Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
You don’t want to be standing in front of an open oven holding a rack that doesn’t fit. The whole purchase depends on one thing: matching the exact part number and width to your Whirlpool range before you order. Get that right and the rack slides in like it was always there. Get it wrong and you are packing it back up. Below you’ll find what actually fits, which racks hold heavy pans without sagging, and which ones are worth the upgrade.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
A replacement rack only earns its place when the part number and dimensions line up with your range, so every pick here is judged on fit first. Here is what matters most when you shop for whirlpool oven racks.
Top Picks


How To Choose The Best Whirlpool Oven Racks
Your old rack is the best shopping list you own. Pull it out and find the part number stamped on the frame, then check the model number inside your oven door. Matching both is the fastest route to a rack that drops straight in on the first try.
Start With The Part Number, Not The Brand
A rack sold as a Whirlpool replacement is only right for you if it lists your specific part number. The racks here cover families of numbers like W10256908, WPW10179152, and W10550642. Each replacement number can serve several original parts, so scan the list against what is stamped on your current rack.
Measure The Width And Depth Yourself
Part numbers tell you compatibility, and a tape measure tells you fit. A rack sized 24.2 x 16 5/8 inches will not sit the same as one sized 24.7 x 15.7 inches. Oven cavities vary, so measure the opening the rack slides into and compare it against the listed dimensions.
Look At The Steel And The Grid
Food-grade 304 stainless steel resists rust and holds its shape under oven heat. A thick wire grid spreads the weight of a loaded cast-iron pot so the bars do not bow. Smooth, burr-free edges protect your hands and stop scratches inside the oven cavity.
Watch The Slope At The Back
Some Whirlpool gas ranges use a rack that angles up at the rear. That slope belongs at the back of the oven, not the front. If you flip it, the rack can bind and feel hard to slide. Check your old rack’s shape before you order a flat replacement.
Side-by-Side Comparison
| Model | Best For | Stated Size | Material | Part Numbers Replaced | Amazon |
|---|---|---|---|---|---|
| Whirlpool WPW10179152 Genuine OEM★ Best Overall | OEM exact-fit replacement | 16.88 x 2.94 x 28.63 inches | Genuine OEM materials | WPW10179152, W10179152, WP4455488, W10439248, 4448717, 4455488 | Amazon |
| Upgraded W10256908 (FOLOSEM)Top Performer | Heavy-duty daily baking | 24.2 x 16 5/8 inches | 304 stainless steel | W10256908, WPW10256908, AP4411894, PS2358516 | Amazon |
| W10550642 (Anniparts) | Gas range flat rack | 25 x 15 inches | 304 stainless steel | WPW10550642, W10550642, AP6022861 | Amazon |
| W10256908 (Obida) | Electric oven replacement | 24 x 15.7 inches | Non-stick wire rack | W10256908, WPW10256908, AP6017994, PS11751295 | Amazon |
| WPW10179152 (JiveLum) | Rust-resistant upgrade | 24.7 x 15.7 inches | 304 stainless steel | WPW10179152, W10179152 | Amazon |
| Upgraded W10256908 (KOZHOM) | Wide model coverage | 24 x 15.75 inches | Stainless steel | W10256908, WPW10256908, 3195710, PS11751295 | Amazon |
Detailed Reviews
1. Whirlpool WPW10179152 Range Oven Rack
Our pick — 4.5+★ from 60+ verified ratings; the strongest balance of quality and price.
The one built to Whirlpool’s own drawings for a first-time fit.
If your range is one of the models this rack was drawn for, this is the safest buy on the page. It is a genuine OEM part — meaning Whirlpool itself builds it to the same engineering standards as the rack that came with your appliance. It carries a one-year warranty and replaces part numbers W10179152, WP4455488, W10439248, 4448717, and 4455488. The compatibility list names real models like WGE745C0FS, WGE555S0BS, WGG745S0FS, WGG555S0BS, and GGE388LXS.
This rack measures 16.88 x 2.94 x 28.63 inches, while the FOLOSEM rack lists 24.5 x 16 x 2 inches, so the two are not interchangeable. That gap is exactly why you check your oven model before ordering instead of assuming all Whirlpool racks share the same footprint. Whirlpool has used more than one rack shape across its lineup, and this part covers its own set.
Buyer reviews back up the fit-first approach. Buyers report it drops in and looks like the rack that came with the range. For a replacement part, that drop-in fit matters more than any styling detail. Find your model on the compatibility list and this is a permanent fix.
Where This Part Earns Its Keep
- Genuine OEM build, so it meets the same engineering standards as the rack that shipped with your range
- One-year warranty backs the part directly
- Replaces six part numbers, which widens your chance of a match without guesswork
- Named-compatible with a long list of Whirlpool range models
The Honest Trade-Off
- You must confirm your own model number — this rack will not drop into every Whirlpool oven
- Priced as a premium part compared with aftermarket replacements
Match It Up: Buy this one when your range model and part number both appear on the compatibility list.
Small Print First: The narrow model coverage is the one thing to check before you click, since a Whirlpool brand name on the box is not enough on its own.
