Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your oven stopped heating and the replacement hunt starts with a tiny plate on the frame — the model sticker. That sticker is the whole game with Tappan parts, because the same-looking coil element can be a different wattage, a different plug, or a different diameter. This guide separates the kits that genuinely fit Tappan ranges from the ones that only look close, and names the part number to check before you order.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Every pick below lists the exact part numbers and stove models it replaces, so you can match your range before you spend a cent on the wrong coil. These are the tappan range parts worth knowing by part number before a burner quits.
Top Picks



How To Choose The Best Tappan Range Parts
Most repair parts come back because of a mismatch, not a defect. Tappan ranges were built over many model years and shared parts with Frigidaire and Kenmore, so an element that fits one TEF series oven may not fit the one in your kitchen. Read the sticker, then match numbers.
Start with the model number, not the photo
Open the oven door and look at the frame or the storage drawer for a plate with a model number like TEF355 or TEF351EWB. Write it down and compare it against the compatible-model list on the part you want to buy. A listing that names your exact series is a far safer bet than one that only says “fits Tappan.”
Know if you need a coil element, a bake element, or an igniter
Electric coil cooktops use plug-in surface elements that lift straight out. Electric ovens use a bake element bolted in at the back with two screws. Gas ovens use an igniter that glows to light the gas. These are three completely different parts and none of them swaps for another — so identify the failure before you shop.
Check diameter, plug style, and terminal angle on coils
Surface elements come in 6-inch and 8-inch sizes, and the plug can be flat or round with a specific terminal angle. A 6-inch element that plugs in the wrong way will not seat properly even if the diameter looks right. Measure your old coil across the top before you order.
Match drip pan shape to your burner type
Round gas burners take round pans with three openings, and coil electric burners take square-ish pans sized to the coil. The center hole on a gas pan has to clear the burner head, so the diameter and the hole size both matter.
Side-by-Side Comparison
| Model | Best For | Part Type | Key Number | Fits Tappan? | Amazon |
|---|---|---|---|---|---|
| 5304430149 / 5304430150 Burner & Drip Pan Kit★ Best Overall | Rebuilding a whole coil cooktop at once | 4 coils + 4 drip pans | 1500W / 2100W, 240V | TEF355, TEF354, TEF324, TEF326, TEF365, TEF383 series | Amazon |
| 5303935066 Gas Oven IgniterQuietest Fix | Gas ovens that click but never light | Gas igniter | Replaces 318177710, 5303210788 | Frigidaire / Electrolux gas models | Amazon |
| 318372213 8″ Surface ElementOne-Burner Fix | One dead large burner | 8-inch coil element | 318372213 | Tappan-branded replacement | Amazon |
| 318177710 Gas Range Igniter | Multi-brand igniter swaps | Gas igniter | Replaces 5303935066 | Tappan, Frigidaire, Kenmore, Roper | Amazon |
| 5303131115 Round Gas Drip Pans | Restoring a tired gas top | 4 round gas pans | 8.25″ dia, 4″ center hole | Frigidaire and Tappan round gas | Amazon |
| TEF351EWB Bake Element | Ovens that heat weak or uneven | Bake element | Replaces 316075104 | Tappan TEF351EWB | Amazon |
| 316075103 Oven Heating Element | Budget oven-element swap | Bake element | Replaces 316075103, F83-455 | Tappan 316075103 models | Amazon |
| 318255101 Upgraded Bake Element (S-Union) | Upgraded stainless element | Bake element | Replaces 318255101, 3016246 | Frigidaire, Kenmore, Tappan | Amazon |
| 318255101 Bake Element (Nanrton) | Budget single-element fix | Bake element | Replaces 318255101, 3202440 | Frigidaire, Gibson, Kenmore, Tappan | Amazon |
Detailed Reviews
1. 5304430149 Burner and Drip Pan Kit
Our pick — 4.5+★ from 550+ verified ratings; the strongest balance of quality and price.
Eight parts in one box: two 6-inch coils, two 8-inch coils, and four pans under them.
