Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your washer won’t spin, the door stays shut with a load inside, or the lid just clicks and gives up — and the fix is usually one small lock assembly. The trick is buying the right one, because these parts are machine-specific and a wrong match wastes a week. Below are the nine locks and switches that actually fit the machines they claim to fit, sorted by what they solve.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You’ll see which lock covers the widest range of brands, which one comes as a full kit so you replace the striker and bezel at the same time, and where each part tends to fall short. Read on for the washer door lock that ends the guessing game.
Top Picks



How To Choose The Best Washer Door Lock
Most lock returns trace back to one avoidable mistake at checkout. The biggest is ordering by washer brand instead of by part number — a Whirlpool and a Samsung front-loader can use a lock that cross-references to the same digits, and a GE top-loader uses a completely different switch shape. Match the part number, not the logo on the machine.
Match the part number, not the badge on the lid
Open the door, find the sticker inside the frame or on the back panel, and write down the full model string. Then compare that string against the compatibility list on the listing. A lock that lists your exact model is worth ten that only say “fits most.” This is the difference between a ten-minute job and a return.
Lid lock or door lock — they are not the same part
A top-load washer uses a lid lock: a small switch that stops the lid lifting mid-cycle, and it usually sits under the top panel. A front-load washer uses a door lock assembly: a motorised latch that physically holds the door shut through the wash and spin. Buy the wrong one and it will not mount, no matter how close the part number looks.
Check the electrical rating before you click buy
Lock assemblies carry a voltage and frequency rating, and the front-load units here are specified for 120V and either 60Hz or 50/60Hz. A US machine runs on 120V, so a lock rated that way is the correct match for a North American outlet. A mismatched rating is a dead part on arrival, not an install problem.
Decide if you want the bare lock or the full kit
Some listings ship the lock alone. Others bundle the striker — the small metal tab the latch grabs — and the bezel — the plastic trim around the latch. If your striker is worn or your bezel is cracked, the kit saves you a second order and a second wait. If only the lock has failed, the bare part is the cheaper route.
Side-by-Side Comparison
| Model | Best For | Type | Voltage | Brands Covered | Amazon |
|---|---|---|---|---|---|
| Whirlpool W10810403★ Best Overall | Genuine OEM confidence | Lid lock | — | Whirlpool, Kenmore, Maytag, Crosley | Amazon |
| WH01X27954 3-Pack KitBest Kit | Full GE top-load rebuild | Lid lock kit | — | GE, Hotpoint | Amazon |
| EBF61315802 by TOMOONError-Code Fix | LG front-load error codes | Door lock | 120V | LG, Kenmore 796-series | Amazon |
| DC64-00519B by Beaquicy | Widest brand crossover | Door lock | 120V | Samsung, Maytag, KitchenAid, Kenmore, Whirlpool | Amazon |
| WP8182634 by TOMOON | Whirlpool front-load swaps | Door lock | — | Whirlpool, Samsung, Maytag, Kenmore | Amazon |
| WH44X10288 | GE and Kenmore top-loaders | Lid lock | — | GE, Kenmore | Amazon |
| 131763256 Frigidaire Kit | Frigidaire Affinity latch repair | Door latch kit | 16 A contact rating | Frigidaire, Kenmore, Electrolux, White-Westinghouse, Gibson, Crosley | Amazon |
| EBF61674802 by OEM Mania | Long wire harness reach | Lid lock | — | LG, Kenmore | Amazon |
| Electrolux 134629900 | Genuine Electrolux replacement | Door lock | — | Electrolux, Frigidaire | Amazon |
Detailed Reviews
1. Whirlpool W10810403 Lock
Our pick — 4.5+★ from 600+ verified ratings; the strongest balance of quality and price.
A factory Whirlpool part that drops straight into four brands without a single adapter.
