Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A washer full of standing water is the whole problem in one picture: wet clothes, a soaked drum, and a laundry day that stops dead. The fix is usually a small, cheap drain pump — but only if you buy the one whose part number actually matches your Cabrio. Get that number right and the swap is a screwdriver job. Get it wrong and you own a paperweight.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Below you will find the part numbers each pump replaces, the voltage and amperage figures printed on the label, and the honest weak spot on every option. Read on for the best whirlpool cabrio drain pump match for your machine and your patience level.
Top Picks



How To Choose The Best Whirlpool Cabrio Drain Pump
A drain pump is a motor with an impeller inside a plastic housing. It spins during the drain cycle and pushes the dirty water out through the hose. If yours has seized, clogged or cracked, the drum holds water and the machine throws an error code. Choosing the right replacement is mostly a paperwork job done before you pick up a screwdriver.
Start with the part number, not the brand
Every pump carries a number stamped on the housing — W10536347, W10876600, W10276397, W10409079 and so on. That number is the only reliable link to your machine. Pull the old pump or check the parts diagram for your model, then buy the pump that lists that exact number as a replacement. A pump that lists your number is a fit; a pump that merely mentions your brand is a guess.
Check the electrical figures against your washer’s label
Pumps in this group run on household current, and several list their rating openly — 120V, 60Hz, 0.95A and 85W are common. Those figures need to sit inside what your washer supplies. A pump with a wildly different rating is a mismatch even if the housing looks identical.
Know which symptoms the pump actually fixes
A pump that will not drain, drains slowly, hums without spinning, or trips an error code is a pump problem. A pump that leaks at the housing seam or around the hose connection is also a pump problem. Wet clothes at the end of a cycle can be a pump that is weak rather than dead. A machine that fills but never agitates is not a pump issue at all.
Look at what comes in the box
Mounting screws, hose clamps and a shield cover are the small parts that stall a repair halfway through. A pump that ships with its own clamps and screws saves you a second order. A pump with none of it means reusing tired hardware from the old unit.
Decide how much warranty you want to lean on
Some pumps carry a long after-sales guarantee, some carry a short defective-return window, and some carry none stated on the listing at all. If your last pump failed early, the guarantee is the part worth paying attention to.
Side-by-Side Comparison
| Model | Best For | Replaces Part # | Electrical Rating | In the Box | Amazon |
|---|---|---|---|---|---|
| OEM Washer Pump W10876600★ Best Overall | Most Cabrio owners | W10876600, W10727777 | 120V | 1 pump | Amazon |
| W10276397 Washer Drain Pump by BeaquicyBest Cross-Brand Fit | Cross-brand Kenmore and Maytag homes | WPW10276397, WPW10276397VP, 1874334, B40-3A, AP6018417, PS11751719, LP397 | 85W, 120V, 0.95A, 60Hz | 1 pump | Amazon |
| W10536347 W10155921 W10049390 by BeaquicyScrews Included | Back-of-washer pump swaps | W10536347, W10155921, W10049390, W10217134, W10281682, AP5650269 | 120V, 60Hz, 85W, 0.95A | 1 pump, 3 mounting screws | Amazon |
| OEM Pump W10536347 | Fastest straight swap | W10536347 | — | 1 pump, 3 spare mounting screws | Amazon |
| ClimaTek Washing Machine Drain Pump | Maytag and Kenmore cross-fits | W10876600, W10727777, B25-3A04, AP6004933, 4455877, W1087600VP, PS11738156 | — | 1 pump | Amazon |
| Whirlpool W10409079 Drain Pump-Water | Genuine-part loyalists | W10409079 | — | 1 pump | Amazon |
| Whirlpool W10536347 Pump Drain | Older washers, ten-minute swaps | W10536347 | — | 1 pump | Amazon |
Detailed Reviews
1. OEM Washer Pump W10876600
Our pick — 4.5+★ from 300+ verified ratings; the strongest balance of quality and price.
One pump number covers the widest Cabrio spread here — and it drops straight in.
If your Cabrio’s parts sticker reads W10876600 or W10727777, this is the pump to buy. The listing names more than 100 Whirlpool and Maytag model codes, a long run of Kenmore numbers and a couple of Crosley units. That breadth is the reason it sits at the top of this list — most Cabrio owners will find their machine named somewhere in that roster.