If more than one burner on your Tappan electric top has gone cold or grimy, buying piece by piece gets expensive fast. This kit covers the whole surface in a single order — a pair of 6-inch MP15YA elements at 1500W, a pair of 8-inch MP21YA elements at 2100W, and four porcelain drip pans in matching sizes. All of it runs on 240 volts, which is the standard feed for a coil electric range.
What wins people over is fit. The set is built for the common Tappan TEF series — TEF355, TEF354, TEF324, TEF326, TEF365 and TEF383 among them — and the coil spacing lines up with what those stoves already use. Owners consistently describe the install as a swap rather than a project: lift the old element, drop the new one in, and the burner is back. The porcelain pans underneath catch the spills that otherwise bake onto the stovetop.
The honest catch is what is not in the box. It fits Kenmore, Crosley, Whirlpool, Tappan and Frigidaire coil ranges, but the maker states plainly that it does not fit GE or Hotpoint. The spec sheet also warns that matching size alone does not confirm compatibility — the plug style and terminal angle have to line up too, so check your old element against the listing before you commit. At 4.99 pounds for the whole set, expect a package that arrives well-wrapped but a little dense.
What the box actually delivers
- Two 6-inch 1500W and two 8-inch 2100W elements cover every burner position on a standard coil top
- Four porcelain drip pans sized to match the coils, so nothing has to be bought separately
- A cleaning cloth is included to wipe the pans down before the first cook
- The maker backs the set with a 1-year manufacturer warranty
Where it stops working
- Not compatible with GE or Hotpoint coil ranges, so check your badge first
- Same-size coils with a different terminal angle will not seat, even if the diameter looks right
- The whole kit is a single purchase — you cannot buy one burner from it alone
Best fit: Someone with two or more tired burners on a Tappan TEF coil range who wants the whole top refreshed in one afternoon.
Wrong buy if: You own a GE or Hotpoint range, or you only need one 6-inch element and would rather not store the spares.
2. 5303935066 Gas Range Oven Igniter Replacement
For the gas oven that smells like gas but never actually lights.
An igniter is the part that glows red and tells the gas to catch. When it wears out, the oven either fails to light at all or comes up short on heat — the two symptoms the maker lists as the reason to replace it. This 5303935066 unit fits a range of Frigidaire and Electrolux gas ovens, and it cross-references a long list of part numbers including 318177710, 5303210788, 316030600 and 5303207521.
The install is genuinely a two-screw job. You kill the power and the gas at the source, pull the rear or bottom panel, unclip the old igniter, and seat the new one in its place. Once it is in, you relight the oven to confirm the gas catches cleanly. Because the whole part is a single component, there is nothing to adjust afterward — it either glows and lights, or it does not.
Here is where a buyer should slow down: this is a narrower fit than the multi-brand igniter further down the list. It is spec’d for Frigidaire and Electrolux families, so a Tappan owner should confirm their model against the replacement list before ordering. Keep the igniter clean and free of debris and it stays efficient — but dirt buildup on the element is the usual reason one starts to struggle.
The replacement list is the value: a dozen cross-reference numbers in one listing means less time hunting through parts sites to work out whether this is the right igniter.
Small and light: at 5.9 ounces, it ships in a compact box and stores easily until install day.
Go here if: Your gas oven has gone silent on ignition and your model sits in the Frigidaire or Electrolux family.
Hold off if: Your oven badge reads Tappan and you have not yet matched your model against the included part numbers.
3. Tappan 8″ Range Cooktop Burner Element 318372213
One large burner, one part number: the simplest possible coil swap.
When a single big burner dies and the rest of the top is fine, replacing the whole set is overkill. This is the 8-inch replacement surface element for Tappan cooktops, part 318372213, sold as a single coil in stainless steel. It follows the universal plug-in pattern, so it lifts out and slots back in without tools.
This pick wins on the coil itself — buyers praise the finish and build more than anything else, and they consistently call it a solid replacement that fits and heats as expected. Swapping it is a simple job: pull the old element, align the plug, and press it home.
