Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
The short answer: buy a chock rated for your bike’s weight, sized to your actual tire width, and bolted down properly — everything else is detail. This guide covers nine chocks that each solve that problem a different way, from a folding garage stand to a full trailer-mounted cradle.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You will see how tire width, cradle height and mounting style decide whether a chock grips or lets the front wheel wander. The right pick for your garage is often not the right pick for a 6-foot trailer bed, and this list separates the two: best wheel chocks for motorcycles.
Top Picks



How To Choose The Best Wheel Chocks for Motorcycles
A wheel chock is a metal cradle that grabs your front tire and holds the bike upright without you. Get the tire width and the bolt-down right and loading becomes a one-person job. Get either wrong and the front wheel walks sideways the moment you hit a bump.
Match the chock to your tire width first
Your tire width decides which chock fits, so check the tire width range on every chock in this guide before you buy. A narrow sportbike front tire can swim inside a cradle built for a fat cruiser tire. A wide touring tire simply will not drop into a cradle built for a 5-inch tire.
Measure your front tire’s widest point with the bike loaded, not on a stand. Then compare that number to the chock’s stated width fit before you order.
Decide between a fixed cradle and a removable stand
A fixed cradle bolts to a trailer bed or garage floor and stays there. That is the right call if the bike lives in one spot. A removable or folding stand comes apart for storage, which suits a shared garage or a truck bed that hauls other cargo between trips.
Read the load rating honestly
The load rating tells you how much bike the steel is built to hold. The chock still has to be bolted through solid material at the four-hole mounting pattern. Bolted to thin plywood, even a heavy-duty chock will move.
Side-by-Side Comparison
| Model | Best For | Weight | Mounting | Claimed Capacity | Amazon |
|---|---|---|---|---|---|
| CONDOR Pit-Stop / Trailer Adaptor Kit★ Best Overall | Track days and daily garage use | 32 lbs | Pit-Stop plus trailer adaptor kit | — | Amazon |
| Extreme Max 5600.3204 DeluxeMost Versatile | Trailer travel plus tie-downs included | 25 lbs | Bolt-down chock with strap kit | 2000 lb tie-down rating | Amazon |
| ECOTRIC RACK-A44Best for Folding Storage | Folding storage between trips | 12.45 kg | Trailer mount | — | Amazon |
| HOXWELL Portable Chrome-Plated Stand | Portable garage and truck-bed use | 4.42 lbs | Removable, bolts to floor or bed | — | Amazon |
| Extreme Max 5001.5759 3-Piece | Budget trailer mounting | 3.8 lbs | Four-hole bolt pattern | — | Amazon |
| BIG RED ATR1106R | Adjustable fit across tire sizes | 14.8 lbs | Removable, for workshops and trailers | 1800 lbs | Amazon |
| JY PERFORMANCE Plate-Stand | Trailer hauling of 15″–21″ wheels | 20.4 lbs | Trailer or truck bed, upright design | 1800 lbs | Amazon |
| Camco 66100 Universal | Truck-bed hauling with handlebar straps | 12.5 lbs | Mounts to truck bed or trailer floor | — | Amazon |
| Lock ‘N Load BK100 | Heavy touring bikes, one-person loading | 27 lbs | Quick-disconnect mounting plate | — | Amazon |
Detailed Reviews
1. CONDOR PSTK-6400 Pit-Stop
Our pick — 4.5+★ from 250+ verified ratings; the strongest balance of quality and price.
One chock that works as a trailer holder and a garage stand without swapping hardware.
Here is the buying case in one line: this is the only pick in the guide that moves from truck bed to garage floor and keeps working. The Pit-Stop holds your bike upright in the garage for fluid checks and washing — and the bundled trailer adaptor kit locks that same chock into your trailer for track days. It is sold as the Pit-Stop/Trailer-Stop package, and the maker calls it their most versatile wheel chock.
Build weight tells you where it sits in this lineup. At 32 pounds it is far heavier than the 3.8-pound Extreme Max 5001.5759, and much closer to the 27-pound Lock ‘N Load. That mass is the point: the heavier steel base keeps a loaded sportbike from creeping when you lean on the bars to check tire pressure. It measures 30 by 29 by 16 inches, which is a footprint you want to plan a garage corner or trailer position around before it arrives.
What wins people over is the build quality, and it holds up in conversations about trailering. Reviewers repeatedly say it lets one rider load a bike solo, and several call it a life-changer for trailering motorcycles. There is a weight limit worth flagging: one rider reports it supports up to 900 lbs, so check your loaded bike weight against that if you ride a fully dressed tourer.
Trailer-mounted pit-stop
- Doubles as an everyday garage stand and a bolted-in trailer chock from one package.
