Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your Samsung fridge is fine — it’s the ice bucket inside it that cracked, jammed, or stopped dispensing. The part number molded into your old bucket decides whether the new one fits — not the size or brand name on the listing. This guide walks you through which bucket fits which Samsung model series and which ones owners keep re-buying.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
A cracked auger or a bucket that will not crush ice is a fixable annoyance, not a dead refrigerator. Below you will find the samsung ice bucket replacement that lines up with your exact model number and the ice you actually use.
Top Picks


How To Choose The Best Samsung Ice Bucket Replacement
An ice bucket replacement is a plastic bin with an auger inside it — the auger is the spiral screw that grabs cubes and pushes them toward the dispenser door. If the bin cracked, the auger snapped, or the chute stopped opening, a new assembly restores the whole function in one part. Picking correctly is about matching numbers, not reading marketing.
Find your part number before anything else
Pull the old bucket out and read the number molded into the plastic. DA61-05300A and DA97-20156B and DA97-14474C are three completely different shapes, and they do not interchange. Listings that look identical on a phone screen often have the snap ring (the plastic clip that locks the bucket into the freezer rail) in a different spot.
Match the whole series, not one model
Samsung reuses one bucket across many model codes. A DA61-05300A bucket, for example, covers a long run of RF260, RF261, RF263 and RF28 series refrigerators. Read the compatible-model list in the listing and confirm your full model code appears, including the slash and the AA suffix.
Decide if you need OEM or a compatible part
Genuine Samsung parts are made to the factory drawing. Compatible parts are made by third parties that state they meet or exceed that drawing. Both routes work — the difference shows up in material thickness, the auger, and how long the bucket lasts under daily crushing.
Check whether you have a bucket or a full auger assembly
Some refrigerators only need the plastic bin. Others need the bin plus the auger and latch plate as one unit. Buying the smaller bin when your auger is snapped leaves you with a working bin and no crushed ice, so confirm which failure you have first.
Side-by-Side Comparison
| Model | Best For | Part Number | Dimensions | Weight | Amazon |
|---|---|---|---|---|---|
| Samsung DA61-05300A Genuine OEM Case Ice Cube★ Best Overall | Exact factory fit | DA61-05300A | 15″L x 11″W x 5″H | 12 ounces | Amazon |
| DA61-05300A Ice CubeCompact Pick | Tight freezer spaces | DA61-05300A | 14.3″L x 10.5″W x 4″H | — | Amazon |
| Upgraded Lifetime Appliance DA61-05300A Ice Cube Container | Light daily use | LAP61248 (DA61-05300A) | — | 8 ounces | Amazon |
| Samsung DA61-05358A Refrigerator Ice Container | DA61-05358A models | DA61-05358A | — | — | Amazon |
| DA97-14474C, DA97-14474A, DA97-12604D Ice Container | Restoring crushed ice | DA97-14474C | 18.19in x 10.24in x 5.43in | 4.4 pounds | Amazon |
| Upgraded DA97-20156B Refrigerator Ice Bucket | Reinforced auger build | DA97-20156B | 18″ total length | — | Amazon |
| DA97-14504C, DA97-14504A Ice Container | Compact side-by-sides | DA97-14504C | 13.97″ total length | — | Amazon |
Detailed Reviews
1. Samsung DA61-05300A Genuine OEM Case Ice Cube Refrigerator
Our pick — 4.5+★ from 350+ verified ratings; the strongest balance of quality and price.
The factory part with the factory fit, and the safest bet for a long list of Samsung models.
This is the bucket Samsung itself builds, sold under the DA61-05300A part number. It drops into the freezer rail without trimming, bending, or filing, because the snap ring sits exactly where the refrigerator expects it. If your fridge is a workhorse and you want to do this repair once, the genuine part is the least risky place to spend.
The fit is what wins people over — the bucket slides into the tray and seats cleanly, and the freezer rail locks it in the way the old one did. Owners lean on this thing daily and it holds cubed ice without the bin bowing or cracking at the corners. It measures 15″L x 11″W x 5″H and weighs 12 ounces, versus the DA61-05300A-compatible Lifetime Appliance bin at 8 ounces.