2. Upgraded W10256908 Oven Rack 24.2″ x 16 5/8″ Replacement
The heavy-gauge workhorse that shrugs off a loaded cast-iron pot.
Here is the rack buyers keep coming back to for fit. What wins people over is how precisely it lands in the cavity — this is the most-praised trait of the pick, and it shows in the reviews. The rack measures 24.2 x 16 5/8 inches and swaps in for part numbers W10256908, WPW10256908, AP4411894, PS2358516, PS11751295, W10179196, W10138079, 3195710, 1489104, AH2358516, and EA2358516. Those numbers cover a large slice of the Whirlpool, Amana, and Kenmore range family.
The build earns its reputation too. Food-grade 304 stainless steel resists rust and corrosion under normal oven heat, and the thick grid holds its shape when you slide in a heavy pan. Edges are smooth and burr-free, so you are not catching a finger on the frame or scratching the oven wall. It comes with a one-year warranty, which is a sensible safety net for a part that lives in a high-temperature box.
Measure before you order, though. The listed dimensions and the size field on the listing do not read the same, so trust your own tape measure against the opening your old rack sat in. Get the measurement right and the rack slides in and stays put.
Best-Suited Buyer: Anyone with a W10256908-family Whirlpool, Amana, or Kenmore range who wants a sturdy 304 stainless rack at an everyday price.
Worth Knowing: Double-check your cavity width with a tape; the listing shows two slightly different size readings, and your old rack is the better reference.
Reach For This One: The right call when fit and a thick, load-bearing grid are your two priorities.
Look Elsewhere If: Your part number is not in the replacement list — no amount of good steel helps a rack that will not slot in.
3. W10550642 Oven Rack Stove Replacement Parts for Whirlpool
A gas-range rack that holds cast iron, but wants a careful size check first.
This one is sized 25 x 15 inches and built for the Whirlpool and Amana gas range family. It replaces part numbers WPW10550642, W10550642, and AP6022861, and it fits a long model list that runs through the WFG320 and WFG505 lines plus several Amana AGR numbers. The 304 stainless steel resists deformation and rust, so a heavy pot of stew does not bow the bars.
The part that performs best in everyday use is simple function: it slides in and holds your bakeware the way it should. Fit is the mixed signal here — sometimes spot on, sometimes off — and a few households find it takes more effort to slide than the rack it replaced. That makes measuring against your own cavity the single most important step before you buy. If your old rack has that upward slope at the back, remember the slope belongs at the rear of the oven, not the front.
Treat it gently on cleanup. Warm soapy water and a soft cloth keep the non-stick surface intact; abrasive pads, steel wool, and hard brushes wear it down. It reaches 304 stainless at a modest outlay, and the rack is sturdy enough for the heavy pans most gas-range cooks reach for.
What Holds Up Well
- 304 stainless steel resists deformation and rusting under oven heat
- Sturdy enough to carry heavy cast-iron pots for stews and braisers
- Non-stick surface makes warm-water cleanup simple
What To Watch
- Fit is mixed — some report the size does not match their oven, so measure first
- Sliding in and out can take more effort than a broken-in original
Built For: Whirlpool and Amana gas ranges where the WFG320, WFG505, or AGR model numbers line up with yours.
Proceed Carefully If: You cannot confirm your cavity size — this is the one where a tape measure earns its keep.
4. W10256908 Range Oven Rack, 24″ x 15.7″ Replacement Wire Rack
A simple wire rack aimed squarely at electric Whirlpool ovens.
Measured at 24 inches in length and roughly 15.7 inches in width, this rack is purpose-built for specific electric oven models. It replaces part numbers W10256908, WPW10256908, AP6017994, PS11751295, 3195710, W10138079, and W10179196. The compatibility list names electric models such as RF378LXKS1, GS395LEGQ5, RF262LXSQ0, and SF315PEEW0.
Its job is to give you a stable, level platform for baking, roasting, and grilling, and it sits flush in the cavity on the ovens it was designed for. The non-stick finish makes warm water and mild detergent enough for cleanup — skip the wire balls and hard brushes, which wear the coating. Where it differs from the FOLOSEM rack above is the steel: that one spells out 304 stainless, while this listing is a non-stick wire rack, so it leans on the coating rather than bare stainless for easy cleanup.
Electric-oven owners with a matching part number get a direct swap for the old rack. The catch is breadth — this one is tied to electric models and specific part numbers, so a gas range or an unlisted model will not fit. Confirm yours and the install is about as simple as appliance parts get.
Who This Suits: Electric Whirlpool oven owners with a listed part number who want a level baking platform and easy cleanup.
The Catch: It is not universal — it is tied to electric models and specific numbers, so gas-range owners should keep looking.
Your Match If: Your electric oven numbers turn up on this rack’s replacement list.
Keep Looking If: You run a gas range or cannot find your part number here.
5. WPW10179152 Oven Rack
A no-modification swap that skips the drilling and fiddling entirely.
