9 Best Wheel to Wheel Running Boards | 900 Pounds Of Step

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

A quick note on sizes: not every pick below is the exact size or number you searched — where the exact one is scarce, the nearest same-type option that serves the same purpose is included so you get real, in-stock choices. Each pick’s actual specs are listed.

A wheel-to-wheel running board is the difference between climbing into your cab and actually walking along the side of your truck. Standard cab-length boards stop at the rear door, so reaching a roof rack or hauling gear out of the bed still means stretching over the wheel well. Full-length boards bridge that gap by running from the rear edge of the front wheel well to the front edge of the rear one.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

One thing to know before you scroll: fitment comes first with running boards, and the picks below are matched to the nearest same-type length and cab configuration rather than one universal size. Use this list to find comparable full-length coverage that serves the same purpose for your truck, and check the cab and bed details on each pair of wheel to wheel running boards carefully before you order.

Top Picks

APS Wheel to Wheel Running Boards 5in (Chevy Silverado / GMC Sierra Crew Cab 5.5ft Short Bed)
Best OverallAPS Wheel to Wheel Running Boards 5in4.5+★500+ ratingsPolished 304 stainless that runs the full length and shrugs off road salt. If your Silverado or Sierra crew cab rides on the 5.5ft short bed, this is the set that covers the whole cab without leaving a hole at the rear wheel.Check price on Amazon
Binary Star Running Boards Compatible with 2019-2026 Silverado / Sierra 1500
Most VersatileBinary Star Running Boards4.5+★70+ ratingsFour steps, eight brackets, and a rear platform built for loading the roof. Step count changes what a board can do for you.Check price on Amazon
APS Wheel to Wheel Side Steps 6in (Chevy Silverado / GMC Sierra Double Cab Extended Cab 8ft Bed)
Long Bed WorkhorseAPS Wheel to Wheel Side Steps 6in4.0+★350+ ratingsThe 8ft bed build: 114 inches of bar and a 6-inch step the whole way down. Long beds need long boards, and this set is the biggest in the article at 114 x 6 x 1.5 inches and 78.1 pounds.Check price on Amazon

How To Choose The Best Wheel to Wheel Running Boards

The single biggest mistake buyers make is ordering the right board in the wrong length for their bed. Wheel-to-wheel boards are cut to specific cab and bed combinations, so a set built for a 5.5ft bed will not line up on a 6.5ft truck even if both are Silverados. Lock your cab and bed measurements before anything else.

Measure your cab and bed, not your door count

Boards are listed against exact configurations like Crew Cab 5.5ft Short Bed or Double Cab Extended Cab 8ft Bed. Two trucks with four doors can still carry different boards. Check the fitment line against the sticker on your driver’s door jamb, because a Double Cab, an Extended Cab, and a Crew Cab are three separate patterns.

Match the step count to how you use the truck

A two-step board covers cab entry and exit only. A four-step or five-step board adds a small center step and a rear platform near the wheel, so you can reach roof racks, tool boxes, and cargo without climbing into the bed. If you load a roof rack or haul lumber, the extra stepping points do real work every week.

Understand what the material means over five winters

304 stainless steel resists corrosion best and carries a Limited 3-Year Warranty on the APS sets. Carbon steel with a powder coat is strong and costs less, but road salt finds every chip. Aircraft aluminum keeps the weight down, which matters if you remove the boards seasonally.

Find out if you need a drill

Some boards use a rocker panel mount that drops into factory holes with no drilling, while others list drilling required. A no-drill bolt-on set turns the job into an afternoon. A drilled install needs a steady hand and a rust-treatment plan for fresh metal.