Its 4.5+ out of 5 rating is the highest in this group, and buyers report it drains the drum cleanly. Owners mention the machine runs exactly as it did before the failure. The installation notes tell the same story: the swap goes faster than expected, and one customer finished it in less than 45 minutes. The part is a straight physical match, so your hoses and clamps line up the way the old ones did.
The catch is the same as on every OEM-style pump: you must find your washer’s model plate and confirm the number before you order. The listing is a compatibility wall of text, not a search box. If your model code is not in the roster, this is not your pump, no matter how close the housing looks.
What earns it the top spot
- Covers 100+ Whirlpool and Maytag model codes plus a long Kenmore list
- Replaces both W10876600 and W10727777 with one part
- 120V rating matches standard household washer supply
- Highest rating in this group, and the fitment feedback backs it up
Where it asks you to do homework
- You must match your model code against a very long list before ordering
- Ships as the pump alone — no screws or clamps in the box
Reach for this if: your Cabrio or Maytag top-loader lists W10876600 or W10727777 as its pump number and you want the widest fitment net in this group.
Look elsewhere if: you cannot find your model code in the compatibility list — the ClimaTek pump covers a different set of numbers and may be the better match.
2. W10276397 Washer Drain Pump by Beaquicy
Built for the mixed-brand laundry room where Kenmore, Maytag and Whirlpool share a hallway.
The spec sheet here is unusually open for a repair part. This pump runs at 85W, 120V, 0.95A and 60Hz, rated Class 105, and measures 6.24 inches long by 2.4 inches wide by 3.64 inches high. It weighs 1.9 pounds. The housing is ABS plastic with stainless steel inside, which is the combination that keeps a wet part from rusting from the water vapour sitting in a washer.
what separates it from the W10876600 above is the replacement list. This pump covers WPW10276397, WPW10276397VP, 1874334, B40-3A, AP6018417, PS11751719 and LP397 — a set the other pump does not touch. The listing also names fitment for Kenmore, Maytag, Whirlpool, Amana, Crosley, Roper and Inglis Admiral machines. It claims to fix a long symptom list: noisy operation, no drain or slow drain, a ruptured pump, a pump that spins but leaves clothes wet, leaks, and the F9 E1 error code (a fault code your washer shows when it cannot drain).
Here is the honest part. Strong drain performance wins people over, but longevity is the recurring gripe on this pump — some units stop working well short of a year, and one buyer reports the part lasted only about 2.5 months after installation. Beaquicy backs it with a ten-year after-sales guarantee, so keep your order record where you can find it. Installation is a screwdriver-and-channel-lock job, and the listing walks you through shutting off power and water, swapping the pump and checking for leaks.
Match it by number: the value here is the replacement list, not the housing shape — if your washer diagram shows WPW10276397 or B40-3A, this is the one that lines up.
Worth it when: your machine carries a WPW10276397-family number and you want a long guarantee standing behind a low-cost part.
Think twice if: you have already replaced this pump once under a different brand and want a different failure profile this time.
3. W10536347 W10155921 W10049390 by Beaquicy
The one that shows up with the screws, the clamps and a cover already fitted.
This is the back-of-the-washer pump, and the listing says so plainly: it sits at the rear of the machine and switches on after the spin speed is held for a set period, pushing the water out on the drain cycle. It runs on 120V, 60Hz, 85W and 0.95A (volts, frequency, watts and amps — standard household power figures). It weighs 2.2 pounds and measures 8.3 inches by 6.5 inches by 3.94 inches, so it has the bulkier housing in this group — check the space behind your washer before you order.
What you get in the box is the differentiator. Alongside the pump you get 3 mounting screws, metal clamps already fixed to the bend so they do not drop off mid-job, and a shield cover over the pump to keep moisture off it. The replacement list is broad — 2392433, 8542672, AP5650269, W10049390, W10155921, W10217134, W10281682 and PS5136124 are all named, and the fitment list runs through Whirlpool, Kenmore and Maytag model codes from the MVWB and WTW families.
The trade-off shows up over time. The drain function is reliable enough to make this a popular pick, but durability draws the most dissent of any point on this listing, and leaks show up in the feedback too. If you are replacing a pump that died young, that history is worth weighing against the convenience of getting screws in the box.
