Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A washing machine that walks across the laundry floor during a spin cycle is usually not dying — it is riding on worn shock absorbers. These are the strut-like dampers that soak up the drum’s movement, and when they go soft, the drum slams against the cabinet. The fix is a set of replacements, and this guide narrows the field to the nine sets that actually match the machines buyers own, with the part numbers, fit notes and honest wear reports spelled out.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You will see which set fits Whirlpool-built drum washers, which one is the genuine LG part, and where the budget kits cut corners. The top pick covers the widest range of Whirlpool-built front loaders and ships four dampers with eight brackets in the box. Below is the full breakdown of the washer shock absorber sets worth your time.
Top Picks



How To Choose The Best Washer Shock Absorber
The single most important step happens before you buy anything: confirm the part number. Pull one old shock out of the machine, read the number stamped on the body, and match it to the replacement list. A set that looks identical on a product photo can still be the wrong length for your tub, and the wrong length means it will not seat on the mounting pins.
Match the brand family, then the number
Whirlpool, Maytag, Kenmore and KitchenAid front loaders share one family of damper parts, which is why you see numbers like 8182703 and 8182812 on the same sets. LG and Kenmore Elite machines use a different family built around the 383EER3001 code. GE and Hotpoint washers take yet another, the WH01X series. Crossing families does not work, so start with the badge on your machine and then confirm the number.
Count your shocks before you order
Most front loaders use three or four dampers, and it is wise to replace all of them at once. If you swap two and leave the third original, the fresher pair does more of the work and the drum still rides unevenly. You will see this in the verified comparison data: the 8182703 Whirlpool-style set ships as a four-pack, while the genuine LG single is one part. If you need four, one unit will not finish the job.
Look at length, not just the photo
Compressed and extended length tell you whether a damper will physically work in your cabinet. A GE-style damper lists an extended length of 4.5 inches, a short strut built for that drum layout. LG-style dampers run much longer — one Techecook set states 11.7 inches extended and 7.5 inches compressed. Short and long parts are not interchangeable, so this number matters more than the colour or the shape of the mounting eye.
Side-by-Side Comparison
| Model | Best For | Fits Brand Family | Pack Count | Length Spec | Amazon |
|---|---|---|---|---|---|
| 8182703 4-Pack by EZA Trading★ Best Overall | Whirlpool-built front loaders | Whirlpool, Maytag, Kenmore, KitchenAid | 4 shocks + 8 brackets | — | Amazon |
| LG 383EER3001V Genuine OEMGenuine OEM | Sticking with the factory LG part | LG | 1 | — | Amazon |
| NKNP WP8182703 4-PackAlloy Steel Set | Alloy steel build on a budget | Whirlpool, Maytag, Kenmore, KitchenAid | 4 | — | Amazon |
| GREALTH 383EER3001V Kit | LG and Kenmore Elite owners | LG, Kenmore Elite/Sears | 3 shocks + 6 pins | — | Amazon |
| Techecook ACV72909503 Kit | Long warranty coverage | LG | 3 shocks + 6 pins | 11.7 in extended / 7.5 in compressed | Amazon |
| Salugre W10822553 4-Pack | Stainless steel dampers | Whirlpool, Amana, Maytag, Kenmore, KitchenAid | 4 | — | Amazon |
| TOMOON 383EER3001G Kit | Higher spin speeds that need control | LG | 3 shocks + 6 pins | 11.7 in extended | Amazon |
| Semzohc WH01X20826 Kit | GE washer owners | GE | 4 shocks + 4 pins | 4.5 in extended | Amazon |
| 8182812 4-Pack by EZA Trading | Older Whirlpool Duet and Maytag models | Whirlpool, Maytag, Kenmore/Sears | 4 shocks + 8 brackets | 9.5 in extended | Amazon |
Detailed Reviews
1. 8182703 Washer Shock Absorber 4-Pack
Our pick — 4.5+★ from 850+ verified ratings; the strongest balance of quality and price.
Four dampers, eight brackets, one box — the most complete fix for a shaking Whirlpool-built drum.
The headline here is the count and the hardware. You get four shock absorbers plus eight mounting brackets in a single package, so a four-damper machine gets every corner refreshed at once. The part replaces 8182703, AP3868181, 1173231, 8181646 and PS989596, and it is aimed at Whirlpool, Maytag, Kenmore/Sears and KitchenAid front loaders.
