Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Here is the short answer: the mount matters as much as the lock. A heavy U-lock carried loose on your frame knocks against the paint, slides down your seatpost mid-ride, and rattles until you tape it shut. A good mount grips the shackle without sway, releases the lock one-handed at the rack, and holds its clamp through months of road vibration. Below are seven brackets, carriers, and carriers-by-another-name, ranked so you can pick the one that fits your lock and your bike instead of guessing.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
What follows is a plain-English walk through fit ranges, mounting points, and materials. A U-lock that fights you back into its cradle every trip is a lock you stop carrying, so every pick below is judged on fit, hold, and one-handed release. Every pick below is chosen to help you settle on the best U-Lock Bike Mount for your own frame, commute, and shackle size.
Top Picks


How To Choose The Best U-Lock Bike Mount
The mount is a small part with an outsized job: hold several pounds of hardened steel in place while your bike takes every crack in the road. Get it wrong and the lock either will not clip in, or it clips in and then wobbles. Three things decide whether a bracket works for you — the lock it accepts, the tube it clamps to, and how it releases.
Start with the lock, not the bike
A mount is built to a family of U-locks, not to all of them. The OnGuard bracket in this list is made for the Pitbull and Bulldog series specifically, and the maker states it does not take other OnGuard models such as the Rock Solid. Kryptonite’s carrier takes the majority of U-locks on the market and lists a fit range for crossbars of 20-50mm and shackles of 10-24mm. Measure your shackle bar thickness with a caliper or a wrench before you buy anything.
Match the clamping diameter to your frame tube
Frame tubes vary more than most riders expect. The Kryptonite carrier clamps handlebars from 22mm to 32mm, while the ABUS rack holder bolts to luggage carrier struts of 5-16.5 mm — two very different jobs. Seatpost and top-tube clamps want a snug fit you can shim with rubber; rack mounts want a strut you can bolt through. On a fat-tube or aero frame, a rubber block and strap wraps the tube where a hard clamp cannot close.
Decide how you want to grab the lock
A quick-release lever like the orange one on the OnGuard lets you pull the lock free without tools at the rack, which matters when you are in a hurry. A Velcro or hook-and-loop strap design takes a few seconds longer but conforms to odd shapes. Think about your daily routine: if you lock up several times a day, tool-free removal earns its place; if the bike carries the lock for hours and you only stop once, stability beats speed.
Where on the bike the mount sits
Seatpost and top-tube mounts keep the weight near your body and leave the bars clear. Handlebar and stem mounts put the lock where you can see it but can crowd a light or bell. Rear-rack and pannier mounts move a heavy lock low and out of the way, though the lock then swings with the frame on rough ground. The leather holster in this list can hang from a saddle with metal tabs, strap to a front basket, or loop onto a rear pannier rack.
Side-by-Side Comparison
Every row uses the same three dimensions so you can scan fit, weight, and mounting point at a glance. Where a maker does not publish a figure, the cell reads as a dash rather than a guess.
| Model | Best For | Lock Fit | Mount Point | Weight | Amazon |
|---|---|---|---|---|---|
| OnGuard All Tube Bracket 8053★ Best Overall | One-handed lock release | Pitbull & Bulldog series | Seatpost & frame tubes | 2.56 ounces | Amazon |
| Kryptonite Handlebar CarrierMost Versatile | Wide lock compatibility | Most U-locks; shackles 10-24mm | Handlebars 22mm – 32mm | 3.52 ounces | Amazon |
| Two Fish Megablock XL | Large U-locks on fat tubes | Large U-locks | Frame, rubber block & strap | 9.07 g | Amazon |
| ABUS EaZy KF Bracket | Light everyday carry | U-shackle locks | Frame mount | 4.16 ounces | Amazon |
| ABUS Lock Holder UGH 02 | Rear rack mounting | U-locks & Steel-O-Flex | Luggage carrier struts 5-16.5 mm | 80 g | Amazon |
| Two Fish Lockblocks | Featherweight handlebar carry | U-locks | Handlebar & stem | 1.44 ounces | Amazon |
| oopsmark U-Lock Holster | Quiet leather carry | Kryptonite U-locks | Saddle, basket, or pannier rack | — | Amazon |
Detailed Reviews
1. OnGuard All Tube Bracket 8053
An orange lever you flip with one hand and a clamp that saddles almost any tube on the frame.
