6 Best Whirlpool Washing Machine Drain Hose | The Leak Stops Here

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

A washer that won’t drain is a puddle on the laundry-room floor, and almost every time the culprit is a cracked or clogged drain hose. The fix is cheap, but only if the replacement fits your machine’s outlet and reaches your standpipe. This guide narrows the shelf to six hoses that are genuinely sold as Whirlpool-compatible, and it tells you exactly which machines each one lists.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

You’ll see where a genuine OEM part pays off versus a universal cut-to-fit hose, and which length covers a long reach. Read on for the best whirlpool washing machine drain hose.

Top Picks

Whirlpool W11244231 Genuine OEM Washer Drain Hose Replacement Part
Best OverallWhirlpool W11244231 Washer Drain Hose4.5+★100+ ratingsA real Whirlpool part that slots in without a knife or a guess. If your Whirlpool plate reads NTW4516FW, WTW5000DW, MVWC565FW, WTW4816FW, or MVWX655DW, this is the hose Whirlpool built for it.Check price on Amazon
Whirlpool WPW10358149 Genuine OEM Top Load Washer Inner Drain Hose
Thickest WallWhirlpool WPW10358149 Inner Drain Hose4.5+★20+ ratingsThe inside-the-cabinet hose, and the beefiest wall here by a clear margin. This is not the hose that hangs out the back of your washer.Check price on Amazon

How To Choose The Best Whirlpool Washing Machine Drain Hose

You are not really shopping for a hose. You are shopping for a match — between your washer’s drain outlet, the hose’s end, and the distance to where the water has to go.

Start with the drain outlet size, not the brand

Whirlpool-family washers do not all share one outlet size. Universal hoses like the PEVEPEXE and KAINGA models step down to fit 1-1/4 in, 1-1/8 in, and 1 in outlets, and you trim the end to the size you need. That cuttable stub (the rubber end you shorten with a knife) is what makes one hose work across several machines. A genuine OEM part skips the trimming because it is molded for a specific model family.

Check the listed model numbers before you buy

Every hose here names the machines it fits, and those lists are the single most useful thing on the page. The OEM W11244231 names NTW4516FW, WTW5000DW, MVWC565FW, WTW4816FW, and MVWX655DW. The TURFZHS replacement covers a much wider spread of Whirlpool and Maytag series. Match your model plate to a list and you remove most of the guesswork.

Measure the reach to your standpipe or sink

Length is where most returns come from. A 4-foot hose suits a washer sitting right beside the drain. A 6-foot hose covers apartments and laundry rooms where the standpipe is set back. A 10-foot hose is for a long push to a utility sink. Measure the path the hose actually travels — around the back of the machine, not a straight line — before you pick a length.

Side-by-Side Comparison

Model Best For Hose Length Type Wall Thickness Amazon
Whirlpool W11244231 OEM★ Best Overall Direct OEM swap 4 feet Genuine OEM 0.125 inches Amazon
Whirlpool WPW10358149 Inner HoseThickest Wall Top-load inner drain — Genuine OEM 0.25 inches Amazon
PEVEPEXE 6ft Universal Cut-to-fit replacement 72 inches Universal — Amazon
Obida W10899966 Discharge Hose Whirlpool discharge swap — Aftermarket — Amazon
KAINGA 10 FT Drain Hose Long-reach drainage 120 inches Universal 0.125 inches Amazon
TURFZHS W11244231 Replacement Wide model coverage 48 inches Aftermarket — Amazon

Detailed Reviews

★ Best Overall

1. Whirlpool W11244231 Washer Drain Hose

Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.

Genuine OEM4 ft Length

A real Whirlpool part that slots in without a knife or a guess.

