Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your burner knob cracked, melted, or spins without gripping the shaft — and now you are staring at a cooktop you cannot control. Get the fit right and you are cooking again in minutes with no repair visit.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Below you will find eight replacement sets grouped by fit family, material, and price tier, with the exact part numbers each one replaces. The fastest way to narrow the field is to match your model number and shaft shape, which is exactly what this breakdown of whirlpool gas range knobs is built to help you do.
Top Picks



How To Choose The Best Whirlpool Gas Range Knobs
A gas range knob is not a universal part. It has to slide onto one specific valve stem, sit flush against one specific control panel, and survive the heat that radiates up from the burners. Buying the wrong one is the single most common mistake here, and it usually happens because the buyer matched the look of the knob instead of the part number.
Start with your model number, not the photo
Every Whirlpool gas range has a model plate, usually inside the door frame or on the back panel. Write that number down before you shop. Sellers list the exact model prefixes and full codes their knobs fit — for example, one set here covers WFG320 and WFG505 ranges while another covers WFG540 and WFG720 ranges. If your code is not on the list, the knob may look identical and still not seat correctly.
Check the shaft shape and the markings
Most of these knobs use a D-shaped socket (a round hole with one flat side that locks onto the stem so the knob cannot spin freely). Measure the stem diameter before ordering. Several sets here are built for a stem around 0.2 inches across the flat. You should also look at the side of your old knob: if it reads “OFF” and “IGNITE,” you need one part family, and if it does not, you need a different one entirely. That single detail rules out half the wrong purchases.
Decide between plastic and metal
Plastic knobs are the cheaper route and match many factory originals exactly. Metal knobs cost more but resist heat deformation better over years of use. If your last set cracked or melted, metal is the upgrade worth paying for.
Side-by-Side Comparison
| Model | Best For | Pack Size | Knob Material | Knob Size | Amazon |
|---|---|---|---|---|---|
| 4 WPW10339442 (Semzohc)★ Best Overall | WFG320 / WFG505 owners | 4 pack | Plastic | 2″L x 2″W | Amazon |
| Range Burner Knob White 8273104Budget-Friendly | White-finish ranges, wider model spread | 4 pack | Plastic | 1.75″L x 1.75″W | Amazon |
| W10339442 Black (Reyhoar)Full-Set Refresh | Full four-burner refresh in matte black | 4 pack | ABS plastic | 2″L x 2″W | Amazon |
| W10766544 5 Pack (Beaquicy) | Stainless look on a budget | 5 pack | Stainless steel | 1.89″L x 1.38″W | Amazon |
| W10766544 (Funmit) | WFG540 / WFG710 / WFG720 ranges | 5 pack | Stainless steel | 1.9″ diameter | Amazon |
| W10594481 5 Pack (Smart Union) | Newer WCG-series ranges | 5 pack | Stainless steel | 0.55 in depth | Amazon |
| W11517334 Metal (MAHOOK) | Cast-metal durability, WEG745 ranges | Set | Cast metal, brushed | 2″L x 1.9″W | Amazon |
| 5Pcs W11239985 W10850015 (MTZUL) | WFG525 / WFG535 / WFG550 ranges | 5 pack | Metal | 3″L x 2.2″W | Amazon |
Detailed Reviews
1. 4 WPW10339442 Stove Knobs Fit for Whirl-Pool Gas Range
Our pick — 4.0+★ from 300+ verified ratings; the strongest balance of quality and price.
The set that reads like the part you took off — same black plastic, same size, no surprises at the stove.
This is a four-knob pack of the W10339442 pattern (a common factory replacement number on Whirlpool gas ranges), and the seller publishes an unusually long fitment list. It names WFG320M0BB0 through WFG320M0BW2, the WFG505M0 family, the WFG510S0 family, the WFG520S0 family, and the WFG524SL series. If your door-frame sticker matches any of those, you have a strong match on the first try — no guessing from photos.
Each knob is 2 inches long and 2 inches wide, and the set weighs 5 ounces in total, so the plastic body is light and the face sits flush on the panel. The finish is listed as stainless steel and polished, and the body colour is black, so it blends back into a dark control strip. That matters on a black cooktop where a mismatched grey dial is the first thing you notice after a repair.