- 32 pounds of steel that stays put while you work on the bike.
- Reported support up to 900 lbs covers most sportbikes and many tourers.
Part number check
- The 30 x 29 x 16-inch body eats real floor or trailer space.
- At 32 pounds it is a two-hands lift if you move it between vehicles.
Trailer haulers: you want one chock that holds your bike in the shop and in the trailer, and you have a permanent spot to mount it.
Bare garage floors: you need something you can unbolt and stash in a cabinet — the folding ECOTRIC or the 4.42-pound HOXWELL suit that better.
2. Extreme Max 5600.3204 Wheel Chock
Arrives as a complete tie-down system, not just a cradle you have to finish shopping for.
Most chocks leave you buying straps separately. This kit bundles the chock with a pair of 1.5-inch by 6-foot tie-downs rated at 2000 lbs, so the bike is secured four ways the day the box lands. The cradle itself takes 17-inch to 21-inch wheels between 3-5/32-inch and 7-3/32-inch wide — a range wide enough for a sportbike front tire and a fat cruiser tire alike.
The tie-downs are not an afterthought. They use heavy-duty nylon with dual safety clips, sewn-on soft ties, plastic-coated metal hooks and heavy-duty ratchets. Soft ties matter because they wrap the handlebar or fork leg without chafing the finish. Soft ties included in the box save you a separate strap-and-soft-tie shopping trip.
It earns its keep on the road: the long-haul reports here are the strongest in this guide, with bikes logging cross-country mileage and staying put. Owners point to solid construction and stable footing as the reason. The honest catch is wheel size: the spec sheet’s 17-to-21-inch window leaves small-wheel and dirt-bike front tires out, so check yours before you commit.
Deluxe tie-down grip: the 2000 lb tie-down rating and 25-pound steel body give the bike two independent reasons to stay vertical on a rough road.
Size chart needed: 17″–21″ wheels only — measure the front tire’s diameter and width first, because a 16-inch front or an oversize knobby falls outside the spec.
Long-haul riders: the rider who wants to bolt one thing down and drive away with the bike fully lashed, no second shopping trip.
Oversized tires: that same 17″–21″ fit window rules out smaller front wheels, so a mini or dirt bike needs a different cradle.
3. ECOTRIC Motorcycle Wheel Chock
Folds down flat between trips, then opens into a full trailer cradle when the bike comes out.
The spec that decides this one is the fold. Upright it stands 9 inches wide, 25 inches long and 15 inches high. Folded, the height drops from 15 inches to 7 inches — so it tucks under a shelf or into a corner of the truck bed without unbolting anything. If you share a garage with a car or use one trailer for more than motorcycle duty, that is a real everyday win.
The cradle itself is the most size-tolerant in this article. Adjustable holes let it work on front and rear tires from 14 inches to 22 inches and 80mm to 230mm wide, which spans dirt bikes, sportbikes, cruisers and heavy tourers. The welded steel pipe frame is finished in black paint for wear resistance and rust protection, and the maker designed it specifically for trailer use — one person and two tie-down straps will load or unload a bike.
Sturdiness is the thing everyone comes back to, and functionality sits right behind it. Bikes stay upright through loading, and the value reads well past what you pay. Weight is the one figure to get right before ordering: the listing shows 12.45 kg, so treat it as a two-handed install rather than a carry-around accessory.
Budget trailers: when floor and bed space are shared, since 7 inches folded is close to nothing.
Loose floor use: if you want to move the chock by hand often — at 12.45 kg, plan on a fixed mount rather than shuffling it around.
4. Lock ‘N Load BK100 Wheel Chock
A built-in front tire tie-down system so the bike locks itself in as you roll forward.
Solid steel, 27 pounds, and a one-size-fits-all cradle — that combination is what makes the BK100 the pick for a heavy tourer. The built-in front tire tie-down system grabs the wheel as the bike rolls in, so you are not fighting a strap while balancing 464-pound Harley touring bikes. Owners cite that exact bike, and the chock keeps it firmly in place.
The quick-disconnect mounting plate is the feature that separates this from a permanently bolted cradle. The plate stays fixed to the trailer or garage floor and the chock lifts off it, so the same anchor point does double duty. If you rotate between a trailer and a shop stand, that saves a whole second mount.
Functionality and durability are what hold up best over time, and the steel construction backs the second one. The honest friction point is installation: the bolt compatibility does not suit every truck bed or trailer deck from the start, so budget an extra trip for the right fasteners. Get past that and the loading experience is the easiest here.
Orange bolt-on hold: roll the bike forward, let the built-in front tire tie-down take hold, and one person can secure a 464-pound touring bike without help.
