9 Best Water Tank for Trailer | Fit It Before You Fill It

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

Buying a water tank for a trailer is mostly a measuring job, not a shopping job. The tank that works is the one that physically fits your bay — and that you never, ever seal to a garden hose. Every pick below is a fresh or gray water holding tank made for trailers, campers, and food carts, listed with its real footprint and fitting layout so you can check it against your own frame before you commit.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

What follows walks you through footprint math, NPT fitting sizes, and venting requirements in plain English — plus the exact capacity and dimensions of each tank so you can rule one in or out in seconds. Here is the honest shortlist of the water tank for trailer options worth measuring your bay for.

Top Picks

Class A Customs T-3000 — 30 Gallon Fresh and Gray Water Tank
Best OverallClass A Customs T-3000 — 30 Gallon Fresh and Gray Water Tank4.5+★350+ ratingsThe tank that fits a first build without a fight: 30 gallons, 34.5 inches long, 18 pounds empty. If you are plumbing a concession trailer or a camper for the first time, this is the sensible center of the whole category.Check price on Amazon
Class A Customs T-2500 — 25 Gallon Fresh and Gray Water Tank
Slimmest ProfileClass A Customs T-2500 — 25 Gallon Fresh and Gray Water Tank4.5+★100+ ratingsWhen headroom is the enemy, this one goes flat: a 10-inch face and 25 gallons. The entire argument for this tank is one number — 10 inches.Check price on Amazon
Class A Customs T-3300 — 33 Gallon Fresh and Gray Water Tank
Best Dual DutyClass A Customs T-3300 — 33 Gallon Fresh and Gray Water Tank4.5+★100+ ratingsThree gallons more than the 30, in a shell only an inch and a half longer. This is the quiet upgrade pick for a trailer that has just a little more room than the T-3000 needs.Check price on Amazon

How To Choose The Best Water Tank for Trailer

Two tanks can hold the same gallons and still not swap into the same trailer. The number on the box tells you capacity; the three measurements and the fitting layout tell you whether it actually goes in. Start with the space, then work backward to gallons — not the other way around.

Measure the bay, then rotate the tank

A trailer tank is a box, and most of these models let you sit them on any side and rotate them to change which face becomes the height and which becomes the width. That flexibility is the whole game in a low bay: you can trade height for width without losing capacity. Measure the longest clear length first, then whatever headroom you have, then the width between your frame rails. Leave a little slack, because these tanks are rotational molded and the maker lists a tolerance of roughly a quarter inch on each measurement.

Know whether you are plumbing fresh or gray

Most of these tanks are dual-purpose: the same shell can store drinking water or hold gray water from a sink. What changes is how you treat it. Fresh water demands a tank made from NSF-approved or BPA-free material and a sanitary, washable interior. Gray water just needs to go somewhere legal and vented. If you might switch from gray to fresh duty later, buy an NSF- or BPA-free-rated tank now so the option stays open.

Match your fittings before the first fill

Fitting sizes decide how much plumbing work you are signing up for. The common layout here is two 1.5-inch female NPT ports and two 0.5-inch female NPT ports — NPT meaning a standard tapered thread that seals when you tighten it. Some ports arrive with a thin membrane you cut out with a razor knife to open them. Never force metal fittings into plastic threads; use plastic connecting fittings and snug them, because over-tightening is what cracks a port.

Understand the venting rule before anything else

None of these tanks are pressurized. A trailer water tank must be vented so air can move in and out as the water level changes. If you clamp a garden hose straight to a port and turn the tap on, you have created a sealed pressure vessel in a plastic box, and the maker’s own warning is that the tank can burst. Fill by gravity through a fill dish or an open inlet, and let the vent do its job.

