washer pump leaking?
My pump runs but no fluid comes out — what’s wrong?
Does the pump come with a grommet, or do I need to buy one separately?
Is a dual-nozzle pump required for a vehicle with a rear wiper?
Is OEM better than aftermarket for washer pumps?
How long does a washer pump usually last?
How hard is a washer pump replacement to do myself?
Why is the washer pump listed as a camera washer pump on some listings?
What does the pump’s item weight tell me about quality?
The Bottom Line
For most buyers shopping a windshield washer water pump, the pick is the Motorcraft WG311 because it pairs genuine OEM interchange coverage with the longest durability record in the group. If you drive a Ford-family vehicle with a rear wiper or a wide model-year spread, the A ABIGAIL A75008WP covers more of that range and includes the grommet. And for a GM truck or classic Camaro application, the TRICO 11-513 is the lightest pump here and fits the GM lineup without fuss.
Order your pump against the OEM interchange number, add a fresh grommet if it isn’t in the box, and this repair takes minutes rather than a shop visit.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




