Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Buying a stump bucket is mostly about one thing: whether the steel and the cutting edge can survive being driven into a root ball over and over. The second thing is the mount — a bucket that does not bolt to your loader is a very expensive paperweight. This guide covers six Titan Attachments buckets built for skid steers and tractors, sorted by the job each one actually does best.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
You will see the differences in steel thickness, tooth design, and mounting style laid out plainly. What follows is a practical, spec-first look at the best tree stump bucket options for skid steers and tractors.
Top Picks


How To Choose The Best Tree Stump Bucket
A stump bucket is a narrow, heavy steel scoop that slides under a stump and pops it out with leverage instead of grinding it down. Getting the right one means matching four things to your machine and your ground: the mount, the steel, the teeth, and the weight.
Start with the mount, not the bucket
Most skid steers and many compact tractors use SSQA — a skid steer quick attach plate that latches the attachment on and off in seconds. The Ford 8N, 9N, Kubota BX, and Kioti tractors are named across several of these listings as compatible with that plate.
John Deere loaders are the big exception. They often use a hook and pin system instead, so a bucket built for that hookup will not bolt to a standard quick attach plate. Check your loader’s coupler before anything else.
Serrated edge and replaceable teeth do the real work
A serrated leading edge is a jagged cutting lip that saws into roots rather than bouncing off them. Replaceable teeth add bite at the tips and, just as importantly, can be swapped once you wear them down instead of retiring the whole bucket.
Weight cuts both ways
A heavier bucket pushes through hard ground with less fight, but every pound of attachment is a pound your loader cannot put into lifting. A 160-pound economy bucket leaves far more capacity free than a 588-pound grapple. Match the weight to what your machine is rated to carry.
Steel thickness sets the ceiling
Structural steel plate is measured in fractions of an inch, and the number tells you how much abuse the shell will take before it bends. Thicker plate handles bigger stumps and harder ground. Thinner plate keeps the bucket light and quick for smaller work.
Side-by-Side Comparison
Detailed Reviews
1. Titan Attachments Economy Series Stump Bucket
Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.
The lightest bucket here still cuts roots, and that is the whole point.
At 160 pounds, this is the bucket you want if your loader’s lifting capacity is already spoken for. Every pound you save on the attachment goes straight into pulling the stump, not carrying the steel. It bolts to any machine with a skid steer style quick tach mounting system, including the Ford 8N, 9N, Kubota BX, and Kioti tractors named on the listing.
The business end is an AR400 steel tip with serrated edges. AR400 is a wear-resistant steel plate, which means it holds its shape against grit and rock instead of rounding off. The serrated lip breaks ground and shreds roots so the bucket slides under a stump with less resistance — the practical payoff is fewer passes and less back-and-forth repositioning. The shell is 5/16″ thick structural steel, fully reinforced, with laser-cut slits in the mounting plate so you can see your line during precision clearing.
Reviewers keep coming back to how well it works — digging out buckthorn and smaller stumps is the job it gets named for most. Quality and value come up right behind it, and compact tractor buyers report the SSQA plate bolts straight on. It is a 4.5+ star item across 100+ ratings, and the feedback stays consistent.
Where this bucket shines
- 160 pounds leaves the most lifting capacity free of anything on this list
- AR400 steel tip and serrated edges bite into roots without a saw
- 5/16″ structural steel shell with a reinforced, fully welded build
- Universal SSQA plate fits a broad spread of loaders and compact tractors
Where it stops short
- Economy-grade plate and a 160-pound frame are built for smaller stumps, not the big ones
- No replaceable teeth — the cutting edge is the wear part
Reach for this if: you are clearing small to mid-size stumps and light root work on a compact tractor or skid steer and want your capacity back.
Look elsewhere if: you are dropping big hardwoods or working rocky ground all day — the Extreme Duty buckets below carry thicker plate for that.
2. Titan Attachments Mini Skid Steer Stump Bucket
Half-inch plate that turns a stubborn stump into a lifting job.
The steel is the story. This bucket is built from 1/2″ structural steel with thick gussets and a 1/2″ cutting edge — against the Economy Series at 5/16″, that is a meaningfully heavier shell for hard ground. Three replaceable cast iron teeth handle the ground breaking, and a serrated leading edge shreds roots without a saw or shears.
It stands 25″ high with an overall footprint of 46″ wide by 58″ deep. The working height is 24″ high with an inside width of 16″ by 53″ deep. In practice that narrow inside width is what lets the bucket drop between roots and wedge under a stump rather than skidding across the surface.
Owners describe it as a beast on Kubota skid steers and very well built — it rips roots and stumps without complaint. Weight is the recurring conversation. At 470 pounds it is a serious mass to hang off the front of your loader, and several buyers call it heavy. That heft is exactly what drives the bucket into hard ground, but it does eat into what your machine can lift.
The trade written plainly: 1/2″ plate buys you durability, and 470 pounds is what you pay for it in lifting capacity.
Pick this one when: your skid steer has the lift rating to carry 470 pounds of bucket and your ground is hard, root-bound, or full of stubborn stumps.