If your Whirlpool plate reads NTW4516FW, WTW5000DW, MVWC565FW, WTW4816FW, or MVWX655DW, this is the hose Whirlpool built for it. It comes as a 4-foot piece of plastic hose with a 1.25-inch outside diameter (the measurement across the round end that pushes onto the drain outlet). No trimming, no adapter, no wondering whether the universal stub will seal. It also replaces a long string of older part numbers — W10221546, W10769870, W10821090, W10826733, W11199768, W11199820, W11203364, and W11249137 — so if your machine’s manual cites any of those, this is the current part.

Whirlpool backs it with a one-year warranty, the clearest reason to pay the OEM premium. What wins people over is how cleanly it goes on: the fit is the thing buyers talk about more than anything else, and the machine simply runs again once it is seated. Build quality earns the second round of praise — this is a hose that reads as the same part you took off.

The honest catch is length. Some buyers found this hose 16 inches shorter than what they needed, so measure the run from the back of the washer to your standpipe before you commit. The 0.125-inch nominal wall (the thickness of the plastic itself), against the 0.25-inch wall of the WPW10358149 inner hose, is fine for a standard drain run but not the pick for someone who needs a stiff, crush-resistant line.

Why this one earns the top slot

  • Genuine OEM build with a one-year Whirlpool warranty
  • Replaces eight legacy part numbers, so old manuals still match
  • Molded 1.25-inch outside diameter fits without trimming

Where it will let you down

  • 4-foot length runs short of a set-back standpipe
  • 0.125-inch wall is the thinner option on this list

Reach for this if: your washer model is on the compatibility list and the drain sits close by.

Measure first if: your standpipe is far enough back that 4 feet feels tight.

Thickest Wall

2. Whirlpool WPW10358149 Inner Drain Hose

Inner Drain Hose0.25 in Wall

The inside-the-cabinet hose, and the beefiest wall here by a clear margin.

This is not the hose that hangs out the back of your washer. The WPW10358149 is the inner drain hose for top-load Whirlpool machines — the one that lives inside the cabinet and carries water from the tub to the pump. That job changes what you want from it, and Whirlpool molds this one with a 0.25-inch nominal wall, versus the 0.125-inch wall of the W11244231. A thicker wall resists collapsing under suction, which is exactly what you need on a line buried behind panels.

Compatibility is the gate here. Whirlpool lists CAM2742TQ, CAM2762TQ, CAM2752TQ, QCAM2730YQ, and CAWS923MQ, and the part also replaces 8317940, 3361805, 3357024, 3355497, 3361809, 3349018, 63206, WP3976399, and W10358149. Dig out your model plate before ordering — a commercial top-load machine is the most likely candidate. It carries the same one-year Whirlpool warranty as the rest of the OEM line, so a manufacturer defect gets covered rather than argued.

Here is the follow-up question a buyer should ask: is your problem actually the inner hose? If water pools inside the cabinet rather than behind the machine, yes. If the machine simply will not pump out to the standpipe, you want an external discharge hose instead and this part will not solve it. There is also almost no owner feedback to lean on here, so you are trusting the OEM spec sheet and the part-number match rather than a crowd of installers.

Wall thickness that matters: At 0.25 inches, this is the sturdiest hose wall in the group, built to hold shape against pump suction inside the cabinet.

The real risk: Buy it only if your model number matches — this is a specific inner-cabinet part, not a universal back-of-washer hose.

Confident call: the right part for an internal top-load drain leak, with the thickest wall on the shelf.

Wrong tool if: your leak is at the standpipe end of the run.

Most Versatile

3. PEVEPEXE 6ft Washing Machine Drain Hose

Three Outlet SizesU-Bend Holder

One hose, three outlet sizes, and the holder that keeps the end where it belongs.

When you are not certain which outlet your washer has, this is the hose that removes the gamble. The stepped end fits 1-1/4 in, 1-1/8 in, and 1 in outlets, and you cut the interface down to the size that matches your drain. It is listed as compatible with Samsung, LG, Whirlpool, Maytag, Kenmore, GE, Giantex, Panda, and Haier, so a Whirlpool machine is comfortably covered. You get 72 inches of gray rubber hose, two stainless steel clamps, and a U-Bend holder that hangs the end so water runs freely instead of siphoning back.