Why the box contents matter
- 3 mounting screws included, so no second order mid-repair
- Metal clamps fixed to the bend so they stay put during the swap
- Shield cover protects the pump from moisture
- Fixes leaks, no-drain, noisy running, LD error and a pump that will not spin
The part you should weigh
- Longevity is the weak point in the feedback, with some units falling short of a year
- Leak reports appear alongside the drain complaints
Pick this one when: your washer diagram names W10536347 or any of its cousins and you want every small fitting in one box.
Give it a miss if: you want the longest-proven service life in this group and are willing to pay for a factory-branded part instead.
4. OEM Pump W10536347
Same part number as the pick above, sold as the exact OEM unit with a spare set of screws.
The number on the housing is W10536347, and that single fact is the whole sales pitch. This pump claims the exact same fit and function as the factory part, and it arrives with 3 spare mounting screws. It weighs 2.29 pounds, slightly heavier than the Beaquicy version of the same number, and it has been on sale since November 2018 — long enough that the fitment list is mature rather than optimistic.
That list is worth reading closely. It claims fitment across about 60 Kenmore codes in the 11027 and 11028 families and roughly 120 Whirlpool, Maytag and affiliated codes, including the MVWB, MTW and WTW6200 through WTW7990 ranges. If your machine falls inside that spread, the odds of a straight drop-in are good.
Buyers describe the swap as a few minutes of work, and the fit is the point they keep returning to. Compare it with the Beaquicy W10536347 above and the difference is in the paperwork: this one leans on the OEM claim and a lighter housing, while the other throws in clamps and a shield cover. Neither lists its wattage or amperage openly, so if those figures matter to your decision, the W10276397 and the W10536347 Beaquicy entry both print theirs.
The straightforward read: this is the least dramatic purchase in the group — the right number, the right shape, and nothing extra to think about once it is in.
Suits you if: your washer calls for W10536347 and you would rather have the OEM-claimed part than a branded alternative with extra fittings.
Skip the comparison if: you need a published wattage or amperage figure before you buy — this listing does not print one.
5. OEM Pump W10730972 & W10130913
A direct replacement with the same part numbers as the top pick, sold by a different name.
Read the replacement list here and you will see W10876600 and W10727777 — the same two numbers that carry the OEM pump at the top of this list. ClimaTek also covers B25-3A04, AP6004933, 4455877, W1087600VP and PS11738156, so it picks up where the other listing stops. It is built for Whirlpool, Maytag, Amana, Kenmore and Sears units, weighs 1.8 pounds, and the plastic housing measures 5 inches by 8 inches by 6 inches.
The appeal is the direct-replacement claim. Buyers describe a pump that works and goes in without a fight, and the fitment comments often single out Maytag machines specifically. If your Cabrio’s number is W10876600 and the OEM listing is out of stock or you simply want a second source for the same fit, this is the alternate route.
The honest limit is the depth of the track record. This listing carries a fraction of the owner history of the top pick, so there is less evidence to draw on when you weigh how long it will last. It also lists no wattage or amperage, so if you want those figures printed before you buy, the W10276397 and the W10536347 Beaquicy entries give you more to work with.
Where the value sits
- Replaces W10876600 and W10727777, the same core numbers as the best overall pick
- Also covers B25-3A04, AP6004933, 4455877, W1087600VP and PS11738156
- Fitment spans Whirlpool, Maytag, Amana, Kenmore and Sears
- Light at 1.8 pounds, so it handles easily during the swap
What to keep in mind
- Shorter track record than the OEM pump it mirrors
- No electrical figures published on the listing
The second source: use this when your machine calls for W10876600 or W10727777 and you want another route to the same fit.
One caution: with fewer owner miles behind it than the OEM equivalent, buy it understanding you are trading track record for availability.
6. Whirlpool W10409079 Drain Pump-Water
The factory-branded pump with the Whirlpool name cast into the part itself.
The number is W10409079 and the maker is Whirlpool Corporation, which is the difference you are paying for. The housing is plastic with stainless steel inside, it weighs 1.7 pounds, and it is listed specifically as a washing machine drain pump replacement. Nothing exotic in the spec sheet — the point is the pedigree, not the extras.
Quality is the thing that wins people over here, and the drain fix lands where it should: customers note it sorting out drain trouble and fitting cleanly, with one noting it was perfect for their Whirlpool Platinum Cabrio. Maytag Bravo XL owners appear in the feedback too, which widens its usefulness beyond the Cabrio badge.