Side-by-Side Comparison

Model Best For Capacity Longest Length Weight Amazon
Class A Customs T-3000 (30 Gal)★ Best Overall First-time trailer builds 30 gallons 34.5 inches 18 pounds Amazon
Class A Customs T-2500 (25 Gal)Slimmest Profile Shallow, slim bays 25 gallons 33.5 inches 38 pounds Amazon
Class A Customs T-3300 (33 Gal)Best Dual Duty Splitting fresh and gray 33 gallons 36 inches 18 pounds Amazon
Class A Customs T-4000 (40 Gal) Long off-grid trips 40 gallons 39.5 inches 49 pounds Amazon
Automotive Authority 30 Gal Replacement / OEM swaps 30 gallons 34 inches — Amazon
Ameri-Kart WT-5077 (29 Gal) Camper pass-through bays 29 gallons 32 inches 17.14 pounds Amazon
Barker 11917 (26 Gal Kit) Compact food-grade setups 26 gallons 21.5 inches — Amazon
Ameri-Kart WT-5549 (36 Gal) Bigger families, longer trips 36 gallons 37 inches 18.81 pounds Amazon
Class A Customs T-5500 (55 Gal) Serious off-grid capacity 55 gallons 37.5 inches — Amazon

Detailed Reviews

★ Best Overall

1. Class A Customs T-3000 — 30 Gallon Fresh and Gray Water Tank

Our pick — 4.5+★ from 350+ verified ratings; the strongest balance of quality and price.

NSF-approved materialFour built-in NPT fittings

The tank that fits a first build without a fight: 30 gallons, 34.5 inches long, 18 pounds empty.

If you are plumbing a concession trailer or a camper for the first time, this is the sensible center of the whole category. You get 30 gallons of storage in a box that measures 34.5 inches at its longest point, 12 inches on one face and 17.5 inches on the other — and you can sit it on any side, so a shallow bay takes the 12-inch face while a deeper cabinet takes the 17.5. At 18 pounds empty, one person can lift it into place and rotate it while checking clearances.

Where it earns its keep is the plumbing flexibility. The shell carries two 1.5-inch female NPT ports and two 0.5-inch female NPT ports — NPT being a standard tapered thread that seals as you tighten, so off-the-shelf plastic fittings thread straight in. Some of those ports ship with a thin membrane you score out with a razor knife to open. The shell is made from NSF-approved material and rated safe for drinking water, which means the same tank can run fresh water now and gray water later without you buying twice.

What wins people over in the review pages is plain build quality, and the recurring note is how easy the thing goes in; the trade-off sits in construction consistency and fit, which draw more mixed feedback than anything else here. And like every tank on this list, it is non-pressurized: vent it and fill it by gravity, never clamp a hose to a port.

Why it takes the top slot

  • 30 gallons in a 34.5-inch shell, and it rotates to swap height for width
  • Four built-in NPT ports in two sizes — no drilling to get plumbing started
  • 18 pounds empty, so it is a one-person install
  • NSF-approved material keeps fresh and gray water duty on the table

What to keep in mind

  • Non-pressurized only — a sealed hose connection can burst it
  • Tolerances run about a quarter inch, so leave slack in the bay
  • Ports with membranes need to be cut open before use

Go with this if: you want one tank that handles fresh or gray duty and slides into a bay in the mid-30-inch range.

Think again if: your bay is shorter than roughly 34.5 inches plus clearance for the fittings.

Slimmest Profile

2. Class A Customs T-2500 — 25 Gallon Fresh and Gray Water Tank

10-inch faceNSF-61 listed

When headroom is the enemy, this one goes flat: a 10-inch face and 25 gallons.

The entire argument for this tank is one number — 10 inches. That is the thinnest face on the shell, and if your trailer has a shallow void under a bench or behind a wheel well, it is the measurement that decides whether you get water storage at all. The tank holds 25 gallons, runs 33.5 inches at its longest point, and measures 33.5 by 17 by 10 inches as listed. Rotate it and the 10-inch side becomes your height, which is how you fit under cabinetry that swallows deeper tanks.

It carries the same plumbing layout as the larger Class A Customs shells: two 1.5-inch female NPT ports and two 0.5-inch female NPT ports, made from polyethylene and resin and listed against the National Sanitation Foundation 61 standard for drinking water contact. The 25-gallon figure is where it separates from the 30-gallon T-3000 above — you trade 5 gallons of capacity for that slim face, and the footprint advantage is real rather than cosmetic.

