7 Best Water Hammer Arrestor for Refrigerator | Stop The Knock

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

If your ice maker refills with a jolt that rattles the whole kitchen wall, the fix is a small shock-absorbing tee called a water hammer arrestor, and the right one depends on the fitting on your supply line. Most refrigerator lines end in either a 1/4 inch compression outlet or a 3/8 inch compression outlet, and buying the wrong thread is the number one reason a fix that should take minutes turns into a return. This guide sorts that out for you: what each arrestor connects to, how much pressure and heat it can take, and which one fits the fridge setup you actually have.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

You will see the connection sizes side by side, the pressure ratings spelled out, and the honest fit notes that separate a quiet ice maker from a leaking joint. Here is the straightforward breakdown of the water hammer arrestor for refrigerator options worth your time.

Top Picks

EFIELD Push-fit Ice Maker Outlet Box, SS Arrestor
Best OverallEFIELD Push-fit Ice Maker Outlet Box, SS Arrestor4.5+★100+ ratingsOne box that handles the valve and the bang, no extra parts to source. For a fresh ice maker rough-in, the EFIELD push-fit box is the closest thing to a one-stop answer on this list.Check price on Amazon
EFIELD MH-230-2-FM Tee Copper Water Hammer Arrestor, 3/8' OD Compression
Compact PickEFIELD MH-230-2-FM Tee Copper Water Hammer Arrestor4.0+★30+ ratingsThe lightweight brass tee that threads straight onto a 3/8 inch line. Check this inline tee if your ice maker or dishwasher supply ends larger than the common 1/4 inch fitting.Check price on Amazon

How To Choose The Best Water Hammer Arrestor for Refrigerator

The bang you hear is a pressure spike. When the ice maker’s fill valve snaps shut, the moving water stops fast and that energy has to go somewhere, so it shakes the pipe and the wall behind it. An arrestor is a small capped chamber with a piston inside that soaks up that spike. Your job is picking the one whose threads match your line and whose body survives the pressure behind it.

Match the connection before anything else

Refrigerator supply lines commonly end in a 1/4 inch compression outlet, and a few setups use 3/8 inch. Check the nut on your existing shutoff valve with a ruler or a quick look at the packaging of your ice maker line. A 1/4 inch OD compression tee like the SUPPLYGIANT or the Sioux Chief threads straight on. A 3/8 inch tee fits the larger line. Getting this wrong is the one mistake no return policy fixes quickly.

Check the pressure and temperature rating

Residential lines usually run well under 100 PSI, but a rating tells you the margin built into the body. The EFIELD copper tee is rated to a max working pressure of 250 PSI and a max temperature of 250 F, while the SECKWHALE is rated up to 250 PSI and 180 degrees Fahrenheit. Higher ratings mean more headroom, which matters on a line you cannot easily reach once it is behind the fridge.

Decide between an arrestor alone and a full outlet box

If your ice maker valve already has a good box in the wall, you only need the small tee. If you are roughing in new plumbing or replacing a bare stub, an outlet box with the arrestor and valve already installed saves you assembly time. The EFIELD push-fit box and the Lidertik box both arrive with a valve and arrestor in place.

Look at the material and certifications

Brass and copper bodies resist corrosion and hold up to years of on-off pressure cycling. Watch for a lead-free note and a reference to NSF 61, the standard covering materials that touch drinking water. The EFIELD box and the EFIELD copper tee both comply with NSF-61, and the SECKWHALE carries a lead-free brass body that complies with UPC and NSF requirements.