Compatibility is the wide part of the story. The model list covers GHW9150PW0, GHW9400PW4, WFW8300SW05 and dozens more — genuinely useful if your machine badge reads Kenmore Elite He3t or Whirlpool Duet. Each damper weighs 15.36 ounces and is built from metal with a black finish. Since a soft damper is what lets the tub slap the cabinet, a stiffer new set is the whole point of the job, and this one is plug and play with no adapter or modification needed.
What wins people over is the ease of the job. The install instructions walk you through the swap, and the plug-and-play fit means no drilling or bracket fabrication. Note against the competition: this set four-packs a part that the genuine LG option ships as a single unit, so if you have four dampers to change, this is the more practical buy of the two. The recurring honest catch is lifespan — some units soften and the machine starts banging again after a stretch of use. The one-year replacement warranty is the safety net if a damper softens early.
Where the value sits
- Four shocks and eight brackets in one box, so a four-damper machine is fully refreshed
- Direct replacement for 8182703, AP3868181, 1173231, 8181646 and PS989596
- Plug and play — no modification or adapter required
- Backed by a 1 year replacement warranty
The honest trade-off
- Some sets soften with heavy use and the shake can creep back
- Compatibility is brand-family specific, so GE and LG machines need a different part
Reach for this if: your badge says Whirlpool, Maytag, Kenmore or KitchenAid and the drum is walking during spin.
Look elsewhere if: you own an LG or GE front loader — the part number and the length are different families.
2. LG 383EER3001V Genuine OEM Shock Absorber
The factory part, straight from LG — one damper, exact specification, zero guesswork.
When the part bears the same badge as the machine, the compatibility question mostly disappears. This is LG’s own 383EER3001V, manufactured to the original specification and sold as a single unit. It sits on the outer position of the drum assembly and does the job the name suggests: it swallows the vibration and movement of the outer tub so the cabinet does not take the punishment.
The case for going genuine is the fit and the material. LG states the part is built from premium materials for durability and an exact fit, and that means no shimming or filing to get the eye over the mounting pin. Against the aftermarket kits, the difference is packaging: this is one damper, where the four-pack options put a full set in the box. If you are chasing one failed strut on a machine whose others are still firm, buying carefully by the unit can be the tidy route.
The honest limit is not the fit but how long the damping holds. Damping performance across owner experience is not uniform — some machines come out of the repair smooth on the spin, while other reports describe the new part feeling closer to a very old one than expected. Two dampers in a machine bought at different times can also behave differently. Weigh that against the genuine badge and the straightforward installation, and this is a sensible pick for a single-unit top-up rather than a full-drum refresh.
Factory-spec fit: sold as one genuine LG damper manufactured to exact specification, which keeps the mounting simple.
What to expect: damping consistency is the thing to watch — some replacements feel like a crisp improvement, others less so over time.
Confident verdict: a solid one-damper fix for an LG owner who wants the branded part and an uncomplicated install.
One caveat: it arrives as a single unit, so a full set of worn dampers needs several orders.
3. NKNP 8182703 Washer Shock Absorber 4-Pack
Alloy steel dampers built to soak vibration out of a drum that keeps slapping the cabinet.
The material is what sets this set apart from the plastic-heavy options. These dampers are built from alloy steel, with a black alloy finish and a bolt-and-screw fastener setup. That spec matters because a damper’s whole job is to convert drum motion into resistance — a metal body is the difference between a strut that stays firm and one that wallows early.
This strut fits a long list of Whirlpool GHW and WFW washers, so you can likely match your machine without hunting further. It replaces WP8182703, 8182703, AP3868181, AP6011831, 1173231, 8181646, PS11745030 and PS989596. Compared with the set four ahead of it in this guide, the two agree on replacement numbers but differ on material — this one names alloy steel outright. The install notes are refreshingly specific: seat the bottom of the strut before engaging the top, and watch a video first if you are new to the job.
On the maintenance side, the brand is direct about what the part is for. If your machine runs irregularly, is noisy, shakes, and the barrel hits the cabinet during the dehydration cycle while the suspension spring is still intact, this is the right swap. Anything else — a snapped spring or a grinding bearing — is a different repair. The set is a newer listing with a small review base, so the long-term verdict is still forming while the fit and the material read clearly on paper.
The material story: alloy steel construction on a four-pack aimed straight at the WP8182703 replacement code.
Before you start: the instructions call for the bottom mount first and the top second, and a quick video saves a lot of fiddling.
Best matched to: Whirlpool-family owners who want a metal-bodied damper set at the entry tier.
Think twice if: you want a long track record to lean on — this listing is still building its history.