Hardware sold apart: the quick-disconnect plate is excellent once mounted, but the included bolt setup may not match your deck — buy fasteners to suit your surface.
BK100 buyers: for a heavy touring bike and a rider who loads alone every time.
No-drill setups: if you want bolt-and-go — the installation fit is the one place this chock asks more of you.
5. JY PERFORMANCE Motorcycle Wheel Chock
Eight-gauge steel rated for 1800 pounds, with a rotating wheel lock that grips the front tire.
Start with the steel: 8-gauge is a thick, heavy sheet, and it is the reason this chock is rated to hold motorcycles up to 1800 lbs. The upright design adds vertical support so the bike cannot tip or shift while parked or underway. For a trailer, a pickup bed or a garage corner, that is the core job done right.
Fit comes through adjustable height settings and a wheel window from 15 inches to 21 inches in diameter, with a maximum tire width of 3 inches to 5 inches. That covers most street and adventure bikes. The rotating wheel lock is the part that draws praise — it cinches the front tire confidently rather than letting it rock, and a 19-inch adventure bike sits well in it.
Harley Davidsons on trailers are the use case this chock gets talked about for most, and the sturdy build is the reason. Loading is a one-person job: put the bike in, take it off, no wrestling. What to watch is tire width — 5 inches is the ceiling, so a wide cruiser front tire may not drop in cleanly.
Heavy bike owners: you haul a street or adventure bike and want heavy steel and a 1800 lb rating without going to the top of the range.
Quick swaps: the 3-to-5-inch tire width limit — measure a fat cruiser front before ordering.
6. Camco Steel Universal Tire Fit Motorcycle Wheel Chock Mount
Built for the truck bed, with two handlebar straps and mounting hardware in the box.
This chock is aimed squarely at the pickup owner. It mounts to a truck bed or trailer floor with the included hardware, and comes with two nylon handlebar straps for extra stability during transit. Since the straps hook the bars rather than only the wheel, the bike gets held at both ends — useful on a bouncy bed.
The universal tire fit is what lets it cover various motorcycles, and the powder-coated steel is built for the weather a bed sees. At 12.5 pounds it is a middle-weight in this lineup — lighter than the 25-pound Extreme Max 5600.3204 and heavier than the 4.42-pound HOXWELL. At 12.5 pounds, one person can still bolt it down without a helper.
What the reviews come back to is how well it holds the bike, and the sturdiness gets mentioned as strong enough to hold a 900 lbs motorcycle. Straps and hardware being in the box is a quiet advantage over chocks that arrive bare. The open question is the universal fit — it covers many sizes, but if your bike has an unusually wide or narrow front tire, confirm the fit before you drill.
Bed-first mounting: hardware and two handlebar straps included means a complete tie-down setup for a pickup, not just a cradle.
Fit varies: universal means broad, not exact — verify your tire against the mount before you commit to bolt holes.
Truck bed users: for a truck bed that needs the bike held at the wheel and the bars, with straps already supplied.
Narrow trailers: if your front tire is at the edge of common sizes, since universal fit is a range rather than a guarantee.
7. BIG RED Motorcycle Wheel Chock
Twelve height holes on both sides of the cradle, so you set the grip to your own tire.
You get a height-adjustable cradle here, so one stand can fit more than one bike. There are 12 holes on each side of the wheel cradle holder, and you move the cradle up or down to suit your tire size. That is more fine-grained than the fixed-height chocks in this guide, so the same stand can hold a low sportbike front and a taller adventure bike front without a second purchase.
Heavy-duty steel carries a 1800 lbs capacity, with a powder-coated surface that resists corrosion and impact. That finish matters for a stand that lives outdoors or in a damp garage. The parts are removable for loading and transport, so it goes from garage storage to trailer duty, and it installs in workshops, garages and carriages.
Sturdiness is the clear strong point, with functionality right behind it. The fit reports back that up — a Yamaha XT250 with a 3-inch tire went in fine. The trade-off worth knowing is the mounting depth: the listing’s package dimensions run 16.45 by 12.2 by 5.98 inches, so measure your trailer deck or bench area before bolting down.
Big Red fans: when your front tire size sits between the fixed-fit chocks and you want to dial the cradle height to match.
Light scooters: the 12-hole adjustment needs a flat mount surface — a curved or uneven deck limits how well the cradle sits.
8. HOXWELL Portable Motorcycle Stand
Chrome-plated steel in a 4.42-pound package that unbolts and disappears when you are done.
Weight is the headline. At 4.42 pounds this is the lightest bolted chock here, against 32 pounds for the CONDOR and 27 for the Lock ‘N Load. The chrome-plated steel gives it a flat, brighter surface that resists rust and resists deformation. The curved groove shape is shaped to hug the tire’s profile so the wheel cannot slide off once seated.