The construction is a high-density spiral core under the corrugation, which is what stops the hose from flattening when it bends around a tight corner. The six-foot reach suits apartments and laundry rooms where the standpipe is not right beside the machine.

Durability draws a split verdict — it holds up for plenty of owners but is not built like an OEM part, and a few buyers felt it was not worth the money. At 9.6 ounces it is a light hose, so it needs a little care during install. Cut cleanly and clamp firmly and it does the job.

What this hose gets right

  • Fits 1-1/4 in, 1-1/8 in, and 1 in outlets without an adapter
  • U-Bend holder keeps the drain end hung correctly
  • 72-inch length covers a set-back standpipe

What to plan around

  • Lighter build than OEM — handle it gently while fitting
  • Durability feedback is mixed over the long haul

Best for: a buyer who does not want to measure the outlet before ordering.

Think twice if: you want OEM-grade plastic behind the washer for years.

Long Reach

4. KAINGA 10 FT Washing Machine Drain Hose

120 in LengthCuttable Stub

Ten feet of hose for the laundry room that was never laid out conveniently.

Some drain setups are simply far away — a utility sink in the next room, a standpipe mounted high and back. This hose answers that with 120 inches of flexible corrugated PVC, versus the 72-inch PEVEPEXE and the 4-foot OEM part. The outlet end fits 1 in, 1-1/8 in, and 1-1/4 in connections using a cuttable rubber stub, so it lands on a Whirlpool machine as readily as a GE or Kenmore one.

The wall is a 0.125-inch nominal thickness with a 1.25-inch outside diameter, the same spec as the OEM W11244231, so it should behave similarly against suction and bending. The corrugated PVC is built to route through tight gaps without kinking, leaking, or cracking. Stainless steel clamps and a removable hook come in the box to hold the drain end secure.

Setup is a trim-and-clamp job: cut the stub to your outlet size, position the hose, tighten the clamp. No tools beyond a knife for the trim. The trade-off to weigh is that all that extra length needs somewhere to go — loop it with slack rather than letting it sit flat and low, so water drains downhill the whole way and does not sit in a belly of hose.

The length advantage: 120 inches of corrugated PVC is the longest reach on this list, built for sinks and standpipes set well away from the washer.

Fit note: that length rewards a careful loop — slack left lying flat can trap water and slow the drain.

Go with it when: your drain is more than a machine-width away from the washer.

Overkill if: the standpipe sits right behind the machine.

Wide Coverage

5. TURFZHS W11244231 Washer Drain Hose

Stretchable Length48 in Dimensions

A budget-friendly alternative to the OEM part, with a stretchable answer to length.

This hose targets the same W11244231 replacement slot as the Whirlpool OEM, and it crosses over to Maytag machines too. It replaces W11244231, W10221546, W10769870, W10821090, W11203364, W11249137, W10826733, W11199768, and W11199820. The compatibility spread is broad — Whirlpool 1CWTW4, 2DWTW, 3DWTW, 3LWTW, 3NWTW4800, 3SWTW4800, and 4GWTW series, plus Maytag 3LMVWC, 4GMVW, 4KMVW, 4KNTW, and 7MMVW series. It also names specific models like MVWX655DW1, NTW4516FW3, WTW4816FW2, WTW5000DW1, WTW5000DW2, WTW5000DW3, and WTW9500EC0.

Its point of difference is the stretchable material. Since hose length varies by production year on these machines, the hose can be pulled out to the length you actually need rather than forcing you into a fixed measurement. It measures 48 inches by 1 inch and is built from plastic and rubber to handle a damp laundry-room environment.

The sensible caution: stretchable means you should set it to length and leave it, rather than tugging it every time you move the washer. It is an aftermarket part, so the one-year OEM warranty you get with the genuine Whirlpool is not part of the deal here — you are trading that coverage for a lower-cost route to the same replacement number. Disconnect power and water before you fit it, as the instructions state.