Side-by-Side Comparison

Model Best For Connection Max Pressure Type Amazon
EFIELD Push-fit Ice Maker Outlet Box, SS Arrestor★ Best Overall New installs and rough-ins 1/2″ push-fit inlet, 1/4″ OD compression outlet — Outlet box with valve Amazon
EFIELD MH-230-2-FM Tee Copper ArrestorCompact Pick Compact tee for dishwasher and fridge lines 3/8″ compression x 3/8″ female compression 250 PSI Inline tee Amazon
Lidertik Ice Maker Outlet Box With Hammer Arrestor Simple push-to-connect box install 1/2″ push to connect inlet, 1/4″ compression outlet — Outlet box with valve Amazon
SUPPLYGIANT IS-BB-36DPNQ Compression Tee 1/4″ OD fridge lines 1/4″ OD x 1/4″ female OD Type AA — Inline tee Amazon
EFIELD Ice Maker Box, 1/2″ Pex Crimp Inlet, SS Arrestor PEX plumbing systems 1/2″ barb crimp PEX inlet, 1/4″ OD compression outlet 125 PSI Outlet box with valve Amazon
SECKWHALE Tee Stainless Steel Arrestor (2-Pack) Two valves or a spare on hand 3/8″ OD compression x 3/8″ female compression 250 PSI Inline tee Amazon
Sioux Chief Mini-Rester Water Hammer Arrestor Quiet, low-profile 1/4″ OD fix 1/4″ OD compression tee — Inline tee Amazon

Detailed Reviews

★ Best Overall

1. EFIELD Push-fit Ice Maker Outlet Box, SS Arrestor

Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.

1/2″ Push-Fit InletPre-Installed Valve and Arrestor

One box that handles the valve and the bang, no extra parts to source.

For a fresh ice maker rough-in, the EFIELD push-fit box is the closest thing to a one-stop answer on this list. You connect the supply pipe without soldering, thanks to the 1/2 inch push-fit inlet (a fitting you just push the pipe into and it seals). The 1/4 inch OD compression outlet (OD means outside diameter) is the size that feeds most refrigerator ice maker lines, so it matches the hose you likely already have. It arrives with a 1/4 turn lead-free brass valve and a copper hammer arrestor (a chamber that absorbs the shock that causes the bang) already installed. That means the shock-absorbing chamber is built into the same assembly that turns your water on and off.

The box itself is built to drop into a standard opening. The rough opening measures 5 inch x 3-1/2 inch x 2-3/4 inch, and the snap-on faceplate is 6-1/2 inch x 5 inch. Because it is a one-piece box-and-flange design, it needs no extra support framing behind the drywall, which keeps a wall-opening job moving. The body is stainless steel and the valve meets NSF 61-G requirements, the drinking-water material standard that matters for anything feeding an ice maker.

Owners talk about installation most, and the push-fit work and single-piece body keep the job short. There is a disconnection clip tool included, and you will want it if you ever need to pull the fitting back off. The trade-off is structural: this is a full box that needs a wall cavity, so it is not the pick for a quick screw-on fix where your valve and box are already set. It suits a new install or a remodel, not a five-minute add-on.

Worth wiring in

  • Push-fit 1/2 inch inlet seals with no soldering
  • Valve and copper arrestor come pre-installed
  • One-piece flange needs no support framing
  • Meets NSF 61-G for drinking-water materials

The honest catch

  • Needs a 5 x 3-1/2 x 2-3/4 inch wall opening to fit
  • Not a screw-on tee for an existing valve

Reach for this if: you are installing or replacing an ice maker box and want the valve and shock protection in one unit.

Look elsewhere if: your valve is already mounted and you just need a small inline tee.

Compact Pick

2. EFIELD MH-230-2-FM Tee Copper Water Hammer Arrestor

3/8″ x 3/8″ Compression250 PSI Rating

The lightweight brass tee that threads straight onto a 3/8 inch line.

Check this inline tee if your ice maker or dishwasher supply ends larger than the common 1/4 inch fitting. It carries a connection of 3/8 inch compression by 3/8 inch female compression, so it fits that bigger line. Built from copper and brass, it weighs 0.24 kg, one of the lighter pieces in this group, which makes it easy to work into a tight cabinet corner. The rating is the part that reassures: a max working pressure of 250 PSI (pounds per square inch) and a max working temperature of 250 F give it plenty of headroom for a residential line, so it holds up to normal household water pressure without strain.