Direct replacement is the headline here. This rack is sized 24.7 x 15.7 inches and is an exact replacement for part numbers WPW10179152 and W10179152, with no modification needed to install. Food-grade 304 stainless steel makes it sturdier and heavier than ordinary alternatives, and it resists high-temperature deformation so a heavy cast-iron pot sits steady. It also shrugs off rust better than a plain steel rack.
What buyers approve of most is the drop-in fit — it lands where the old rack did, and the quality reads close to the OEM standard. The flat, precisely engineered grid supports air circulation, so heat moves evenly around the cavity and you can bake several items at once. The non-stick surface keeps cleanup to a warm-soap wipe with a soft cloth or kitchen roll. Keep the steel wool and hard brushes away to protect the finish.
Double-check the model and the size on the listing before you commit — a 24.7-inch width has to match your cavity, and this is not a one-size oven part. On the right range, though, it installs in seconds with no drilling or modification.
Why It Stands Out
- Exact replacement for WPW10179152 and W10179152 with no modification needed
- 304 stainless steel resists high-temperature deformation and rust
- Flat grid supports air circulation for even heat across the cavity
Check Before Buying
- Sized 24.7 x 15.7 inches, so a mismatched cavity leaves it loose or tight
- Compatibility is limited to the two listed part numbers
Straight Swap For: Ranges that take WPW10179152 or W10179152 and want a heavier, rust-resistant upgrade.
Wrong Turn If: Your part number is anything else — this rack keeps to its two numbers.
6. Upgraded Oven Rack W10256908 for Whirlpool/Jenn-Air Range
The broadest model coverage of the bunch, if your size matches.
Support for a long spread of Whirlpool and Jenn-Air ranges makes this one worth a look when your model number falls outside a narrower listing. It fits models whose numbers begin with codes such as 6657, AER5, AGR, FEP3, FES3, GERC4, GR39, GS4, KER, MGR, RF1, WFE, and WFG, among others. The rack measures 24 inches wide by 15.75 inches deep and replaces part numbers WPW10256908, 3195710, PS11751295, W10138079, W10179196, AP6017994, and 1489104. Standard food-grade stainless steel keeps it durable and rustproof.
The thick grid bears weight better and resists breaking, and it is dishwasher safe — a real convenience after a messy roast. The size and fit are the mixed part: some ovens take it perfectly while others find it too small, so the listed 24 x 15.75-inch dimensions need to match your cavity before you order.
If you are unsure whether it fits your stove, the maker invites you to reach out and confirm first. That is the smart move here — this rack’s strength is coverage, and the only real risk is buying before you verify the size.
Ideal For: Whirlpool and Jenn-Air owners with an unlisted-by-others model number who can confirm the 24 x 15.75-inch size.
Do This First: Match the width and depth to your old rack; fit is the one split the reviews show here.
Grab It When: Your range model number is on the long list and the 24 x 15.75-inch size matches.
Pause If: You have not measured your cavity — size is the decision point on this one.
Know the Specs
Part Number Match
A part number is the code stamped on your old rack and used in the listing to say which ovens it fits. One replacement rack often covers several original numbers, so compare the list to what is printed on your current rack and the model tag inside your oven door. A match here is what makes the rack slide in correctly.
Stated Dimensions
The listed size tells you the footprint of the rack in inches. Width and depth both have to line up with the opening your old rack sat in. A rack sold at 24.7 x 15.7 inches will not sit the same as one at 24 x 15.75 inches, so measure the cavity rather than assuming every Whirlpool oven is identical.
304 Stainless Steel
304 stainless is a food-grade steel that resists rust and corrosion under normal oven heat. It also holds its shape better than ordinary steel, so a heavy pot does not bow the bars. Racks listed as non-stick wire lean on a coating instead, which keeps cleaning easier but calls for gentler scrubbing.
Grid Thickness & Load Bearing
A thick wire grid spreads the weight of a loaded pan across more bars, so it sags less in a hot oven. That matters when you slide in cast iron for a stew or a braiser. Smooth, burr-free edges on the frame also protect your hands and the oven walls during the swap.
Common Questions
How do I find the right oven rack for my Whirlpool range?
Will a W10256908 rack fit my oven?
What is the difference between a genuine OEM rack and an aftermarket one?
How do I know if my rack is the sloped-back type?
Can I put heavy cast-iron pots on these oven racks?
How do I clean a stainless steel oven rack?
Are these oven racks compatible with other brands like Amana, Maytag, or Kenmore?
What size oven rack do I need if my old one has no readable number?
Will a flat rack work if my oven had a sloped one?
The Bottom Line
For most range owners who can confirm the model and part number, the winner is the Whirlpool WPW10179152 Genuine OEM Rack, because it is built to Whirlpool’s own standards and backed by a one-year warranty. If you want a sturdy 304 stainless workhorse that covers a wide spread of Whirlpool, Amana, and Kenmore models, reach for the FOLOSEM W10256908 Upgraded Rack. And when your model number is fussy and you need broad compatibility with a dishwasher-safe finish, the KOZHOM W10256908 is the one to check. Whichever you choose, confirm the part number and the size first — that single step decides whether the rack slides in or comes right back out.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.