Where it pulls ahead

  • Huge model list covers both Whirlpool and Maytag series
  • Stretchable material adjusts to production-year length differences

What you give up

  • Aftermarket, so no one-year Whirlpool warranty
  • Stretch design rewards careful handling over time

The smart buy for: a Maytag or older Whirlpool machine that the OEM list does not name.

Look at OEM instead if: warranty coverage is worth more to you than the saving.

Closest Match Set

6. Obida W10899966 Washer Discharge Hose

Discharge HoseMulti-Part Replaces

A part-number specialist for the Whirlpool discharge line.

If your machine’s parts diagram points to W10899966, this hose is aimed squarely at you. The Obida part replaces W10899966, AP6030119, W10215091, WPW10215091, 4454560, PS11765836, W10444123, and W10763078, and it is listed as compatible with a long roster of Whirlpool chassis codes — the 3LMVWC100YW0, 3LMVWC315FW0, 3LMVWC400YW0, 4GATW4900YW0, 4GMVWC100YQ0, 4GMVWC300YW0, 4GNTW4400YQ0, 4GNTW4600YQ0, 4KATW4830EW0, 4KATW4930DW0, 4KATW5215FW0, and 4KATW5415FW0 families among them.

This is the pick for the buyer who already knows the part number. Cross-reference it against that list, and it is a direct discharge-hose replacement. It is an aftermarket part under the Obida name rather than a Whirlpool-boxed one, so the warranty situation differs from the OEM picks above.

The caution is straightforward: this hose lives and dies by the part number. There is no cuttable stub here and no multi-size outlet, so the model match has to be right on the money. If your manual cites a different number, look at the universal hoses instead — the PEVEPEXE or KAINGA cover more machines by trimming to fit. Come with the right number in hand and this one is a clean, no-fuss swap.

Its whole pitch: it replaces eight part numbers tied to Whirlpool’s discharge-hose circuit, so an older manual still finds a current match.

The trade-off: no trimming and no universal sizing — the number has to match exactly or it is the wrong hose.

Made for: the owner who already pulled the part number off the machine.

Not for: anyone who is guessing at the number and wants a hose that adapts.

Know the Specs

Nominal wall thickness

This is how thick the plastic of the hose wall is, measured in inches. A 0.125-inch wall is the thinner spec and suits a standard drain run behind the machine. A 0.25-inch wall is the sturdy option, better at holding shape when the hose sits inside the cabinet where pump suction pulls at it. Thicker is not automatically better — it is a stiffer hose to route.

Outside diameter and outlet sizing

The outside diameter is the measurement across the round end that connects to your washer’s drain outlet, and 1.25 inches is a common Whirlpool figure. Universal hoses step down to fit 1-1/4 in, 1-1/8 in, and 1 in outlets, with a cuttable stub you trim to match. A hose with the exact fixed diameter goes on without trimming; a universal one adapts to whichever machine you have.

Hose length

Length sets how far the drain can travel from the back of the washer to the standpipe or utility sink. A 4-foot (48-inch) hose handles a close drain, a 6-foot (72-inch) hose covers a set-back standpipe, and a 10-foot (120-inch) hose reaches a sink in another part of the room. Measure the path the hose actually takes, not a straight line, and leave a little slack.

Genuine OEM versus aftermarket

A genuine OEM part is made by the appliance maker for a specific model, and here the Whirlpool parts carry a one-year warranty. Aftermarket hoses from other brands can replace the same part number and often cost less, but they do not carry that same manufacturer warranty. The OEM route removes the sizing guesswork; the aftermarket route gives you more model coverage and stretchable or cuttable options.

