Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Before you scroll: this list uses flexible, human-like matching for a stacking kit designed to mount a dryer on top of a washer. Not every pick is the exact model number you typed in — the nearest same-type bracket in the right size does the same job. Now the short answer you came for. If you own an LG 27-inch pair, the KSTK1 is the one to order and the one you’ll stop worrying about. Everyone else should match their appliance’s width and brand first, then worry about the bracket.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
A steel bracket you fasten to the washer top and screw into the dryer base, it is the small part that stops a stacked pair from walking across the floor. Fit beats brand here, which is why every pick below is matched to a washer width from 24 to 29 inches. Choose a washer and dryer stacking kit that matches your exact appliance width and brand before you screw anything down.
Top Picks


How To Choose The Right Washer and Dryer Stacking Kit
The mistake almost every buyer makes is ordering by brand name instead of by width and access type. A stacking kit is a bracket, a strap, or a clamp system that physically holds the dryer base to the washer top. If the width is wrong, it will not sit square, and the machine will rock or vibrate. So start by measuring the top plate of your washer left to right, not diagonal, and write the number down.
Measure the width before anything else
Most full-size front loaders are 27 inches wide, which is why so many kits in this list are 27-inch models. Compact and apartment units can be 24 inches, GE front loaders often run 28 inches, and some wider machines sit at 29 inches. The Whirlpool W10869845 is built specifically for 24-inch dryers, both standard and long vent, so it will not suit a 27-inch pair. If your washer is a different size to the kit, the brackets will bolt on but the dryer will not land centered.
Bracket kits versus universal strap kits
A bracket kit uses solid metal side supports screwed into the washer top and the dryer base. It tends to hold tighter and is the better choice when both machines share a brand and a bolt pattern. A universal kit uses non-slip mats plus a ratchet strap or a fix belt across both units. That style suits a mixed-brand pair where the bolt holes do not line up, and it usually needs no drilling at all. Know which one your machines can accept before you order.
Front control versus top load
Stacking only works with front-load washers and front-load dryers. A top-load washer has a lid you need to open, so a dryer sitting on top blocks it. Check the access type of both machines. The Whirlpool W10869845 is listed with top-load access and is designed for specific compact dryer configurations, so read your model numbers against the listing before you commit. If either machine opens from the top, no stacking kit on this list is the answer.
Side-by-Side Comparison
| Model | Best For | Size | Material | Install Style | Amazon |
|---|---|---|---|---|---|
| KSTK1 27-inch LG Stacking Kit★ Best Overall | Most LG pairs | 27 in | Stainless steel, chrome finish | Bracket and screws | Amazon |
| 27 Inch Front Load Bracket (KSTK1)Budget LG Fit | Budget LG fit | 27 in | Steel, chrome color | Bracket and screws | Amazon |
| Beaquicy SKK-7A / SKK-8K | Samsung 27-inch pairs | 27 in | Metal and plastic | Bracket and screws | Amazon |
| Kiss Core Universal W600 | Mixed-brand pairs | 29 in | Plastic and steel | Ratchet strap, no tools | Amazon |
| Kiss Core Thickened SL-LJJ | Odd-size washers, 24 to 29 in | 24 to 29 in adjustable | Plastic and steel | Ratchet strap, no tools | Amazon |
| GFA28KITN GE 28-inch Kit | GE 28-inch front loaders | 28 in | Carbon steel and PP spacers | Bracket and screws | Amazon |
| Whirlpool W10869845 | 24-inch compact dryers | 24 in | Alloy steel, plastic, stainless steel | Bracket, clips and screws | Amazon |
Detailed Reviews
1. KSTK1 Washer Dryer Stacking Kit
Our pick — 4.5+★ from 800+ verified ratings; the strongest balance of quality and price.
The 27-inch bracket that turns two cramped machines into one tidy column.
If your washer and dryer are both LG and both 27 inches wide, this is the bracket that gets the least friction from owners. It is a solid stainless steel kit with a chrome coating, and the whole point is that it locks the dryer base down to the washer top so nothing shifts when the spin cycle ramps up. What wins people over is how boring the installation is — owners talk about the fit and the setup far more than anything else, and the recurring theme is that it simply works the way a bracket should. It holds 4.5+ stars across 800+ ratings, the highest of any kit here.
Here is the practical bit. The kit ships with 2 side brackets, 1 stopper bracket, 4 self-tapping screws and 1 stacking support guide, so you are not hunting for hardware halfway through. You place the washer on a level floor, set the guide and side supports on the top plate, tape them in place, then run the screws through the back of each support. That order matters — level first, brackets second. Buyers report a year of use with no rust or warping on the stainless steel brackets. The chrome coating is there to resist corrosion, not to be pretty.