4. GREALTH 383EER3001S 383EER3001V Washer Shock Absorber Kit
Three dampers and six pins — the full LG set done in one order, warranty attached.
If your LG or Kenmore Elite drum has three dampers, this is the complete order. The box holds three shock absorbers plus six mounting pins, which is the right count for a three-damper machine and enough pins that losing one in the cabinet is not a disaster. It replaces 383EER3001S, 383EER3001J, 4774FR3118B and a long list of cross-reference codes including 1394936, AP5201523 and PS3522315.
Compatibility is spelled out by model, which saves a lot of guessing. The list runs WM3470HVA, WM2140CW, WM2240CW, WM2450HRA and WM8500HVA among others. Fit is the standout here: reviewers describe a noticeable difference after the swap, with the drum staying stable on its feet during operation instead of creeping. Vibration control is the headline benefit, and that is exactly what the part exists to do — cushion the outer drum so the cabinet stops absorbing the energy.
Quality also draws warm words, with owners describing it as a solid replacement for parts that LG has discontinued. The support promise is unusual for a repair part: the brand says it will answer within 12 hours and will send a new one or refund on a quality issue. The one thing to check before ordering is your damper count — a four-damper machine will need a second set, and the length is not stated here, so confirm your part number matches before you commit.
Why LG owners like it
- Three shocks and six pins in the box — a complete set for a three-damper machine
- Replaces a long cross-reference list including 383EER3001S and 383EER3001J
- Covers common LG models like WM3470HVA and WM8500HVA
- 1 year warranty with a stated 12-hour support response
What to check first
- No length spec listed, so match your part number carefully
- Four-damper machines need more than this set
Straight fit for: LG and Kenmore Elite front loaders with a three-damper drum.
Hold off if: you have not confirmed your damper count or your exact part code.
5. Techecook ACV72909503 ACV72909501 Washer Shock Absorber Kit
Ten years of coverage on a retractable LG damper set — the warranty is the bragging right.
The listing backs this three-damper LG kit with a ten-year warranty, the longest coverage in this guide. The kit holds three shock absorbers and six mounting pins, built from metal, ABS plastic and rubber. The specs are unusually complete for this category: a maximum extension of 11.7 inches and a maximum compression of 7.5 inches, measured in the listing’s own terms, which gives you something real to check against your old strut.
Two numbers decide whether this part fits: its extension and compression figures. Those describe how far the damper (the shock that soaks up drum movement) can reach and how far it can collapse, and they are what let it sit between the tub and the base. The listing states the strut is retractable with easy travel and smooth running. Buyers report the same thing again and again: it cushions and balances the drum, reduces noise, and holds the shake down at higher spin speeds. Owners mention it fixed heavy vibration issues.
Compared with the single genuine LG part, this kit ships the full three-damper set with the pins and the long coverage, so you finish the job in one order. Fit is tight to the LG family — the ACV72909503 and ACV72909501 codes along with the 383EER3001 series. The honest note is durability: some customers note these dampers softening sooner than hoped, which is exactly what the ten-year warranty covers. Treat the coverage as the hedge against exactly that.
The measurable advantage: 11.7 inches extended and 7.5 inches compressed, stated plainly so you can verify the fit before ordering.
The honest hedge: wear is the reported weak spot, and the ten-year warranty is what covers it.
The decisive pick: LG front loader owners who want the longest coverage on the set and the length figures in hand.
Know this: some sets do not outlast expectations, so keep the warranty paperwork.
6. Salugre W10822553 8182812 Washer Shock Absorber 4-Pack
Stainless steel dampers that go after the drum-on-cabinet rattle in Whirlpool-built machines.
Rust is the quiet killer of a damper that has spent years under a wet drum, so building the body from stainless steel is a practical choice. That is exactly the material listed here, paired with a four-pack count. The part is a brand-new genuine replacement aimed at Whirlpool, Amana, Maytag, Kenmore and KitchenAid front loaders, and it replaces 8182812, W10015830, W10261477, W10822553VP, 4273183, AP5985209 and PS11723173.
The symptoms it targets are the classic set — a drum moving excessively, noise, an unbalanced load, erratic running, or simply worn dampers. Quality is the most-discussed strength in owner feedback, with fit close behind, and that ordering makes sense: a replacement that seats cleanly and reads well made is most of the battle. Those same reports note how easy it is to get in, and the stainless build plus a 30-day warranty is the manufacturer’s backstop.