One tally that surprises people is the scale number: the listing puts item weight at 38 pounds. That is heavier than the bigger 30-gallon shell, so if you are mounting this alone, plan a second pair of hands or a dry-fit before you fill it. Empty weight is what you wrestle with, not filled weight — 25 gallons of water on top of that is a load your trailer frame needs to be rated for.

The slim-face payoff: 10 inches of profile buys you storage in bays where a 12- or 13-inch shell simply will not sit, and the NSF-61 listing keeps it legal for potable water duty.

The honest catch: at 38 pounds listed, it is not the featherweight you might expect from a smaller tank — dry-fit it before you commit to a solo install.

Reach for this if: your measurement is width or height in the low-teens and deeper tanks are ruled out.

Look elsewhere if: you need maximum gallons per inch and have room for a taller shell.

Best Dual Duty

3. Class A Customs T-3300 — 33 Gallon Fresh and Gray Water Tank

33 gallonsRotates on any side

Three gallons more than the 30, in a shell only an inch and a half longer.

This is the quiet upgrade pick for a trailer that has just a little more room than the T-3000 needs. Capacity is 33 gallons, and the longest measurement is 36 inches, with faces at 12 inches and 17.75 inches. Compare that with the 34.5-inch, 30-gallon T-3000 and you can see the trade: an extra inch and a half of length and a quarter inch of width buys you three more gallons of water. In a bay with a hard 36-inch limit, it is the last tank that fits before you start cutting frame.

Same four-port layout as the rest of the Class A Customs family — two 1.5-inch female NPT and two 0.5-inch female NPT — so if you have already plumbed one of their tanks, your fittings and your routine carry over. The material is polyethylene and resin and meets the National Sanitation Foundation 61 standard for drinking water contact, which is what makes it viable as either the fresh tank or the gray tank on the same trailer. Empty weight is listed at 18 pounds, the same as the 30-gallon shell.

Two things to plan around. The shell is non-pressurized, so it needs a vent and a gravity fill, and the maker’s warning about a sealed hose connection is worth reading twice. And the manufacturer part number and model number fields on the listing do not match the T-3300 label, so confirm the 33-gallon size on the box when it arrives rather than assuming the listing metadata got it right.

Where it sits in the line: 33 gallons at 36 inches long and 18 pounds empty is a genuine step up from the T-3000 without much footprint cost — the extra capacity comes cheap in length terms.

Verify on arrival: the listing’s model and part number fields are inconsistent with the 33-gallon name, so check the tank’s label and dimensions yourself before you cut a hole for fittings.

This one fits: trailer builds with a 36-inch bay that want headroom above 30 gallons.

Second-guess it: if you cannot spare the extra inch and a half of length — the T-3000 wins that trade.

Most Capacity for Length

4. Class A Customs T-4000 — 40 Gallon Fresh and Gray Water Tank

40 gallons39.5 inches long

Forty gallons and 49 pounds, built for the long off-grid run with no refill stop.

Here is the capacity math that matters. The T-4000 holds 40 gallons against the 30-gallon T-3000, and it runs 39.5 inches at its longest point versus that tank’s 34.5 inches — five extra inches of frame space for ten extra gallons. The faces measure 13 inches and 18 inches, so it is a little wider than the 30-gallon shell’s 17.5. If your bay is around 40 inches, this is the tank that boost what you carry without stepping up to a completely different class of shell.

Empty weight is the figure to respect: 49 pounds. That is plenty to wrestle into a cabinet by yourself, and the maker’s warranty explicitly covers defects on the tank and its factory-installed fittings only if the tank stays on fresh or gray water duty — using it for sewage or fuel voids coverage. The four ports follow the family pattern, two at 1.5-inch female NPT and two at 0.5-inch female NPT, with the larger pair sometimes shipping membrane-sealed for you to cut open.

Quality is the note that carries the most weight across owner feedback, with value close behind; leakage draws a split response, which is normal for a rotational-molded shell that lives and dies by how carefully the ports are threaded. Snug plastic fittings, do not over-torque, and vent the tank before you fill it. That last point is not optional — a pressurized connection to a non-pressurized tank is exactly how these things fail.