If your lid has stopped locking and you want the exact part that came out of the factory, this is it. The W10810403 is a genuine OEM replacement — meaning Whirlpool itself made it, not a third-party copier — and it carries the model number W10810403 on the part so you can verify the match before you unbolt anything. It’s built for Whirlpool, Kenmore, Maytag and Crosley machines, which covers a huge slice of the top-load washers sold in North America.
The installation story is what wins people over. This is a DIY job with a screwdriver and about twenty minutes of your evening, and the lock is designed to slot into the existing mounting without modification. No special tools, no wiring harness splicing, no service call. Owners consistently describe it as exactly the part they needed, and the crowd backing that up is real — 4.5+ stars across 600+ ratings makes it the highest-scoring pick on this list.
The catch is honest and worth knowing: the locking tab itself is the weak point, and a small number of these have snapped in use. That’s a durability question, not a fit question — the part mounts and functions correctly, but it is a plastic-and-metal assembly doing a mechanical job every single cycle. Close the lid gently rather than slamming it, and this OEM lock outlasts the aftermarket picks here.
What earns it the top spot
- Genuine OEM part made by Whirlpool in the United States
- Fits Whirlpool, Kenmore, Maytag and Crosley top-loaders
- Around a 20-minute install with basic hand tools
- Highest rating of any lock in this roundup
Where it asks for care
- The locking tab is the part that can snap under force
- Costs more than the aftermarket cross-references
- Only covers the brands listed — check your model string first
Buy this one if: you own a Whirlpool-family top-loader and want the factory part with zero compatibility doubt.
Think twice if: your machine is a GE, LG, Samsung or Frigidaire — this lock is not built for those.
2. WH01X27954 Washer Lid Lock Switch 3-Pack Kit
Three parts in one bag, so the lock, the striker and the bezel all get replaced together.
Most lock listings sell you the switch and leave you to discover your striker is worn or your bezel is cracked halfway through the job. This one doesn’t. The package contains the WH01X27954 lid lock switch itself, the WH02X24399 striker (the metal tab the latch grabs onto) and the WH01X24381 bezel (the plastic trim that surrounds the latch opening) — all three in a single order.
It’s aimed squarely at GE and Hotpoint top-load washers, and the compatibility list is unusually thorough for an aftermarket part. You’ll find GTW460ASJ5WW, GTW335ASN1WW, GTW220ACK2WW and a long run of the HTW240 and HTW200 families spelled out by full model string. The maker also lists the cross-reference numbers each piece replaces, so you can match against your old part directly if the sticker on your machine is faded.
Two things to plan around. First, the kit measures 4.06 x 3.98 x 1.73 inches packed — compact enough to post cheaply, but it also tells you these are small components, so keep track of the screws. Second, durability is the split opinion here: the lock works when it works, but a run of buyers have had theirs fail earlier than expected. For a repair at this level it’s still the most complete package on the list, and installation is a 10-minute job with no special tools.
Why the kit wins: replacing a lid lock without replacing a worn striker is how people end up doing the job twice. Buying all three pieces at once removes that risk entirely, and the compatibility list covering the GTW and HTW series by full model number makes the match easy to confirm.
The honest trade-off: this is a budget-tier aftermarket kit, and the lifespan of the switch is the thing buyers are divided on. Buy it if you want the switch, striker and bezel in one order; skip it if you want the longest-lived single switch.
Reach for this if: you have a GE or Hotpoint top-loader with a lid that won’t lock and you’d rather swap the whole assembly than diagnose which piece failed.
Look elsewhere if: your machine is a front-loader — this is a top-load lid kit only.
3. EBF61315802 Washer Door Lock Switch by TOMOON
The part that clears a DE1 or DE2 code on an LG front-loader without a technician visit.
If your LG or Kenmore 796-series front-loader throws a DE1 or DE2 error, refuses to start, or shuts itself down mid-cycle, the door lock assembly is the usual suspect. This EBF61315802 replacement is specified at 120 volts and 60 Hz — the standard North American wall supply — and its whole job is to hold the door shut through the wash and spin, then release it. When it stops doing that, the machine’s control board refuses to run a cycle.