If you own a Pitbull or a Bulldog U-lock, this is the bracket the lock was designed around, and it is the pick I would start with. The clamp is built to grip seatposts and frame tubes, and a vinyl coating on the finish keeps the hardware from grinding into your paint. At 2.56 ounces it adds almost nothing to the bike, and the whole unit measures 6 x 5 x 1 inches, so it tucks behind a tube without catching your leg.
The reason it earns the top slot is the everyday routine. The orange quick-release lever pulls the lock free without tools — you walk up to the rack, pop the lever, and the U-lock is in your hand. A twist-to-tighten mechanism lets you snug the clamp down so the lock does not slip or rattle over broken pavement. Tighten the clamp screws firmly but do not over-torque them, since the housing is the part that takes the strain.
Owners who use it with the right lock family tend to be happy with how the lock sits. The recurring theme in the review pages is that the plastic housing is the weak link over the long run — some report it failing after weeks of use — and the fit takes a firmer push than people expect to click the lock into place. Compatibility is what wins people over, and it is the reason this bracket leads the list: put it on the correct OnGuard lock and the pairing is exactly right.
What earns it first place
- Tool-free orange lever makes lock removal a one-second job at the rack
- Twist-to-tighten clamp holds the lock against slipping and rattling on rough roads
- Fits most frames, top tubes, and seatposts rather than one specific tube size
- Vinyl-coated finish protects the paint where the bracket touches the frame
Where it asks for care
- Built only for the Pitbull and Bulldog series — not other OnGuard models, including Rock Solid
- The plastic housing is the part to watch over months of daily use
- Expect to push firmly to seat the lock; it does not click in with a light touch
Buy it when: you already ride a Pitbull or Bulldog and want fast, tool-free lock access on a frame or seatpost tube.
Before you commit: check the lock family on your U-lock first, because this bracket will not take an OnGuard Rock Solid or a mixed-brand lock.
2. Kryptonite Bike Lock Handlebar Carrier
A handlebar cradle that swallows nearly any U-lock and straps it down for the ride.
Where the OnGuard bracket locks you into one lock family, this one is the generalist. Kryptonite states it fits the majority of U-locks on the market, and it publishes the actual numbers: crossbars from 20-50mm and shackles from 10-24mm. If you are not sure what lock you will be carrying next season, this is the bracket that keeps your options open. It clamps handlebars from 22mm to 32mm, which covers the common flat-bar and town-bike widths.
It weighs 3.52 ounces and measures 8.4 x 5.8 x 2.8 inches as a package, so it sits on the bars as a visible cradle rather than hiding behind a tube. The design uses a two-point lock holder — the maker calls it patent pending — that supports the lock at two spots instead of one, plus hook-and-loop straps that stabilize the shackle. One contact point lets a heavy shackle swing; two points plus a strap cut most of that sway.
On the bike, it suits riders who want the lock where they can see it and hear it, and who swap locks now and then. It takes heavy Kryptonite locks without complaint, and mounting and removal are quick. The honest catch is that it lives on your handlebars, so you are giving up bar real estate that a light or a bell might want. It is also the pick to think twice about if you ride drop bars with tight cable runs.
Right for a lock-swapper: if you are not locked into one brand of U-lock, the published 10-24mm shackle and 20-50mm crossbar range makes this the least fussy bracket in the list.
Bar real estate is the tax: a handlebar cradle is in your line of sight and in the way of accessories, so riders with a crowded cockpit should look at the rack and saddle mounts below instead.
Reach for it if: you want one bracket that will take whatever U-lock you own now or next, mounted up front where you can keep an eye on it.
