Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
The worst wheel mistake isn’t picking the wrong finish — it’s buying a rim that won’t bolt onto your Fusion at all. Every wheel here uses the 5x108mm bolt pattern (the five-lug spacing Ford uses on the Fusion), so your real decision depends on model year, rim diameter, and how much you care about looks versus a plain factory match. Match the year of your car to the wheel first, then decide on size and finish.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
A Fusion wheel has to clear the brake caliper, carry the car’s weight, and take a tire that matches the rim width — get those three right and the rest is cosmetic. Here’s my breakdown of the wheels for a ford fusion.
Top Picks


How To Choose Wheels for a Ford Fusion
The Fusion changed body style across its run, and a rim built for one generation won’t always clear the brakes and fenders of another. Year fitment is the first filter — most of these wheels list the exact model years they’re engineered for on the listing. Confirm yours, then work through the numbers below.
Bolt pattern and hub bore: the fitment gate
The bolt pattern (the spacing of the lug holes) on the Fusion is 5x108mm — five lugs on a 108mm circle. A wheel with any other pattern will not bolt on, full stop. Hub bore (the center hole that seats over the hub) needs to match too, or the wheel won’t sit centered on the axle. A mismatched bore can be corrected with a hub ring, but buying the right bore from the start is simpler.
Load index: the number that carries your car
Load index tells you how much weight the wheel is rated to carry. Passenger-car wheels in this class list figures that vary widely between listings, and a wheel rated too low for a loaded Fusion is a safety concern, not a cosmetic one. Check the index on the listing against what your current wheels carry.
Tire size and rim width
A 17×7 wheel and a 17×7.5 wheel both take a 17-inch tire, but not the same width. The 2010-2012 factory fit uses 225/50R17, and the 2017-2018 18-inch wheel pairs with 235/45R18. Going wider than the tire is designed for stretches the sidewall and changes how the car steers, so match the pair.
Steel or alloy — and what’s in the box
Steel wheels are heavier and bend rather than crack, which some drivers prefer for winter. Alloy wheels are lighter and finish better. Either way, the wheel alone usually ships without tire, TPMS sensor (the pressure monitor inside the valve stem), lug nuts, or center cap — budget for those separately so you’re not stuck mid-install.
Side-by-Side Comparison
| Model | Best For | Rim Size | Bolt Pattern / Offset | Wheel Weight | Amazon |
|---|---|---|---|---|---|
| Road Ready 17 Inch Painted Black Rim (2010-2012)★ Best Overall | Direct factory replacement on a 2010-2012 Fusion | 17 inches | — | 26.5 lb | Amazon |
| Road Ready 17×7.5 Black Steel (2010-2012)Steel-Wheel Value | Steel-wheel durability on the same generation | 17×7.5 inches | — | 27.1 lb | Amazon |
| 18×8 Metallic Silver Alloy Rim (2013-2016) | Factory-look silver upgrade on 2013-2016 models | 18×8 inches | 5x108mm / 55mm | 28 lb | Amazon |
| WheelerShip Machined Alloy 17×7 (2006-2009) | Machined-finish alloy for the first-gen Fusion | 17×7 inches | — | 31.1 lb | Amazon |
| Velospinner 18×8 Machined Charcoal (2017-2018) | New, never-refurbished OEM-design rim for 2017-2018 | 18×8 inches | 5x108mm / 55mm | 25 lb | Amazon |
Detailed Reviews
1. Ford Fusion 17 Inch Painted Black Rim
Our pick — 4.5+★ from 150+ verified ratings; the strongest balance of quality and price.
For a bent or scuffed factory rim on a 2010-2012 Fusion, this is the no-drama fix.
This is the replacement a Fusion owner reaches for when a pothole has taken out a single wheel and they want the car looking stock again by the weekend. It’s 17 inches across and weighs 26.5 pounds, wrapped in painted black steel — a finish that hides road grime far better than raw silver. The load index of 1488 is the standout: that’s the weight rating the wheel is built to carry, and it towers over the 99 listed on the 18-inch silver alloy further down. For a passenger sedan carrying people and cargo, a higher load figure means less risk of a wheel failing under a full load.
Road Ready engineers these to factory specs, so the lug holes line up with your original hardware on the first try — no re-drilling, no adapter rings, no chase for a matching part number. Build quality is the draw here, with fit a close second. The listing does spell out the catch, though: the wheel ships bare, so your factory TPMS sensor, lug nuts, valve stem, and center cap must be pulled off the old rim or bought separately. Plan for a press-out and a trip to the parts counter before install day.