The compatibility coverage is broad for a front-load part. The list names WM3770HVA, WM4070HVA, WM4270HVA, WM4370HWA, WM5000HVA, WM8000HVA, WM8100HVA and the Kenmore 79641303610 and 79641982410 machines, plus GCWW1069CS7 and GCWW1069CD7. It also cross-references a stack of old part numbers — EBF62534401, 2667085, AP5672154, PS7792232 — which matters when you’re holding a twenty-year-old sticker you can barely read.
Installation needs a Phillips screwdriver and a pair of sharp-nosed pliers, and the maker is direct about the safety step: unplug the washer and put on gloves before you start. What buyers respond to most is simply that it works — the lock restores normal operation and the appearance matches the original part. TOMOON also backs it with a 2-year manufacturer warranty, which is longer cover than most of the aftermarket locks here offer. Expect roughly a twenty-minute repair, and expect the door to click and hold like it did when the machine was new.
The case for the LG fix
- Specified 120V at 60 Hz for standard US supply
- Cross-references EBF62534401, 2667085, AP5672154 and PS7792232
- Covers a long list of LG and Kenmore 796-series model strings
- Backed by a 2-year manufacturer warranty
Small print worth reading
- Some buyers report the lock doesn’t last as long as the original
- Compatibility is mixed across the model list — confirm your exact string
- LG and Kenmore only; no Samsung or Whirlpool coverage
This is your part if: an LG or Kenmore 796-series front-loader is showing DE1, DE2, or a door that won’t lock or release.
Worth flagging: lifespan is the split opinion, so if your machine eats locks, keep the spare part number handy.
4. DC64-00519B Washer Door Lock Switch Assembly by Beaquicy
One lock assembly that crosses Samsung, Maytag, KitchenAid, Kenmore and Whirlpool machines.
Few parts in this category pull off a genuine brand crossover, and this one does. The DC64-00519B replaces parts in Samsung, Maytag, KitchenAid, Kenmore and Whirlpool washers, and the reference list is long — DC97-16899A, 2313922, AP4205355, PS4210737, 2071402, WP8182634 and 8182634 among them. If you have no idea which badge actually built your washer, this is the lock that has the best odds of matching.
The build is ABS plastic plus metal, rated at 120 volts and 50/60 Hz. The maker’s claim is that the seams are better treated than the older design, which matters on a front-loader because a badly sealed lock is a leak path. It also responds faster to lock and open up commands, so you’re not standing there waiting for the door to release after the cycle ends.
What this part fixes is a surprisingly useful checklist: a noisy machine, a door lock that won’t open up, a washer that leaks, a door that pops open when the washer starts, and clothes coming out wetter than usual. Installation is a screwdriver job — kill the power and water, put on gloves, unscrew the old unit, disconnect the wires, and fit the new one. The one thing to get right is seating the wire connector firmly; a loose connection is the most common reason a fresh lock reads as dead. The maker covers it with a 365-day return and exchange window, which takes most of the risk out of the buy.
Where the value sits: the cross-brand coverage. Buyers notice the reliable locking first, and a five-minute swap that spares a professional repair bill is the point of buying the part yourself. The 10.31 x 4.88 x 1.89-inch package is bulky for a small part, but that’s a shipping detail, not a fitting one.
What to watch: a handful of these have given out early — one reportedly inside 10 weeks, another after only a handful of uses. It’s not the pattern across the board, but it’s a real reason to keep your receipt inside the warranty window.
Best for: front-loaders where you’re unsure of the original brand, or where the old part number cross-references to DC64-00519B.
Not for: top-load washers — this is a front-load door lock, and it won’t mount on a lid.
5. WP8182634 461970200692 Washer Door Lock Switch
Built to swap straight into Whirlpool and Samsung front-loaders with a screwdriver and gloves.