The job it does is reduce the unstable pressure and noise that travels back into the appliance. When the ice maker valve shuts, that spike gets absorbed in the sealed body instead of kicking the pipe, and the softer pushback protects the appliance control. It complies with NSF-61 and is lead-free, so it is safe on a drinking-water line. Buyers report the hammering going quiet on both fridge lines and sink and shower feeds.

The thing to weigh honestly is durability. Reviews on reliability are mixed: some buyers find it works great, while others report it stops absorbing after a short time. Treat this as the light, compact option that fits a 3/8 inch line well, and know that a hard-water area or a very high-pressure line may wear the internal seal faster. It is a fair buy when the fit is right, not a part to lean on in a punishing setup.

What it is good at: A small, lightweight brass tee that handles a 3/8 inch line and a 250 PSI, 250 F rating without strain.

Best matched to: a fridge or dishwasher line that ends in a 3/8 inch compression fitting.

Worth noting: the long-term reliability is a mixed report, so check your line pressure if the first one wears out.

Top Performer

3. SUPPLYGIANT IS-BB-36DPNQ Compression Tee Hammer Arrestor

1/4″ OD Type AAHorizontal or Vertical

The proven workhorse for a plain 1/4 inch fridge line, and the most-reviewed here.

This is the option that matches the most common refrigerator setup: a 1/4 inch OD compression tee, Type AA, connecting 1/4 inch OD to 1/4 inch female OD. The copper body weighs 4 ounces, and that puts it 2.24 ounces lighter than the SECKWHALE tee, which makes it easier to tuck behind a shutoff valve without stressing the pipe. It can be installed horizontally or vertically, so the layout of your cabinet does not box you in.

The function side is where it earns its place. The arrestor stops the pipe banging noise common in a plumbing system and takes pressure off the joints by absorbing the spike at the source. Owners mention it solving real problems, including a booster pump on an RO system, and the fill valve going inaudible once it is in. Function and easy installation are the standout strengths; the install takes only simple tools.

The single caveat to plan around is the fitting. Leakage from the connection is the recurring gripe, so seat the compression nut squarely and snug it in stages rather than cranking it down. A little care on the joint and this is a reliable, quiet fix. If you have a standard 1/4 inch ice maker line and you want a part with a deep track record behind it, this is the one most fridge owners end up with.

Where it shines

  • Fits the standard 1/4 inch OD fridge line
  • Installs horizontally or vertically
  • Copper body at just 4 ounces
  • Quiets pipe banging and eases joint pressure

Watch the joint

  • Leaks trace back to the fitting, so seat it carefully
  • Snug in stages rather than over-tightening

My top pick for a standard line: a 1/4 inch OD refrigerator feed that needs a quiet, low-weight tee.

Give it care if: you are reusing an old compression nut — a clean new ferrule seals more predictably.

Best Value

4. Lidertik Ice Maker Outlet Box With Hammer Arrestor

Push to Connect InletBrass Ball Valve

A no-solder box that brings the valve and the shock absorber together.

If you want a box without a torch and you are working with push-to-connect pipe, the Lidertik is a sensible, budget-minded choice. It takes a 1/2 inch push to connect inlet and feeds a 1/4 inch compression outlet, the standard pairing for an ice maker supply. A brass ball valve and a hammer arrestor are both built in, and the arrestor’s job is spelled out plainly: absorb shock and reduce noise so the bang does not travel up the wall.

The build is white plastic for the housing with a brass valve finish, and the connector types cover push to connect plus compression, which suits a fresh rough-in. The unit is heavier than the bare EFIELD copper tee, at 0.42 kg, because there is a full box shell around the valve and arrestor. That heft is normal for a boxed assembly and it also tells you the body is substantial rather than a bare fitting.

The catch with this one is simply a thinner track record. It carries fewer ratings than the long-established tees, so you are buying on spec and easy install rather than years of owner reports. The upside is a compliant, complete assembly for a straightforward ice maker install. That makes it a fit choice for a DIY box replacement where push-fit connections are already your plan.