The compatible-model list is enormous: RF323TEDBSR, F261BEAESR, RF261BEAESR, RF28HDEDTSR, RF263TEAESR, and a long tail of RF260 and RF28 variants. Read it carefully rather than skimming it. The honest catch is material cost — the DA61 unit is priced like a factory part, and the Lifetime Appliance version costs less for the same footprint. That trade only matters if your old bucket failed young and you expect a repeat.
What earns the top spot
- Snap ring positioned to the factory drawing, so it locks into the rail without fiddling
- Holds cubes without the bin flexing — thicker walls than the 8-ounce DA61 alternative
- Covers a long run of RF260, RF261, RF263 and RF28 model codes in one part number
Where the value argument thins
- You are paying factory-part money for a plastic bin — the compatible version runs lower
- If your part number differs by even one character, this is the wrong bucket
Reach for this if: you have a DA61-05300A refrigerator and you want the repair done in one shot with no fitting games.
Look elsewhere if: your fridge’s bucket number carries a DA97 prefix — this part will not connect to that auger.
2. DA61-05300A Ice Cube
A slightly trimmed bucket that buys back freezer clearance and arrives with a two-year warranty.
Where the genuine Samsung bin runs 15″L x 11″W x 5″H, this compatible version measures 14.3″L x 10.5″W x 4″H. In a packed upright freezer, that smaller footprint can be the difference between the bucket sliding in freely and fighting the shelf above it. The bucket is molded in white plastic and holds cubes in a rectangular bin.
Part numbers are where this listing earns its keep. It explicitly names what it replaces — PD00005819, 2033999, AP4444534, PS4144897, EAP4144897 — and it also names the near-misses that will not fit: 240385201, DA61-03189A, DA97-17589A, DA61-05358A. Those look-alike numbers are exactly where most buyers get burned, so having them spelled out saves a return.
The compatible model list is long but not identical to the genuine part’s list, so check your code by name. The two-year manufacturer warranty is a longer stated term than most of the alternatives here offer. Set that against the shorter real-world track record — this is a newer listing — and it reads as a sensible pick for a freezer where space is tight.
Space matters here: If your old bucket came out grudgingly because it scraped the shelf, the smaller 14.3″ x 10.5″ x 4″ size is a genuine comfort upgrade.
Suits: the buyer who measured the cavity and needs a slightly shorter bin, and anyone who wants a stated warranty behind a plastic part.
Second thought: confirm your exact model code appears on the compatible list — this bucket does not carry the genuine part’s full model range.
3. DA61-05300A Ice Bucket Tray
The eight-ounce plastic bin that keeps a DA61-05300A fridge running without the factory-part bill.
Eight ounces of plastic is the headline here, versus the genuine Samsung DA61-05300A bucket at 12 ounces. A lighter bin is easier to lift out for a rinse and puts less strain on the freezer rail. The trade is straightforward: thinner material gives less resistance if something heavy lands on the bucket during a freezer rearrangement.
The manufacturer states the materials are made to exceed OEM specifications, and the bucket is sold as a non-OEM replacement under part LAP61248 for the DA61-05300A reference. Fit is the whole point of this part, and the bucket seats into the tray and drops in as expected for the RF260, RF261, RF263, RF28 and RFG298 codes it lists. The RF260BEAEBC, RF261BEAESP, RF263TEAEBC and RF323TEDBSR codes all appear on its list.
Where this pick earns trust is the return promise — Lifetime Appliance states that for any reason you can send it back, no questions asked. On a part where the snap ring position decides everything, that policy is worth more than any spec line. If the bucket arrives and the rail clip lands wrong for your fridge, you are not stuck holding it.
The honest limitation: the eight-ounce build flexes more than the factory bin, so treat the rim gently when you pull it out full of cubes.
Fits best: a DA61-05300A refrigerator where you want the repair cheaply and you value a no-questions return over factory material.
The trade-off: an eight-ounce bin versus the genuine 12-ounce part, so it is not the pick for a freezer that gets shoved around a lot.
4. Samsung DA61-05358A Refrigerator Ice Container
Not the popular DA61-05300A — a different Samsung part for a narrower group of fridges.
If your bucket carries DA61-05358A rather than the 05300A number, this is the one in the family that matches. It is listed as an O.E.M. Authorized part from Samsung, sold as model 9609866. The same part number deliberately appears on the compact DA61 bucket above as a “do not buy if you have this number” warning — a reminder that these two plastic bins are not interchangeable.