Side-by-Side Comparison

Model Best For Bar Length Load Capacity Material Amazon
APS Wheel to Wheel 5in (Silverado/Sierra Crew 5.5ft)★ Best Overall All-round full-length coverage 96 inches 500 lbs 304 stainless steel Amazon
Binary Star for Silverado/Sierra 1500Most Versatile Maximum step count and bed access — 500 lbs Carbon steel Amazon
APS Wheel to Wheel 6in (Silverado/Sierra Extended 8ft)Long Bed Workhorse 8ft bed work trucks 104 inches 500 lbs 6061 aircraft aluminum Amazon
OEDRO for Tacoma Double/Crew Cab Lifted Tacomas and oversized tires 80.0 inches 550 lbs Carbon steel Amazon
Off Roader Eboard 6in Silver Polished looks and easy lifting 104 inches — Aircraft grade aluminum Amazon

Detailed Reviews

★ Best Overall

1. APS Wheel to Wheel Running Boards 5in

Our pick — 4.5+★ from 500+ verified ratings; the strongest balance of quality and price.

304 Stainless Steel5in Full-Length Step Pad

Polished 304 stainless that runs the full length and shrugs off road salt.

If your Silverado or Sierra crew cab rides on the 5.5ft short bed, this is the set that covers the whole cab without leaving a hole at the rear wheel. It carries a 500 lbs load capacity and spans 96 inches of bar length in stainless steel, so winter salt does not chew through the finish the way it eats painted steel. The 5″ wide corrugated non-slip step pad runs the entire length of the board, not just under the doors, so it still gives you grip when you shuffle back toward the bed.

What wins people over is the build quality: the mounting brackets are heavy-duty, and the boards line up with the truck’s existing holes so the install is a straight bolt-on. Owners routinely finish the bolt-on install in a bit over an hour in the driveway. The brushed stainless finish reads close to an OEM look rather than a bolt-on accessory, which is why it holds its appearance over the years instead of fading. A Limited 3-Year Warranty backs the corrosion protection.

One honest catch: the instructions are the weak link. The paperwork is thin, so plan on watching a video for your exact year before you start. Note that this set uses a wheel-to-wheel butt joint design, which means you assemble the bar before mounting it — a two-person job. Against the 6-inch aluminum APS set further down, this one is 66.4 pounds, so it is easier to hoist into place alone. It earns the top spot on 4.5+ stars across 500+ owner ratings, with 304 stainless coverage at a price the aluminum sets do not match.

What holds up

  • 304 stainless steel with a Limited 3-Year Warranty handles salt and rain
  • 5″ non-slip pad covers the whole board, so there is no bare metal where you step near the bed
  • Bolt-on fit into factory holes keeps the install under two hours

Where it stumbles

  • The included instructions leave you guessing on torque and sequence
  • Butt-joint assembly means you need a second set of hands to line it up

Reach for this if: you drive a 2007–2018 Silverado or Sierra crew cab with the 5.5ft bed and want full-length stainless coverage that lasts.

Look elsewhere if: you need the boards to fit a 6.5ft bed or a double cab — this set is cut for the short bed.

Most Versatile

2. Binary Star Running Boards

4-Step Design8 Brackets

Four steps, eight brackets, and a rear platform built for loading the roof.

Step count changes what a board can do for you. Two wide main steps get you into the cab, then a small center step and a dedicated bed access step sit near the rear wheel. That rear platform is the part buyers talk about: two people can stand on it at the same time to lift heavy cargo onto the roof. If you load a roof rack or bed regularly, the four-step layout pays off; for cab entry alone, a two-step board is enough.

The frame is thick carbon steel around a 2″ reinforced main tube with triangular welding, rated to 500 lbs. Each side hangs on four heavy-duty brackets for eight total, and that bracket count is what kills the wobble under a full load. Three-layer protection — e-coat, black frosted textured powder coat, and internal drainage holes — is the answer to road salt and snow. Install is straightforward with the included manual and no pneumatic tools required.

The spec sheet lists 95 x 6 x 6 inches, which makes it the compact footprint of the group and the easiest to park tight. It does not fit Double Cabs with two narrow rear doors, the 2019 Silverado 1500 LD, or the 2019 Sierra 1500 Limited, so check those exclusions before ordering. A 2-year warranty is shorter than the APS three-year coverage. For the crew cab owner who uses the bed constantly, the four-step layout and eight brackets earn their place.