The value read: A compliant box with brass valve and arrestor pre-installed, built for push-to-connect, at the entry end of the group.

The number to know: 1/2 inch push to connect in, 1/4 inch compression out — the standard ice maker pairing.

Fits the bill if: you are replacing an ice maker box and want push-to-connect with the arrestor included.

Think twice if: you want a long paper trail of owner experience before you commit.

Built for PEX

5. EFIELD Ice Maker Box IM020

1/2″ PEX Crimp Inlet34–180°F Working Range

The one to pick when your supply pipe is PEX and you need a crimp connection.

If your house runs PEX pipe (a flexible plastic plumbing pipe), this box is set up for exactly that. The inlet is a 1/2 inch barb crimp PEX connection, which means you slide the pipe onto the barb and crimp a ring around it. The outlet is a 1/4 inch OD compression that fits an ice maker hose with a 1/4 inch thread, so your existing fridge line screws right on. A 1/4 turn brass stop valve and a stainless steel water hammer arrestor come pre-installed, so the box shuts off and absorbs shock in one assembly.

The working envelope is the useful spec here: it operates between 34 degrees Fahrenheit and 180 degrees Fahrenheit with a working pressure of 125 PSI. That range comfortably covers a fridge supply line in a normal home. The snap-on faceplate is 6 inch x 6 inch and the rough opening is 5 inch x 3 inch x 2 inch, so check your cutout before you buy. It complies with NSF 61-G, the drinking-water material standard, and the housing is stainless steel, brass, and ABS plastic.

The limitation is that this box only makes sense if your plumbing is PEX and you own or can borrow a crimp tool. On a copper or push-fit system it is the wrong part. But if you are finishing a PEX-fed ice maker install and want the valve and arrestor together, it lines up cleanly with the rest of the job. Match it to your pipe type and it earns its keep.

Made for PEX runs

  • 1/2 inch barb crimp PEX inlet for PEX systems
  • 1/4 inch OD compression outlet fits common ice maker hoses
  • Valve and stainless arrestor pre-installed
  • Meets NSF 61-G for drinking-water materials

Where it falls short

  • Needs a crimp tool and PEX pipe to be worth buying
  • Capped at 125 PSI, so check your line pressure

Pick it when: your ice maker supply is PEX and you want the box, valve, and arrestor in one crimped assembly.

Leave it if: your pipe is copper or already ends in a push-fit connection.

Two-Pack Pick

6. SECKWHALE Tee Stainless Steel Water Hammer Arrestor 2-Pack

3/8″ x 3/8″ CompressionC46500 Brass Body

Two stainless-backed tees, one for the valve and one for the spare box.

The reason to look at this one first is simple: you get two arrestors in the pack, so a second valve gets quieted or you keep a spare. The body is made from high-quality C46500 brass, chosen for its resistance to corrosion and abrasion, so it is built for the on-off cycling a refrigerator valve puts it through. Each unit rates up to 250 PSI and 180 degrees Fahrenheit, which covers a residential fridge line with room to spare. The connection is 3/8 inch OD compression by 3/8 inch female compression.

The install is flexible in the way that matters behind a cabinet: it can go horizontally or vertically, so your shutoff position does not dictate the fit. The pack meets American standards and complies with UPC and NSF requirements, so it checks the compliance boxes you want on a drinking-water line. Owners call it easy to install, and customers note it can eliminate the hammering in about five minutes once it is seated.

Set against the SECKWHALE, the SUPPLYGIANT tee is 2.24 ounces lighter, and that matters if you are squeezing behind a tight valve. The other point to note is fit. The connection sizes are specific, so a line that is not a 3/8 inch compression will not be the right match, and getting the joint right on the first try is worth the extra minute.

Why the pack makes sense: A C46500 brass body rated to 250 PSI and 180 F, doubled up so a second valve or a spare is covered.

The trade-off: It is heavier than the SUPPLYGIANT at 6.24 ounces, and it only suits a 3/8 inch line.

