Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A cloudy pool is almost never the pump’s fault. It is usually a tired cartridge that has stopped catching the fine stuff, and swapping in the right replacement is the cheapest fix in pool ownership. The whole trick is matching your housing’s exact dimensions and part number — get that wrong and even a superb cartridge will bypass water and filter nothing. Below are the nine replacements that fit the most common Hayward and Pentair housings, ranked by how their real buyers report they hold up.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Every pick below was checked against its real dimensions and its compatibility list. Match the length and opening diameter to your housing and the swap takes about ten minutes. Get the part number and three dimensions right and you avoid a season of bypassed, unfiltered water.
Top Picks



How To Choose The Best Swimming Pool Filter Cartridge Replacement
A replacement cartridge is a consumable, not an upgrade. Your job is to find the one whose length, outside diameter and top and bottom openings match the housing you already own. Everything else — fabric type, pleat count, filtration area — decides how often you are out there with a hose.
Start with the part number, not the brand
Pull the old cartridge out and read the number stamped on the end cap. Numbers like CX1200RE or CX880XRE tell you exactly which housing family you have. Cross-reference lists on each product page name the aftermarket equivalents (Pleatco, Unicel, Filbur, Aladdin) so you can confirm a match in seconds. A cartridge that is a quarter-inch off can sit loose and let unfiltered water slip past the pleats.
Match the three dimensions that matter
Length, outside diameter, and the inner diameter of the top and bottom openings. A 23 5/16-inch cartridge will not seal in a housing built for a 25 1/2-inch one, and a 4-inch opening will not grip a 3-inch core. Measure your old one with a tape before you buy, then compare it to the spec line on the listing. The compatibility list is a second check, not a substitute for measuring.
Decide how much filtration area you want
Filtration area, measured in square feet, is the total surface of fabric doing the work. More area means the cartridge can trap more debris before the flow drops and you have to rinse it. A 150 sq. ft. cartridge in a housing that accepts it will stretch your cleaning interval compared with a 90 sq. ft. one. You cannot size up beyond what your housing holds, so this is a within-your-model decision.
Know what fabric type gets you
Trilobal fabric has a three-lobed fiber shape that creates more surface for debris to cling to, and it releases that debris more easily when you rinse. Standard point-bond media is flatter and clogs faster. Several picks here use trilobal, and their owners consistently report the rinse-out is quicker. Neither type survives backwashing — that is a job for a sand or DE filter, not a cartridge.
Side-by-Side Comparison
| Model | Best For | Filtration Area | Length | Top / Bottom Opening | Amazon |
|---|---|---|---|---|---|
| PA106 4-Pack (TOREAD)★ Best Overall | Hayward SwimClear C4020/C4025/C4030 owners | 4 x 106 sq. ft. | 25 1/2″ | 3″ / 3″ | Amazon |
| 120 Sq.Ft. Cartridge (Wowreed)Budget Champion | Budget swap for Hayward C1200 housings | 120 sq. ft. | 23 5/16″ | 4″ / 4″ | Amazon |
| 08055 (Cryspool)Most Versatile | Star-Clear Plus C1200 value pick | 120 sq. ft. | 23-5/16″ | 4″ / 4″ | Amazon |
| 08046 (Cryspool) | Hayward C900 and 21-foot pools | 90 sq. ft. | 17-3/8″ | 4″ / 4″ | Amazon |
| CC150 (TOREAD) | Pentair Clean and Clear 150 systems | 150 sq. ft. | 31 1/8″ | 6″ / 6″ | Amazon |
| CC100 (TOREAD) | Pentair Clean and Clear 100 systems | 100 sq. ft. | 23 5/8″ | 6″ / 6″ | Amazon |
| Unicel C-8412 | OEM-spec match for CX1200RE | 120 sq. ft. | 23 5/16″ | 4″ / 4″ | Amazon |
| 4-Pack for CCP320 (Optimum) | Clean & Clear Plus 320 four-cartridge systems | Per-cartridge spec not listed | 20″ | 3″ / 3″ | Amazon |
| POOLPURE C4030 4-Pack | SwimClear owners who want finer filtration | 106 sq. ft. each | 25 1/2″ | 3″ / 3″ | Amazon |
Detailed Reviews
1. PA106 Pool Filter 4Pack
Our pick — 4.5+★ from 450+ verified ratings; the strongest balance of quality and price.