Think twice if: your loader is on the smaller side or you mostly clear light growth — the Economy Series does that work at a fraction of the attachment weight.
3. Titan Attachments Extreme Stump Bucket
It digs the stump out, then picks it up and carries it away.
This is the only bucket in the article that grabs. A rake powered by a 3,000 PSI cylinder (a hydraulic ram that pushes the jaw shut) opens to a 45″ max jaw opening, so once a stump or rock is loose you can clamp it and haul it off the property instead of pushing it into a pile. That changes the whole work flow on a clearing job.
The digging end matches the rest: a 0.5″ wide serrated leading edge with three replaceable cast iron bucket teeth, plus 0.5″ structural sidewalls. It weighs 588 pounds and measures 63 x 48 x 33 inches — the largest footprint here, and heavier than the Mini Skid Steer bucket at 152 pounds by a wide margin. The universal SSQA hookup fits machines with a skid steer quick attach system, including the Ford 8N, 9N, Kubota BX, and Kioti.
Hydraulic attachments come with extra ownership. The listing includes greaseable pins, hoses, flat-faced couplers (the fittings that snap the hoses onto your machine), and a protective canvas sleeve for the hoses, so you are not hunting for fittings on day one. Build quality is the trait this bucket gets praised for most, and owners mention the grapple clamping whole trees and hauling them off. At 3.5+ across a few dozen ratings, it is a solid, not spotless, record — and some of that depends on matching the hydraulic demands to your machine.
Why it earns its place
- 3,000 PSI cylinder with a 45″ jaw opening grabs and carries what it loosens
- 0.5″ serrated leading edge and three replaceable cast iron teeth
- 0.5″ structural sidewalls on a 46″ wide, 58.5″ deep body
- Hoses, flat-faced couplers, greaseable pins, and a hose sleeve included
What the extra capability costs you
- 588 pounds is the heaviest attachment in this article by a large margin
- Hydraulic hookup and hose care add setup steps a plain bucket does not need
Buy it for: clearing jobs where stumps, buried rocks, and heavy logs all need to leave the site — the grapple saves you a second trip with forks.
Pass if: your loader is marginal on lift capacity or you only need to pop small stumps; the weight and hydraulics are more machine than that job needs.
Know the Specs
Mount style (SSQA vs hook and pin)
SSQA stands for Skid Steer Quick Attach — a latching plate that lets you swap attachments in seconds. It is the common standard, and it is what the Ford 8N, 9N, Kubota BX, and Kioti tractors in these listings are named against. John Deere loaders frequently use a hook and pin coupler instead, which is a different physical connection entirely. A bucket built for one will not bolt to the other, so this is the first spec to confirm before you buy anything.
Steel thickness
Structural steel plate is sold in fractions of an inch, and the figure tells you how much force the shell tolerates before it deforms. The buckets here range from 5/16″ up to 1/2″. Thicker plate handles bigger stumps and harder ground; thinner plate keeps the bucket light so more of your loader’s capacity goes into lifting. Neither is better in isolation — it depends on what you are digging.
Serrated leading edge and replaceable teeth
The leading edge is the front lip that first contacts the ground. Serrating it turns that lip into a row of cutting points that saw into roots rather than skidding over them. Replaceable teeth are separate bolt-on pieces at the tips; once they wear, you swap them instead of replacing the bucket. LW80 is the tooth family named on the two USA-made buckets here.
Attachment weight vs lifting capacity
Your loader has a rated lifting capacity, and the attachment counts against it before you ever touch a stump. A 160-pound bucket leaves far more capacity free than a 588-pound grapple. Heavier buckets push through hard ground more easily, but the weight is a real cost. Match the bucket to what your machine is rated to lift, not to the biggest number on the page.
Common Questions
Will a skid steer stump bucket fit my Kubota BX or Kioti tractor?
Can I use a stump bucket on a John Deere loader with hook and pin mounting?
What is the difference between a stump bucket and a stump grinder?
Do I need replaceable teeth on a stump bucket?
How heavy is too heavy for my skid steer?
Will a serrated leading edge damage the roots I want to keep?
What does AR400 steel mean on a stump bucket?
Does a stump bucket grapple need a third hydraulic function?
Can a stump bucket lift concrete slabs as well as stumps?
Where can I get replacement teeth for a Titan stump bucket?
The Bottom Line
For most buyers, the tree stump bucket worth starting with is the Titan Economy Series Stump Bucket. Its 160-pound frame keeps your loader’s capacity free, the AR400 tip (a wear-resistant steel grade) and serrated edge handle small stumps and light root work, and the universal SSQA plate (the standard quick-attach mount most skid steers use) fits the widest spread of machines. If your ground is hard and your stumps are big, step up to the Extreme Duty Stump Bucket & Tree Spade and its 1/2″ plate. And if stumps are only half the job and you also need to haul rocks and logs off site, the Extreme Duty Stump Bucket Grapple with its 3,000 PSI cylinder and 45″ jaw opening is the one to reach for.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.