Good buy for: a 3/8 inch fridge or dishwasher line, or two valves that both need quieting.

Skip the fit mismatch: a 1/4 inch line needs a different tee, not this one.

Quietest Fix

7. Sioux Chief Mini-Rester Water Hammer Arrestor

1/4″ OD CompressionLead-Free, US-Made

A low-profile, lead-free 1/4 inch tee that is all about quiet.

Sioux Chief’s Mini-Rester is a slim 1/4 inch OD compression tee made in the United States, and the draw here is noise control. Owners say it kills the slamming and pipe rattle a snapping ice maker valve sends through the wall. At 6 x 2 x 0.5 inches it is a thin, flat profile, which helps it disappear behind a valve rather than crowd the space. It carries a lead-free designation, so it is suitable on a line feeding drinking water and ice.

Installation is on the simpler end of the tees in this group. It is a straightforward compression tee job, and owners put the work at about ten minutes from start to finish. The body finish is brass in a gold and silver tone, and the small footprint means it tucks into tight spots. If your goal is a refrigerator line that stops announcing every fill, this is the purpose-built choice for that single job.

The trade-off is focus. This is a bare 1/4 inch tee, not a box, so it only helps if your valve is already set and your line ends in 1/4 inch compression. It also has the fewest reviews of the small tees, so you are leaning on a proven brand and its noise-reduction reputation. For the right line, that is plenty. For a rough-in, you want a box instead.

Its whole job is hush

  • Quiets slamming and pipe rattle at the source
  • Thin 6 x 2 x 0.5 inch profile tucks behind a valve
  • Lead-free and made in the United States

The limits

  • Bare tee only — no valve or box included
  • Fits a 1/4 inch OD line and nothing larger

Choose this when: your valve is in place, your line is 1/4 inch OD, and you just want the rattle gone.

Pass on it if: you are starting a new install and need the box and valve too.

Know the Specs

Compression Connection Size (1/4 inch vs 3/8 inch)

Compression means the fitting compresses a small ring, called a ferrule, against the pipe to seal it. The size — for example 1/4 inch OD or 3/8 inch OD — is the outside diameter of the pipe it grips. A 1/4 inch OD tee fits the most common refrigerator ice maker line. A 3/8 inch tee fits a larger line. Measure your existing nut before you buy, because a mismatched thread will not seal no matter how tight you make it.

Maximum Working Pressure (PSI)

PSI stands for pounds per square inch, a measure of how much water pressure a part can hold. Residential lines tend to run well under 100 PSI, so a tee rated to 250 PSI gives you a wide safety margin. The EFIELD copper tee and the SECKWHALE both carry that 250 PSI rating, while the EFIELD PEX box is rated to 125 PSI. Higher ratings mean more cushion on a line that is hard to reach behind the fridge.

Push-Fit, PEX Crimp, and Compression Inlets

The inlet type tells you how the box joins your supply pipe. Push-to-connect lets you push the pipe into the fitting to seal it, with no soldering. PEX crimp slides pipe onto a barb and crimps a metal ring around it. Plain compression uses a nut and ferrule. Match the inlet to the pipe you already have — push-fit for convenience, PEX crimp for a PEX system, and compression for small appliance lines.

Working Temperature Range

Temperature rating tells you the hottest water the part tolerates. The EFIELD copper tee handles up to 250 F, the SECKWHALE and the EFIELD PEX box stop at 180 F, and the EFIELD PEX box is rated from 34 F up. A refrigerator supply runs cold, well inside any of these ranges, so for fridge use the temperature figure is reassurance rather than a limit. It matters more if you share the part with a hot-water appliance.

