7 Best SBC 350 Cam Kit | Pick Duration Before You Pick Lift

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

Your 350’s cam decides how choppy the idle sounds and how well the car behaves in traffic. A rough, rumpity idle sounds incredible at a cruise night. But that same cam also wants a higher-stall torque converter (a converter that lets the engine rev before it grabs), more compression and headers to behave. Get that match wrong and your small block turns into a bucking, stalling headache in traffic. Seven kits below all physically fit a small block Chevy 350 V8. They run from mild street grinds you can bolt in behind a stock converter to big-overlap Thumpr sticks that need supporting parts. Every number below (duration, lift, lobe separation, RPM range) comes straight off the manufacturer listings.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Read the cam card in plain English before you spend a dime. Duration at.050″ tells you how long the valve stays open and how rough the idle gets. Valve lift tells you how far it opens. Lobe separation angle (the spread between intake and exhaust lobe peaks) decides whether that power lands low and smooth or high and nasty. Duration and lift are linked, but duration is the number that makes or breaks street manners. Below you’ll find a full comparison table and plain-English notes on each pick, so you can choose the best SBC 350 cam kit for your build the first time.

Top Picks

Edelbrock 2102 Performer-Plus Camshaft and Lifter Kit
Best OverallEdelbrock 2102 Performer-Plus Camshaft and Lifter Kit4.0+★100+ ratingsThe mild-mannered street grind that still feels stronger than a stock stick. This is the pick for the guy who wants more seat-of-the-pants pull from idle without turning his daily cruiser into a bucking annoyance.Check price on Amazon
SB Chevy 283 327 350 400 Hi-Perf RV Cam & Lifter Kit.480/.480 Lift - 282 Duration
Best Budget TorqueSB Chevy 283 327 350 400 Cam & Lifter Kit4.0+★Big duration, low-buck price: an RV-style grind aimed at grunt, not scream. Guardian Engine Kits built this one around a.480/.480 lift and a 282/282 duration, and it fits the small block family from the 283 through the 350 and 400.Check price on Amazon

How To Choose The Best SBC 350 Cam Kit

Start with the parts already bolted to your engine, not the cam catalog. Your converter stall, compression ratio and rear gear decide which cam you can actually run without fighting it. A cam that is too big for a stock converter will idle rough and fall on its face off the line — the opposite of what you bought it for.

Match duration to your converter and compression

Duration at.050″ is measured in crankshaft degrees while the lifter is off its base circle, and it is the clearest read on street manners. Lower numbers keep vacuum high and idle smooth behind a stock converter. Higher numbers trade that smoothness for top-end charge — and they demand a looser converter and higher compression to stay happy.

Know where lift and lobe separation push the power

Valve lift is how far the valve opens off the seat, measured in inches. More lift generally means more airflow, but it also means checking piston-to-valve clearance and spring specs. Lobe separation angle (LSA) is the spread between the intake and exhaust lobe peaks in degrees; a tighter LSA makes a choppier idle and a punchier midrange, while a wider LSA smooths things out.

Check your block generation before anything else

These kits fit Chevy GEN 1 small blocks, including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. They do not fit LT1, LT4, or factory roller small blocks built from 1985 and newer. Pop the valve cover and identify your block first — a roller block needs a different cam entirely.

Decide between a cam-and-lifter kit and a full K-Kit

A basic cam and lifter kit gives you the camshaft, lifters, instructions and assembly lubricant. A K-Kit adds valve springs, retainers, locks, valve seals and a timing set — the supporting hardware that has to match the new cam. If your heads are still wearing original springs, the fuller kit usually saves a second order.

Side-by-Side Comparison

Model Best For Duration @.050″ (Int/Exh) Valve Lift (Int/Exh) RPM Range Amazon
Edelbrock 2102 Performer-Plus★ Best Overall Stock-style street manners 204 / 214 deg 0.42 / 0.442 in — Amazon
Guardian Engine Kits Hi-Perf RVBest Budget Torque Low-buck torque build 282 / 282 deg 0.480 / 0.480 in — Amazon
COMP Cams CL12-212-2 Magnum High-RPM street machine 230 / 230 deg 0.480 / 0.480 in 2,000-6,000 Amazon

Detailed Reviews

★ Best Overall

1. Edelbrock 2102 Performer-Plus Camshaft and Lifter Kit

Our pick — 4.0+★ from 100+ verified ratings; the strongest balance of quality and price.