Check your model number before you buy: the 8182703 set at the top of this guide and this 8182812 set cover related but distinct replacement numbers, so confirm which one your machine lists rather than assuming either will do. Reviewers point out mixed shock performance across the reviews, which is not a fit problem — it is the nature of a wear part that meets a heavy drum. If the drum is slapping the cabinet, a fresh four-pack is still far cheaper than a new washer.
Material edge: stainless steel construction on a four-pack, which is a sensible choice against corrosion under a wet drum.
Fit note: replaces the 8182812 code, not the 8182703 code — check which your machine calls for.
Worth picking when: you own a Whirlpool, Amana, Maytag or KitchenAid front loader that calls for 8182812.
Skip the assumption: that every Whirlpool-family number will interchange — this set does not cover the 8182703 code.
7. TOMOON 383EER3001G Washer Shock Absorber Kit
Built for LG drums that spin fast enough to shake the floor — three dampers, six pins, ten years.
High spin speeds are where a weak damper shows itself, and this kit is pitched squarely at that problem. It ships three absorbers and six mounting pins, made from high-strength metal, ABS plastic and wear-resistant rubber. The stated goal is to kill violent shaking at high spin speeds and stabilise the drum, with exact OEM-spec dimensions. The extended length is listed at 11.7 inches, and each damper weighs 10.88 ounces.
Installation is the part buyers talk about most favourably. The listing calls it a 10-minute DIY job with a screwdriver and gloves, and owner reports back that up — it is described as straightforward, with one account finishing in about 30 minutes. No modification and no adapters are needed, and the kit cross-references a long part list including 383EER3001G, 383EER3001J, 4901ER2003A and 383EER3001V. Model coverage runs from CW2079 and WM2233 up to the WM8000HVA.
Now the part you need to hear plainly. Vibration control draws the heaviest praise — machines come out of the repair as quiet as they were new. Durability, though, is the weak spot, and it is the most-raised negative in the feedback. Some dampers soften faster than expected, and value perception splits along that line. If your washer runs heavy loads on a high spin setting, budget for the possibility of doing this job again. The ten-year warranty is the brand’s answer to that concern.
What it does best: knocks out violent shaking at high spin speeds and quiets the drum back to new-machine levels.
The fair warning: durability is the reported shortfall on this kit, so the ten-year warranty is doing real work.
Pick it for: an LG front loader that rattles the floor on a fast spin and a quick DIY install.
The catch to accept: these dampers can wear sooner than you would like on heavy use.
8. Semzohc WH01X20826 Washer Shock Absorber Kit for GE Washers
The GE-family set — a short 4.5-inch damper, four of them, with pins in the box.
Most of this list is Whirlpool and LG territory, but GE washers run a different damper altogether, and this is the set built for them. The box carries four shocks and four pins, and the extended length is listed at 4.5 inches. That short figure is why you cannot swap a GE damper into an LG cabinet — the geometry is a different design, not just a different label.
The replacement list covers WH01X10343, WH01X20826, WH01X10425, WH01X10385, 1264427, AP4265856, AH1482318, EA1482318, WH01X10260 and PS1482318. Model coverage includes GBVH5140H0WW, GBVH5200J0WW, GCVH6260F0WW and GCVH6400J0WW among others. Functionality is the most-praised trait in owner feedback, with fit close behind, and the listing states each part is tested before delivery. If your machine is listed, the fit side is well covered.
There is one specific snag to know about. Owner feedback flags the pins being too big in some cases, and quality reads as mixed overall — so this is a set to approach with the old hardware kept on the bench. If the new pins do not seat cleanly, you have a fallback. For GE owners chasing a drum that shakes uncontrollably on the spin cycle, this is still the correct family of part, and the one-year guarantee covers a fault if one turns up.
The GE-specific pick: a 4.5-inch damper in a four-pack, which is the right geometry for GE and wrong for LG or Whirlpool cabinets.
Keep in mind: pin sizing has been flagged as a tight spot, so hold onto your original hardware during the swap.
Go this way if: your GE model appears on the compatibility list and the drum is running unstable.
Heads up: the pins can run large on some machines, so plan for that with your old set nearby.
9. 8182812 Washer Shock Absorber 4-Pack
A 9.5-inch strut in a four-pack — the fix for older Whirlpool Duet and Maytag drums.
The length is the first thing to note. This damper lists an extended length of 9.5 inches, which is its own geometry and not a figure you should assume will match every Whirlpool-family machine. That matters because the wrong length will not seat on the mounting bracket, however tempting the price looks. It replaces W10015830, W10822553, 8182812 and PS11723173, and it is sized for Whirlpool, Maytag and Kenmore/Sears washers.