The one honest note is durability. This is a coil element, and a minority of buyers have had one break apart in use — not a pattern, but a real risk with a part this thin. Treat it gently when you lift it out for cleaning and it will serve far longer. Worth knowing too that the listing is thin on specs, so confirm your range uses an 8-inch element before you buy rather than assuming.
Why it earns a place
- Sold as a single 8-inch element, so you pay for exactly the burner you need
- Universal plug-in design means no wiring and no tools
- Stainless steel coil surface holds up to regular wiping
Fair warning
- Coil elements can crack if handled roughly — lift with care
- Only 8-inch, so a dead 6-inch burner needs a different part
Right call for: A Tappan cooktop with one failed large burner and three healthy ones.
Not your part if: The burner that quit is the small front one — that needs a 6-inch coil instead.
4. 318177710 Gas Range Oven Igniter
The igniter that covers the most brands, Tappan included, in one part.
Where the 5303935066 above is a Frigidaire and Electrolux specialist, this 318177710 unit is the generalist. It names compatibility with Frigidaire, Maytag, Kenmore, Whirlpool, GE, Roper, Tappan and Hotpoint, and it cross-references a long string of part numbers starting at WB13K21 and running through 5303935066, 316428600, 5303308452 and more. If your oven badge and model number land anywhere in that list, this is the one to grab.
The build is where it earns its keep. The heating element is silicon carbide (a hard, heat-resistant material) in a ceramic holder — the maker claims three times the lifespan of standard igniters, though that is a manufacturer figure, not a guarantee. The ceramic holder is the part that actually protects the element from cracking in the heat. Buyers report that function, fit and easy install all work, and they describe the fit as clean on more than one brand family.
Treat the unboxing gently. The maker is explicit that the igniter element is fragile and can crack if you are not careful installing it, so set it down softly and do not force the holder into place. The lifetime protection claim covers defects from authorized sellers only, so buy through the right listing and keep your receipt.
The case for it: One of the broadest compatibility lists in this category, spanning the major gas-oven brands and dozens of cross-reference numbers.
The honest part: Ceramic-bodied igniters crack if handled carelessly, and the triple-lifespan figure is the maker’s claim, not a measured one.
The pick when: Your gas oven is a Tappan, Kenmore, Roper, GE or Hotpoint and you want the widest safety net on fit.
Look elsewhere when: You already know your oven is Frigidaire or Electrolux and the specialist igniter covers it.
5. RGP 300 Round Gas Stove Drip Pans, 4 Pack
Four round pans that make a burnt-out gas top look like new again.
A gas stove with encrusted drip pans is not broken — it is just ugly, and scrubbing the burnt layer off rarely works. This set of four round pans replaces the whole set at once. Each one measures 8.25 inches across with a 4-inch center hole and three openings for the burner head. That 4-inch hole is the number to check, because it has to clear the burner on your Tappan or Frigidaire gas range.
Fit is the reason these get bought again and again. Owners mention they drop into older models cleanly, and the immediate result is a stove that looks new without a repair bill. The pans carry the part numbers 5303131115, 540T014P01, 540T014P04, 540T014P05 and several more cross-references, and they are made in the USA with eco-friendly plating.
The honest trade-off is rust. A few customers note the pans rusting within a couple of months — the weakness of any plated steel pan that sits over a gas flame. Dry them right after washing and don’t leave them damp. Compatibility is also mixed on some models, so check your burner size before ordering to save a return.
What owners keep coming back for
- Four pans in one pack, enough to refresh every round burner on the stove
- 8.25-inch diameter with a 4-inch center hole clears the burner head
- Made in the USA with eco-friendly plating techniques
Keep the expectation level
- Plated steel can rust if left wet — dry after every wash
- Compatibility varies by model, so measure your burner before you order
Made for: A Tappan or Frigidaire gas range whose round burners are buried under baked-on food.
Skip if: Your stove has coil electric burners instead — those need square pans, not round.
6. Replacement for Tappan TEF351EWB Oven Bake Element
Bought by model number — it names your Tappan TEF351EWB right on the box.