Four cartridges that cover a whole SwimClear season in one box, so you are never caught mid-swim with a clogged filter.
If your housing is a Hayward SwimClear C4020, C4025 or C4030, this four-pack is the practical buy. Each cartridge delivers 106 sq. ft. of filtering fabric, and four of them give you the full set your housing needs. That means you rinse and rotate instead of ordering a single cartridge and waiting on shipping while the water turns.
The fabric is trilobal — a three-lobed fiber that gives debris more surface to cling to, then lets it go easily under a hose. In practice that shortens rinse day and keeps water moving between cleanings. TOREAD recommends a rinse every 2-4 weeks for best results, and with four cartridges on hand you can stay on that schedule without drama.
Quality is what wins people over here, and the fit reports back it up. One honest caveat: durability draws divided opinions, with some owners seeing them hold up beautifully and others wishing for more life. The other thing to know is a hard rule — these are not for backwashing. Backwashing can crack the end caps and total the cartridge, so rinse by hand only.
What earns the top spot
- Four cartridges at 106 sq. ft. each — a full replacement set in one box
- Trilobal fabric releases trapped debris quickly during a hose rinse
- Reinforced center support and break-resistant end caps for high-flow use
- Chlorine-resistant materials built for heavy pool traffic
Where it asks for care
- Durability is the split opinion — some owners want longer service life
- Not designed for backwashing; doing so can crack the end caps
- Only fits SwimClear housings, so measure before you commit
Reach for this if: you run a Hayward SwimClear C4020, C4025 or C4030 and want a full set of spares on the shelf.
Think twice if: your housing takes a different length — at 25 1/2″ it will not seat in a shorter body.
2. 120 Sq.Ft Pool Filter Cartridge
The lightest cartridge in this lineup at a single pound, and the easiest way to test whether a cheap swap can keep your water clear.
For a Hayward Star Clear Plus C1200 owner who just wants the water clear again without spending on a name brand, this is the low-risk entry. It carries 120 sq. ft. of filtration area and matches the 23 5/16″ length and 4″ openings your housing expects. The cross-reference list runs through CX1200RE, PA120, C-8412, FC-1293 and several others, so most C1200 family owners will find their number on it.
Here is the contrast that puts it in perspective: this one weighs 1 pound, against 17.31 pounds for the PA106 four-pack. That is the difference between a single cartridge and a box of four, and worth knowing if you are comparing weight for shipping or storage reasons. The solid end caps and support bands are what hold the pleats in place under flow.
What owners like is that it simply works with their Hayward filter — functionality is the thing people point to first. The honest split is longevity: some get a full year of constant use, others find it gives up sooner. Plan on it as a seasonal consumable rather than a lifetime part, and rinse every 2-6 weeks per the maker’s guidance.
Best use case: a C1200 owner who wants a working cartridge now and does not need a four-pack sitting in the garage.
The trade-off: longevity is genuinely mixed, so budget for replacing it more than once if you run the pool hard all summer.
Good match for: anyone chasing a low-cost swap for a Star Clear Plus C1200 housing.
Look elsewhere if: you want a set you can rotate — this ships as one cartridge.
3. 08055 Pool Filter Cartridge Replaces CX1200RE, C1200
A C1200 replacement built around a snug, wobble-free seat, because a loose cartridge just lets dirty water slip past the pleats.
Cryspool’s 08055 is the pick for a Hayward Star-Clear Plus C1200 owner who is tired of cartridges that rattle in the housing. Every unit is built to the same 23-5/16″ length, 8-15/16″ outside diameter and 4″ top and bottom openings, so it seats without gaps.
The media is trilobal fiber rather than the flatter point-bond fabric many budget cartridges use. The three-lobed shape builds a deeper filtration matrix that catches small particles while still letting water through, which keeps the pump from working as hard. Cleaning is a garden-hose job: rinse when the pressure gauge hits its mark, ideally every 2-4 weeks during swim season.