The removable mounting design is what makes it portable. It comes apart and stores away when not in use, then bolts back to a floor, truck bed or trailer bed. That makes it a fit for a shared garage, a repair shop, or a rental trailer. It is built for 5.5-inch wide motorcycle tires and measures 12.2 by 7.87 by 7.87 inches.
The one thing to be honest about is tire ceiling: 5.5 inches wide is a firm limit, and a fat cruiser front may not drop in. For the sportbike or standard-bike rider who wants a light, rust-resistant stand they can move, it covers the job cleanly.
Garage storage: if you need a chock you can carry out to a trailer, bolt down, and take back inside the same day.
Rough pavement: if your front tire runs wider than 5.5 inches, which rules this one out.
9. Extreme Max 5001.5759 Wheel Chock
The lightest way into a bolted trailer chock, at 3.8 pounds and a 6.5-inch tire fit.
At 3.8 pounds, this is the lightest chock in this guide by a wide margin, so you can carry it under one arm. Three pieces bolt together into a cradle. Compare that to the 32-pound CONDOR: this one is a shrink-wrapped parcel you can carry, then bolt to a trailer, truck bed or garage floor with the four-hole mounting pattern. The 6.5-inch item diameter sets the widest tire it takes at 6.5 inches, which reaches beyond the 5.5-inch HOXWELL.
Where it reads well is the price-to-build ratio. Quality and value are the two things most talked about, and the powder-coated steel holds up for the money. Assembly is straightforward bolt-together work, so setup takes minutes rather than an afternoon.
The catch is fit consistency. Some bikes sit perfectly in the cradle, others find it too wide, and a few report the assembled unit wobbling unless the mount is fully tightened. The included hardware is the weakest link — plan on picking up better bolts for a trailer install. Treat this as a solid budget cradle that rewards a careful mount, not a bolt-and-forget unit.
Three-piece budget set
- 3.8 pounds makes it easy to move and mount alone.
- 6.5-inch tire fit covers a wider front than several rivals in this list.
- Powder-coated steel and simple bolt-together assembly at a low entry point.
Care with bolts
- Fit runs wide for some bikes — check your tire width before ordering.
- Reported wobble when the mount is loose; the supplied hardware benefits from an upgrade.
Value seekers: for a first trailer chock where budget and low weight lead the decision.
Heavy-duty needs: on the included hardware and the need for a fully tight mount, or the cradle can shift.
Know the Specs
Tire width and diameter fit
This is the number that decides whether a chock works at all. A listing like 5.5-inch or 6.5-inch wide describes the widest front tire the cradle accepts. Diameter fit works the same way — a 15″-21″ or 14″-22″ range sets the wheel heights the cradle will seat. Measure your front tire at its widest point and across the rim, then compare both to the spec.
Load rating and capacity
The load rating, given in pounds, is how much bike weight the steel is built to hold. A 1800 lbs capacity chock covers most street and touring bikes; a 2000 lb tie-down rating describes the straps, not the cradle. Mount the chock through solid material at all four holes, because the rating only means something once the base cannot move.
Weight and portability
Chock weight runs from a 3.8-pound three-piece unit to a 32-pound pit stand. Lighter chocks come apart or unbolt for storage; heavier ones stay put. Decide whether the chock lives in one spot or travels before you weigh portability against holding force.
Mounting and folding design
Fixed cradles bolt down permanently, which is the strongest option for a trailer. Quick-disconnect plates and folding chocks let one anchor point serve garage and trailer duty. Folding designs drop their upright height — one here goes from 15 inches to 7 inches folded — so they store under a shelf.
Common Questions
Will a wheel chock fit my 6-inch wide cruiser front tire?
Do I have to bolt a motorcycle wheel chock to the floor?
What does 1800 lbs capacity actually mean on a wheel chock?
Can one person load a motorcycle into a chock alone?
Will a folding wheel chock hold a heavy touring bike?
Is a chrome-plated chock better than a powder-coated one?
What tire diameter range should I look for on a dirt bike?
Do wheel chock kits include tie-down straps?
Can I use the same wheel chock in my garage and in my trailer?
The Bottom Line
For most riders, the wheel chocks for motorcycles winner is the CONDOR Pit-Stop because it works as a daily garage stand and a bolted trailer chock from one package, with 32 pounds of steel behind it. If you want the easiest one-person loading for a heavy tourer, the Lock ‘N Load BK100 adds a built-in front tire tie-down. And if you need your investment to hold to the long haul, the Extreme Max 5600.3204 bundles those tie-downs with a broad 17″-21″ fit.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