Most bake elements ask you to cross-reference a string of numbers. This one names the range directly: it is the replacement bake element for the Tappan TEF351EWB, and it replaces part 316075104. If that model number is on your oven frame, you have found the right part without another minute of research.
The symptoms it fixes are the classic oven failures — little or no heat, slow to heat up, uneven heat, or a temperature that never matches the dial. The element is a bolted-in part at the back of the oven cavity, and the install is straightforward: two screws out, the old element free, the new one in, back in place and test. Reviewers point out it fits cleanly and heats back to full strength quickly.
At 1.5 pounds and shipped in a flat 20.2 by 19.8 by 2.2 inch package, it arrives flat and protected, which suits a part that should not be bent. The one thing to watch is that this part is pinned to a specific model — it is not a universal element, so measure and match rather than assuming it fits a different Tappan oven in your kitchen.
Straightforward buy: The listing names the exact Tappan model and the exact part number it replaces, so there is no second guess.
Model-locked: It fits the TEF351EWB and not the whole Tappan family, so verify the model on your oven frame first.
Confident match: Your oven badge reads TEF351EWB and the element has gone weak or dead.
Keep looking if: Your Tappan carries a different model number — check the other bake elements below.
7. Oven Heating Element Replaces Tappan 316075103, F83-455
The throw-in-the-cart fix when all you want is a working oven again.
Dead oven, one part number, one part to buy. This element replaces Tappan 316075103 and F83-455, and it does the one job a bake element has: heat the oven cavity so the food cooks. The install is the standard two-screw swap at the rear of the oven, and shoppers say it is a straightforward change rather than a job for a repair tech.
The cost saving is the real pitch here. Buyers describe it as a strong value, with the clear appeal being that a single part keeps a working range out of the landfill rather than paying for a whole new oven. Reliability and ease of install are what buyers report working, and the part heats the cavity as it should.
The catch is quality consistency — a fair share of the feedback calls the build perfect while some finds it poor, so this is a part that lives up to its modest price rather than exceeding it. Treat it as a repair you budget for periodically rather than a lifetime replacement. The package arrives in a flat 19.8 by 19.76 by 3.03 inch box, so check it is not bent before you install it.
Where it shines
- Replaces Tappan 316075103 and F83-455 directly
- Standard screw-in install at the back of the cavity
- Budget-friendly way to avoid replacing a whole oven
Set your expectations
- Build quality is inconsistent from unit to unit
- Not a premium element — budget the price for a simple one-time fix
Priced for: The owner who wants the cheapest working fix and is happy to swap the element again if it goes.
Pay more if: You want a build you can count on for years rather than a repair you plan to redo.
8. 318255101 Oven Heating Element
The upgraded element: 304 stainless steel instead of plain steel.
When the original element in a Frigidaire, Kenmore or Tappan oven dies, you can put back the same grade of part or step up. This 318255101 replacement is built from 304 stainless steel, which resists wear and high heat better than the original-style element, and the maker states it is tested to meet or surpass OEM quality standards. It replaces 318255101, 3016246, 318255105, 3202440, 5303016246 and more.
The model list is the part to read closely. It fits models including FFEW2425LSA, FEB24S2ABA, FEB500BAB1 and FEB703BAB1, so a quick scan of your oven frame confirms it before you order. Installation needs a Phillips screwdriver, a flat screwdriver, sharp-nosed pliers and gloves, and the power must come off first. S-Union backs the part with an 18-month warranty, the longest in this round-up.
At 16 ounces it ships in a compact single box, so it can arrive tightly packed — check the element is straight before you fit it. The stainless build is a genuine upgrade over the cheaper elements here, but it shares the same limit: a bake element that works hard every day will eventually fail, and the warranty is there for exactly that.
Built to last longer: 304 stainless steel construction with a stated OEM-or-better quality spec and an 18-month warranty.
Confirm the model: It fits the named Frigidaire, Kenmore and Tappan models, so check FFEW2425LSA or FEB24S2ABA on your frame before buying.
Choose it if: You want the upgraded 304 stainless element and the longest warranty coverage in the round-up.
Double-check first: Your oven model is not on the compatibility list — then a different 318255101 option may fit better.