Why It Earns the Top Spot
- Load index of 1488 is the highest rating among the picks here — the most weight capacity for a loaded car
- Painted black finish is hard to scuff and easy to touch up on steel
- Engineered to factory specs for a first-try fit on 2010-2012 Fusions
- 17-inch diameter matches the factory 225/50R17 tire many owners already have
What to Know Before You Buy
- Ships without tire, TPMS sensor, lug nuts, valve stem, or wheel cover
- Steel is heavier than alloy — 26.5 pounds bare
- Fitment is locked to the 2010-2012 run, so it won’t help later Fusions
Grab it if: you drive a 2010-2012 Fusion and want a factory-look rim with the highest weight rating here.
Keep browsing if: your Fusion is a later generation or you’re holding out for an alloy finish.
2. Ford Fusion 17×7.5 Black Steel
A half-inch wider steel rim built for the same 2010-2012 Fusion — and the same 225/50R17 tire.
The difference between this and the pick above is the width: this one measures 17×7.5 inches instead of 17×7. That half inch matters if you’re mounting a slightly wider tire or want a touch more contact patch. It weighs 27.1 pounds bare — a hair heavier than the 26.5-pound 17-inch rim above, which is the trade you make for the extra width. The listing pins the OEM tire size at 225/50R17, so if your car already wears that size, the match is clean and you’re not hunting for a new set of tires.
Fit and value are the strong suits — this is the spare-rim purchase for someone who doesn’t want to touch the tire they already own. The load index here reads 1322, which is a real number to note. It’s a step below the 1488 on the top pick, so if you regularly load the Fusion with passengers and cargo, the higher rating is worth the look. An occasional buyer mounts a winter tire on this rim and swaps the set seasonally, which is the classic steel-wheel use case.
The honest read: Same brand, same build-to-spec approach, slightly wider — but lower on the weight rating and a little heavier than its 17×7 sibling.
Where it fits: Best for the driver who already runs 225/50R17 tires and wants a spare or a winter wheel without a full set.
Reach for this if: you’re on 225/50R17 tires and want the wider steel rim for a single-wheel replacement.
Think twice if: you carry heavy loads often — the 1488 load index on the top pick gives you more headroom.
3. 18×8 Metallic Silver Alloy Wheel Rim for Ford Fusion 2013-16
An 18-inch silver alloy that puts the 2013-2016 Fusion back to factory showroom spec.
If your 2013, 2014, 2015, or 2016 Fusion wore silver alloys when it left the lot, this is the rim that restores it — not a generic aftermarket wheel, but a part built to the Fusion’s own numbers. It’s 18×8 inches, with a 5x108mm bolt pattern, 55mm offset, and 63.4mm hub bore, all matching the factory part (DS7Z1007K). The clearcoat over the silver paint keeps road salt and brake dust from etching the finish.
It’s strength-tested in the United States by an independent company and guaranteed to balance, so you’re not chasing a highway-speed vibration. Its load index (a rating of how much weight the wheel can carry) is 99, the lightest-rated in this group, so it’s built for a passenger car rather than a payload. The listing is clear on one detail: this is one wheel only, and the center cap, lugs, and tire pressure sensor are not in the box.
Finish that lasts: The clearcoat is the difference between a wheel that looks stock for years and one that dulls after a couple of winters.
Bring the small parts: Budget for a center cap even though the wheel ships without one — the exposed hub looks unfinished otherwise.
Made for: the 2013-2016 Fusion owner who wants the exact factory silver look, part number match included.
Not your fit: a 2010-2012 or 2017-2018 Fusion — those years take a different rim.
4. Ford Fusion 17×7 Aluminum Alloy Wheel 3628
The first-generation Fusion’s machined alloy — cast from A356 aluminum and JWL certified.
Here’s a pick aimed squarely at the 2006-2009 Fusion, the original run most aftermarket listings ignore. It’s a 17×7-inch wheel machined from A356 cast aluminum, a common alloy for passenger-car rims because it’s stiff and light enough for daily driving. JWL certification means the wheel passed a run of durability tests, so it isn’t an untested casting. It replaces part number 7E5C-1007-BA and carries the machining marks that give it a bright, turned-metal look against silver paint.
Weigh in your hands and the trade-off shows up fast: this one is 31.1 pounds, the heaviest wheel in the group, against 25 pounds on the 18-inch Velospinner. That heft is what a solid casting looks like, and some drivers find it reassuring — but it’s still weight your suspension is carrying every mile. It also looks the most expensive of the five without costing like it, which suits a first-gen Fusion restoration on a sensible budget.
The build case: A356 cast aluminum and JWL certification mean the wheel is engineered and independently tested, not just moulded.