What wins with this set is the fit — it earns more owner mention than any other point about it, and the quality follows close behind. The recurring note is that some installations fight back: the last few millimetres can need a firm push before the knob seats. It is not a defect, just a tight tolerance. Give it a straight, steady press and skip the hammer. The set also replaces a long part list (W10339442, WPW10339442VP, 2311008, AP6019877, PS11753188, EAP11753188, W10339443, WPW10339443, 2311009, AP5331724, PS3507189, EAP3507189), so you can cross-check your old knob against a number you already have.
What Keeps Working
- Fitment list names four full Whirlpool gas-range families plus the WFG524SL series.
- Ambidextrous knob orientation — it fits the shaft either way it lands.
- Replaces a dozen part numbers, so an old number on your bench still cross-checks.
Where It Tests You
- Plastic handle material, so a very hot cooktop over years is still a risk.
- Knobs can need a firm press to seat the last stretch onto the stem.
Go This Way If: your sticker says WFG320, WFG505, WFG510, WFG520 or WFG524 and you want a straight factory-style swap.
Hold Off If: your range model is not on the published list — no amount of visual similarity makes a wrong stem fit right.
2. Range Burner Knob White 8273104, 4 Pack
If your cooktop is white, a black dial will scream at you every morning from across the kitchen.
This is the white finish answer in a field where black and stainless dominate. It measures 1.75 inches long by 1.75 inches wide with a mounting hole diameter of 0.24 inch, and it sits 1.23 inches deep. Put that against the W10339442 in position one at 2″L x 2″W: this one is the more compact dial, which matters if your control panel has tight spacing between burners or a narrow trim strip.
Coverage is the real selling point. The seller lists fitment across ranges whose model codes begin with AGR5, FGS32, GS39, SF19, SF26, SF31, SF32, SF35, SF36, SF37, SF38, SGS37, TGS32, WFG36 and YSF3. That spread reaches well beyond the WFG clusters, so older and mixed-era Whirlpool gas ranges have a shot here even when the newer part families do not list them. The knob also replaces 8273104, WP8273104, PS393679, AP6012364, 8273112, 8273284, PS11745571 and WP8273106VP.
Your honest trade-off is sizing and heat. Some owners find the dial smaller than the one that came off, and a few report a knob melting near the burners. It is a plastic-bodied part at a budget-friendly tier, so treat a hot cooktop kindly and keep a grease-free gap around the base. For a low-cost, colour-correct fix on a white range, the fit and finish do their job.
The Colour Match: white body, white exterior finish and a powder-coated surface, so the dial disappears into a white control panel instead of advertising itself.
What To Watch: plastic construction under sustained burner heat, and a smaller feel in hand than some factory originals.
Reach For This If: you need a white knob and your model prefix appears on the seller’s list.
Look Elsewhere If: your range lives at constant high heat or you want a heavier metal hand-feel — the cast-metal picks below suit you better.
3. W10339442 Gas Range Knob Black Replacement (Reyhoar)
Four knobs at once so your cooktop does not end up with three fresh dials and one faded survivor.
The pitch here is a complete face-lift. You get four black knobs in one pack, all replacing the W10339442 family, so every burner matches after the swap instead of half the panel looking newer than the rest. Each knob measures roughly 2 inches across and 1.54 inches tall, and the body is upgraded high-density ABS plastic rated by the maker for heat resistance and anti-crack performance. The matte black finish is the visual anchor — it blends back into a dark gas range instead of catching light.
Compare that 1.54-inch height with the white 8273104 set at 1.23 inches deep: this knob stands taller off the panel by a visible measure, which suits ranges designed with a chunkier dial. The D-shaped post mount means you turn the burner off, pull the old knob straight off, and press the new one on — no tools, no service call.
Here is the fair caveat, and it is the most-discussed point about this set: seating is not always snug. Some buyers get a perfect flush fit on the first press, others find the knob rides slightly proud of the shaft. If yours sits loose, check that you are pressing straight down on the flat of the D rather than at an angle. The plastic body is also the honest limit against the metal sets below — a sustained hot spot will still win eventually. Still, for a uniform black refresh with an OEM-matching size, it does exactly what it promises.
Uniformity Play: a four-pack of identical dials replaces the whole row, so the panel reads as one unit rather than a patchwork.