The compatibility list reaches plenty of older units — GHW9300PW4, MFW9600SQ1, MFW9700SB1, MHWZ400TB01, WFW8200TW01, WFW9250WW02 and many more. Four shocks and eight mounting brackets come in the box, built from rubber with the same plug-and-play approach as the top pick. It ships with a 1 year replacement warranty, and the install instructions call for dry hands, power off, and a photo of the old part before you start.
Quality is the strongest signal in owner feedback, with functionality close behind, and the drum stability reports follow — a fresh set that seats properly takes the spring bounce out of the spin cycle. The point of difference from the 8182703 set higher up the list is that replacement number and that 9.5-inch length, so check the stamped code on your old damper rather than assuming either four-pack will do. The honest caveat: some shoppers say these 9.5-inch dampers softening under heavy use, so a repeat job is possible on a hard-working machine.
Why this one works
- Four shocks and eight brackets in one box
- Stated 9.5-inch extended length gives you a fit check before ordering
- Replaces W10015830, W10822553, 8182812 and PS11723173
- 1 year replacement warranty with clear install safety steps
Where it can fall short
- Durability is the weak link — some sets soften under heavy use
- Length-specific, so only fits the machines listed for the 8182812 code
The right buy when: your Whirlpool Duet or Maytag badge calls for the 8182812 code and you want all four dampers in one go.
Not for you if: your machine wants the 8182703 code or a longer LG-style strut.
Know the Specs
Extended and compressed length
These two figures describe how far a damper can stretch and how far it can collapse. A GE set listing 4.5 inches extended is a short strut, while an LG set at 11.7 inches extended and 7.5 inches compressed is a much longer one. Neither is better — the right number depends on the gap between your drum and the base of the cabinet. If your old damper’s number does not match, the part will not seat on the pins and the drum will not be supported properly.
Pack count and pins
A kit does not just hold dampers — it must hold enough to refill the drum and enough hardware to attach them. Most front loaders use three or four dampers, and the kits here spell out the count: three shocks with six pins, four shocks with eight brackets or four pins. Replacing only the failed units leaves the newest doing more work. Match the count to your machine, and confirm the pins and brackets are included so you are not waiting on a second order with the cabinet open.
OEM versus aftermarket
OEM means the part is made by the manufacturer that built your washer, so the fit and the specification are the originals. Aftermarket sets replicate the same replacement codes — which is why one listings shows a long list of numbers like 383EER3001V, 383EER3001J and AP4437743. Both routes can work; the OEM route removes fit guesswork, while aftermarket kits often bundle the full set and hardware. Read the replacement-code list and confirm your number appears.
Material and wear
A damper is a wear part, so what it is made of matters. You will see alloy steel, stainless steel, and metal-and-ABS-plastic builds in this list. A metal body resists the softening and surface corrosion that come with a wet drum over time, and the aftermarket listings talk about being retractable with smooth travel. Even the good ones soften eventually under heavy loads, so the warranty — one year on some sets, ten on others — is a real part of the purchase, not a footnote.
Common Questions
How do I know if my machine wants the 8182703 or the 8182812 damper?
Will a Whirlpool shock absorber fit an LG washing machine?
How many shock absorbers does a front load washer have?
How long should replacement washer shock absorbers last?
Do I need to replace the pins and brackets with the shocks?
Is a shaking washer always a shock absorber problem?
Can I install new shock absorbers myself?
Does an OEM LG damper perform better than an aftermarket kit?
How do I measure the length of my old shock absorber?
The Bottom Line
If your drum walks and bangs, the washer shock absorber that covers the widest range of machines is the 8182703 4-Pack by EZA Trading. It puts four dampers and eight brackets in one box, with a year of coverage behind it. If your badge is LG and you want the branded part, the LG 383EER3001V keeps the fit exact. If you want the longest coverage on an LG set, the Techecook kit answers that call with ten years on the label. And GE owners have their own answer in the Semzohc WH01X20826 kit, the short 4.5-inch damper built for that drum.
Do the one thing that separates a fast repair from a wasted order: read the part number off your old damper and match it before you buy. Whirlpool and Maytag machines want the 8182703 or 8182812 codes, LG wants the 383EER3001 family, and GE takes the WH01X series. Get that right and the rest is a screwdriver job — order the set that matches your code and ships the full damper and pin count.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