Value is what this one is known for, and the part that impresses owners of pricier setups is how close it comes to the big-name cartridges for far less. The recurring gripe is lifespan — some owners get a full season, others want more. Treat it as a consumable you replace when the flow drops, not a part you expect to last years.
Why C1200 owners pick it
- Trilobal fiber matrix catches fine particles without choking flow
- Reinforced end caps and bands resist separation under high flow
- Matches the factory 23-5/16″ length and 4″ openings exactly
- Rinses clean with a standard garden hose when the gauge rises
The honest trade-offs
- Durability is the split point — reports range from a season to less
- One cartridge per order, so no rotation set from the start
- Only for C1200-family housings; not a universal fit
The straight answer: a smart pick when your C1200 housing needs a snug seat and you want better filtration than the cheapest media offers.
Consider a four-pack instead if: you would rather swap cartridges than wait for a single replacement to arrive.
4. 08046 Pool Filter Cartridge
Short enough for the smaller Hayward C900 housing, where a longer cartridge simply will not close.
Owners of a Hayward C900 know the frustration of ordering the popular cartridge and finding it too tall. This one measures 17-3/8″ long — against 31 1/8″ on the CC150 — so it drops into the compact housing and the lid seals. Filtration area is 90 sq. ft., the least roomy of the group, which is the natural trade-off for a shorter body.
It carries 90 sq. ft. against the CC150’s 150 sq. ft., so you will rinse it more often. The same trilobal fiber is on board, and the flat point-bond alternative it replaces tends to clog faster. Rinse when the pressure gauge tells you to rather than on a fixed calendar, and you get more out of it.
What owners highlight is the fit and the price-to-clear-water ratio, and 21-foot pool setups come up again and again as a happy match. Cleaning is straightforward with a hose, and several note it performs like cartridges that cost more. Longevity is the fair caveat — some owners see it hold up well, others say it gives out sooner than they would like.
Fits the small housing: the shorter 17-3/8″ body is the whole point here, and it saves you from cutting a too-tall cartridge down to size.
Cleaning beat: expect more frequent rinse sessions at 90 sq. ft. than you would on a 150 sq. ft. cartridge.
Right for: Hayward C900 owners and smaller above-ground pools who need a shorter cartridge that seals.
Wrong for: larger housings that take a longer body — this is deliberately the compact option.
5. CC150 Pool Filter
The biggest filtration area in this lineup, built for Pentair Clean and Clear 150 owners who want fewer rinse days.
If your housing is a Pentair Clean and Clear 150, this TOREAD cartridge delivers 150 sq. ft. of filtering fabric — the largest in the group and the reason it needs rinsing less often than a 90 sq. ft. cartridge like the 08046. The 6″ top and bottom openings are double the 3″ openings on the PA106 four-pack, and they match the Pentair housing’s core precisely.
It measures 31 1/8″ long, which makes it the tallest cartridge here and the one that takes up the most cabinet space when you store a spare. The trilobal fabric and reinforced center support carry over from TOREAD’s other cartridges, and chlorine-resistant materials hold up under heavy traffic. Rinse every 2-4 weeks during the season to keep it performing.
Owners single out the build quality and how cleanly it installs. The honest split is durability: most find it built to last, but there are reports of the plastic rim cracking after about a week of use. That is a rare-issue sized caveat, not a pattern — just handle it gently on install and never backwash it, since backwashing can crack the end caps outright.
Why it suits the 150 housing
- 150 sq. ft. filtration area stretches the gap between cleanings
- 6″ openings match the Pentair Clean and Clear 150 core exactly
- Trilobal fabric and reinforced center support under high flow
- Straightforward to rinse and reinstall
Keep in mind
- Tallest cartridge here at 31 1/8″ — plan storage space
- Occasional reports of the plastic rim cracking; install with care
- Not for backwashing, which damages the end caps
Top choice for: a Pentair Clean and Clear 150 owner who wants the largest filtration area in this set.
Not the one if: your housing takes a shorter body — 31 1/8″ will not fit a smaller Pentair.
6. CC100 Pool Filter
The 100 sq. ft. middle child for Pentair owners, sized to fit the Clean and Clear 100 without the extra length of the CC150.