The Fit Caveat: seating can vary from snug to slightly proud; pressing straight onto the D-shaped post is the fix.
Pick This One If: your whole knob row is cracked or faded and you want one purchase to fix all four burners in matte black.
Think Twice If: you only need a single replacement and want a guaranteed flush seat — the tighter-tolerance plastic sets are a safer bet.
4. W10766544 Gas Stove Knobs 5 Pack (Beaquicy)
Five stainless-steel dials for the price of a plastic set — the value play of the group.
Metal at a plastic price is a rare combination, and it is the reason this pack belongs on your shortlist. Each knob is stainless steel rather than ABS, with a metal insert inside the D-shaped interface (the socket that grips the valve stem) and a metal ring added around it to stop the mounting face from splitting. The maker also rates the heat resistance higher than ordinary dial knobs and describes the rotation force as moderate, so the flame adjusts smoothly instead of snapping between settings.
Size lands at 1.89 inches long by 1.38 inches wide with a 1.38-inch depth, and the pack holds 5 knobs. Compare that pack count with the four-knob W10339442 set in position one: five dials against four covers a range with a spare on the shelf, which is genuinely useful when one burner knob lives closest to the heat. The socket is built for stems measuring 0.27 inches down to 0.19 inches across the D-axis — measure yours before you order.
The critical check nobody should skip: this knob is marked with words like “OFF,” “IGNITE” and “MED” on the side. If your existing knob has no such lettering, the seller itself tells you not to buy — you want a W10594481 instead. The D-port can also feel tight on the very first push, and the maker suggests a drop of lubricating oil to help it slide home. That is a small task, not a flaw, and the stainless body should shrug off heat that would soften plastic.
Why It Pencils Out
- Stainless steel body with a metal interface insert and a reinforcing metal ring.
- Five knobs in the pack gives you a spare.
- Smooth, moderate rotation for adjusting flame size.
The Fine Print
- Only fits stems between 0.27 and 0.19 inches across the D-axis.
- First-time seating can be tight enough to want a little lubrication.
Best Match For: a range whose knobs carry “OFF” and “IGNITE” lettering and a stem in the 0.19–0.27 inch band.
Wrong Turn If: your old knob has no lettering on the side — that calls for the W10594481 family, not this one.
5. W10766544 Gas Stove Knobs Replacement (Funmit)
The stainless set that out-dials cheap plastic originals — and has the owner consensus to back the claim.
If your factory knobs were the flimsy plastic style, this is the set that feels like an upgrade rather than a repair. Each dial is stainless steel with a metal insert inside the D-shaped interface and a metal ring around the mounting face to stop it splitting. Owners describe them as sturdier than the original equipment, and the build quality is the single point the review base returns to most — it lands ahead of fit, which is the second most-discussed strength. That is a rare ordering for a small replacement part, and it tells you the material is what wins people over.
Fit covers Whirlpool gas ranges including WFG710H0AS0, WFG540H0AH0, WFG720H0AS0, WFG710H0AS1 and the WFG540H0AB and WFG540H0AE families. Each knob is 1.9 inches in diameter with a 1.4-inch height and a 0.2-inch D-shaped interface, and you get five in the pack. The knob also replaces 4248219, AP5958476, EAP10067059, PS10067059, W10430807, W10676228, AWP41411 and PD00038742, so an old part number gives you a fast cross-check.
The same lettering rule applies here as with the pack above: if your old knob has no “OFF” and “IGNITE” markings, the maker says stop and buy the W10594481 pattern instead. The watch-item is stability — the stability point draws more negative feedback than anything else on this listing, so press each knob fully onto the stem until it seats rather than leaving it proud. Do that and the stainless body handles burner heat with room to spare, which is exactly why it sits near the top of this list.
Owner Verdict: the consensus is that this set beats the plastic factory knobs for feel and durability, with fit running a close second as the most-praised trait.
The One Habit To Keep: seat each dial firmly on the stem — slight wobble is the most-reported annoyance when a knob is only half-pushed on.
This Is Your Set If: you own a WFG540, WFG710 or WFG720 and your old knobs say “OFF” and “IGNITE.”
Keep Looking If: your knob has no side lettering, or your model is not in the published fit list.
