7 Best Washer Dryer Stacking Kit | Stop The Dryer Wobble

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

A quick note on sizes: not every pick below is the exact size or number you searched — where the exact one is scarce, the nearest same-type option that serves the same purpose is included so you get real, in-stock choices. Each pick’s actual specs are listed.

Stacking a dryer on a washer is the fastest way to reclaim floor space in a tight laundry room, but only if the kit actually locks the two machines together. The wrong kit leaves you with a dryer that shifts every spin cycle, screws that do not match your model, or a bracket that never quite lines up with the holes. This list covers the kits that actually hold, sorted by which appliance brand they are built for.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

One honest note before you shop: stacking kits are brand- and width-specific, so this list uses flexible, human-like matching for a stacking kit designed to mount a dryer on top of a washer. Not every pick is the exact part number you searched for — the nearest same-type fit for your width serves the same purpose. Check your washer’s width in inches and its model number before you order. That single check is what separates a five-minute install from a return label, and it matters more than anything else in this washer dryer stacking kit roundup.

Top Picks

KSTK1 27-Inch Stacking Kit for LG Washer and Dryer
Best OverallKSTK1 27-Inch Stacking Kit for LG Washer and Dryer4.5+★800+ ratingsChrome-coated steel that turns two machines into one tall column and frees the floor underneath. If your LG front-loader is 27 inches wide, this is the kit to start with.Check price on Amazon
Lifetime Appliance SKK-8K Stacking Kit for Samsung 27-Inch Front Load
Samsung SpecialistLifetime Appliance SKK-8K Stacking Kit4.5+★350+ ratingsA Samsung 27-inch replacement kit that does the job — provided you check your screw situation first.Check price on Amazon

How To Choose The Best Washer Dryer Stacking Kit

You are not really shopping for a bracket; you are shopping for a dryer that stays put through the spin cycle. You are shopping for the confidence that a 100-plus pound dryer will not walk off the top of your washer mid-cycle. Three things decide that: your machine’s width, whether your kit bolts on or straps on, and whether the hardware in the box matches your model’s screw holes.

Match the width in inches first

Stacking kits are sold by washer width, not by brand alone. You will see 24-inch, 27-inch, 28-inch and 29-inch kits in this list, and a 27-inch bracket will not bolt cleanly onto a 28-inch GE cabinet. Measure the width of your washer’s top panel with a tape measure before you read any further. Then match that number to the kit’s stated size, and only then look at price or finish.

Bolted brackets versus ratchet straps

The OEM-style kits use metal side brackets screwed into the back of the washer, plus a stopper or spacer that traps the dryer’s feet. Universal kits often skip the drilling entirely and use a plastic rail with a ratchet strap cinched around both machines. Bolted kits are the more solid answer when the holes line up. Strap kits install in minutes with no tools and suit renters who do not want to put screws into an appliance.

Check the hardware list against your model

The single most common reason a stacking kit goes back is a screw that does not fit. Read the included-parts list and compare it to your washer’s rear panel. Kits that list exact model numbers — like the GE GFA28KITN list of GFW and GFD models — remove most of that guesswork. If your model is not named and you cannot find it in the listing photos, contact the seller before ordering.

Do not forget the feet

Some kits ship leveling dryer feet, and those feet do real work. They raise the dryer slightly so it sits in the bracket’s stopper, and they grip the washer top instead of sliding across it. If your kit does not include feet, check whether your dryer already has adjustable ones you can use.

Side-by-Side Comparison

Model Best For Stated Width Fit Mount Style Material Amazon
KSTK1 by Beaquicy★ Best Overall LG 27-inch front-load pairs 27 inches Side brackets with screws Chrome-coated stainless steel Amazon
Lifetime Appliance SKK-8KSamsung Specialist Samsung 27-inch front-load pairs 27 inches Bracket kit Not stated Amazon
Beaquicy SKK-7A / SKK8K Budget Samsung 27-inch replacement 27 inches Iron brackets with screws Metal and plastic Amazon
Kiss Core Universal W600 Mixed-brand homes, no drilling 24 to 29 inches Rails plus ratchet strap Plastic and steel Amazon
Kiss Core Universal SL-LJJ Tight spaces needing a fast strap install 29 inches Rails plus fix belt Plastic and steel Amazon
GFA28KITN by Arpfule GE 28-inch front-load pairs 28 inches Metal brackets with screws Carbon steel with anti-rust paint Amazon
Whirlpool W10869845 24-inch compact Whirlpool pairs 24 inches Hooked steel brackets plus feet Alloy steel, plastic, stainless steel Amazon

Detailed Reviews

★ Best Overall

1. KSTK1 27-Inch Stacking Kit for LG Washer and Dryer

Our pick — 4.5+★ from 800+ verified ratings; the strongest balance of quality and price.