Look elsewhere if: your handlebars are already full of light, bell, and computer, or your shackle falls outside 10-24mm.
3. Two Fish Megablock XL Pump Holder
A rubber block with an extra-long strap, built to lash a big U-lock to an oversized frame.
Most clamps assume a round tube of a certain size; this one assumes nothing. The Megablock XL is a durable rubber block with Velcro attachments and an extended strap, and Two Fish positions it as the holder for large U-locks plus the bracket of choice for fat-tube bikes. If you ride a frame with oversized tubing or a rack with awkward struts, a strap-and-block design conforms where a hard plastic clamp cannot.
The published dimensions are 9.5″L x 5″W x 1″H, and the block weighs about 9.07 g. That makes it the lightest mount in this list by a distance and the simplest to move between bikes — no screws, no torque spec, no bracket to align. You wrap the strap, tension it, and the load is held against the tube.
The trade-off is the nature of any strap mount: some riders find the block slides a little on slick or narrow tubes, and the strap length is what decides how big a tube it will wrap. Function and performance are what buyers highlight most — it holds large accessories where a clamp will not reach. On fat, non-round, or aero-shaped tubing, a strap-and-block is the only mount shape that closes around the tube.
The fit-anything option: an extended strap and rubber block handle tubes and struts that a rigid clamp simply cannot grip, and the light weight means you can move it from bike to bike.
The honest caveat: strap mounts can shift on smooth or narrow tubes, and how far the strap reaches sets your size limit — measure the tube before you commit.
Worth it for: fat-tube frames, aero bikes, and anyone who wants a tool-free mount they can shift between two bikes in seconds.
Skip the swap if: you ride a slim round tube where a rigid clamp holds better, or you want a mount that never needs re-tensioning.
4. ABUS EaZy KF Bracket for U-Shackle Locks Black
A frame bracket light enough you forget it is there, built for U-shackle locks.
At 4.16 ounces this is a featherweight among frame brackets, and that is the point. ABUS builds it to carry a U-shackle lock without adding noticeable weight to the bike, and the body measures 4.72 x 3.15 x 2.36 inches — small enough to sit quietly on the frame. Installation is straightforward, and the whole idea is that transporting the lock becomes a non-event.
Compare it with the ABUS rack holder further down and you see two different philosophies from the same brand. This one mounts to the frame at 4.16 ounces, while the ABUS rack holder is listed at 80 g. The Two Fish Lockblocks at the bottom of the list comes in at 1.44 ounces, so if raw weight is your only metric, that One Fish-style block is lighter still — but this bracket is the more substantial frame-mounted part.
It suits commuters who want the lock on the frame and out of the way, not swinging from the bars. The material spec is listed as multi, so treat it as a composite rather than a pure metal bracket, and give the mount a firm seat on a clean tube. Buyers who pair it with a matching ABUS U-shackle lock get the fit the bracket was designed for.
Understated and light: 4.16 ounces, a compact 4.72 x 3.15 x 2.36 inch body, and easy installation make this the bracket you fit once and stop thinking about.
The one thing to check: it is a U-shackle bracket, so confirm your lock is a U-shackle type before ordering rather than assuming any lock will seat.
Best matched with: riders carrying an ABUS U-shackle lock who want a low-weight frame mount that stays out of the way.
Not the one for: you if you need a rear-rack carrier or a clamp that solves fat, non-round tubing — the rack holder and the strap block do those jobs better.
5. ABUS Lock Holder UGH 02 for Transport on the Luggage Rack
A German-made rack bracket that moves the weight of a heavy lock down and out of the way.
Here is the mount for the rider who has a rear rack and wants the lock nowhere near the bars. The UGH 02 bolts to luggage carrier struts with a diameter of 5-16.5 mm, so it belongs to the rack, not the frame. It carries U-locks and Steel-O-Flex locks — the cable locks wrapped in steel sleeves — which makes it the widest lock-type fit in this list after the Kryptonite. It is made in Germany and weighs 80 g.