The case for the 40

  • 40 gallons inside a 39.5-inch length
  • NSF-approved material, fresh or gray duty
  • Warranty covers the tank and its installed fittings on water duty
  • Four NPT ports in two sizes for flexible plumbing

What you accept

  • 49 pounds empty makes it a two-person lift for most people
  • Leak results are mixed — thread the ports gently and do not over-tighten
  • Sewage or fuel use voids the manufacturer warranty outright

The right buy for: off-grid trailer trips where 30 gallons runs dry before the next fill.

Pass on it if: your bay is under about 40 inches or you are installing alone.

smooth Shell

5. Automotive Authority 30 Gallon Water Tank

One-piece constructionBPA free

No seams to fail — a one-piece 30-gallon shell molded for replacement and OEM work.

Replacement jobs are where this tank makes sense. It measures 34 inches by 12 inches by 18 inches, holds 30 gallons, and comes out of a single rotational-molded piece of polyethylene — the maker’s point being that a smooth shell gives nothing to split along a joint. On a horse trailer or a marine install where the original tank cracked at a weld line, that construction is the reason to buy it.

The plumbing is different from the Class A Customs shells and worth checking before you order. Instead of four ports, this one comes with a single 1.25-inch water fill inlet plus three 3/8-inch NPT connections — smaller ports, and a dedicated fill opening. If your trailer already uses 3/8-inch line, that is a clean match. If you are plumbing from scratch around 1.5-inch hardware, expect to adapt. The material is BPA-free polyethylene and the surface is sold as stain, corrosion, and rust resistant for replacement or OEM installation on RVs, horse trailers, and marine products.

It is non-pressurized and must be vented, same as every other tank here. The 12-inch face is the one that slides under low cabinetry, and at a listed 6.19 kg it is manageable for a single installer. Where this one asks for care is the fill side: that 1.25-inch inlet is your gravity fill, so a fill dish or an open hose end above it — never a sealed clamp — is how you get water in without stressing the shell.

The seam argument: a single molded piece of BPA-free polyethylene with a dedicated 1.25-inch fill inlet and three 3/8-inch NPT ports is a tidy OEM-style replacement for a cracked original.

Check your line size: those 3/8-inch connections are smaller than the 1.5-inch ports on most tanks here, so confirm your plumbing matches before you pull the old tank out.

Best match for: RV, horse trailer, and marine replacement jobs that already run 3/8-inch line.

Not your tank if: you are building fresh plumbing around 1.5-inch fittings and want big ports from the start.

Premium Pick

6. Ameri-Kart WT-5077 Water Tank

IAPMO listedQAI certified

A cube-shaped 29-gallon shell built around fitting access, not just footprint.

The Ameri-Kart name comes with a different set of guarantees than the Class A Customs tanks, and that is the reason to pay attention here. This one is made in the USA from BPA-free material, listed against IAPMO standards, and certified by QAI Laboratories — three separate markers on a tank intended for drinking, cooking, showering, and washing dishes in RVs, motorhomes, trailers, campers, food trucks, and tiny houses. If potable-water paperwork matters to you, this carries more of it than most.

Physically it is a cube: 32 inches by 16 inches by 14 inches, 29 gallons, listed at 17.14 pounds. That near-cube shape is what makes the fitting locations work — the maker’s pitch is that ports sit where you can reach them from more than one orientation, so installation in a tight pass-through compartment stays practical. The built-in fittings are two 1.5-inch balloon-style threaded female NPT ports and two 0.5-inch threaded female NPT ports, the same generous layout as the bigger tanks here in a shorter overall length.

Fit is what wins people over in the reviews, and the recurring theme is how easily the shell lands in a camper’s pass-through bay. The material is weather resistant and impact resistant, and the maker calls the shell sanitary and leak-proof — though some owners do report leaks, so treat the connections as a careful job rather than a plug-and-play one. Two rules from the manufacturer worth taping to the tank: do not pressurize it, and do not hang it by straps or put weight on top of it.