Chrome-Coated Steel10-Year After-Sales Cover

Chrome-coated steel that turns two machines into one tall column and frees the floor underneath.

If your LG front-loader is 27 inches wide, this is the kit to start with. The KSTK1 is built from stainless steel with a chrome coating — a rust-resistant metal finish that keeps the brackets from corroding in a damp laundry room — and it holds the dryer on a stopper bracket so the machine cannot creep forward. You get 2 side brackets, 1 stopper bracket, 4 self-tapping screws and a stacking support guide in the box. That is the complete bolt-on set, no trip to the hardware store.

Installation is the part that sells it. You level the washer on the floor, lay the kit on the top panel, tape the side support in place, then drive the screws into the back of the washer. The kit is deliberately small, so once it is on you barely see it against the machines. Owners consistently call out how simple the fitting goes and how well it suits LG pairs specifically — the holes line up, which is the whole game with these parts.

The 10-year after-sales cover is the longest on this list, and on a chrome-coated steel bracket that only has to resist rust, that is a generous window. What wins people over is the plain functionality: the brackets line up, the dryer stays put, and the floor comes back. Worth weighing: it is listed for 27-inch machines, so a 28-inch GE cabinet or a compact 24-inch dryer will not line up with these brackets.

What the KSTK1 Gets Right

  • Chrome-coated stainless steel resists rust, corrosion and warping in humid laundry rooms
  • Complete bolt-on hardware: 2 side brackets, 1 stopper bracket, 4 self-tapping screws, 1 support guide
  • Small footprint — the kit stays hidden against the machines once fitted
  • Backed by 10 years of after-sales service from the maker
  • Fits most 27-inch front-load Samsung, LG and Whirlpool pairs

Where It Stops Short

  • Sized for 27-inch washers only — check your width before ordering
  • You supply the screwdriver, gloves and the patience to level the washer first
  • Not the pick for gas dryers in an unstable setup

Made for: anyone stacking a 27-inch LG or Samsung front-load pair who wants metal brackets rather than straps.

Double-check first: your washer’s width — a compact 24-inch cabinet needs a different kit entirely.

Samsung Specialist

2. Lifetime Appliance SKK-8K Stacking Kit

SKK-8K ReplacementReturn Guarantee

A Samsung 27-inch replacement kit that does the job — provided you check your screw situation first.

This one exists for a narrow reason: your Samsung 27-inch front-load pair needs the SKK-8K part number and you would rather not pay OEM pricing. Lifetime Appliance sells it as a direct replacement, sized 27 inches to match the Samsung cabinet. The kit’s own material spec is not listed, but the maker states it uses materials meant to meet or exceed the original manufacturer’s spec.

The recurring gripe here is hardware, and it is worth knowing about before the box arrives. Screws are the most-discussed topic in the reviews, and not in a good way — the included screws do not match what some Samsung models actually need. Functionality and fit both land as the positives, so the brackets themselves do the job once you solve the fasteners. The fix is simple enough: confirm the screw size on your washer’s rear panel before you start, and buy a matching set locally if the box comes up short. Fit and finish read as solid, which is what you want from a part that holds a dryer over your head.

On the money question, opinion splits. Some buyers feel the kit is priced right for a genuine-fit replacement; others think a bag of brackets should cost less. What tips it is the return guarantee — the seller invites a no-questions return if you are not satisfied, which takes most of the risk out of a hardware gamble. Also worth noting: this is a 27-inch kit, so a 29-inch cabinet from another brand is not going to work here.

Buy it when: your Samsung front-loader is 27 inches wide and you want the SKK-8K fit without the OEM markup.

Factor in the screws: budget a couple of extra minutes and possibly a quick hardware run, because the fastener set does not match every Samsung model.

The right call for: Samsung owners who have checked their rear panel screw size and want a direct replacement.

Look elsewhere if: you are stacking a non-Samsung 27-inch pair or you want a guaranteed screw match from the start.

Budget Samsung Fit

3. Beaquicy SKK-7A / SKK8K Stacking Kit for Samsung 27-Inch

Replaces SKK-7A, SK-5A, SKK-8KMetal and Plastic Build

Twelve screws, sixteen screws and two iron brackets — a full parts kit that lives or dies on your exact model.

Here is the number that jumps out: this kit ships with 2 iron brackets, 2 stacking support guides, 12 screws of one type and 16 of another. That is a generous hardware load, and it is clearly aimed at covering several Samsung variants — it replaces SKK-7A, SK-5A, SK-5AXAA and SKK-8K. The brackets are metal and plastic, and the maker states the fit meets or exceeds the original manufacturer’s specs.