The container lands in the freezer and holds ice as intended, and it is the fit that keeps this part doing its job. It is molded in plastic, white finish, sold as one unit. Because the container carries Samsung’s own OEM authorization, the snap ring and rail position match the factory drawing rather than a third party’s interpretation of it.
The honest caveat here is the price-to-material read. The plastic is the same grade as the other Samsung bins, but the part costs at the top of the DA61 family and there is no lighter-weight alternative for the 05358A code in this lineup. Do not buy this because it is a Samsung part — buy it because your old bucket says 05358A on it. That single number is the whole justification.
Only if the number matches: this part is the right answer for one exact code, and a wasted order for every other one.
Buy this if: the bucket in your hand is stamped DA61-05358A, and you would rather have the OEM-authorized part than a look-alike.
Leave it if: you are not certain of your part number — the 05300A and 05358A bins are not swappable.
5. DA97-14474C, DA97-14474A, DA97-12604D Ice Container
For refrigerators where crushed ice stopped working and the old barrel has gone stiff.
This is the part to look at when the symptom is not a cracked bin but a fridge that has stopped crushing ice, or a bucket where thick ice will not pull free. It replaces DA97-14474C, DA97-14474A, DA97-12604D, and several AP and PS cross-reference numbers. It is also sold under model DA97-14474C by Knocokie.
Size is the number that settles most orders. The barrel runs 18.19in x 10.24in x 5.43in, and the listing asks buyers to measure before buying rather than trust the model name alone. It weighs 4.4 pounds — heavier than the DA61 bins, because this one carries the auger assembly inside it, not just the plastic tub. A heavier assembly is what you want when the failure you are fixing is a snapped or jammed auger.
The list of parts this does NOT fit is long and worth reading twice: DA97-14474B, DA97-14474D, DA82-01396A, DA82-01397A, DA97-13717A, DA97-14504A, DA97-14504C, DA97-12604A. The 14504C exclusion matters because it looks close — the Garsoo pick below is that part. If your fridge uses 14504C, this 14474C bucket is the wrong order.
Reviews split on durability under crush load: the auger and barrel hold up for most buyers, but a minority report early failure under heavy daily use. Weigh that against the fit-and-function praise and it reads as a solid pick for a household that primarily uses cubed ice, less so for a big family that crushes every single glass.
What it fixes
- Restores crushed ice when the barrel body has cracked or the auger has broken
- Larger 4.4-pound assembly than the DA61 bins, because it carries the auger inside
- Listing names the excluded part numbers, so you can spot a mismatch before ordering
The real watch-out
- Durability is the mixed note in the feedback — a few barrels give out early under constant crushing
- Does not fit any 14504-series refrigerator; that is a different bucket entirely
Right for: a fridge where the symptoms are no crushed ice, no ice, or a cracked barrel body, on a 14474C-series model.
Wrong for: anyone whose bucket number ends in 14504 or 20156B — those use a differently sized auger assembly.
6. DA97-20156B Ice Bucket
A bucket built to outlast the original, with a beefed-up auger and a spare latch plate in the box.
Thickened blades and a reinforced rear section are the point of this build. Original Samsung buckets are known for snapping the auger after a few years of crushing, and this listing targets that failure with heavier material at both the blade end and the mount. The dispenser chute opens and closes cleanly, so cubed and crushed both come out the way they should.
Replacement quality is what wins people over here — this thing is built heavier than the part it replaces, and the auger rotates without sticking or grinding. The 18″ total length is the number to check against your old bucket before ordering. It does not fit DA97-14474C or DA97-14504C refrigerators, which is a hard boundary, not a suggestion.
You get the bucket plus the latch plate in the box, which saves a second order if your old clip was the part that broke. The fit is clean once you are on the right model — the RF28HMEDBSR, RF27T5201SR, RF27T5501SR, RF28R7201SR, RF28R7351SR and RF28K9070SR codes all appear on the compatible list. It is the strongest pick in the DA97 family for a household that runs crushed ice all day and does not want to replace the bucket again.
Why it stands out: the augmented auger and included latch plate make this the pick to trust in a house where the dispenser runs constantly.
Best for: an RF28 or RF27-series fridge where the auger snapped and you want a reinforced part plus the latch plate in one order.
Check first: your bucket must be a 20156-series part — the 14474C and 14504C refrigerators are excluded outright.