What you give up is in the details. There is no mounting hardware, no shield cover and no spare clamps in the box — it is the pump and nothing else. The warranty is a 30-day return window with 90 days on defective units, far shorter than the ten-year after-sales guarantee on the Beaquicy W10276397. If your last pump died early and you want long cover, that trade is the one to think about.
Genuine, plain and simple: the whole reason to choose this one is that the part is stamped by the company that built the washer.
Choose it when: your diagram reads W10409079 and you want the factory part with the factory name on it.
Weigh the cover: 30 days for returns and 90 for defects is short cover for a repair part — if a long guarantee matters more, the Beaquicy listings run longer.
7. Whirlpool W10536347 Pump Drain
The factory version of the W10536347 — same number as two picks above, built by Whirlpool.
Three pumps in this article answer to the number W10536347, and this is the one Whirlpool makes itself. The housing is stainless steel, it weighs 1.3 pounds, and it carries the shortest measured install story in the group: the swap reportedly takes about 10 minutes. That figure matters if your washer is boxed into a tight laundry closet and you want the machine back in service the same afternoon.
It fits well, and the feedback skews toward older machines in particular — owners of ageing top-loaders get the cleanest result. Buyers also consistently note the cost of the part against the cost of the alternative, which for a drain pump is the difference between a small repair and a new appliance.
The catch is warranty cover. This one comes with a 30-day return window and 90 days on defective units, so you get a season of protection rather than a decade. Compared with the Beaquicy W10536347 above, which ships with clamps and a shield cover, this is the plainer box with the factory name on the housing.
Speed is the pitch: if getting the washer running again in a single sitting is the priority, this is the fastest-reported swap here.
This one is for you if: your machine takes W10536347 and you want the Whirlpool-built part with the quickest reported install.
Consider the alternative if: you want fittings in the box and a longer guarantee — the Beaquicy W10536347 covers both.
Know the Specs
Part number and replacement list
The number stamped on the pump housing is the only sure link to your washer. A listing that names your number as a replacement is a fit. A listing that only names your brand is a gamble. Several pumps here cover a dozen or more retired numbers, which is what lets an older machine still find a working part.
Voltage and amperage
These figures tell you the pump’s appetite for household current. The listings that publish them show 120V, 60Hz, 0.95A and 85W, with one older pump at 115V. Check those against your washer’s own label. A pump rated far outside that range is the wrong part even if the housing looks right.
Drain cycle behaviour
A drain pump spins after the wash and rinse stages hold their spin speed for a set period, then pushes the water out through the hose. That is why a failing pump shows up as standing water, wet clothes or an error code rather than as a wash-quality problem. The wash itself is usually fine.
Mounting hardware and cover
Three screws, a pair of metal clamps and a shield cover are the small parts that decide whether a repair finishes in one sitting. A shield cover keeps moisture off the pump body. Clamps fixed to the bend stay put while you work. If those are not in the box, you are reusing old hardware.
Weight and housing size
Pumps here run from 1.3 pounds to 2.29 pounds. That range matters when you are reaching into the back of a washer with one hand. A lighter housing is easier to seat. A heavier one often packs more material around the motor.
Warranty and return windows
Cover varies widely in this group. Cover ranges from a ten-year after-sales guarantee to a 365-day window to 30 days for returns with 90 days on defects. If a pump has failed on you before, the length of that window is as important as the part number.
Common Questions
How do I know which drain pump fits my Whirlpool Cabrio?
What does a drain pump actually do during the cycle?
Does a pump that will not drain always mean the pump is bad?
What tools do I need to swap a Cabrio drain pump?
How long should a replacement drain pump last?
Is a genuine Whirlpool pump better than a compatible one?
Why do some listings include screws and clamps and others do not?
Can I fit a Maytag or Kenmore pump to a Whirlpool Cabrio?
What should I check right after installing a new drain pump?
Is the electrical rating on a pump something I need to match?
The Bottom Line
For most laundry rooms, the whirlpool cabrio drain pump to buy is the OEM Washer Pump W10876600. It covers 100+ Whirlpool and Maytag model codes plus a long Kenmore list, it also replaces W10727777, and it holds the highest rating in this group. If your diagram shows a WPW10276397 or B40-3A number, the W10276397 by Beaquicy reaches replacements none of the others touch. And for a straightforward W10536347 swap where you want the screws, clamps and shield cover in the same box, the Beaquicy W10536347 is the one to order.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.