The set includes three brackets, and the point of three is to fix the lock in three places rather than one. A single contact point lets a heavy lock swing with the bike; three contact points clamp it against the rack so it stays put over rough ground. The finish is a coated steel sleeve, and the bracket is listed as black.
Measure your actual carrier struts before ordering, because 5-16.5 mm is a real range and a strut outside it will not bolt up. Compared with the frame-mounted EaZy KF bracket from the same brand, this is a fixed rack accessory rather than a removable frame piece, so it stays on the bike with the rack. On a rear rack, a heavy U-lock rides steadier bolted low over the rear wheel than swinging from the bars.
The rack-rider’s case
- Three brackets fix the lock at three points for a steady hold on rough ground
- Takes U-locks and Steel-O-Flex cable-in-steel locks, not just one type
- Bolts to luggage carrier struts of 5-16.5 mm, so the weight rides low and rear
- Made in Germany with a coated steel-sleeve finish
What to weigh up
- It needs a rear luggage rack — no rack, no mount
- Your carrier struts must fall inside 5-16.5 mm or it will not bolt on
- It stays on the bike with the rack rather than lifting off with the lock
The right call if: your bike wears a rear rack and you want a heavy U-lock carried low and clamped at three points.
Measure first: strut diameter and the presence of a rack are both hard requirements here, so check both before you order.
6. Two Fish Lockblocks U-Lock Mount
A USA-made block that weighs 1.44 ounces and disappears onto your handlebar or stem.
If you want the least mount possible, this is it. The Lockblocks weighs 1.44 ounces and measures 4.25 x 3.5 x 0.75 inches — the smallest hardware in this list, and it is made in the USA. It straps to the handlebar or stem, so the lock rides up front where you can grab it. Compare that with the ABUS EaZy KF at 4.16 ounces and the Kryptonite carrier at 3.52 ounces, and the weight difference is the whole pitch.
The install is a block and strap job — easy to fit onto a bar or stem, though the setup takes a little figuring out the first time rather than being obvious out of the bag. It holds a U-lock against the bar, and the design flexes enough to sit on various bar shapes. For a light lock on a town bike or a commuter, that is all you need from a mount.
The recurring caution is durability over the long haul — some report the block breaking after a few months of heavy use, so treat it as a light-duty mount rather than a permanent fixture for a very heavy lock. Ride with a large shackle and you may want the Megablock’s rubber block instead. Ride with a modest U-lock and want minimal weight, and this earns its place.
Minimal by design: 1.44 ounces, 4.25 x 3.5 x 0.75 inches, handlebar or stem mounting, and USA-made construction make it a very light way to carry a U-lock up front.
Size the job to it: it is a light-duty block, so a very heavy lock over months of hard use is asking more than this mount is built for.
Pick it when: you carry a modest U-lock on a commuter or town bike and weight is the number you care about most.
Pass on it if: you ride a large, heavy shackle every day and want a mount that takes the load without complaint.
7. oopsmark U-Lock Holster
A handmade leather sleeve that silences the metal-on-metal clatter of a carried U-lock.
This is the pick for the rider who is tired of the clunk. The holster is made from 7oz top-grain vegetable-tanned leather, and leather absorbs shock as you ride, which is what quiets the lock. It comes in Tan, Brown, or Black, so you can match it to your saddle. If the noise of a steel lock bouncing on a steel frame is what bugs you, leather is the material that answers it.
The mounting options are broader than any clamp here. It hangs behind a saddle with tabs — the saddle needs metal tabs, like a Brooks — or you can add your own. It straps to a front basket, usually crossing the straps in an X pattern. It loops onto a rear pannier rack by wrapping the side rails and tying down at the bottom.
Two measurements decide whether the saddle route works. The distance between your seat and frame must be longer than your lock, and the maximum distance between the attachment points is 14.6 inches (37cm). It is built for Kryptonite locks, so check your lock’s brand before ordering. The honest catch is durability: leather this thin is a wear item, and some report it failing within a short time of regular use, so give the straps an eye now and then. When the straps hold, it is the quietest carry in this list.