Bracket math: Eight brackets across two bars is the stability story here — a load spread over more mounting points stays flat instead of sagging in the middle.

Fit check first: The 500 lbs rating and 4-step setup suit a working truck, but the double-cab exclusion rules this set out for a lot of buyers.

Built for: a 2019–2026 crew cab owner who is constantly loading a roof rack or the bed and wants a step near the rear wheel.

Think twice if: you have a Double Cab, a 2019 1500 LD, or a 2019 Sierra 1500 Limited — the fitment list excludes all three.

Low-Profile Pick

3. APS Stainless Steel Black 5-inch Running Boards

104in Bar LengthMatte Black Finish

Five steps built for a Tacoma bed, including a rear platform for two.

Tacoma owners get a purpose-built set here, and the step layout is the reason to look. Two 6-inch wide drop-down main steps handle entry with a low step height, so you climb in without a big stretch. A small front and center step make it easy to clean the windshield or load gear overhead, and a spacious plastic rear platform fits two adults standing together. That rear platform is what turns a running board into a loading dock for the roof and bed.

The frame is carbon steel with four brackets per side, rated to 500 lbs, and the finish is e-coating under a rust-resistant black powder coat. The full-length design runs from the front wheel to the rear wheel and hugs the body curves, which adds side-impact protection and closes the awkward gap at the rear wheel. It fits the 2024–2026 Double Cab with four full-size doors only — the Access Cab with two half-size rear doors is not covered, and a 6.1ft bed will not give the wheel-to-wheel effect.

Install needs no air tools or power tools, and every package includes the bars, brackets, and mounting hardware. Owners praise the look and the solid feel of the steel tube construction. Note the footprint is 78 x 6 x 5.5 inches, so it is a tighter package than the full-size truck sets. For a newer Tacoma that hauls gear every weekend, the five-step layout with a two-person rear platform is the whole argument.

The rear platform story: A plastic rear platform wide enough for two adults is the detail that separates this from a basic two-step bar.

Cab check: Four full-size doors only — if you own the Access Cab, this set will not line up on your truck.

Suits: a 2024–2026 Tacoma Double Cab owner who wants bed and roof access plus a rust-resistant finish.

skip it if: you drive an Access Cab or a 6.1ft bed Tacoma — neither gives the full wheel-to-wheel effect here.

Long Bed Workhorse

4. APS Wheel to Wheel Side Steps 6in

6061 Aircraft Aluminum6in Full Coverage Pad

The 8ft bed build: 114 inches of bar and a 6-inch step the whole way down.

Long beds need long boards, and this set is the biggest in the article at 114 x 6 x 1.5 inches and 78.1 pounds. That extra length is what reaches across a 2007–2018 Double Cab or Extended Cab with the 8ft bed. The 6″ wide corrugated non-slip pad runs the entire board, so there is no gap where you step back toward the bed. The 500 lbs rating and the 6061 aircraft aluminum build carry over from the APS 6-inch family.

The quality shows in the fit: the boards line up with the factory mounting points and sit flush along the rocker panel. Owners find them relatively easy to install and describe them as super sturdy once bolted down. The matte black powder coat keeps the look consistent with the rest of the truck. Set against the 5-inch stainless set at the top, this one gives you more width and more length for the longer cab and bed.

The one recurring note is the paperwork. Installation instructions get a mixed read — some call them great, others describe them as obtuse — so budget extra time to figure out the sequence before you start. This set also lists drilling required for the rocker panel mount. Neither is a deal-breaker for a patient install, but they are worth knowing going in.

Built for the long bed: 114 inches of bar and a 6-inch pad is the coverage answer for an 8ft bed that most boards leave short.

Set aside an afternoon: Drilling is required and the directions are hit or miss, so plan the install on a day you are not rushed.

Made for: the Double Cab or Extended Cab 8ft bed owner who needs the longest bar in the APS range.

