Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A cracked or dangling side mirror fails your state inspection and makes every lane change a guess. The fix is simpler than most people fear: a vehicle-specific replacement mirror that bolts to your existing door mount and plugs into your factory power connector. Get the OE reference number right and you are usually back on the road the same afternoon.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Below you will find nine real assemblies sorted by the Toyota models they fit, from a Corolla driver-side unit to a RAV4 mirror with heat and a blind spot monitor. Every one is a full mirror assembly, not a stick-on glass patch, so read on for the toyota mirror replacement that matches your car, your pins, and your options.
Top Picks



How To Choose The Best Toyota Mirror Replacement
The most common mistake is ordering by year alone. Toyota ran different mirror styles and connector plugs within the same model year, so the reference number on your old mirror is the real starting point. Pull the original mirror off, read the Partslink or OE number off the back, and match it before you buy anything.
Match the reference number, not just the model
Each listing names a Partslink number and an OE number the assembly replaces — TO1320179, 87940-02391-CO, TO1321167, and so on. Those strings are how the aftermarket identifies your mirror’s exact shape, glass curve, and plug. When the number on the new listing matches the number on your broken mirror, you get a direct bolt-on part. When it does not, even a mirror for the right car can leave you with a plug that will not seat.
Know which features your car actually has
A power mirror moves its glass with the factory switch inside the car. Heated glass clears fog and frost. A turn-signal mirror has an indicator built into the housing. A blind spot mirror carries a sensor that warns you about a vehicle beside you. Replacement mirrors are built to match one exact feature set, and the listings here state plainly whether a unit is non-heated or non-folding. If your old mirror had heat and you buy a non-heated unit, the glass simply will not warm up.
Check the fold and the pins
Non-folding means the housing is fixed to the door and does not swing in when something clips it. Manual folding means you push it in by hand. On the RAV4 listing, the pin count (8 pins) on the connector is spelled out because the number of wires in the plug has to match the number of circuits in your door harness. Fewer pins than your car needs, and your heat or turn signal will sit dead.
Side-by-Side Comparison
| Model | Best For | Fits | Side | Operation | Amazon |
|---|---|---|---|---|---|
| Dependable Direct TO1320179★ Best Overall | Camry drivers wanting a painted-black factory look | 2003-2008 Camry | Driver (Left) | Power, non-folding | Amazon |
| ECCPP Corolla MirrorBest Value | Budget Corolla owners doing a quick swap | 2003-2008 Corolla | Driver (Left) | Power, non-heated | Amazon |
| SCITOO Camry MirrorTop Performer | Camry Hybrid owners who want factory control | 2007-2011 Camry | Driver (Left) | Power, non-folding | Amazon |
| SCITOO Corolla Passenger Mirror | Corolla owners replacing the right side | 2003-2008 Corolla | Passenger (Right) | Power, non-heated | Amazon |
| TYC 5210531 | Older Camry owners who want OE-grade connections | 1997-2001 Camry | Passenger (Right) | Power | Amazon |
| Dorman 955-1238 | Toyota owners who want a reverse-engineered assembly | Select Toyota models | Driver | Power, non-heated | Amazon |
| Dependable Direct TO1320131 | USA-built 1997-2001 Camry owners, unpainted finish | 1997-2001 Camry (USA built) | Driver (Left) | Power, non-folding | Amazon |
| TYC 5320332 | 4Runner owners replacing the driver side | 2003-2008 4Runner | Driver (Left) | Power | Amazon |
| Lqito RAV4 Mirror | Newer RAV4 owners needing heat, signal and blind spot | 2019-2025 RAV4 | Passenger (Right) | Power, heated, signal, blind spot | Amazon |
Detailed Reviews
1. Driver Side Mirror fits Toyota 2003-2008 TO1320179
Our pick — 4.5+★ from 800+ verified ratings; the strongest balance of quality and price.
The painted-black driver mirror that Camry owners keep calling a factory match.