What the cube buys you

  • 29 gallons in a 32-inch cube that lands in pass-through compartments
  • IAPMO listed, QAI certified, BPA-free, made in the USA
  • Two 1.5-inch and two 0.5-inch NPT ports for flexible plumbing
  • 17.14 pounds empty for an easy solo install

Setup rules to respect

  • Does not include hardware, gate valves, piping, hoses, or fittings
  • Cannot be hung by straps or loaded on top
  • Leak reports exist, so seat and snug every connection carefully

Worth it for: camper and food truck builds where potable-water certification and fitting access both matter.

Skip the cube if: you need mounting hardware or valves in the box, or you plan to strap the tank rather than sit it on a floor.

Compact Kit

7. Barker 11917 — 26 Gallon Water Tank Kit

Food-grade polyethylene26 gallons

Short and tall instead of long — 26 gallons in a 21.5-inch footprint.

Trailer bays are not all long and flat. Some are short and deep, and that is where this Barker tank earns a look: 26 gallons packed into a shell that measures 21.5 inches by 14.9 inches by 26 inches. If your available space is vertical rather than horizontal, those numbers are the whole reason to shortlist it — the footprint is tiny compared with the 33- to 40-inch tanks above, even though capacity drops to 26 gallons.

The material is the selling point for food service. It is high-impact, non-toxic, food-grade polyethylene, described as tasteless, odorless, rust proof, and corrosion proof. On a hot dog cart or a small vendor setup where water touches food prep surfaces, that spec list is more relevant than raw gallons. All the inlets are hose-barbed — meaning the ports are sized to push a flexible hose over a ridged fitting and clamp it — which is a different plumbing style from the threaded NPT ports on the Class A Customs tanks and suits gravity-fed or simple hose runs.

Height is listed at 14-3/4 inches in the description and 26 inches in the item dimensions, so check both against your opening before you order — this is a tank that fits some bays the flat ones cannot, and fails others the flat ones clear easily. It is listed as a kit, but plan your own hose barbs and clamps around the barbed inlets, and vent it like any non-pressurized tank.

Built for the vertical bay: 26 gallons in 21.5 by 14.9 by 26 inches, with food-grade, tasteless, odorless polyethylene construction that suits concession and hand-wash setups.

Plumbing is barbed, not threaded: every inlet is hose-barbed, so if your trailer already runs NPT hardware, this tank needs adapters or a different hose strategy.

Pick it when: your opening is narrow and tall, or the water is headed for food service where food-grade material is the priority.

Move on if: you need threaded NPT ports to match existing plumbing, or you want more than 26 gallons.

Best for Big Families

8. Ameri-Kart WT-5549 Water Tank

36 gallonsImpact-resistant shell

Seven more gallons than the 29-gallon cube, in a shell only five inches longer.

This is the same Ameri-Kart design language as the 29-gallon cube above, scaled up to 36 gallons. The footprint grows to 37 inches by 16 inches by 15 inches, which means you pay five extra inches of length over the 32-inch WT-5077 and gain seven gallons. Empty weight is 18.81 pounds — light enough for one person to place, heavy enough that you want the bay measured before you lift it in. It is a cube shape, so it sits flush against a flat floor rather than rocking on a curved one.

The certification stack is identical: made in the USA from BPA-free material, IAPMO-listed, QAI Laboratories certified, meant for drinking, cooking, showering, and dishwashing water in RVs, motorhomes, trailers, campers, food trucks, and tiny houses. Fittings are two 1.5-inch balloon-style threaded female NPT ports and two 0.5-inch threaded female NPT ports, and the material is weather and impact resistant. The manufacturer notes the tank is sanitary and leak-proof; some owners do still report leakage at the connections, so tighten carefully and test before a trip.

Build quality and durability are the two things owners single out most in the feedback, and it holds up in a boat too — one use case mentioned is fresh water wash-down on a boat. Two limits from the maker: it cannot be hung by straps or have weight placed on top, and it ships without mounting hardware, gate valves, piping, hoses, or fittings. Value for money draws mixed views on this one, so weigh the certification and cube shape against the extras you will buy separately.