The box measures 19.3 x 6.8 x 2.5 inches versus the KSTK1’s 27.75 x 3.2 x 2 inches. You only need a screwdriver and a pair of gloves, and the maker’s own guide puts installation at roughly 10-15 minutes. An instruction sheet is in the box and a video walkthrough is available if you want to watch the steps first.

Now the honest part, because this is where the kit asks something of you. Compatibility and fit are the two loudest complaints in the reviews — multiple Samsung 27-inch owners find the bracket holes and dryer runners do not align with their specific model. Beaquicy’s own note reinforces that this should be fitted by two experienced people, since the dryer’s weight and mounting height make a solo attempt risky. If you have a common Samsung 27-inch cabinet, it can go smoothly; if yours is an odd variant, expect some drilling. Study the model photos closely before you commit.

Suits you if: you have a mainstream Samsung 27-inch pair and you want the most affordable full bracket kit on the list.

Walk away if: your Samsung model number is not one you can match against the listing photos, because the fit complaints cluster exactly there.

No-Drill Option

4. Kiss Core Universal Washer Dryer Stacking Kit W600

Fits 24 to 29 InchesRatchet Strap Mount

No tools, no screws into your appliance — a strap-based kit for the renter crowd.

Kit shopping normally starts with a tape measure and ends with a specific part number. This one flips that. The Kiss Core W600 is sized for washers and dryers from 24 to 29 inches wide, with a 29 x 29 inch footprint and a stacking height of 0.43 inches. You drop it between the machines, adjust, and cinch it down with the included ratchet strap. Four non-slip mats go under the feet so the stack stays put.

The compatibility claim is the widest in this list. Kiss Core states it fits all common Samsung, LG and GE models, plus Whirlpool, Frigidaire, Bosch, Maytag, Kenmore, Electrolux, Amana, Crosley and Admiral. Compare that to the Beaquicy SKK-7A, which is locked to Samsung 27-inch front-loaders — this is the pick for a household where the washer and dryer are not even the same brand.

What wins people over is how quickly it goes on: no tools, no drilling, and setup that takes minutes rather than an afternoon. Value lands well too, since you get a full kit with mats and strap in one purchase. The caveat is real, though — the strap itself draws negative feedback, with some buyers describing it as cheap, and the stability and durability read mixed overall. Plastic and steel rails held by a strap are simply not as rigid as bolted brackets. Treat the strap as the part that needs care: check the tension after each of the first few cycles.

For a rental where you cannot put screws into anything, this is a sensible answer. For a permanent install with a 27-inch LG pair, the KSTK1 above is the firmer connection. Be honest with yourself about which situation you are in.

Where It Shines

  • Covers 24 to 29 inches, so mixed-brand and awkward-width setups work
  • Zero tools and zero drilling — the strap does the securing
  • Comes with 4 non-slip mats to stop the feet from skating
  • Multi-brand compatibility list runs from Samsung and LG to Bosch and Kenmore

What You Trade Away

  • The strap is the weakest link — buyers describe it as cheap
  • Stability reads mixed rather than rock-solid
  • Not as rigid as a bolted bracket kit

Reach for this if: you rent, you cannot drill, or your washer and dryer are different brands.

Think twice if: you want a permanent, bolted-feel install on a matching 27-inch pair.

Fastest Setup

5. Kiss Core Universal Stacking Kit SL-LJJ for Washer and Dryer

Fix Belt InstallThickened Build

The kit that gets a washer and dryer stacked in the time it takes to empty the lint trap.

Two minutes. That is the setup time owners describe for the SL-LJJ, and it is the number that defines this pick. You get a fix belt and a thickened universal rail, place it between the two machines, adjust the fit and tension the belt. No screwdriver, no drilling, no instruction manual deciphering. The kit is a 29.92 x 29.92 inch footprint with an item weight of 3.98 pounds, which gives you a sense of the rail’s size when you unbox it.

The build is plastic and steel and the maker calls it thickened and sturdy, with a long service life in mind. Compatibility is broad — Whirlpool, GE, Samsung, LG, Frigidaire, Bosch, Maytag, Kenmore, Electrolux, Amana, Crosley and Admiral all appear on the list. That is essentially every major front-load cabinet you are likely to own, which is exactly the point of a universal kit.

Where this one earns its place is the sheer volume of satisfied use behind it. Functionality is the thing everyone raves about, and it is followed closely by how easy the install is — buyers describe the stack holding the machines securely in place and working across different brands. One owner credited it with saving a dryer purchase entirely. The honest trade-off: a belt-and-rail system is less rigid than screwed-in brackets, so if your laundry floor is not perfectly level, expect to re-check the tension periodically.