Pentair Clean and Clear 100 owners get a direct match here: 100 sq. ft. of fabric, a 23 5/8″ length, and 6″ top and bottom openings built for that housing. It lives between the compact 08046 at 90 sq. ft. and the larger CC150 at 150 sq. ft. If your housing is a 100, this is simply the one that fits without compromise.
The build uses a reinforced ABS end cap — ABS is a tough, impact-resistant plastic — plus a reinforced center support and the same trilobal fabric. That combination holds the pleats steady when the pump is pulling hard. Rinse every 2-4 weeks in swim season, and never backwash it; that cracks the end caps.
Build quality is the headline for this one, and the fit with 100 sq. ft. Clean and Clear models comes up over and over as a clean match. Owners mention visibly clearer water after the swap, and a garden-hose rinse takes minutes. Longevity is where opinions split, so plan for a seasonal replacement cycle rather than assuming multi-year service.
The case for it: a direct, no-modification fit for the Pentair Clean and Clear 100 family, from a maker that stocks the whole Pentair length range.
The honest catch: durability is the one thing owners disagree on — set expectations at a season and you will not be disappointed.
Match this if: your housing is a Pentair Clean and Clear 100 and you want the factory-sized replacement.
skip it if: you have a 150 housing — the 23 5/8″ body is shorter than the CC150’s.
7. Unicel C-8412 Replacement Filter Cartridge
The one that carries a specific pleat count — 172 of them — in a category where most listings stay silent on that number.
If you want to know exactly what you are buying, this is the cartridge to look at. Unicel publishes a 172 pleat count and 4-ounce Reemay 2040 filter media, and it is built to meet OEM specifications rather than approximated. For a Hayward CX1200RE, Waterway Pro Clean 125 or Clearwater II 125 owner, that level of detail is the reason to pay for the name.
Both end caps are open with molded gaskets at 4″ inner diameter, so the seal is engineered rather than friction-fit. At 120 sq. ft. it matches the area of the C1200-family cartridges here, and the 23 5/16″ length is identical too. The denser 4-ounce media stretches the gap between rinse days compared with budget point-bond cartridges.
Quality is what owners respond to, and the phrase that keeps coming up is “exact replacement” — it performs like the pricier cartridges and keeps the water clean through repeated cleaning cycles. The mixed note is durability: some find it lasts, but there are reports of cracked plastic. Handle the end caps gently and it does the job it was built for.
Where the money goes
- A documented 172 pleat count and 4-ounce Reemay 2040 media
- Molded-gasket end caps at 4″ inner diameter for a real seal
- Built to OEM specifications for the CX1200RE family
- 120 sq. ft. of area in the standard 23 5/16″ body
Worth knowing before you buy
- Durability splits — occasional reports of cracked plastic
- Premium price brings OEM-spec detail, not a longer service guarantee
- One cartridge per order
Worth the upgrade for: owners who want a documented pleat count and OEM-spec media for their CX1200RE housing.
Not worth it for: bargain hunters — the cheaper C1200 replacements above do the same basic job.
8. 4PK Pool Filters Plus 320
Four cartridges, made in the USA from 100% Reemay media, and sized short at 20″ for four-cartridge Pentair systems.
The Clean and Clear Plus 320 takes four cartridges at once, so buying them individually gets expensive fast. This set of four, each 20″ long with 3″ inside diameter and 7″ outside diameter, restocks the whole housing in one order. It is a compatible replacement for the Pentair CCP320 (part 160340) and Waterway Crystal Water 80 sq. ft. (817-0081).
The media is 100% Reemay spunbond polyester, and each cartridge carries support bands around the element to hold the pleats steady under flow. The maker lists a long cross-reference chain — Unicel C-7470, Pleatco PCC80, Filbur FC-1976 and more — so most CCP320 owners will find their part number on it. Made in the USA is the differentiator for buyers who factor that in.
Fit and effectiveness are what carry this set with owners, and the water-quality improvement is the outcome they point to. A few customers note slightly lower pump energy use once the pleats stay clean. The mixed note is sturdiness — some find it holds up well, others want more rigidity. Consider it a solid four-pack for a fair price, not a heavy-duty upgrade over the original.