The catch is width and brand. This is a 27-inch kit aimed at LG, Samsung and Whirlpool 27-inch front loaders, and it will not adapt to a 24-inch compact or a 29-inch machine. If your pair is a mixed brand with bolt holes that do not line up, a universal strap kit is the safer call. There is also the physical job itself: you are lifting a dryer, so plan for a second pair of hands and cut the power first, as the manufacturer’s own instructions say.
Where it earns the top spot
- Stainless steel with a chrome coating that resists rust, corrosion and warping
- 27-inch fit built for LG, Samsung and Whirlpool front loaders
- Complete hardware in the box: 2 side brackets, 1 stopper bracket, 4 screws, 1 support guide
- Backed by a 10-year after-sales guarantee from the manufacturer
What to plan around
- Locked to 27-inch machines, so compact and wide washers need a different kit
- You still have to lift and align the dryer yourself
Order this one if: you have a 27-inch LG pair and want the longest warranty on this list.
Measure first: a 24 or 29-inch washer will not take this kit, no matter how good the reviews read.
2. 27 Inch Washer Dryer Stacking Kit
Same 27-inch job as the top pick, for a little less out of pocket.
This is the value route to the same result: a compact chrome steel bracket that clears floor space by letting a 27-inch LG dryer sit on the washer. It weighs in at 4.14 pounds and comes as a 3-pack kit with the parts needed to stack the dryer on top of the washer. Installation is the same short routine — level the washer, mount the bracket, screw it down, and owners describe the process as quick and uncomplicated. Owners mention it fits LG 27-inch washers and dryers perfectly, which is exactly the match you want here.
Where it slips behind the KSTK1 above is what is in the bag. The most-discussed gripe with this listing is missing screws, and the fit and value ratings land as mixed rather than clean across the board. That does not mean the bracket is weak — the steel is the same high-quality chrome-plated stock and it holds. It means you should open the box and count the hardware before you disconnect anything. If a screw is short, the 30-day return policy takes the sting out of it.
The honest read: for a straight LG 27-inch swap this bracket does the structural work at an entry-level price, and the compact design keeps your laundry room looking unchanged.
Check the bag: hardware counts are the one thing to verify on arrival, so do it before installation day rather than during it.
Reach for it when: budget is the deciding factor and you already know your LG pair is 27 inches.
Spend up instead if: you would rather not gamble on a complete hardware pack and want the longer guarantee.
3. Beaquicy SKK-7A / SKK-8K Dryer Stacking Kit
The Samsung-fit kit that takes a screwdriver, gloves and about a quarter of an hour.
If your pair wears a Samsung badge, this is the replacement part to look at. It replaces SKK-7A, SK-5A, SK-5AXAA and SKK-8K, so you can match it to an original part number rather than guessing at width alone. The brackets are approximately 18.5 inches long, made from iron brackets and plastic guides, and the kit ships with 2 brackets, 2 stacking support guides, 12 screws of one size and 16 of another. Customers note it “takes about 10-15 minutes to complete the installation” — a realistic window if you have the dryer already lifted into place.
Here is the comparison that matters most in this whole list. Against the KSTK1, this kit’s box is 19.3 x 6.8 x 2.5 inches, while the KSTK1 measures 27.75 x 3.2 x 2 inches — a noticeably longer footprint in the packaging, which tells you the brackets are shaped differently even though both serve 27-inch machines. Neither is better built because of a box dimension; they are simply cut for different appliance brands. Match the part number to your machine, not the box size.
The real caveat is that compatibility is genuinely mixed. Some pairs go together cleanly, and others report it will not fit certain newer washer and dryer combos. The maker also states plainly that installation should be handled by 2 or more experienced people, since the weight and mounting height of a dryer make solo stacking risky, and that it should not be used with gas dryers in unstable conditions. Take that warning seriously. This is a bracket that rewards checking your exact model number against the listing first.
Why Samsung owners pick it: the part-number coverage is wide and the install tools are just a screwdriver and gloves.
Do this before ordering: confirm your washer and dryer are both 27-inch Samsung front loaders, because newer combos are where the fit reports turn mixed.
Best match for: a confirmed 27-inch Samsung front-load pair that needs an OEM-style replacement kit.
Think twice if: your machines are a recent combo that the listing does not explicitly name.
4. Kiss Core Upgrade Universal Washer Dryer Stacking Kit (W600)
For the pair where the brands do not match and the bolt holes do not line up.