Strengths that show up

  • 36 gallons in a 37-inch cube — seven gallons more than the 29-gallon version
  • IAPMO, QAI, BPA-free, USA-made for potable water duty
  • Built and durable is the consistent read on the shell
  • 18.81 pounds empty for a manageable install

Budget for the extras

  • No hardware, valves, piping, hoses, or fittings included
  • Do not hang it by straps or stack weight on it
  • Mixed views on value and some leak reports at the connections

Made for: families and long trips where 29 gallons feels like it runs out mid-shower.

Not for you if: your bay is under about 37 inches, or you expect valves and mounting hardware to come in the box.

Maximum Capacity

9. Class A Customs T-5500 — 55 Gallon Fresh Water Holding Tank

55 gallons37.5 inches long

The most water in this lineup, and it is shorter than the 40-gallon shell.

Here is the number that will make you read it twice: 55 gallons in a tank that measures 37.5 inches at its longest point. The 40-gallon T-4000 above is 39.5 inches long — this tank holds 15 more gallons in two inches less length, because it grows upward and outward instead. The faces measure 17.5 inches and 19.5 inches, so it is a taller, fatter box than the mid-size shells. If you have height and depth in your bay but not endless length, this is the capacity king.

Construction follows the same recipe as its siblings: NSF-approved material, safe for fresh or gray water, polyethylene and resin, made in Elkhart, Indiana, and rotatable onto any side to change which face becomes your height. The fittings are two 1.5-inch female NPT ports and two 0.5-inch female NPT ports, with the larger pair sometimes shipping membrane-sealed for you to open with a razor knife. Forty-five-five gallons of water is a serious load, so confirm your trailer frame and floor are rated for it before you fill.

The rules do not change with size. It is non-pressurized, so vent it and fill by gravity — never clamp a hose on and turn it on. Use plastic connecting fittings rather than metal, and do not over-tighten the ports, because a cracked port on a 55-gallon shell means draining the whole thing. The manufacture date on the listing goes back a ways, but the design is the same proven Class A Customs shell in a bigger box.

The capacity outlier: 55 gallons at 37.5 inches long and faces of 17.5 and 19.5 inches makes it the biggest tank in the lineup on nearly the shortest footprint for its size.

The weight reality: a full 55-gallon tank is a heavy load — check your floor rating, vent the shell, and thread the ports gently.

The one to grab for: long off-grid trips and big trailers where the bay is tall and deep but not especially long.

Steer clear of it if: your floor or frame is not rated for a fully loaded 55-gallon tank, or you only need modest reserves.

Know the Specs

Capacity in gallons

The gallon figure tells you how much water the shell holds when full — 25, 26, 29, 30, 33, 36, 40, or 55 in this lineup. More gallons means more days between fills, but also more water weight on your frame and a longer or taller box to fit. Match capacity to your floor and frame weight rating first, then to the bay dimensions.

Footprint and rotation

The three measurements (longest length, then two faces) are what actually decide fit. On the Class A Customs tanks you can put the shell on any side and swap height for width, so a 12-inch face can become your height in a low bay. Measure the opening and leave slack — the makers allow roughly a quarter inch of variance per measurement.

NPT fittings

NPT stands for National Pipe Thread, a standard tapered thread that seals as you tighten. The common layout here is two 1.5-inch female NPT ports and two 0.5-inch female NPT ports. Some arrive membrane-sealed and need cutting open. Always use plastic connecting fittings and do not over-tighten — metal fittings and brute force crack plastic ports.

Non-pressurized and venting

Every tank here is non-pressurized, meaning it needs a vent so air moves in and out as water level changes. Never seal a garden hose to a port — the maker warns that a pressurized connection can burst the tank. Fill by gravity through a fill dish or an open inlet, and let the vent do the work.