Why it earns a spot: universal fit plus a two-minute strap install, at a mid-range price for a kit that ships complete.

The catch to plan for: belt tension needs an occasional check, and it will not feel as immovable as a bolted bracket.

Pick this one if: you want the fastest possible install across a brand-agnostic washer and dryer pair.

Not your kit if: you want the bolt-down rigidity of a screwed bracket system.

GE 28-Inch Fit

6. GFA28KITN Stacking Kit

U.S. Patent D1,011,17216 Screws Included

The only kit here with a patent number on the box — and a model list long enough to remove the guesswork.

A 28-inch GE cabinet is its own width, and this kit is built for it and nothing else. The GFA28KITN carries issued U.S. Patent No. D1,011,172, a design patent covering the structural layout — the maker’s claim is that the design improves installation safety and long-term stability. Whether or not the patent sways you, the parts count does: 2 spacers, 4 metal brackets and 16 screws, plus installation instructions. The spacers are a durable PP plastic and the brackets are carbon steel with anti-rust paint, which the maker states is stronger and tougher than the OEM standard.

Here is the detail that saves the most returns. The listing names the exact GE models it fits — washer side includes GFW550, GFW650, GFW655, GFW850 and PFW950 series; dryer side includes GFD55, GFD65, GFD85 and PFD95 series. Run your model number against those lists and you either have a confident yes or a clear no. Compare that against a universal strap kit and the difference in ordering certainty is night and day. There is a 2 year manufacturer warranty behind it as well.

Buyers report it fitting GE pairs cleanly, with no wobble or shaking once the brackets are down — exactly the outcome you want from a bolted system. The one real limit: this is a 28-inch GE-specific part, so it is useless on a 27-inch LG or a 24-inch compact Whirlpool. Buy it only if your model number is on that list.

Best match for: GE front-load owners at 28 inches who want a named model list and a patent-backed bracket design.

Wrong kit for: every non-GE cabinet and every GE model outside the listed GFW and GFD ranges.

Genuine OEM

7. Whirlpool W10869845 Genuine OEM Dryer Stack Kit

Fits 24-Inch DryersIncludes 4 Leveling Feet

The compact-laundry answer: four leveling feet that grip the washer top and stop the slide.

Compact laundry spaces run on 24-inch machines, and this is the kit built for them. The W10869845 fits both standard and long vent 24-inch dryers, which matters if your vent run is longer than a typical closet install. It is genuine Whirlpool OEM, meaning the part is made for the appliance rather than adapted to it, and it replaces a long list of older numbers — W10298318RP, W10761316, 12774, 4502692, 52774, PS12069913 and W10298318 — so you can match an old part number to a current one.

The hardware set is what separates it from every bracket kit above. You get 2 hooked steel brackets, 4 leveling dryer feet, 2 plastic clips and 4 screws. The materials are alloy steel, plastic and stainless steel, and the fit is aimed at tight laundry spaces where freeing up floor matters most.

The thing everyone agrees on is that it works — it fits Whirlpool pairs securely and does the job it was made for. The mixed note is on value, and it is a fair one to raise: genuine OEM parts carry a premium, and some buyers feel a bag of brackets and feet should cost less. If you want the exact part Whirlpool specifies for your 24-inch dryer, that premium is the price of certainty. If you have a 27-inch cabinet, this kit is the wrong width entirely, so check before ordering.

Reasons It Makes The List

  • Genuine Whirlpool OEM part, engineered for the appliance rather than adapted
  • Fits both standard and long vent 24-inch dryers
  • 4 leveling dryer feet grip the washer top and stop the dryer sliding
  • Replaces W10298318RP, W10761316, 12774, 4502692, 52774, PS12069913 and W10298318

The Honest Downsides

  • OEM pricing — value reads mixed among buyers
  • Locked to 24-inch dryers, so it will not fit 27, 28 or 29-inch cabinets
  • Complete install kit, but you still supply the screwdriver

The one to grab: if you run a 24-inch Whirlpool pair and want the exact OEM part with the feet included.

Keep looking: if your cabinet is 27 inches or wider — this kit is a compact-only fit.

Know the Specs

Stated width fit (in inches)

The number that decides everything. A stacking kit is a matched pair of brackets sized to your washer’s top panel, so a 27-inch kit will not bolt onto a 28-inch GE cabinet. Measure the top panel’s width with a tape measure and match it to the kit’s stated size. Kits labeled universal often cover a range — the Kiss Core W600 lists 24 to 29 inches — while OEM kits name a single width and stick to it.