A note on weight: At 31.1 pounds it is heavier than the 25-pound Velospinner — heavier wheels can dull steering response a touch, so weigh that against the sturdy casting.
Pick this: for a 2006-2009 Fusion, where the fit list is short and the finish quality is a real step up over plain steel.
Skip it: if your Fusion is a 2010 or later — the part number is locked to the first-generation car.
5. Ford Fusion 18×8 Inch Wheel
A brand-new rim for the 2017-2018 Fusion, in the charcoal-and-machined finish those cars ran from the factory.
Late-model Fusion owners usually get steered toward refurbished rims, and that’s the gap this wheel fills — it’s new, never welded, never repaired, so you’re not inheriting someone else’s curb rash. It measures 18×8 inches with a 5x108mm bolt pattern, 55mm offset, and 63.4mm hub bore, and pairs with a 235/45R18 tire. The 20-spoke machined charcoal face is the OEM design, which means the car will look correct at a glance rather than slightly off.
Weight is where this one quietly leads: 25 pounds, the lightest of the bunch, against 31.1 pounds on the WheelerShip — 6.1 pounds lighter on a wheel that spins. Less unsprung weight at each corner lets the suspension react more cleanly over bumps. Velospinner builds it to OEM tolerances for load capacity, runout, and impact resistance, and confirms it accepts the factory TPMS sensors and lug nuts. One thing to line up: tires, sensors, lugs, and covers all have to be bought separately.
What Makes It Stand Out
- New construction — not refurbished, welded, or repaired
- At 25 pounds, it’s 6.1 pounds lighter than the 31.1-pound WheelerShip
- OEM 20-spoke machined charcoal design matches the factory look
- Verified fitment for the 2017-2018 Fusion with 235/45R18 tires
The Fine Print
- One wheel only — tires, TPMS sensors, lug nuts, and covers sold separately
- Locked to the 2017-2018 model years
- Charcoal finish shows brake dust more readily than light silver
Your match if: you own a 2017 or 2018 Fusion and want a fresh, never-refurbished OEM-design rim.
Look past it if: your Fusion falls outside those two model years.
Know the Specs
Bolt Pattern and Hub Bore
The bolt pattern is the lug-hole spacing — 5x108mm on the Fusion, meaning five lugs on a 108mm circle. A wheel with a different pattern simply won’t bolt on. Hub bore is the center hole that seats over the hub; on the 18-inch wheels here it’s 63.4mm. A bore that’s too large can be shimmed with a hub ring, but the right bore from the start keeps the wheel centered without extra parts.
Load Index
Load index is the weight the wheel is rated to carry — a higher number means more capacity. The figures across these picks run from 99 up to 1488, and that spread tells you they’re built for different jobs. Match the index to what your factory wheels carry and how heavily you load the car. A rating that’s lower than your use demands is a safety question, not a style one.
Offset and Diameter
Offset is how far the mounting face sits from the wheel’s centerline, and on the 18-inch Fusion wheels here it’s 55mm. Offset controls where the wheel sits relative to the fender — too far in and it rubs the suspension, too far out and it pokes past the body. Rim diameter (17 or 18 inches) has to match the tire you plan to run, and it also affects how much sidewall you get over bumps.
Steel Versus Alloy
Steel rims are heavier and bend before they crack, which some drivers prefer for winter abuse. Alloy rims — like the A356 cast aluminum and machined finishes on a few picks here — are lighter and take a nicer finish. Whichever you pick, note what’s in the box: most ship bare, so reuse or buy your TPMS sensor, lugs, and center cap.
Common Questions
Will a 17-inch Fusion wheel fit where an 18-inch wheel was?
What bolt pattern does a Ford Fusion use?
Do these wheels come with TPMS sensors and lug nuts?
Can I replace just one Fusion wheel instead of a full set?
What’s the difference between these wheels and a generic aftermarket rim?
Does the load index rating matter for a passenger car like the Fusion?
Is a steel wheel or an alloy wheel better for winter driving?
Will an 18-inch wheel fit on a 2013-2016 Fusion?
Do I need to rebalance a new wheel after mounting a tire?
The Bottom Line
If you drive a 2010-2012 Fusion, the Road Ready 17 Inch Painted Black Rim is the one to order — it matches the factory fit and carries a load index of 1488, the most weight capacity of any wheel here. Want the silver factory look on a 2013-2016 car? The 18×8 Metallic Silver Alloy is the exact part-number match, clearcoat and all. And for a 2017-2018 Fusion that deserves a brand-new rim rather than a refurb, the Velospinner 18×8 Machined Charcoal is the lightest and freshest of the bunch. Whichever year you own, buy the wheel built for your generation — fitment beats finish every time.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.