Why it earns its place: it is one of the few sets here that restocks a four-cartridge housing in a single purchase, with US-made Reemay media.
What to expect: at 20″ these are shorter than the CC150, so confirm your housing before you order.
Buy this if: you own a Clean and Clear Plus 320 and want all four cartridges in one go.
Different need if: you run a two-cartridge or single-cartridge housing — this set overshoots.
9. POOLPURE C4030 Pool Filter 4-Pack
A four-pack for SwimClear owners who want the finest filtration layer the category offers.
This PoolPure set targets the same Hayward SwimClear housings as the PA106 above — same 25 1/2″ length, same 3″ openings, same 106 sq. ft. per cartridge. The difference is the filtration build: PoolPure adds a 50-micron high-efficiency layer (a micron is one thousandth of a millimeter, so 50 is very fine) on top of 4 oz. thickened polyester fabric.
It carries reinforced ABS end caps and a strengthened integrated core, and the maker says the fiber structure has a dirt-locking design that releases trapped debris on rinse. PoolPure is a PHTA member, the trade body for the pool and hot tub industry. Each cartridge in the set is individually sealed.
Quality and fit land well with owners, and the per-cartridge cost comes in below comparable Pleatco-branded stock — note if you are used to buying name-brand consumables. One trade-off is weight: at 21.1 pounds for the four-pack, it is heavier than the PA106 set at 17.31 pounds. Durability and pool-cleaning feedback are both mixed, so expect a seasonal cycle.
Fine-particle angle: the 50-micron filtration layer is the standout spec, aimed at the hair and fine dust that slips through coarser media.
Heavier box: 21.1 pounds against 17.31 pounds for the PA106 set — a small thing, but real if you store the spare cartridges in a high cupboard.
Made for: SwimClear owners who want the finest filtration layer available and a full four-cartridge set.
Reconsider if: you want the lighter box, or you have a shorter housing that will not take 25 1/2″.
Know the Specs
Filtration area in square feet
This is the total surface of pleated fabric across the whole cartridge. More area means the cartridge can hold more debris before the flow drops, so a 150 sq. ft. cartridge will run longer between rinses than a 90 sq. ft. one. It only helps if your housing is built for that size — you cannot oversize past what fits.
Length and opening diameter
Length, along with the top and bottom opening sizes, is what makes a cartridge seat properly. A 31 1/8″ cartridge in a housing built for a 17-3/8″ one will not close, and a 6″ opening will not grip a 3″ core. Measure your old cartridge before you order, then cross-check the part-number list.
Trilobal versus point-bond fabric
Trilobal fibers have a three-lobed cross-section that gives debris more surface to latch onto and lets it go more easily when you rinse. Point-bond fabric is flatter and tends to clog faster. Both work; trilobal generally means easier rinse-outs and longer cleaning intervals.
Pleat count and media weight
Pleat count is simply how many folds the fabric has, and media weight in ounces describes how thick that fabric is. A documented 172 pleats and 4-ounce Reemay media is more information than most listings give, which is useful if you want to compare on something other than brand.
Common Questions
How do I know which cartridge fits my pool filter housing?
Can I backwash a cartridge filter instead of cleaning it?
How often should I clean a replacement cartridge?
What is the difference between trilobal and point-bond filter fabric?
Does a higher filtration area really mean fewer cleanings?
Will these cartridges fit a Hayward C1200 and a Waterway Pro Clean 125?
How long does a pool filter cartridge last?
Can I clean a cartridge with bleach or acid?
Why is my water still cloudy after a new cartridge?
Is a four-pack worth it over buying singles?
The Bottom Line
The pick that covers the most common housing and the most season is the PA106 4-Pack — four trilobal cartridges at 106 sq. ft. each, sized for the Hayward SwimClear family, so you never open the housing to a bare spot. If you run a Pentair Clean and Clear 150, the CC150 gives you the largest filtration area here at 150 sq. ft. and fewer rinse days as a result. And if you want OEM-spec media with a documented 172 pleat count, the Unicel C-8412 is the one to reach for. Whatever you choose, measure your old cartridge first — length and opening diameter matter far more than the brand badge. Rinse the PA106 set every few weeks and it will carry you through a full season of clear water.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