Common Questions

Will a water hammer arrestor work on my refrigerator ice maker line?
Yes, as long as the connection size matches your line. Most ice maker lines end in a 1/4 inch OD compression outlet, which suits the SUPPLYGIANT or the Sioux Chief tee. If your line is larger, a 3/8 inch tee like the SFIELD MH-230-2-FM or the SECKWHALE fits. Check the nut on your shutoff valve first, then buy the tee that threads onto it.
Do I need a full outlet box or just the small tee?
It depends on what is already in your wall. If you have a working valve and box, a bare tee such as the Sioux Chief or the SUPPLYGIANT is enough. If you are roughing in new plumbing or replacing a bare stub, an outlet box with the valve and arrestor pre-installed — like the EFIELD push-fit box or the Lidertik box — saves you assembly time and keeps everything in one unit.
What pressure rating do I need for a fridge supply line?
Residential lines typically run well below 100 PSI, so a part rated to 250 PSI gives comfortable headroom. The EFIELD copper tee and the SECKWHALE both carry a 250 PSI max working pressure. The EFIELD PEX box is rated to 125 PSI. If you are unsure of your home pressure, a higher rating simply means more margin on a line that is awkward to reach.
Will an arrestor stop the banging behind my wall?
It targets the cause. The bang happens when the ice maker valve snaps shut and the moving water stops fast, sending a pressure spike into the pipe. The arrestor absorbs that spike in a sealed chamber so the pipe does not shake. Owners of these tees describe the slamming and rattle going quiet once the part is installed correctly on a matched line.
Can I install a water hammer arrestor myself?
For an inline tee on an existing compression joint, yes, with basic tools. Owners put the Sioux Chief tee at about a ten-minute job, and the SECKWHALE at roughly five minutes to clear the hammering once seated. A PEX crimp box like the EFIELD IM020 needs a crimp tool. Push-to-connect boxes need no soldering, which keeps a DIY job simple.
Why does my arrestor leak at the fitting?
Leaks almost always trace to the compression joint, not the arrestor body. If the ferrule is seated crooked or the nut is over-tightened, the seal can fail. Seat the nut squarely and snug it in stages. The SUPPLYGIANT has a recurring note about fitting leaks, which is a reminder to take the joint slowly rather than crank it down hard.
Is a lead-free arrestor required for an ice maker line?
Because the ice maker line feeds drinking water, a lead-free part is the safe choice, and several picks here state it. The EFIELD push-fit box and the EFIELD copper tee comply with NSF 61-G, the drinking-water material standard. The Sioux Chief is sold as lead-free. The SECKWHALE complies with UPC and NSF requirements. Look for that note on any part you put on a drinking-water line.
How long does a water hammer arrestor last?
It depends on the internal seal and your water conditions. Brass and copper bodies resist corrosion, but the reliability picture on the EFIELD copper tee is mixed, with some units losing effectiveness over time. A hard-water area or very high line pressure can wear a seal faster. That is one reason a two-pack like the SECKWHALE gives you a spare when the first one eventually fades.
Can I install the arrestor horizontally or vertically?
Both orientations are fine on the models that state it. The SUPPLYGIANT can be installed horizontally or vertically, and the SECKWHALE is described as flexible the same way. That freedom matters in a tight cabinet where the valve sits in an awkward spot. Orientation does not change how the arrestor absorbs the shock.
What is the difference between a push-fit box and a PEX crimp box?
It depends on how the box grips the supply pipe. A push-fit inlet, like the EFIELD push-fit box and the Lidertik box, seals when you push the pipe in, with no soldering and no crimp tool. A PEX crimp inlet, like the EFIELD IM020, slides onto a barb and needs a crimp ring and a crimp tool. Match the box to your pipe type — PEX crimp for a PEX system, push-fit for convenience.

The Bottom Line

The winner in this lineup for most people is the EFIELD Push-fit Ice Maker Outlet Box, because it puts the push-fit connection, the lead-free valve, and the copper arrestor in one piece that drops into a standard wall opening. If your valve is already in place and your line is a standard 1/4 inch OD, the SUPPLYGIANT tee is the well-traveled, quiet fix. When space is tight, the Sioux Chief Mini-Rester is the slim, quiet specialist. Find your connection size first, match the part to it, and the bang behind the fridge goes away.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top