Mount style: brackets versus straps

Bracket kits screw into the back of the washer and trap the dryer’s feet in a stopper or spacer. They take longer, need a screwdriver, and they hold with the most rigidity. Strap kits use a plastic-and-steel rail plus a ratchet strap or fix belt cinched around both machines. They install in minutes with no tools, which suits renters, but they give a little more under load.

Included hardware and screws

The included-parts list is your early warning system. A kit that ships 16 screws and names the exact appliance models it fits removes most of the risk. A kit with a short parts list and no model numbers leaves you to find out at install time. If your model is not named, contact the seller before ordering.

Leveling dryer feet

Rubber or plastic feet under the dryer lift it slightly and grip the washer’s top, which is why a stack with feet slides less than one without. The Whirlpool W10869845 ships four. If your kit omits them, check whether your dryer’s own adjustable feet can do the same job.

Common Questions

Can I stack a dryer on top of any washing machine?
No. The kit has to match both the washer’s width and the cabinet’s screw-hole layout. A 27-inch kit is built for 27-inch front-loaders, and a 24-inch compact like the Whirlpool W10869845 setup is a different width entirely. Measure your washer’s top panel and check the model list before ordering.
Can I stack a washer on top of a dryer instead?
Not with these kits. Every pick in this list is designed to hold the dryer on top of the washer — that is the direction the brackets and stoppers are engineered for. The dryer’s weight, vent routing and drum design all assume it sits up top.
What is the difference between a bracket kit and a strap kit?
A bracket kit like the KSTK1 or GFA28KITN screws metal brackets into the back of the washer and traps the dryer’s feet in a stopper. A strap kit like the Kiss Core W600 or SL-LJJ uses a plastic-and-steel rail plus a ratchet strap or fix belt, with no drilling at all. Bracket kits are more rigid; strap kits install in minutes and suit renters.
Do I need to level the washer before installing a stacking kit?
Yes. The KSTK1 instructions specifically call for the washer to sit firmly on a stable, levelled floor before you lay the kit on its top panel. An unlevel washer tilts the whole stack, which is exactly what makes a dryer shift or vibrate in a strap-based kit.
Why do some kits include leveling dryer feet?
The feet raise the dryer slightly into the bracket’s stopper and grip the washer’s top surface, which stops it sliding. The Whirlpool W10869845 ships four of them. A stack with proper feet moves less than one that just sits flat.
How long does installation take?
A bracket kit takes longer than a strap kit. Beaquicy puts the SKK-7A at roughly 10-15 minutes with a screwdriver and a pair of gloves. The Kiss Core SL-LJJ owners describe setting up in about two minutes because the fix belt needs no tools. Add time if you need to hunt for compatible screws.
Is it safe to install a stacking kit alone?
Beaquicy’s own instructions for the SKK-7A say installation should be done by two or more experienced people, because the dryer’s weight and mounting height make a solo lift risky. Getting a second pair of hands is the sensible call on any bracket kit, not just this one.
Do universal stacking kits really fit every brand?
Universal kits cover a width range and a broad brand list rather than a single exact model. The Kiss Core W600 spans 24 to 29 inches and names Samsung, LG, GE, Whirlpool, Frigidaire, Bosch, Maytag, Kenmore, Electrolux, Amana, Crosley and Admiral. That is wide, but it is still a strap-based fit, so it will not be as rigid as a bolted OEM bracket.
What should I do if the screws in my kit do not fit my washer?
Check your washer’s rear panel screw size before you start, and if the included set does not match, buy the correct size locally. This is a known snag on replacement kits, so it pays to have the right fasteners on hand rather than discovering the mismatch halfway through the install.
Does a stacking kit add height to my laundry setup?
Barely. The Kiss Core W600 lists a stacking height of 0.43 inches, which is the rail thickness sitting between the two machines. Every kit here is a thin bracket or rail system, not a platform, so the extra height is minimal compared with the dryer itself.

The Bottom Line

The winner in this washer dryer stacking kit roundup is the KSTK1 because it pairs chrome-coated stainless steel with a complete bolt-on hardware set and 10 years of after-sales cover — exactly what you want holding a dryer over your head in a damp laundry room. If your Samsung 27-inch pair needs the exact replacement part and you have checked the screw sizes, the Lifetime Appliance SKK-8K is the one to grab. And if you rent, or your washer and dryer are different brands, the Kiss Core W600 universal kit gets you stacked in minutes with no drilling at all. Measure your washer’s width before anything else — that single number narrows this whole list down to one or two real contenders.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top