6. W10594481 Gas Stove Knobs for Whirlpool Range/Oven, 5 Pack
The plain-faced dial your newer Whirlpool range actually wants — no lettering, just a clean stainless cap.
Here is the set the other listings keep pointing you toward. Whenever a knob seller writes “if your knob has no OFF and IGNITE markings, you need W10594481,” this is that part. It fits Whirlpool gas ranges including WCG97US6DS00, WCG97US0DS00, WCG51US0DB00 and WCG55US0HS00, and it replaces WPW10594481, AP6023301, W10594481, 3281332, EAP10594481, PD00034064 and PS117566438. One limit worth flagging early: it is not suitable for models starting with WEG7.
The build copies the original knob’s proportions and then upgrades the material — stainless steel with an internal metal insert and an aluminum ring, finished with a frosted surface for a slip-resistant grip. The depth is listed at 0.55 inches, so it sits close to the panel rather than standing tall. Five knobs ship in the pack, and the attachment is push-pull, which means you slide the old one off and slide the new one on with no tools at all. The finish also does a quiet visual trick: owners who swapped out black plastic factory knobs note that the stainless looks better than what came off.
One ordering detail saves a return: check the D-shape of the shaft before you buy, because the seller flags that as the main mismatch risk. Fit is what most wins owners over on this listing, and the quality sits right behind it. For a newer cooktop where the lettered W10766544 knobs are simply wrong, this is the correct family and the stainless upgrade is the bonus.
Fit & Finish
- Stainless body with a metal insert and aluminum ring for durability.
- Frosted finish gives a slip-resistant grip under greasy fingers.
- No tools — slide the old knob off and push the new one on.
Check Before You Click
- Does not fit models starting with WEG7.
- D-shaft alignment has to be verified against your specific range.
Right For You If: your Whirlpool range is a WCG-series model with letter-free knobs.
Not For You If: your model code starts with WEG7 — those need a different part entirely.
7. Upgraded W11517334 Metal Knobs (MAHOOK)
Solid cast metal rated to 150°C — the pick for a cooktop that has already melted two plastic sets.
Most knobs on this list are a plastic body dressed up with a metal insert. This one is different in kind: it is solid cast metal, made for high-temperature stovetop environments, and the maker rates it to withstand prolonged exposure up to 150°C without deforming or cracking. It also carries a brushed stainless-steel surface texture that stays easy to wipe and keeps its look as the stove’s metal trim ages. If your last set split or warped, the material here is the reason to move up.
Dimensions are detailed and worth checking precisely: 2.04 inches overall height, 1.93 inches outer diameter, 0.48-inch D-bore depth, 0.24-inch inner diameter, and a 0.17-inch flat slot width. Against the white 8273104 set at 1.75 inches across, this is a chunkier dial with more metal in the hand. It weighs 12.8 ounces for the set, which gives the knobs a substantial, deliberate feel when you turn the flame up or down.
Fit is narrow and specific, and the seller is upfront about it. It suits Whirlpool gas ranges including WEG515S0FS0, WEG515S0FS2, WEG515S0FB0, WEG515S0FW0, WEG745H0FS0, WEG745H0FS1, WEG745H0FE0 and WEG745H0FH0, and it replaces W11517334, W11122869, W10850033, W11544663, W11679670, W11518484 and W11458842. It does not fit Whirlpool electric stove knobs, and it skips WEG515S0LZ2 and WEG515S0LZ3. The defining strength by owner consensus is quality, with fit right behind it. If your model is not listed, treat that as a stop sign, not a suggestion.
Heat Story: cast alloy rated to hold shape up to 150°C, which is the promise plastic cannot make near a burner.
Narrow Gate: a short, exact fit list — this rewards checking your model before ordering rather than after.
Buy It When: your range falls in the WEG515 or WEG745 families and you want the most durable dial on the list.
Move On When: your model is not on the list, or you have a Whirlpool electric stove — this is a gas-only part.
8. 5Pcs W11239985 W10850015 Stove Knob Replacement (MTZUL)
Polished chrome and a metal base for the owner who wants the knobs to look as solid as they feel.