This is a direct-fit replacement for the WP8182634 and 461970200692 part numbers, and it also stands in for 8182634, DC64-00519B, DC64-00519D, WP8182634VP, 8181700, 34001265, 1094190, AP6011817 and PS11745016. That reference list is the whole reason to buy it: you can match your old lock against ten different numbers and know before it ships whether you have the right part.
It’s aimed at Whirlpool and Samsung front-load washers, with compatibility across Maytag and Kenmore too. The model list names 7MGHW9100MW0, 7MGHW9150PW0 through PW2, 7MGHW9400PW0 through PW2, GHW9200L, and the GHW9460 family across PL2, PL3 and PL4 variants. The unit is powder-coated and weighs 3.53 ounces, which tells you it’s a compact assembly rather than a bulky control module.
What buyers rate highest is how simple it goes in — roughly a fifteen-minute job with a screwdriver and work gloves, and the fit lands exactly where the old lock sat. The part’s job is to hold the door through the wash and spin and prevent mid-cycle interruptions, and it does that without fuss. The genuine caveats: some units have failed around the ten-month mark, and a few orders arrived missing components. Neither is the norm, but both are worth a quick check of the box before you start unscrewing anything.
The short version: a drop-in Whirlpool-family door lock with a wide cross-reference list and a fitting time measured in minutes, not hours. It restores the door interlock that keeps the door shut through the spin cycle, which is why the washer won’t run when it fails.
Honest limit: it’s a plastic-bodied aftermarket part, and a small share of them give out inside a year. Inspect the contents on arrival, fit it carefully, and it earns its place.
Pick it when: your front-loader’s old lock carries WP8182634, 461970200692, or any of the ten cross-referenced numbers.
Pass it by if: you’re repairing a GE, LG, Frigidaire or Electrolux machine — the fit list doesn’t reach those.
6. OEM Washer Lid Lock WH44X10288
A top-load lid lock listed against dozens of GE and Kenmore model strings by name.
Where most listings give you a vague “fits many models,” this one spells out the machines. On the GE side you get the GTUN275, GTUP240, GTUP270, GUAN275 and GUAP240 and GUAP270 families across their EM and GM variants. On the Kenmore side there’s a long run of 266153 and 267153 numbers plus the 363615 and 363715 series. If your sticker matches any of those strings, you have your answer before you order.
You get a drop-in replacement, not a project: the maker claims it’s the exact same OEM switch (original equipment manufacturer — the part the factory fits) with the same fit, form and function. Its job is to stop the lid lifting during the wash and spin cycles. At 4.2 ounces in a 4.33 x 4.25 x 3.66-inch package, there’s nothing bulky to wrestle with at the machine.
What buyers talk about is simply that it works: the lid locks, the washer runs, and the install takes minutes. Buyers also flag the saving, since a service call on a lid lock costs far more than this part. The honest note is that this is a third-party seller’s part carrying the OEM number, not a factory-boxed GE component — so verify your model string against the list rather than assuming the badge is enough. If it matches, it slots in and gets your machine spinning again the same evening.
Why it’s on the shortlist
- Compatibility list names full GE and Kenmore model strings, not vague ranges
- Built to the same fit, form and function as the OEM switch
- Minutes to install — no special tools needed
- Compact 4.2-ounce part, easy to handle in a tight cabinet
What to keep in mind
- Sold as a third-party OEM-numbered part, not factory-boxed
- Only covers GE and Kenmore top-loaders
- Long model list means you must read it carefully to find yours
The right call for: GE or Kenmore top-load owners whose model appears verbatim on the compatibility list.
The wrong call for: anyone with a front-loader, or a GE model string not named on that list.
7. 131763256 Frigidaire Affinity Washer Door Latch Lock Kit
Five pieces in one box — the latch plus two strikers and two spares, so a second failure is covered.