Common Questions

Can I connect a garden hose directly to a trailer water tank?
No. These tanks are non-pressurized, and the makers explicitly warn that a sealed hose connection creates pressure the shell is not built to hold, which can burst the tank. Fill by gravity through a fill dish or an open inlet, and make sure the vent is clear so air can escape as water goes in.
What does NPT mean on a water tank fitting?
NPT stands for National Pipe Thread, a standard tapered thread that seals as you tighten it. The Class A Customs tanks and both Ameri-Kart cubes carry two 1.5-inch female NPT ports and two 0.5-inch female NPT ports. Use plastic connecting fittings and snug them rather than cranking hard — over-tightening damages the plastic threads.
How do I know which size tank will fit my trailer bay?
Measure the longest clear length, then the height, then the width between your frame rails, and leave a little slack because the makers allow roughly a quarter inch of tolerance per measurement. The Class A Customs tanks can be rotated onto any side, so you can swap the 12-inch or 17.5-inch faces into the height position to fit a low bay.
Can the same tank hold drinking water and gray water?
Several of them can. The Class A Customs shells are listed as safe for fresh or gray water, and the Ameri-Kart cubes are made from BPA-free material and listed against IAPMO or NSF standards for potable water. The Automotive Authority and Barker tanks also handle potable or gray duty. Whichever tank you pick, drain it when not in use and sanitize it before switching from gray to fresh duty.
Why do some tanks arrive with ports that are sealed shut?
A membrane-sealed port keeps debris out in transit. On the Class A Customs tanks, the 1.5-inch female NPT fittings sometimes ship with a thin membrane you remove with a razor knife before use, while the 0.5-inch ports are typically open. Check each port before you plumb and open only the ones you need.
Do these tanks come with mounting hardware and valves?
Usually not. The Ameri-Kart tanks specifically note they do not include mounting hardware, gate valves, piping, hoses, or fittings, and that you should not hang the tank by straps or place weight on it. The Barker 11917 is sold as a kit with barbed inlets, but plan your own clamps and connections. Budget separately for gate valves, piping, hoses, and fittings, which these tanks do not include.
How much does an empty trailer water tank weigh?
It varies widely with size. The 30-gallon Class A Customs T-3000 and the 33-gallon T-3300 both list 18 pounds, the Ameri-Kart cubes list 17.14 and 18.81 pounds, the 25-gallon T-2500 lists 38 pounds, and the 40-gallon T-4000 lists 49 pounds. Empty weight is what you lift into the bay; a full tank adds 8.3 pounds per gallon on top of that.
Is a hose-barbed tank harder to install than an NPT tank?
It is a different style rather than harder. The Barker 11917 uses hose-barbed inlets, meaning you push a flexible hose over a ridged fitting and clamp it. That suits gravity-fed or simple hose runs. If your trailer already runs threaded NPT fittings, you would need adapters to work with a barbed tank.
Where are these trailer water tanks made?
The Class A Customs tanks are manufactured in Elkhart, Indiana, in the USA. The Ameri-Kart cubes are made in the USA in Elkhart County, Indiana, and both carry QAI Laboratories certification. Knowing the maker and build location helps when you need warranty support or replacement NPT fittings later.
Can I mount a water tank on its side to save height?
On the Class A Customs shells, yes — the maker says the tank can sit on any side and be rotated to change height or width. That is how a 12-inch face becomes your height in a shallow bay. The Ameri-Kart cubes are built as cubes meant to sit flat, and the maker warns against hanging them by straps or loading weight on top.

The Bottom Line

For most trailer builds, the water tank for trailer to buy is the Class A Customs T-3000 because 30 gallons, a rotatable 34.5-inch shell, an 18-pound empty weight, and four built-in NPT ports cover fresh or gray duty with the least fuss. If headroom is your binding limit, get the10-inch-shallow Class A Customs T-2500, which packs 25 gallons into a shell with a 10-inch face. And if the bay is tall and deep rather than long, the Class A Customs T-5500 puts 55 gallons into 37.5 inches of length — the most water in this lineup, in two inches less length than the 40-gallon shell.

One last nudge, and it is a measuring one: the T-3000 is the safest starting point because its quarter-inch-tolerance shell rotates, its ports match the widest range of off-the-shelf fittings, and its 18-pound empty weight means you can dry-fit it alone before you commit to cutting a hole. Measure your bay twice, vent the tank, and never clamp a hose directly to a port — that rule keeps a plastic trailer tank alive for years.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top