Hydraulic Flat TappetCast Cam

The mild-mannered street grind that still feels stronger than a stock stick.

This is the pick for the guy who wants more seat-of-the-pants pull from idle without turning his daily cruiser into a bucking annoyance. Its intake duration at.050″ is 204 degrees and its exhaust is 214 degrees — mild by the standards of everything else here. The valve lift comes in at 0.42 inches on the intake and 0.442 inches on the exhaust. The spec sheet also lists a 112-degree lobe separation angle, which is on the wide side and points straight at a smooth, vacuum-friendly idle.

Compare that to the Guardian RV kit in this list: the Edelbrock runs 204 degrees of intake duration versus 282, which is the widest gap between any two street kits here. That is exactly why the Edelbrock is the easy one to live with. It is also the lightest cam in this roundup — a cast cam and lifter set rather than a full spring-and-timing-set package.

Buyers consistently praise the casting’s finish and machine quality. Reviewers repeatedly praise the torque that pulls strong from just off idle. The honest catch is that this is a modest grind. If your goal is a real choppy lope and a big top-end charge, this kit is not that — and no amount of supporting parts will turn a 204-degree cam into a strip stick.

Where it earns its keep

  • The mildest duration here (204/214 at.050″), so the idle stays well-behaved behind a stock converter.
  • 0.42/0.442 inches of lift with a 112-degree lobe separation for a broad, smooth powerband.
  • Buyers report it as a clear step up over stock, with torque that pulls from just off idle.

The honest limitation

  • You will not get a rough strip-style idle from a 204-degree intake — this is a cruiser cam.
  • No valve springs or timing set included; plan on checking your existing hardware.

Reach for it if: you run a near-stock 350 with a stock converter and want a crisper, torquier feel without wrecking drivability.

Differently: if your build already has headers, gears and a looser converter, the extra duration in the kits below is where the power lives.

Best Budget Torque

2. SB Chevy 283 327 350 400 Cam & Lifter Kit

.480/.480 Lift282 Duration

Big duration, low-buck price: an RV-style grind aimed at grunt, not scream.

Guardian Engine Kits built this one around a.480/.480 lift and a 282/282 duration, and it fits the small block family from the 283 through the 350 and 400. For the money it is the entry ticket into the bigger-duration end of the pool, and at 12 pounds it ships lighter than several of the full K-Kits here.

Here is the number that stands out: 282 degrees of intake duration at.050″ against the Edelbrock’s 204 degrees. That is a big spread — the RV grind is hunting low-to-mid grunt, while the Edelbrock stays smooth and mild. If your 350 is a truck or a heavy cruiser that needs to pull a load, the extra duration here is working in your favor. If you want a Sunday-smooth idle, it will not give you that.

Price is the reason to pick this kit over the COMP grinds. It is the cheapest way into a performance cam-and-lifter set in this lineup, and it physically fits the 283, 305, 327, 350 and 400 GEN 1 blocks. The trade-off is sparser packaging — this is a cam-and-lifter kit, not a full spring-and-timing-set package, so check your valve springs before bolting it in.

Why it’s here: a.480/.480-lift, 282-duration RV grind that fits the whole 283-400 small block family and costs the least of the bunch. Best if you want a torquey truck or cruiser stick on a budget, not if you are chasing a smooth stock-feel idle.

Go this route if: the goal is honest low-end torque for towing or a heavy car and you want to spend the least to get there.

Think twice if: your build needs matching springs and a timing set bundled in — you will be buying those separately.

Top Performer

3. COMP Cams CL12-212-2 Cam and Lifter Kit

2,000-6,000 RPM230/230 @.050″

A 6,000-RPM street brawler that asks for a stall and gives you top-end pull.

COMP’s Magnum grind lives up to its name on paper: 230/230 duration at.050″, 0.480″/0.480″ valve lift, a 110-degree lobe separation angle and an operating range of 2,000-6,000 RPM. COMP itself calls for 2,500+ stall, headers and gears, and warns of a rough idle. Read that as a cam that wants a looser converter — bolt it behind a stock stall and you will feel it before you hit the gas.

The Magnum’s strength is the high end. It is built for aftermarket torque converters and at least 9.5:1 compression, and COMP says it is easy on valvetrain parts, so mild ratio rocker arms and traditional performance valve springs will do. The kit bundles the camshaft, a set of lifters, instructions and assembly lubricant — the essentials, nothing extra.