For a fifth-generation Camry with a smashed driver-side housing, this Dependable Direct assembly is the safest first call. It replaces Partslink TO1320179 and OE 87940-02391-CO, so once those numbers match your old mirror you know the mounting and the plug are right. The finish arrives painted black, which means no rattle-can job in the driveway.
Build quality dominates the feedback on this mirror, with installation close behind it. Owners describe it as a part that looks and works like the factory unit, and that glossy black paint is called out repeatedly for matching the car rather than sitting a shade off. A Camry door panel swap here is a driveway job, not a body-shop bill.
Two honest notes before you buy. The glass is flat rather than convex, so the view matches the original flat mirror rather than widening it. And while the glass moves up, down and side to side, the auto-adjust travel does not always reach as far inward as the factory piece — dial your preferred angle in slowly the first time and you will likely settle it where you need it.
What earns its keep
- Painted black finish saves you a paint step on install day
- Both the Partslink and OE reference numbers are printed on the listing
- Solid, factory-feeling build that holds up as a long-term fix
- Vehicle-specific fit for 2003-2008 Camry, door-mounted
Where it asks patience
- Flat lens, so no wider field of view than the original
- Auto-adjust range can fall a little short of full inward travel
- Non-folding housing — it will not swing in on a tight garage
Grab this one if: you drive a 2003-2008 Camry and want a painted-black driver mirror that bolts straight on.
Look elsewhere if: your car has heated glass or a folding housing — this unit has neither.
2. ECCPP Power Side View Mirror
The cheapest route to a working driver mirror on a ninth-gen Corolla.
If the driver mirror on your 2003-2008 Corolla is hanging by its wires, this ECCPP unit covers the basics and nothing more. It replaces 87940-02380 and TO1320178, runs on your factory power controls, and comes in at 2 pounds. Against the SCITOO Camry mirror below, it measures 8.66 x 8.5 x 6.85 inches versus that unit’s 12.2 x 7.87 x 6 inches — noticeably the more compact housing of the two.
The installation is where it shines. Buyers report “They appreciate its easy installation, with one customer completing the process in 20 minutes.” You pull the door trim, unplug the harness, and bolt the new housing in place — ECCPP includes manual instructions and calls it a 20-30 minute job. Quality carries this mirror’s reputation, with fit close behind it.
The trade-off is the glass travel. It tilts up only a fraction of what the original mirror could, so if you are tall or short enough to need a wide adjuster swing, set your seat first and check the angle before you button the door back up. It is also non-folding and non-heated, which is fine on a base Corolla and wrong on a car that came with either option.
Who should order it: Corolla owners on a base-trim car who want the cheapest working power mirror and do not need heat or folding.
The catch to weigh: a narrow adjuster sweep and no heat, so it suits a plain driver-side swap rather than a feature-for-feature restoration.
Reach for this if: the price matters and your Corolla has a plain, non-heated driver mirror.
Pass it over if: the old unit on your car had heat, folding, or a wide adjuster range you rely on.
3. SCITOO Driver Side View Mirror
A Camry Hybrid mirror that plugs in and moves with your factory switch.
Here is the pick for a 2007-2011 Camry, including the Hybrid, where the factory switch inside the cabin needs to keep working. SCITOO lists the OE numbers 87910-AA080 and 87910-AA904 alongside Partslink TO1321167, so verify against the back of your broken mirror and this becomes a genuinely plug-and-play unit. The housing comes with the assembly, and the ABS plastic body is backed by a 1-year warranty.
Owners get exactly what the listing promises: the glass moves electrically off the car’s own controls, and the whole thing lines up with the door opening without shimming. The overall build earns the most confidence here, with installation right behind it, and owners repeatedly describe the mirror as an exact visual match once it is on the car. It also measures 12.2 x 7.87 x 6 inches, the larger housing compared with the ECCPP Corolla mirror at 8.66 x 8.5 x 6.85 inches.