Brackets only work when the holes agree. This kit sidesteps that whole problem. Instead of drilling into the dryer base, it lays four non-slip mats between the machines, sets the stacking pieces, and cinches a ratchet strap around both units. The parts list is simple: 1 ratchet strap, 4 non-slip mats, 4 stacking kit pieces and 4 stainless steel fittings. No tools. The universal sizing covers Samsung, LG, GE, Whirlpool, Frigidaire, Bosch, Maytag, Kenmore, Electrolux, Amana, Crosley and Admiral, which is why it is the pick for a mismatched set.
It is worth understanding the trade-off before you choose it. The functional side of this kit is what carries it — owners consistently report the strap-and-mat system holding the stack together and being straightforward to set up, and the plastic-and-steel construction is not going to tear up your appliances. But hold the stability picture honestly: some buyers find the strap approach feels less rigid than a bolted bracket. That is the nature of a universal fit. It will not bite into the machine the way a screw-down kit does, and that is both its advantage and its limit.
Size is the other thing. The product dimensions list as 29.72 x 29.72 x 2 inches, so this is aimed at full-width pairs, not compacts. If your washer is a 27-inch LG with a matching LG dryer, a bracket kit like the top pick gives you a more locked-in hold. If your dryer is a different maker to your washer and you cannot find a bracket that matches both, this is where universal kits earn their keep.
Where the value sits: mixed-brand pairs get a working solution without drilling or hunting for the right bolt pattern.
The honest limit: a strap is not a bolt, so expect a little more give than a dedicated bracket if you are sensitive to movement.
Pick this for: a mismatched washer and dryer where no single bracket fits both.
Go bracket instead if: both machines are the same brand and width, because a screw-down kit holds firmer.
5. Kiss Core Thickened Universal Stacking Kit
One adjustable kit that covers nearly every washer width in your house.
Most kits in this list lock to a single width. This one does not. It fits 24, 25, 26, 27, 28 and 29-inch washer and dryer pairs, up to 76 x 76 cm or 29 x 29 inches in width and depth, so a compact apartment unit and a full-size pair can both take it. The build is high-quality plastic and steel, described as thickened, and the hardware is a fix belt that cinches the two machines together. Reviewers point out it is genuinely quick to live with — shoppers say about 2 minutes of setup once the machines are in place, since the fix belt needs no tools.
This is also where the comparison with the other Kiss Core kit gets useful. The W600 above lists at 29.72 x 29.72 x 2 inches, while this one lists at 29.92 x 29.92 x 2 inches and adds adjustable sizing down to 24 inches. If your machines are outside the standard 27 to 29-inch range, the adjustable version is the one that will actually sit square. Owners praise the sturdiness and how firmly the belt holds the stack without a single screw.
The honest trade-off is the same one that comes with every strap kit: it works by tension, not by bolting into the appliance frame. That means it depends on a clean, level surface under both machines to perform at its best. Set the washer level first, mat the top plate, then tighten the belt evenly. Do that and the stack is stable. Skip it and no universal kit will save you.
Why the flexible fit matters
- Adjustable across 24, 25, 26, 27, 28 and 29-inch pairs
- No tools required — a fix belt and ratchet-style tension do the work
- Plastic and steel build that owners describe as sturdy and stable
- Works across Whirlpool, GE, Samsung, LG, Frigidaire and other brands
Where it asks more of you
- Belt tension depends on both machines sitting perfectly level
- Not a bolted bracket, so the hold feels different to a screw-down kit
Made for: anyone whose washer falls outside the standard 27-inch club.
Prepare for: a level check under both machines before you tension the belt, because that is where stability is won.
6. GFA28KITN Stacking Kit
A 28-inch special built for GE front loaders with a nameable patent behind it.
GE front loaders run 28 inches wide, not 27, which is why a standard kit will not sit centered on one. This bracket is cut for that width and is protected by issued U.S. Patent No. D1,011,172, covering the structural design the maker claims improves installation safety and stacking stability. The parts are serious: 2 spacers in durable PP material, 4 metal brackets in carbon steel with anti-rust paint, 16 screws and an instruction sheet. If your pair is a GE 28-inch front loader, this is the fit that matches without shimming.
What people notice after install is the quiet. Buyers report no wobbling or shaking once the stack is bolted down, and call the fit solid on GE appliances. The install is also a point in its favor — clear instructions, the same screwdriver-and-gloves routine as the bracket kits above. The maker rates the carbon steel brackets stronger and tougher than OEM standard, and the kit carries a 2-year manufacturer warranty. For a part that carries a dryer, that coverage is worth having.
The constraint is strict compatibility. The listing names specific GE models, so you need to check your washer and dryer against that list. It covers broad families like GFW550, GFW650, GFD65 and GFD85, but it will not adapt to a Samsung or LG pair, and the 28-inch width rules out your family’s 27-inch machine. If you are not sure, the model list in the listing is the deciding document, not the price tier.