Not for you if: you want a drill-free install or have a crew cab with a shorter bed.

Best for Lifted Trucks

5. OEDRO Running Boards

550 lbs CapacityThree-Tube Design

Four steps and 550 lbs of capacity aimed at lifted Tacomas with big tires.

Lifted trucks and oversized tires change the step math, and this set answers that directly with a 4-step design and a 6-inch wide surface. The 80.0in length runs longer than the usual board so you can reach the roof and the bed without climbing in. Each side is rated to 550 lbs — the highest load figure in this group — which matters on a truck with a lift where you step up with more force.

A three-tube design adds protection along the bottom and the side, and the perforated powder-coated surface sheds water, dust, and snow instead of letting it pool under your boot. Install is bolt-on into the factory holes. The look lands well: the dual convex platform reads as a clean side step rather than a plain bar.

The honest catch is rust. Several customers note surface rust sooner than expected, and reviews split on whether the 550 lbs steel build is worth the price. Given the 1-year warranty, plan on touching up chips and keeping the surface clean through winter. It is a strong pick for the lifted Tacoma owner who wants the tallest step rating; if long-term finish is your priority, weigh that against the corrosion reports.

Step-up strength: 550 lbs per side is the top rating here, the right call for a lifted truck where you step up hard.

Rust is the watch item: With a 1-year warranty, this is a set to keep clean and touch up rather than leave to the elements.

Fits a lifted rig: a 2024–2026 Tacoma Double or Crew Cab with a lift and bigger tires that needs a tall, wide step.

Look elsewhere if: you want a long corrosion warranty or a finish you can ignore through salted winters.

Lightweight Pick

6. Off Roader Wheel-to-Wheel Eboard Running Board 6″

Brushed Aluminum Finish5 Year Warranty

The lightest bar in the group, with a polished finish that pops.

Aluminum keeps the weight down, and this one lands at 40 pounds for the pair — far and away the lightest here — so it is the set to pick if you pull the boards off for winter or swap them between trucks. It runs a 104-inch bar with a high-grip step pad over the entire length for anti-slip protection, so your boots catch on wet days. The UV-resistant non-slip pad is built to hold up in sun as well as rain. The brushed aluminum finish makes it the polished standout of the list.

Corrosion resistance is the point of the aircraft-grade aluminum, and the 5 Year Warranty is the longest coverage in this group by a wide margin. The complete DIY kit ships with a pair of boards, instructions, brackets, and hardware. Owners call the aluminum build good quality and the bolt-on install easy, and most describe the finished truck as a beast-look upgrade.

Two things to check. The fit gets mixed feedback — some trucks line up great, others do not — so confirm the 2007–2018 crew cab 6.5ft bed pattern against your truck before ordering. Accessibility also splits: some love the step height for kids getting in and out, others want it lower. For the buyer who values low weight and the longest warranty, this set is the practical choice.

Light and long-warranted

  • 40 pounds for the pair makes it the easiest bar to handle and remove
  • 5 Year Warranty is the longest coverage in this article
  • UV-resistant pad and brushed aluminum resist fading and rust

Confirm before ordering

  • Fit is mixed across trucks, so match your exact year and bed
  • Step height splits opinion, which matters if kids climb in often

Ideal for: the 2007–2018 crew cab 6.5ft bed owner who wants a light aluminum bar and the longest warranty.

Double-check the fit: mixed fit feedback means you should verify your exact year and bed before you order.

Know the Specs

Bar length and wheel-to-wheel coverage

Bar length is measured in inches and tells you how far the board reaches along the truck. A 96-inch bar suits a short bed, while a 104-inch or 114-inch bar reaches the full span on longer cab and bed combinations. Buying the wrong length leaves a gap at the rear wheel, which defeats the purpose of a wheel-to-wheel board. Match the listed length to your exact cab and bed before anything else.