The mirror is non-folding and non-heated, so do not buy it hoping to add either feature. It is a like-for-like replacement for a powered, plain-glass Camry door mirror, and that is the job it does well.
Why Camry owners trust it
- Fits both the standard and Hybrid 2007-2011 Camry
- Factory power controls move the glass with no extra wiring
- Housing included, so no trimming or swapping shells
- 1-year manufacturer warranty behind the ABS housing
Where it stops short
- Non-heated and non-folding — no feature upgrade
- Convex glass gives a curved view, not a flat one
- Hybrid and base trims were built in overlapping years, so read the reference number twice
The right call for: a powered Camry or Camry Hybrid door mirror that needs to plug into the factory harness and work.
Not for you if: the factory mirror on your car folds or heats, because this one does neither.
4. SCITOO Passenger Side View Mirror
The right-hand Corolla mirror that fits without shims or drilling.
A clipped passenger mirror on a Corolla is a two-part decision: right side, right year, right options. This SCITOO unit covers 2003-2008 Corolla on the passenger side, runs on the factory power switch, and lands at 2 pounds. The listing is blunt about the one thing that matters: it is designed to replace an original mirror with these exact options, so if your car was built differently, the glass may not behave as expected.
Fit and functionality are the two traits that carry this mirror’s reputation, and the electronics get called out for working properly once plugged in. It is also a convex lens, so the curved glass widens your view of the lane beside you rather than mirroring a flat pane.
Check your trim before ordering. This is a power, non-folding, non-heated unit, and it will not add a feature your car did not come with. If your passenger mirror originally had heat, keep shopping. If it was a plain powered mirror, this is a straightforward swap.
Straight answer: a solid passenger-side replacement for a plain powered 2003-2008 Corolla mirror, priced to be a one-and-done fix.
The honest limit: it matches one specific option set, so confirm your original had no heat and no folding before you commit.
Best for: Corolla owners replacing the right-hand mirror on a base, non-heated car.
Skip if: your passenger mirror folded or heated — this housing does neither.
5. TYC 5210531 Door Mirror Right-Side
Built to the federal door-mirror standard, down to the connector pins.
For a 1997-2001 Camry, the thing that separates this TYC piece from a generic housing is the detail work. It is designed to OE specifications down to the connectors, so the plug matches the factory harness without splicing. TYC also states the mirror has been tested to meet FMVSS 111, the Federal requirement for door mirrors — a standard the aftermarket does not always chase.
Fit and installation carry its reputation, and it is the lighter assembly of the two obvious rivals here: at 1.8 pounds it undercuts the SCITOO Corolla passenger mirror’s 2 pounds. Owners mention the swap is quick — “Customers find the door mirror to be an excellent replacement part that fits well and is easy to install, taking less than 30 minutes to complete.” The complete assembly ships with housing, glass, bracket, and the technology inside it, so nothing is reused from the old unit.
Durability is the one place opinions split. Some describe the housing as solid; others have had issues over time. Treat it as a normal aftermarket part that needs a careful hand during install, and torque the mounting bolts evenly rather than cranking one side down first.
Where it holds up
- OE-style connectors mean no splicing or adapter harness
- Complete assembly — housing, glass, bracket, and electronics
- Tested to meet FMVSS 111, the federal door-mirror requirement
- 1.8 pounds, the lighter of the two common right-side picks
What to keep an eye on
- Durability draws a mixed response over the long run
- Convex glass, so the view is curved rather than flat
- 1997-2001 Camry only — the housing will not fit later cars
Choose it for: a 1997-2001 Camry passenger mirror where you want factory-style plugs and a tested assembly.
Think twice if: you want a long-term part with a uniform reputation for durability — opinions on this one are split.
6. Dorman 955-1238 Driver Side Door Mirror
A reverse-engineered driver mirror built to mimic the original part.
Dorman’s approach is different from the rest of this list: the company runs a reverse-engineering process to match the original mirror’s look, fit, and function for your vehicle’s specific year, make, and model. The 955-1238 is a complete driver-side assembly — glass, housing, bracket, and technology included — and it is power-operated and non-heated.