7. DA97-14504C Ice Container
A shorter 13.97-inch assembly for the compact Samsung side-by-sides that larger buckets overshoot.
This one is for the refrigerators the big DA97 buckets ignore. The DA97-14504C assembly measures 13.97″ total length — noticeably shorter than the 18″ DA97-20156B bucket above — and it is built for smaller-size Samsung refrigerators that would not fit that longer barrel. The chute opens and closes more smoothly than the original part, so dispensing cubed and crushed both work.
The model list is the whole pitch: RF23J9011SR, RF23HTEDBSR, RF22KREDBSR, RF24FSEDBSR, RF23R6201SR, RF22K9381SR and the wider RF22 and RF23 families. It replaces DA97-14504C, DA97-14504A, 4546318, AP6039681, PS11773414 and EAP11773414. Note the exclusions the listing names — DA82-01396A, DA97-20156B, DA82-01397A and DA97-14474D buckets are all the wrong size.
The material is food-grade plastic, sold as an upgraded assembly with a better process at the joints, per the manufacturer. It is not a bucket that has been in circulation long enough to have a deep durability record, so the honest read is that the auger and blades have held up for most buyers but a minority report loose or broken parts. It is light to handle and installs by pulling the old bucket out and sliding the new one in.
The sizing risk: buy only after you have measured the cavity and confirmed 13.97″ is right — this assembly will not stretch to fit a larger side-by-side.
Reach for this if: your fridge is an RF22 or RF23 series compact side-by-side, and your part number ends in 14504C or 14504A.
Not for: anyone on a 20156B or 14474C refrigerator — the auger and latch hardware are a different size.
Know the Specs
Part number, the one check that matters
Every ice bucket replacement for a Samsung refrigerator is defined by the part number molded into the plastic. DA61-05300A, DA61-05358A, DA97-14474C, DA97-20156B and DA97-14504C are not interchangeable, even when the bins look identical on a screen. Read the number off your old bucket, then confirm the listing names it as a replacement.
Dimensions and the 18-inch check
Two working numbers come up again and again. The DA61-05300A bucket is 15″L x 11″W x 5″H, the DA61-compatible Ratiekc bin is 14.3″L x 10.5″W x 4″H, and the DA97-20156B assembly is 18″ long overall. The DA97-14504C assembly is 13.97″ long. If the number does not roughly match your freezer bay, the bucket will not seat or will not reach the dispenser.
The auger and the chute
The auger is the spiral screw that pushes cubes toward the dispenser. When it snaps, you get no crushed ice even with a full bucket. The chute is the flip door the ice drops through, and a stiff chute is why crushed ice stops dispensing before the auger fails. Buying an assembly with the auger included fixes both at once.
OEM versus compatible parts
A genuine OEM part is made by Samsung to the factory drawing. A compatible part is made by a third party that states it meets or exceeds that drawing. Both work, but the difference shows up in wall thickness — the genuine DA61-05300A bucket weighs 12 ounces, while the Lifetime Appliance version is 8 ounces of plastic. Heavier usually means more resistance to cracking and a gentler life on the auger.
Common Questions
How do I find the part number on my Samsung ice bucket?
Will a DA61-05300A bucket fit my DA97 refrigerator?
How long does a Samsung ice bucket replacement usually last?
Do I need to replace the auger when I replace the ice bucket?
What is the difference between an OEM Samsung part and a compatible replacement?
Why is my new ice bucket not dispensing crushed ice?
How do I measure my freezer bay before buying an ice bucket?
Does the ice bucket replacement come with a warranty?
Can I install a new ice bucket myself without a technician?
The Bottom Line
For most Samsung owners, the samsung ice bucket replacement winner is the Samsung DA61-05300A Genuine OEM Case Ice Cube because it drops into a long list of RF260, RF261, RF263 and RF28 refrigerators with the factory snap ring in the right spot. If your original auger snapped and you want a reinforced part with a latch plate in the box, reach for the DA97-20156B Upgraded Ice Bucket. And for that smaller RF22 or RF23 side-by-side, the DA97-14504C Assembly is the part that fits.
Start every order with one move: pull the old bucket up and read the part number off the plastic. That number, not the model name on the fridge door, decides which of these seven buckets actually drops into your freezer and which one becomes a return.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