The quiet-ride answer: 7oz vegetable-tanned leather absorbs the shock that turns a steel lock into a rattle, and the saddle, basket, and pannier options cover almost any bike.
The real limits: it is built for Kryptonite locks, saddle mounting needs metal tabs and a seat-to-frame gap longer than your lock, and the leather straps are the part to keep an eye on.
Best for the noise-sensitive: a leather holster that mounts to saddle, basket, or rear rack and takes the clatter out of a carried Kryptonite lock.
Check before you buy: your lock brand needs to be Kryptonite, and a saddle mount needs metal tabs and enough clearance for the lock to hang free.
Know the Specs
Shackle and crossbar fit
The numbers that decide whether a bracket accepts your lock are the shackle diameter (the thickness of the U-shaped bar) and the crossbar width. The Kryptonite carrier publishes a shackle range of 10-24mm and a crossbar range of 20-50mm. If your lock falls outside those figures, it will not seat no matter how tight the clamp goes. Measure with a caliper or test a wrench on the bar — a millimetre makes the difference between a snug fit and a lock that rattles loose.
Mounting diameter and location
A bracket’s clamp is built for a specific tube size. The Kryptonite carrier clamps handlebars from 22mm to 32mm, while the ABUS rack holder bolts to luggage carrier struts of 5-16.5 mm. Frame and seatpost mounts suit riders who want the lock close to the body and the bars clear; handlebar mounts put it in sight; rack and pannier mounts move the weight low. Match the mount to the tube you actually have, not the tube you assume you have.
Weight and ride feel
Mount weight is small in absolute terms but adds up with the lock. The Two Fish Lockblocks tips the scale at 1.44 ounces, the OnGuard bracket at 2.56 ounces, the Kryptonite carrier at 3.52 ounces, and the ABUS EaZy KF at 4.16 ounces. Lighter mounts move less and strain the tube less; heavier brackets often carry the lock more rigidly. A strap-and-block design generally conforms to odd tubes better than a hard clamp.
Release mechanism and material
How you get the lock off matters every time you park. A quick-release lever like the OnGuard’s orange one lets you grab the lock without tools; a twist-to-tighten clamp holds it firmly against slipping. Velcro and hook-and-loop straps take a second longer but fit odd shapes. On materials, a vinyl-coated clamp protects paint, a rubber block absorbs vibration, and 7oz leather quietens the metal clunk. Choose the mechanism that matches how often you stop.
Common Questions
Will this bracket fit my U-lock if it is not an OnGuard or Kryptonite?
Can I mount a U-lock bracket on a fat-tube or aero frame?
How do I stop my U-lock rattling on the frame?
Is a handlebar mount better than a seatpost mount?
Will a rack-mounted lock holder work on any rear rack?
Does a heavier bracket hold a lock more securely?
Can I use a U-lock holster on a saddle without metal tabs?
How long should a U-lock mount last?
Can I move one mount between two bikes?
Is a leather holster as secure as a clamp?
The Bottom Line
For most riders, the u-lock bike mount that gets the daily job done is the OnGuard All Tube Bracket 8053, because its tool-free orange lever and twist-to-tighten clamp make grabbing the lock at the rack a one-second job — provided you own a Pitbull or Bulldog. If you want one bracket that takes whatever U-lock you own now or next, the Kryptonite Handlebar Carrier publishes a 10-24mm shackle and 20-50mm crossbar fit that keeps your options open. And if your bike wears a rear rack and you carry a heavy lock, the ABUS UGH 02 clamps it low and steady at three contact points.
Before you click buy, do one thing: measure your shackle and your tube. That single check decides whether a bracket fits at all, and it saves you returning a mount that looked right in the listing. Matching the bracket to your shackle diameter and your tube diameter is what finally ends the rattle.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