Load capacity in pounds

Load capacity is the weight the board is rated to support, and it is usually measured per side. Values in this category run around 500 lbs, with some sets rated to 550 lbs. A higher rating means the bar stays flat under a heavy step instead of flexing. Stepping up from a lifted truck puts more force on the board, so the rating matters more there.

Material: stainless, aluminum, or carbon steel

304 stainless steel resists corrosion best and carries the longest warranties. Aircraft aluminum cuts weight for easier handling and removal. Carbon steel with a powder coat is strong and common, but salt and chips expose it to rust faster. Whichever you pick, keeping the finish clean through winter extends its life.

Mounting: bolt-on versus drilling

A rocker panel mount attaches the board to the truck’s rocker panel, the structural rail under the doors. Some sets drop into factory holes with no drilling, while others list drilling required. A bolt-on install is faster and reversible; a drilled install is permanent, so treat fresh holes with rust protection right away.

Common Questions

Will a wheel-to-wheel running board fit my truck if the listing names a different model year?
Only if the cab and bed configuration match. Boards are cut to specific combinations, so check the fitment line against the sticker on your driver’s door jamb. The same model can carry different boards across a short bed, a standard bed, and an 8ft bed.
What is the real difference between cab-length and wheel-to-wheel boards?
Cab-length boards stop at the rear door, leaving the space over the rear wheel open. Wheel-to-wheel boards run from the front wheel well to the rear wheel well, so you get stepping points near the bed and roof access. That longer span is the whole reason to choose them.
Do I need to drill holes to install running boards?
It depends on the set. Some boards bolt into factory pre-drilled holes with no drilling, while others list drilling required for the rocker panel mount. A no-drill install is faster and reversible. If you drill, treat the fresh metal with rust protection right away.
Can two people stand on a wheel-to-wheel step at the same time?
On sets with a rear platform rated high enough, yes. Look for a 500 lbs or 550 lbs capacity and a platform near the rear wheel. Those boards support stepping up with cargo in hand, which is the point of a bed access step.
What does the 500 lbs load rating actually mean for daily use?
It is the weight the board is rated to support, usually per side, so it covers a heavy adult plus the extra force of stepping up. A higher rating means less flex over time. On a lifted truck where you step up with more momentum, that margin earns its keep.
Will stainless steel or carbon steel hold up better to road salt?
Stainless steel resists corrosion better, which is why it often carries longer warranties. Carbon steel with a powder coat is strong and common, but salt finds chips quickly. Either way, a clean finish and a yearly protectant on the brackets go a long way.
Why do some boards ship in two pieces that need assembly?
A wheel-to-wheel butt joint design connects two sections into one long bar before you mount it. That design keeps shipping manageable on long boards. Assemble on a flat surface with a helper so the joint lines up cleanly before it goes on the truck.
How long should installation take on a wheel-to-wheel set?
Faster than most buyers expect on a bolt-on set — owners commonly finish in about 30 minutes to just over an hour. Drilled installs and two-piece bars take longer. Set aside a full afternoon if you are drilling or working alone.
Do running boards affect ground clearance or off-road use?
A low-profile board tucks close to the rocker panel, so it stays out of the way on mild trails. A deeper drop step hangs lower and is better for cab entry. If you go off-road often, pick a low-profile bar and one with added side protection.
Can I move a set of boards from one truck to another?
Only if the cab and bed match, because the mounting points and bar length are cut for a specific truck. Moving a set between a short bed and a long bed will not line up. Check the fitment line on the new truck before you count on reusing them.

The Bottom Line

For most truck owners, the wheel to wheel running boards winner is the APS Wheel to Wheel 5in because the 304 stainless build, the full-length 5-inch step pad, and the 96-inch span cover a 5.5ft bed crew cab without a gap — and it does it with the cleanest install of the group. If you load a roof rack or bed constantly, grab the Binary Star for Silverado/Sierra 1500 for its four-step layout and eight brackets. And for a newer Tacoma that hauls gear, the Binary Star Tacoma set is the one to reach for.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top