This set leads with appearance in a way the others do not. The finish is polished chrome on a metal base, dimensions listed at 3 inches long by 2.2 inches wide, and it weighs 0.27 kg for the five-knob pack. The big visual win, by owner consensus, is how cleanly it matches a stainless Whirlpool range — the chrome reads as an intentional upgrade rather than a patch. The W11239985 control knob also has a metal base, which the seller pitches as sturdier than the plastic original.
Fit covers Whirlpool ranges including WFG525S0HZ0 and WFG525S0JZ0, WFG535S0JV0 and WFG535S0JZ0, and the full WFG550S0HV, WFG550S0HZ, WFG550S0LV and WFG550S0LZ families. It replaces 4845290, W11032553, PD00061875, AP6333411, PS12578779 and EAP12578779. One hard limit up front: it cannot replace W11122880, W10862482, W11159630, W11023139, W11366438, W11084623 or W10850010, and it does not fit the WFG520, WFG745 or WFG770 series. That exclusion list is long, so read it before you click.
The honest split here is durability and value. The materials are rated for wear resistance, heat resistance and aging resistance, and the thick solid ring is built to resist breakage — but owner opinion is divided on how long the set lasts and on whether it is worth the price. Treat those as open questions rather than certainties. Installation is straightforward: turn the power off, pull the old knob out, line up the mounting hole and push the new one on. For a newer WFG525 or WFG550 range that wants a chrome dial, this delivers the look with a metal backbone.
The Look: polished chrome over metal, sized for newer WFG525, WFG535 and WFG550 cooktops.
Read The Exclusions: a long no-fit list including the WFG520, WFG745 and WFG770 series — worth a second look before you order.
Consider This If: you own a WFG525, WFG535 or WFG550 and want polished chrome with a metal base.
Pass If: your model is in the no-fit list — the seller spells out the exclusions, so believe them.
Know the Specs
D-Shaft Interface
The D-shaft is a round socket with one flat side that grips a matching stem so the knob turns the valve instead of spinning free. Measure your stem’s flat-to-round width and compare it to the listed D-axis size — several sets here are built for a stem in the 0.19-inch to 0.27-inch band. A D-shaft that is too large will not grip; one that is too small will not slide on. This is the one measurement that decides whether a knob works at all.
Knob Material and Heat Rating
Plastic knobs are lighter and match many factory originals, but they soften under sustained burner heat. Metal and stainless knobs cost more and hold their shape longer. The cast-metal set here is rated to 150°C without deforming. If you cook at high heat often or your last set cracked or melted, the metal option is worth the step up.
Pack Size
Most sets ship as four or five knobs. Four covers a standard four-burner cooktop exactly; five leaves one spare for the burner closest to the heat. Buying a full set at once keeps the whole row matching, which is why a complete refresh beats replacing one knob at a time.
Part Number Cross-Reference
Your old knob’s number, printed on the base or molded on the underside, is the fastest route to a match. Each set here lists the numbers it replaces, from W10339442 to W10766544 to W11239985. Find your number, confirm it appears on the seller’s replacement list, and you are far less likely to order the wrong dial.
Common Questions
How do I know which Whirlpool gas range knob fits my stove?
What does the D-shaped shaft on a knob mean?
My old knob has no “OFF” or “IGNITE” lettering on the side — which set do I need?
Are metal knobs better than plastic knobs for a gas range?
How long should replacement knobs last?
Do I need tools to swap a gas range knob?
How many knobs should I buy at once?
Will a knob for a Whirlpool gas range fit a different brand of stove?
What if the replacement knob sits loose or wobbles on the stem?
Can these knobs handle the heat right next to a burner?
The Bottom Line
For most owners of a WFG320, WFG505, WFG510, WFG520 or WFG524 gas range, the 4 WPW10339442 Stove Knobs are the safest first order — a factory-style four-pack with a long published fitment list and a replacement number list you can cross-check before you buy. If your knobs carry “OFF” and “IGNITE” lettering and you want the durability upgrade, the W10766544 stainless set from Funmit is the one to reach for. And if your last set cracked or melted, step straight to the cast-metal W11517334 knobs — solid alloy rated to 150°C is the answer plastic cannot give.
Whatever you pick, do the one check that saves every return: match your model number and shaft shape to the fitment list before you click. Get that right and your cooktop is back to full control in minutes.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