This kit takes a different approach to the same problem. Instead of shipping one latch, it includes the 131763256 latch lock plus two 131763310 strikers and two 131763302 strikers. That’s the part that most often wears alongside the latch, and having a pair of each means a cracked striker six months from now doesn’t send you back to the listing.
The coverage runs wide across the Electrolux family: Frigidaire Affinity models including FAFW4011LW0, GLTF2940FS1, FAFW3511KW0, ATF6000FS1 and FAFW3577KN1, plus Kenmore, White-Westinghouse, Crosley, Gibson and Electrolux machines. Electrically it’s rated to 16 A with a normally-open contact type and a plug-in connector — this is a mechanical switch, so the current figure tells you what load the contacts are built to carry.
What buyers value is the reliability of the repair and the money it saves compared with a service visit or a replacement machine. The trade-off is the latch action itself: a run of these don’t grab cleanly, and a door that won’t latch is exactly the problem you bought the part to fix. Check that the striker sits square in the bezel opening and that the door clicks firmly before you button the machine back up. The maker’s own advice is to watch a video walkthrough first, which is sound — the diagnostics are simple, but knowing which screws to pull saves time.
What it solves: a complete Affinity latch repair in one order, with spares for the striker that wears out alongside it. Cross-referencing a stack of old numbers — 1317632, 131763202, 131763245, 4547033, AP6285657, PS2367737 — makes it easy to confirm against a faded sticker.
The caveat to hold onto: latch engagement is the weak link, so fit it carefully and test the door catches before closing the panel back up.
Made for: Frigidaire Affinity, Kenmore or Electrolux front-loaders that need the latch and the striker replaced together.
Look past it if: your machine is a Whirlpool, GE, LG or Samsung — the fit list is the Electrolux family only.
8. OEM Mania EBF61674802 Washer Lid Lock Switch
A lid lock with a 49.2-inch wire harness, so you’re not fighting a short lead in a tight cabinet.
Harness length is the spec that separates this one from the pack. The switch assembly ships with roughly 49.2 inches — that’s 125 cm — of wiring attached, which gives you real slack to route the lead through the machine’s frame and back to the connector. On a top-loader where the lock sits deep under the top panel, that extra reach is the difference between a tidy install and a stretched, pinched wire.
It replaces EBF61674802 and also cross-references EBF60665201, PS8751171 and AP5785599, fitting LG and Kenmore washers. The listing is upfront that this is an aftermarket part, not an LG component, and that OEM Mania isn’t affiliated with LG Electronics — worth knowing so you’re not expecting a factory box.
The problems it addresses are the familiar ones: a washer that won’t start, a lid lock error, or a lid that won’t latch properly. Buyers who’ve fitted it say the locking mechanism does its job and the fit lands where it should, with the LG WT7200 and Kenmore Elite machines both coming up as successful matches. It’s a one-piece assembly — you get the switch with the harness, nothing else — so if your bezel is cracked, order that separately. The advice that matters most is the seller’s own: hit Ctrl+F on the compatibility list before you buy, because this part is only useful on an exact model match.
The real advantage
- 49.2-inch (125 cm) wire harness gives generous routing slack
- Cross-references EBF60665201, PS8751171 and AP5785599
- Resolves lid lock errors and failure-to-latch issues
- Single assembly — lock and harness arrive as one unit
Fair warnings
- Aftermarket part, explicitly not affiliated with LG
- Ships the switch only — no bezel or striker included
- LG and Kenmore coverage only
Choose it for: an LG or Kenmore top-loader where the old harness was too short to route comfortably.
Skip the rush if: you also need a bezel or striker — this box holds the switch and wiring alone.
9. GENUINE Electrolux 134629900 Door Lock
The factory Electrolux lock, for the owner who won’t put an aftermarket part in a premium machine.
This is the genuine article — a factory Electrolux replacement, part number 134629900, sold under the Frigidaire group’s own branding. If yours is a higher-end Electrolux or Frigidaire front-loader and you want the exact component the machine was built with, this is the only lock in this roundup that makes that promise without a cross-reference caveat.