Common Questions

How do I know which drain hose size my Whirlpool washer needs?
Check the drain outlet on the back of the machine and measure across it. Most Whirlpool-family washers use an outlet that matches one of three common sizes — 1-1/4 in, 1-1/8 in, or 1 in. A universal hose like the PEVEPEXE or KAINGA fits all three by trimming the rubber stub, while the OEM W11244231 comes molded at a fixed 1.25-inch outside diameter.
Will a universal drain hose fit a Whirlpool washing machine?
Yes, provided the outlet size matches. Both the PEVEPEXE 6ft and the KAINGA 10 FT list Whirlpool among the compatible brands and step down to fit 1-1/4 in, 1-1/8 in, and 1 in outlets. The key step is cutting the interface to the size your machine actually uses before you tighten the clamp, so it seals rather than leaks.
What is the difference between an inner drain hose and a discharge hose?
An inner drain hose, like the Whirlpool WPW10358149, lives inside the washer cabinet and carries water from the tub to the pump. A discharge hose, like the Obida W10899966, is the line that sends used water out to your home drainage system. If water pools inside the cabinet you want the inner hose; if the machine will not pump out to the standpipe, you want the discharge hose.
How long should a washing machine drain hose be?
Long enough to reach your standpipe or utility sink with a little slack, and no longer. A 4-foot hose suits a washer sitting beside the drain, a 6-foot hose covers an apartment-sized gap, and a 10-foot hose handles a long push to a distant sink. Measure the route around the back of the machine rather than a straight line so you do not come up short.
Do I need to replace the clamps when I change the drain hose?
Use fresh clamps where you can. The PEVEPEXE and KAINGA hoses both ship with stainless steel clamps in the box, so you have new hardware ready. A worn clamp is one of the easier ways to end up with a slow leak after a hose swap, so tighten the clamp firmly once the hose is seated on the outlet.
Why does my new drain hose keep slipping out of the standpipe?
The end is not secured. The PEVEPEXE includes a U-Bend holder and the KAINGA includes a removable hook, and both are there to hang the hose end so it stays put and drains freely. A hose that sits loose in the standpipe can pull out during the drain cycle, so use the holder rather than just pushing the end into the pipe.
Is a genuine OEM Whirlpool drain hose better than an aftermarket one?
It depends on what you value. The genuine Whirlpool hoses here carry a one-year warranty and match specific part numbers and model lists, which removes sizing guesswork. Aftermarket hoses like the TURFZHS replacement cover a wider range of Whirlpool and Maytag models and can stretch or trim to fit, but they do not carry that same manufacturer warranty.
How do I fit a drain hose if I do not know my washer model number?
Go universal rather than OEM. A cut-to-fit hose such as the PEVEPEXE 6ft or the KAINGA 10 FT fits the three common outlet sizes, so you match it to the drain outlet by measurement instead of model. Check the outlet size on the machine, trim the stub to suit, then clamp it down.
Can I cut a washing machine drain hose shorter?
On a universal hose, yes — the fitting end is designed to be trimmed. That is exactly how the PEVEPEXE and KAINGA hoses adapt to 1-1/4 in, 1-1/8 in, and 1 in outlets. Do not cut an OEM hose like the W11244231, though; it is molded to a fixed size, and trimming it would ruin the seal.
What should I check before installing a replacement drain hose?
Disconnect the power and water supply to the washer first, as the TURFZHS instructions state. Then confirm the hose end matches your outlet size, route the hose with a downward slope so water drains rather than sitting in a belly of hose, and tighten the clamp firmly. Leave a little slack so the hose is not pulled tight against the machine.

The Bottom Line

For most people, the best whirlpool washing machine drain hose is the Whirlpool W11244231 Genuine OEM because it fits the listed models without trimming and carries a one-year warranty. If your drain lives inside the cabinet, the Whirlpool WPW10358149 is the inner hose with the thickest 0.25-inch wall. And when you are not certain of the outlet size or need a longer reach, the PEVEPEXE 6ft adapts to three sizes, while the KAINGA 10 FT covers the longest runs.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top