The stability story: bolted carbon steel brackets with a 2-year warranty, built so a GE 28-inch dryer lands flat and stays flat.
Cross-check this: the model numbers named in the listing are the real gate — one wrong code and the bracket goes back.
Right for: a GE 28-inch front-load pair where a listed model number matches your machine.
Not for: 27-inch LG or Samsung setups, which need a 27-inch kit instead.
7. Whirlpool W10869845 Genuine OEM Dryer Stack Kit
The 24-inch OEM route for tight laundry closets and compact venting setups.
Compact laundry builds are their own world. This genuine OEM kit fits both standard and long vent 24-inch dryers, which is the size you meet in apartment closets and narrow alcoves. It is engineered by Whirlpool specifically for its appliances, so the bracket is shaped to the machine rather than adapted to it. The box contains 2 hooked steel brackets, 4 leveling dryer feet, 2 plastic clips and 4 screws — a full hardware set, plus the feet you need to level the dryer before it goes up on the washer.
It also solves the part-number puzzle. This one number replaces W10298318RP, W10761316, 12774, 4502692, 52774, PS12069913 and W10298318, so if you are staring at an old label on a broken kit, you can likely match this to it. Owners mention it working well with Whirlpool Duet pairs, with the stack sitting securely once the brackets and feet are in place. The functionality of the kit is what people talk about most, and it holds up quietly rather than drawing attention.
The caveat is the one buyers should size before ordering: this is a 24-inch compact kit at the top of the price range here, and some owners find the cost high for a part of this size. That is an honest fit call rather than a defect — if your dryer is a 24-inch compact and you want genuine OEM parts, this is the right one to order. If your machines are 27 or 29 inches, it is simply the wrong width and needs a different pick.
Why it earns its place: genuine OEM geometry for 24-inch dryers, with brackets, feet, clips and screws all in one box.
Weigh before buying: it is the specialist compact kit, so check your dryer width and vent type before you order rather than after.
The right call for: a 24-inch compact Whirlpool or compatible dryer, standard or long vent.
Look at the wider kits if: your appliance or your wallet is built around a 27 to 29-inch standard setup.
Know the Specs
Width match (24, 27, 28 or 29 inches)
Width is the spec that decides whether a kit works at all. The bracket has to sit square on the washer’s top plate and catch the dryer’s base at the factory mounting points. A 27-inch kit on a 28-inch GE washer leaves a gap the support cannot bridge. Measure across the top front edge of the washer, then buy to that number.
Bracket versus belt install
A bracket kit bolts through metal into the appliance frame, which is why so many owners describe the result as stable with no shaking. A belt or strap kit wraps around both machines and relies on tension and friction. Both hold a dryer, but the bolted version gives a firmer connection. Choose based on whether your machines share bolt patterns.
What is in the box
The included parts list tells you how much of the job is already solved. Brackets, screws, spacers and support guides mean you usually only supply a screwdriver and gloves. A kit with only a strap assumes your machines sit flat and level already. Count the hardware as soon as the box arrives, because a short-screwed pack is the most common snag across these listings.
Front-load only
Stacking assumes both machines open from the front. A top-load washer has a lid that needs clearance above it, which a stacked dryer eliminates. Before you buy a kit, confirm both units are front-load. This is the one spec mismatch no bracket, strap, spacer or screw can fix.
Common Questions
How do I know if a stacking kit will fit my washer and dryer?
Can I use a 29-inch universal kit on a 27-inch washer?
Do I need tools to install a stacking kit?
How long does installation take?
Can I stack a dryer on a top-load washer?
Is a universal strap kit as strong as a bolted bracket kit?
What if my kit arrives with missing screws?
Can I stack a dryer in a small apartment laundry closet?
Do I need a separate kit for a gas dryer?
Will stacking my dryer void the appliance warranty?
The Bottom Line
For most people, the washer and dryer stacking kit answer is the KSTK1 27-inch LG kit, because it covers the most common front-load width in stainless steel with the longest after-sales support window at 10 years. If your machines are a different brand and the bolt holes do not line up, grab the Kiss Core W600 universal kit and let the ratchet strap bridge the gap. And for a GE 28-inch pair, the GFA28KITN is the one to reach for, since it is the only pick here cut to that exact width.
Before you click anything, do the one thing that decides this purchase: measure the top of your washer. Every bracket or belt above is a good kit in the right size, and an expensive mistake in the wrong one. Match the width, confirm both machines are front-load, count the hardware when it lands, and the stack will hold for years.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