It’s a compact unit — 6 x 4 x 1.75 inches on the item dimensions and 5.6 ounces in weight — so it seats into the door frame rather than dominating the repair. The listing carries a FULL 30 DAY WARRANTY, which is a shorter cover than the aftermarket options offer, so read that as a confidence statement about the part rather than a long-term safety net.
The repair itself is the simplest kind: the lock works like the OEM unit it replaces, and it fits without modification. For a premium front-loader that’s the whole appeal — no drilling, no adapters, no wondering whether the fit will be close enough. The saving is the second draw: fitting this yourself costs far less than replacing a working machine. The honest sizing is that this is the most expensive part in the roundup by a clear margin, and it only fits the Electrolux and Frigidaire family. If that’s your machine and you want it fixed once, with the factory part, the cost is the trade you’re making.
The reason to pay more: genuine factory construction and a fit that needs no adaptation. For an Electrolux or Frigidaire front-loader, that removes every compatibility question from the job.
The honest math: shorter warranty cover than the aftermarket locks and the highest cost on the list. Buy it for the certainty, not for the price.
Right for you if: you own an Electrolux or Frigidaire front-loader and want the factory part, not an equivalent.
Not your part if: your washer isn’t in the Electrolux family, or you want a longer warranty window.
Know the Specs
Part number and cross-reference list
The part number is the digits stamped on your old lock, and the cross-reference list is the set of other numbers that same part can stand in for. A lock listing ten cross-references gives you ten chances to match a faded sticker. This is the single spec that decides whether the part is worth ordering — far more than the brand name on the machine.
Voltage and frequency rating
Lock assemblies for front-loaders are rated for a supply voltage and frequency — the front-load units here are specified at 120 volts and either 60 Hz or 50/60 Hz. A US wall outlet supplies 120 volts, so a part rated that way is the correct match for a North American machine. Ordering a part with a different rating means it won’t run, no matter how well it fits.
Lid lock versus door lock
A lid lock is a small switch on a top-load washer that stops the lid lifting during the wash and spin. A door lock is a motorised latch on a front-loader that physically holds the door shut through the same cycles. They mount differently, wire differently, and are not interchangeable — buying the wrong type is the most common reason a repair stalls.
What the striker and bezel do
Two small parts wear out alongside the lock. The striker is the small tab the latch grabs onto, and the bezel is the trim that surrounds the latch opening. A kit that bundles all three pieces saves you a second order when the old striker is rounded or the bezel is cracked — so a slightly higher kit cost often works out cheaper than buying the pieces one at a time.
Common Questions
How do I find the right washer door lock for my machine?
What is the difference between a lid lock and a door lock on a washer?
My washer shows a DE1 or DE2 code — is the door lock the problem?
Do I need the striker and bezel as well as the lock itself?
Can I replace a washer door lock myself without a technician?
Why did my new door lock stop working after a short time?
Will a genuine OEM lock last longer than an aftermarket one?
Do these locks work on both top-load and front-load washers?
What voltage does a washer door lock need?
Is it cheaper to replace the lock or buy a new washer?
The Bottom Line
For most people, the washer door lock that ends the search is the Whirlpool W10810403. It’s a genuine factory part covering Whirlpool, Kenmore, Maytag and Crosley top-loaders, it installs in about twenty minutes with a screwdriver, and it holds the highest rating in this roundup. If your machine is a front-loader and you’re unsure which brand fits, reach for the DC64-00519B by Beaquicy — its cross-brand coverage and 365-day warranty window cover more machines. For a complete GE lid repair in a single order, the WH01X27954 three-piece kit bundles the switch, striker and bezel so the job doesn’t stall halfway. One practical nudge: confirm your exact model string against the compatibility list before you click buy — a lock only earns its keep on the machine it was built for.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