The finish is the plain black plastic, so budget for a paint match if your car’s mirror was color-keyed from the factory. The upside is that Dorman tells you exactly how to avoid the wrong part: enter your make, model, and trim into the fit tool before you buy. Quality holds the reputation here, with fit and function close behind it, and it ships as a self-contained unit rather than a glass patch.
Installation needs no special tools or equipment according to the listing, so a socket set and a trim tool cover the job. It mounts on the front of the door and matches select Toyota models, so the reference check is mandatory rather than optional.
The appeal: a complete, reverse-engineered driver mirror that Dorman builds to imitate the factory part, with a fit tool to confirm your exact trim.
The trade-off: plain black plastic rather than a painted finish, so a color-matched car will look two-tone until you paint it.
Worth a look if: you want a driver mirror that mimics the factory part and you are comfortable painting the housing to match.
Move on if: your car’s mirror was painted from the factory and you want a color match straight from the box.
7. Driver Side Power Mirror fits USA 1997-2001 TO1320131
One word decides this mirror: is your 1997-2001 Camry USA-built?
The fitment line on this Dependable Direct unit is specific — 1997-2001 Toyota Camry, USA built only, replacing Partslink TO1320131 and OE 87940-AA010. If your car rolled off a US line, this is a direct bolt-on driver mirror that runs on your factory power controls. If it did not, stop reading and pick a different number, because the door mount and plug will not line up.
The finish is unpainted, so you or a paint shop will need to match it to the car. In exchange you get an assembly built to OEM specifications and a supplier that lists the cross-reference numbers openly. Quality leads the reputation here, with fit behind it, and owners often praise the look of the housing once it is mounted.
Two quirks come up again and again, and both are worth knowing before install day. The mirror can shake at idle — worth checking the mounting bolts are evenly torqued. And the electrical connectors have drawn mixed reports, with wrong-fit plugs showing up for some cars. Confirm pin count against your old mirror’s plug before you order, and this becomes a clean bolt-on rather than a return.
What works in your favor
- Openly states the USA-built fitment requirement, so you know up front
- Full OEM-equivalent reference numbers listed
- Powered by the factory switch, with no extra wiring
- Convex glass opens up the lane beside you
What needs checking
- Unpainted housing means a paint step to match your car
- Some report the mirror shaking at idle
- Electrical connectors have been mismatched on occasion, so verify pins
Made for: driver-side replacement on a USA-built 1997-2001 Camry, where you can paint or live with black.
Not your part if: the car was built outside the US or you need a plug that already matches without checking pins.
8. TYC 5320332 Door Mirror Left-Side
A tall 4Runner driver mirror with a heavier housing and a highway-speed caveat.
The 4Runner sits higher and takes more wind than a Camry, so the mirror assembly on this TYC piece is built heavier — 3.7 pounds versus 1.8 pounds on the TYC Camry mirror above. It fits 2003-2008 4Runner on the driver side and replaces the OE 87940-35620 and Partslink TO1320202 cluster. Like the other TYC unit here, it is built to OE specifications down to the connectors and tested to meet FMVSS 111.
Quality is the trait that carries this one, with function close behind it, and owners describe the swap as a fast job — one buyer had it replaced in about 20 minutes. The fit lines up cleanly on the door, and the value for money is what buyers keep calling out.
The catch is vibration at speed. Several customers note the housing shaking noticeably once you are on the highway, which is a common complaint with taller mirror assemblies. Check that the mounting bolts are fully seated and the base is flush before you call the install done. The gloss black finish also draws split opinions — some like it, some find it harder to keep clean.
Why it earns a spot: a heavy, OE-grade driver mirror for a 2003-2008 4Runner, sized for a bigger door and a taller cabin.
The caveat to plan around: highway-speed vibration and a gloss finish that needs care, so mount bolts are worth torquing twice.