Where it trips people up is the idle. COMP describes it as rough, and that roughness is the price of a 110-degree lobe separation and 230 degrees of duration. It is a measured, streetable roughness rather than a full-on strip lope — but it is there, and it is the main thing to weigh if you sit in traffic a lot.

Street-machine read: 230/230 duration and 0.480-inch lift on a 110-degree LSA with a 2,000-6,000 RPM range — a classic high-RPM street grind. Best if you have a 2,500+ stall, headers and gears to match; hold off if the rest of your drivetrain is stock.

Pick this one if: you already run a looser converter and want strong charge up toward 6,000 RPM alongside an idle with attitude.

Not your cam if: you are still on the factory stall — the rough idle and converter mismatch will outshout the top-end you came for.

Biggest Street Cam

4. COMP Cams CL12-242-2 Cam and Lifter Kit

1,600-5,800 RPM224/230 @.050″

A choppy, thumping idle that COMP says still tolerates a stock converter.

This is the Thumpr grind for a street machine that wants the sound without the full strip commitment. The numbers are 227/241 duration at.050″, 0.479″/0.465″ valve lift and a tight 107-degree lobe separation angle. The operating range is 2,000-5,800 RPM, and COMP says a stock converter is acceptable, though it is best with a 2000+ converter and gears.

The full K-Kit is what separates it from a bare cam swap. COMP lists camshaft, lifters, valve springs, retainers, locks, valve seals, timing set, assembly lubricant, decals and instructions — with the standard caveat that contents vary, so confirm on the listing. That valve springs and timing set are in the box means the hardware is matched to the 227-degree grind out of the gate. Note the 21.2 pounds versus the bare RV kit’s 12 pounds, which reflects that extra hardware rather than extra cam weight.

The trade-off is audible: the tight 107-degree lobe separation and long exhaust duration make a genuinely choppy idle. This is the whole point of a Thumpr, so it wants a buyer who likes that lope. If a rough idle grates on you in daily traffic, the wider-lobe Edelbrock at the top of this list is the gentler call. Given the lope and the matched springs and timing set in the box, the price is fair.

The case for the Thumpr

  • 227/241 duration and 0.479/0.465-inch lift on a 107-degree LSA for a hard-hitting exhaust note.
  • Full K-Kit ships springs, retainers, locks, seals and a timing set in one box.
  • COMP says a stock converter is acceptable, best with a 2000+ converter and gears.

The sound you’re signing up for

  • The choppy idle is deliberate — if a smooth idle matters, look at the wider-lobe kits.
  • K-Kit contents can vary; verify the exact listing before ordering.

Made for: the street-machine owner who wants a lope, matched valvetrain parts in one box and a converter that still works as-is.

Best avoided if: you need a quiet, smooth idle for a daily commute — that is a different cam’s job.

Know the Specs

Duration at.050″

This is how many crankshaft degrees the lifter is lifted off its base circle, measured once the valve is open a full.050 inch. It is the best single read on how a cam will behave on the street. Lower duration — the Edelbrock’s 204 degrees, for instance — keeps vacuum high and the idle smooth behind a stock converter. Higher duration, like the Big Mutha’ Thumpr’s 243, trades that calm for top-end charge and a rougher idle.

Valve Lift

Lift is how far the valve opens off its seat, measured in inches. More lift usually means more airflow, but you have to check piston-to-valve clearance and that your springs support the number. The Edelbrock’s 0.42-inch intake lift is gentle on a stock valvetrain; the Big Mutha’ Thumpr’s 0.500-inch intake lift needs proper clearance checks and matched springs.

Lobe Separation Angle

This is the spread in degrees between the intake and exhaust lobe peaks. A tighter angle — 107 degrees on both Thumpr kits — makes a choppier idle and punchier midrange. A wider angle, like the Edelbrock’s 112 degrees, smooths the idle and helps vacuum. Choosing between a 107- and 112-degree LSA is about how much idle chop you want, not just peak power.

RPM Operating Range

The range the maker expects the cam to work in, such as 1,300-5,600 for the K12-238-2. A low starting number means the cam makes power early and behaves at part-throttle; a high ceiling means it pulls when you rev it. Match the range to your driving — a 1,300 RPM floor for traffic, a 6,400 RPM ceiling for strip duty.