9. 318255101 Oven Bake Element
The economy route to the same 318255101 part number.
If your oven calls for the 318255101 element and you want the cheapest working option, this is the entry-level version. It fits Frigidaire, Gibson, Kenmore and Tappan ovens, and it replaces 318255101, 3016246, 3202440, 5303016246, 5303323865, F83-461, P141051 and P141052 — the same family of part numbers the upgraded option covers, at the bottom of the range.
The install is not complex, just careful. Kill the power, glove up, take out the oven rack, loosen the screws, pull the old element and fit the new one. The maker points to an online installation video if you want to see it done once before you try it, which is a genuinely useful touch for a first-time repair.
The honest limit is build quality versus the upgraded pick. This is high-quality-materials construction with a stated strong heating capacity, but it is not the 304 stainless build, and it lands on the value end for a reason. The 365-day warranty covers you for the first year, which is the same window the cheaper options offer rather than the longer one the premium option gives you.
Same part number, less money: Fits the 318255101 applications for Frigidaire, Gibson, Kenmore and Tappan without the upgrade cost.
Warranty reality: Covered for 365 days, which is enough to catch a defect but shorter than the 18-month coverage of the stainless pick.
Value buy for: A confirmed 318255101-compatible oven where a year of coverage is enough reassurance.
Spend up if: You want the upgraded stainless build and longer warranty — the option above covers it.
Know the Specs
Wattage and Voltage on a Coil Element
Wattage tells you how fast a coil gets hot. A 1500W 6-inch element is the smaller burner and a 2100W 8-inch element is the large one, both running on a 240-volt feed — the standard supply for an electric coil range. Matching both numbers to your stove keeps the burner heating at the rate the top was designed for.
Center Hole and Diameter on a Drip Pan
On a round gas pan, the diameter covers the burner and the center hole clears the burner head. The pans in this round-up measure 8.25 inches across with a 4-inch center hole. Measure your burner before ordering, because a pan that is close but does not clear the head will not sit flat.
Plug Style and Terminal Angle on a Surface Element
A plug-in coil element has a terminal that seats into a socket at the stove surface. The angle and shape — flat or round — must match the socket on your range. Two elements can be the same diameter and still not interchange, which is why the fit is checked by plug, not by size alone.
Igniter Type on a Gas Oven
A gas oven igniter is a heat-and-glow part that signals the gas valve to open. There is no wattage to match; the important thing is the part number and the model family. An igniter built for a Frigidaire oven family may not be the part your Tappan uses, so check the replacement list.
Common Questions
How do I know which Tappan part my range actually takes?
Can I use a Frigidaire part on a Tappan range?
What is the difference between a bake element, a surface burner element and an igniter?
Will a 6-inch coil element fit where an 8-inch one was?
How long should a replacement bake element last?
Do I need to turn off the power before installing a range part?
Why do round gas drip pans rust so quickly?
Can a replacement coil element damage my cooktop?
Will a drip pan that measures close to mine actually fit?
Is it cheaper to repair a Tappan range or replace it?
The Bottom Line
For most Tappan owners facing a dead cooktop or a cold oven, the winner is the 5304430149 / 5304430150 burner and drip pan kit. Eight parts in one box — two 6-inch 1500W coils, two 8-inch 2100W coils and four matching porcelain pans — refresh a Tappan TEF surface in a single afternoon. It is the one part here that renews the whole top rather than one burner. It is the top-rated pick in this round-up, at 4.5+ stars across a long tail of reviews.
If your oven is the problem rather than the top, the 318177710 gas igniter is the widest-fitting part for a Tappan oven that will not light. It lists Tappan among a compatibility list that runs to Frigidaire, Kenmore, GE, Roper and Hotpoint. And if a single large burner is the only thing that has quit, the 318372213 8-inch surface element is the cheapest working fix in the round-up.
One last thing worth doing before you order: write the model number from your oven frame on a slip of paper and keep it in the kitchen drawer. Every pick here fixes the range rather than replacing it, and matching that one sticker is what keeps the repair a one-time job.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.