Reach for this if: you drive a 2003-2008 4Runner and want a driver-side assembly built to OE standards.
Consider another option if: highway-speed vibration would bother you and you cannot recheck the mounting bolts yourself.
9. Right Passenger Side Mirror
The loaded RAV4 mirror: heat, turn signal, blind spot, and a factory plug.
Newer RAV4 mirrors carry more electronics than any other car on this list, and this Lqito passenger-side assembly matches that full set. It fits 2019-2025 RAV4, replaces 879100R271, 8791042E41, TO1321384 and TO1321388, and comes in Midnight Black Metallic with power glass, heat, a turn signal, manual folding, and a blind spot monitor. The connector is the 8-pin plug, so confirm the pin count on your old mirror’s harness lines up before ordering.
The paint match is what stands out in use — reviewers point out it matches the car’s original color, and the blind spot monitor and turn signal function as they should once wired. The installation is straightforward and lands around a 30-minute job. Lqito backs the housing with a 3-year limited warranty, which is the longest coverage on this list.
The real check is your car’s options. If your RAV4 came without a blind spot monitor or heated glass, this assembly has electronics your harness cannot feed and may not function properly. It is a feature-for-feature replacement for a loaded passenger mirror, not an upgrade kit for a base car.
What it delivers: a loaded 2019-2025 RAV4 passenger mirror with power glass, heat, turn signal, manual folding and blind spot, in a factory-matched Midnight Black Metallic.
The option check: it only works if your RAV4 already had those electronics, and the 8-pin plug has to match the door harness.
Built for: a 2019-2025 RAV4 with a loaded passenger mirror that needs heat, signal, and blind spot back on the road.
skip it if: your RAV4 did not come with a blind spot monitor or heated glass, since the extra electronics have nothing to plug into.
Know the Specs
Side and Reference Number
The side is simple — driver mirrors sit on the left, passenger mirrors on the right. The reference number is the real spec that decides fit. Every listing names a Partslink number and an OE number, and matching the one printed on the back of your broken mirror is how you avoid a housing that looks right but will not mount. When in doubt, read the number off the old part first.
Power, Heat, and Folding
Power means the glass moves with the factory switch inside the cabin. Heated glass clears fog and frost. Non-folding means the housing is fixed and does not swing in when clipped. These features are either built in or absent, and a replacement should match your car’s original set rather than adding a feature the harness cannot feed.
Connector Pins and Plugs
The number of wires in the connector plug matter. Fewer pins than your car’s harness and a feature like heat or turn signal goes dead. Listings with more electronics spell out the pin count so you can check against your old mirror. A quick look at the plug on the back of the broken part tells you what you need.
Lens Curvature and FMVSS 111
A convex lens curves outward and widens your view of the lane beside you, while a flat lens matches the original flat glass. Some TYC mirrors are stated as tested to meet FMVSS 111, the Federal requirement for door mirrors. That tells you the assembly was built against a published standard rather than improvised.
Common Questions
How do I know a Toyota mirror replacement will fit my car?
Is my Toyota mirror heated or not, and does it matter?
What does the 8-pin connector on the RAV4 mirror mean?
Can I install a Toyota side mirror myself?
What does non-folding mean on a replacement mirror?
Why does a replacement mirror shake at idle or on the highway?
Is a convex mirror better than a flat one?
What is FMVSS 111 and why does it matter on a door mirror?
Does the side of the mirror change the part I need?
Can a replacement mirror add features my car did not have?
The Bottom Line
The safest bet for most Camry owners is the Dependable Direct driver mirror (TO1320179), a painted-black assembly that bolts straight on with no paint step. If your car is a Corolla and budget matters, the ECCPP Corolla mirror is your cheapest route to a working driver side. And for a loaded 2019-2025 RAV4 passenger mirror, the Lqito RAV4 unit is the one to reach for — it brings heat, a turn signal, a blind spot monitor, and a 3-year warranty on top. Order the reference number that matches your old mirror and you skip the return shipping entirely.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