Common Questions

Will these cam kits fit my 350 if it’s a 1985-or-newer block?
These kits fit Chevy GEN 1 small blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. They do not fit LT1, LT4, or factory roller small blocks built from 1985 and newer. Check whether your block is a factory roller first — if it is, these hydraulic flat-tappet kits are the wrong type.
Do I need a higher-stall torque converter with these cams?
It depends on the grind. The Edelbrock 2102 is mild enough for stock-style street use. The K12-600-4 Thumpr says a stock converter is acceptable but is best with a 2000+ converter. The CL12-212-2 Magnum wants 2,500+ stall, and the Big Mutha’ Thumpr wants 2800+ plus headers and gears. Match the converter to the duration you pick.
What’s the difference between a cam-and-lifter kit and a K-Kit?
A standard cam-and-lifter kit includes the camshaft, a set of lifters, instructions and assembly lubricant. A K-Kit adds valve springs, retainers, locks, valve seals and a timing set — the hardware that has to match the new cam. If your heads are still wearing original springs, the fuller kit saves a second order. COMP notes K-Kit contents vary, so confirm on the listing.
How rough will the idle be with a Thumpr cam?
Noticeably rough. The Thumpr kits run a tight 107-degree lobe separation angle with early intake opening and a long exhaust duration, which is what creates the choppy, hard-hitting exhaust note. COMP describes the Big Mutha’ Thumpr as having a very rough idle. If a smooth idle in traffic matters more to you, the wider 112-degree Edelbrock grind is the calmer pick.
Can I run the CL12-242-2 in a fuel-injected 350?
Be careful there. This cam is tuned for street carbureted applications, and buyers have run into trouble where stock computers would not support the new profile. If your 350 is still computer-controlled, do that compatibility homework before you commit. The carbureted builds that this cam is written for skip the issue entirely.
Do I need more compression with a bigger cam?
COMP recommends at least 9.5:1 compression for the CL12-212-2 Magnum and 9.5:1 for the Big Mutha’ Thumpr. Bigger cams bleed off cylinder pressure at low speed, so higher compression helps keep the bottom end alive. On a stock-compression block, a milder grind like the 204-degree Edelbrock or the 218/224 K12-238-2 is a better match.
What does duration at.050″ mean?
It is the number of crankshaft degrees the lifter stays off its base circle, measured once the valve has opened a full.050 inch. It is the clearest indicator of how a cam will behave on the street. Lower numbers keep vacuum high and the idle smooth; higher numbers — the 243 on the Big Mutha’ Thumpr, for example — buy top-end charge at the cost of a rougher idle.
Is a wider lobe separation angle better for a daily driver?
Generally, yes. A wider angle like the 112 degrees on the Edelbrock 2102 smooths the idle and helps vacuum, which is friendlier for power brakes and everyday driving. The tighter 107-degree Thumprs and the 110-degree COMP kits trade some of that calm for a punchier midrange and a choppier idle. Choose based on how much lope you want to live with.
How much does a K-Kit weigh compared to a bare cam-and-lifter kit?
The K-Kits run heavier because of the extra hardware. The K12-600-4 Thumpr K-Kit lists 21.2 pounds and the K12-238-2 lists 21.1 pounds, while the bare RV cam-and-lifter kit lists 12 pounds. That difference is the springs, retainers, locks, seals and timing set packed in the K-Kit.
Will these cams work with power brakes?
Vacuum is the deciding factor. Wider-lobe, lower-duration grinds like the Edelbrock 2102 keep more vacuum and are the friendliest for power brakes. COMP notes that its Xtreme Energy 224/230 grind makes more vacuum, which allows extra duration while still assisting power brakes. On the most aggressive Thumpr, vacuum drops and power-brake feel can suffer.

The Bottom Line

For most street-driven 350 builds, the sbc 350 cam kit winner is the Edelbrock 2102 Performer-Plus. Its 204/214 duration at.050″ and 112-degree lobe separation angle keep the idle smooth and the vacuum strong, so it works behind a stock converter — and the casting quality is what buyers talk about most.

If you have headers, gears and a looser converter and want top-end charge toward 6,000 RPM, the COMP Cams CL12-212-2 Magnum is the one to grab. And if a choppy exhaust note and matched valvetrain hardware in a single box are the goal, reach for the COMP Cams K12-600-4 Thumpr K-Kit.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top